From 843a2654bce74192de2b5a43474fdc27a572ab40 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 27 Mar 2009 23:26:42 +0100 Subject: at91sam9: add watchdog support Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- doc/README.at91 | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'doc/README.at91') diff --git a/doc/README.at91 b/doc/README.at91 index e460e66..9b4eae6 100644 --- a/doc/README.at91 +++ b/doc/README.at91 @@ -2,6 +2,7 @@ Atmel AT91 Evaluation kits http://atmel.com/dyn/products/tools.asp?family_id=605#1443 +I. Board mapping & boot media ------------------------------------------------------------------------------ AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK ------------------------------------------------------------------------------ @@ -86,3 +87,13 @@ Environment variables make at91sam9263ek_config - use data flash (spi cs0) (default) make at91sam9263ek_nandflash_config - use nand flash make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0) + +II. Watchdog support + + For security reasons, the at91 watchdog is running at boot time and, + if deactivated, cannot be used anymore. + If you want to use the watchdog, you will need to keep it running in + your code (make sure not to disable it in AT91Bootstrap for instance). + + In the U-Boot configuration, the AT91 watchdog support is enabled using + the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options. -- cgit v1.1