From c8d76eaf606096eddbe62b8a86545f5116f5189c Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Mon, 18 Oct 2010 23:43:37 +0200 Subject: Rename TEXT_BASE: fix merge conflicts Commit 14d0a02a "Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE" missed a few places, especially for boards that were added inbetween. Fix the remaining issues. Signed-off-by: Wolfgang Denk --- doc/README.arm-relocation | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) (limited to 'doc/README.arm-relocation') diff --git a/doc/README.arm-relocation b/doc/README.arm-relocation index 4ab3c7c..e9fe999 100644 --- a/doc/README.arm-relocation +++ b/doc/README.arm-relocation @@ -92,11 +92,11 @@ Relocation with NAND_SPL (example for the tx25): the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution @CONFIG_SYS_NAND_U_BOOT_START -- This u-boot does no ram int, nor cpu register setup. Just looks - where it have to relocate and relocate itself to this address. - If relocate address = CONFIG_SYS_TEXT_BASE(not the same, as the TEXT_BASE - from the nand_spl code), no need to copy, just go on with bss clear - and jump to board_init_r. +- This u-boot does no RAM init, nor CPU register setup. Just look + where it has to copy and relocate itself to this address. If + relocate address = CONFIG_SYS_TEXT_BASE (not the same, as the + CONFIG_SYS_TEXT_BASE from the nand_spl code), then there is no need + to copy, just go on with bss clear and jump to board_init_r. ------------------------------------------------------------------------------------- -- cgit v1.1