From 864aa6a6a466fcb92bf32b1d7dba79cd709b52c9 Mon Sep 17 00:00:00 2001 From: Grzegorz Wianecki Date: Sun, 29 Apr 2007 14:01:54 +0200 Subject: [PATCH] Use PVR to distinguish MPC5200B from MPC5200 in boot message MPC5200B systems are incorrectly reported as MPC5200 in U-Boot start-up message. Use PVR to distinguish between the two variants, and print proper CPU information. Signed-off-by: Grzegorz Wianecki Signed-off-by: Bartlomiej Sieka Signed-off-by: Grant Likely --- cpu/mpc5xxx/cpu.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'cpu') diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 813aa79..73b166d 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -53,12 +53,16 @@ int checkcpu (void) #else svr = get_svr(); pvr = get_pvr(); - switch (SVR_VER (svr)) { - case SVR_MPC5200: - printf ("MPC5200"); + + switch (pvr) { + case PVR_5200: + printf("MPC5200"); + break; + case PVR_5200B: + printf("MPC5200B"); break; default: - printf ("MPC52?? (SVR %08x)", svr); + printf("Unknown MPC5xxx"); break; } -- cgit v1.1 From 2f550ab976405300f5b07bf2890800840d0aa05f Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Sat, 5 May 2007 08:12:30 +0200 Subject: 5xxx: write MAC address to mac-address and local-mac-address Some device trees have a mac-address property, some have local-mac-address, and some have both. To support all of these device trees, ftp_cpu_setup() should write the MAC address to mac-address and local-mac-address, if they exist. Signed-off-by: Timur Tabi Acked-by: Grant Likely --- cpu/mpc5xxx/cpu.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'cpu') diff --git a/cpu/mpc5xxx/cpu.c b/cpu/mpc5xxx/cpu.c index 73b166d..1eac2bb 100644 --- a/cpu/mpc5xxx/cpu.c +++ b/cpu/mpc5xxx/cpu.c @@ -131,5 +131,9 @@ ft_cpu_setup(void *blob, bd_t *bd) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); + + p = ft_get_prop(blob, "/" OF_SOC "/ethernet@3000/local-mac-address", &len); + if (p != NULL) + memcpy(p, bd->bi_enetaddr, 6); } #endif -- cgit v1.1 From 644e6fb4eb8be90ea04ba34b643a8bf019d680e0 Mon Sep 17 00:00:00 2001 From: mushtaq khan Date: Mon, 30 Apr 2007 15:57:22 +0530 Subject: Fixes bug clearing the bss section for i386 Hi, There is a bug in the code of clearing the bss section for processor i386.(File: cpu/i386/start.S) In the code, bss_start addr (starting addr of bss section) is put into the register %eax, but the code which clears the bss section refers to the addr pointed by %edi. This patch fixes this bug by putting bss_start into %edi register. Signed-off-by: Mushtaq Khan --- cpu/i386/start.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/i386/start.S b/cpu/i386/start.S index afcbb24..1a54dd1 100644 --- a/cpu/i386/start.S +++ b/cpu/i386/start.S @@ -149,7 +149,7 @@ data_ok: .progress3: /* clear bss section in ram, size must be 4-byte aligned */ - movl $_i386boot_bss_start, %eax /* BSS start */ + movl $_i386boot_bss_start, %edi /* MK_CHG BSS start */ movl $_i386boot_bss_size, %ecx /* BSS size */ movl %ecx, %eax andl $3, %eax -- cgit v1.1 From 255a3577c848706441daee0174543efe205a77f8 Mon Sep 17 00:00:00 2001 From: Kim Phillips Date: Wed, 16 May 2007 16:52:19 -0500 Subject: Reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx For all practical u-boot purposes, TSECs don't differ throughout the mpc8[356]xx families; reduce CONFIG_MPC8YXX_TSECx to CONFIG_TSECx. Signed-off-by: Kim Phillips --- cpu/mpc83xx/cpu.c | 8 ++++---- cpu/mpc85xx/cpu.c | 2 +- cpu/mpc86xx/cpu.c | 8 ++++---- 3 files changed, 9 insertions(+), 9 deletions(-) (limited to 'cpu') diff --git a/cpu/mpc83xx/cpu.c b/cpu/mpc83xx/cpu.c index e078f27..841fe82 100644 --- a/cpu/mpc83xx/cpu.c +++ b/cpu/mpc83xx/cpu.c @@ -415,7 +415,7 @@ static const struct { "clock-frequency", fdt_set_busfreq }, -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 { "/" OF_SOC "/ethernet@24000, "mac-address", fdt_set_eth0 @@ -425,7 +425,7 @@ static const struct { fdt_set_eth0 }, #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 { "/" OF_SOC "/ethernet@25000, "mac-address", fdt_set_eth1 @@ -525,7 +525,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#ifdef CONFIG_MPC83XX_TSEC1 +#ifdef CONFIG_TSEC1 p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); @@ -535,7 +535,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enetaddr, 6); #endif -#ifdef CONFIG_MPC83XX_TSEC2 +#ifdef CONFIG_TSEC2 p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet1addr, 6); diff --git a/cpu/mpc85xx/cpu.c b/cpu/mpc85xx/cpu.c index 7735a52..1d791c9 100644 --- a/cpu/mpc85xx/cpu.c +++ b/cpu/mpc85xx/cpu.c @@ -280,7 +280,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_MPC85XX_TSEC1) +#if defined(CONFIG_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p) memcpy(p, bd->bi_enetaddr, 6); diff --git a/cpu/mpc86xx/cpu.c b/cpu/mpc86xx/cpu.c index a33acfe..9456471 100644 --- a/cpu/mpc86xx/cpu.c +++ b/cpu/mpc86xx/cpu.c @@ -278,7 +278,7 @@ ft_cpu_setup(void *blob, bd_t *bd) if (p != NULL) *p = cpu_to_be32(clock); -#if defined(CONFIG_MPC86XX_TSEC1) +#if defined(CONFIG_TSEC1) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@24000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enetaddr, 6); @@ -287,7 +287,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enetaddr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC2) +#if defined(CONFIG_TSEC2) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@25000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet1addr, 6); @@ -296,7 +296,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enet1addr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC3) +#if defined(CONFIG_TSEC3) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@26000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet2addr, 6); @@ -305,7 +305,7 @@ ft_cpu_setup(void *blob, bd_t *bd) memcpy(p, bd->bi_enet2addr, 6); #endif -#if defined(CONFIG_MPC86XX_TSEC4) +#if defined(CONFIG_TSEC4) p = ft_get_prop(blob, "/" OF_SOC "/ethernet@27000/mac-address", &len); if (p != NULL) memcpy(p, bd->bi_enet3addr, 6); -- cgit v1.1 From fba3fb0449b8a54542aed1e729de76e7f5a2ff1b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Monin?= Date: Fri, 8 Jun 2007 09:55:24 +0200 Subject: [PATCH] fix gpio setting when using CFG_440_GPIO_TABLE Set the correct value in GPIOx_TCR when configuring the gpio with CFG_440_GPIO_TABLE. Signed-off-by: Benoit Monin Signed-off-by: Stefan Roese --- cpu/ppc4xx/gpio.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index dd84e58..fb0f575 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -157,12 +157,12 @@ void gpio_set_chip_configuration(void) switch (gpio_tab[gpio_core][i].alt_nb) { case GPIO_SEL: if (gpio_core == GPIO0) { - reg = in32(GPIO0_TCR) | (0x80000000 >> (j)); + reg = in32(GPIO0_TCR) | (0x80000000 >> (i)); out32(GPIO0_TCR, reg); } if (gpio_core == GPIO1) { - reg = in32(GPIO1_TCR) | (0x80000000 >> (j)); + reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } -- cgit v1.1 From dbca208518e5e7f01a6420588d1cd6e60db74c2b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Thu, 14 Jun 2007 11:14:32 +0200 Subject: [ppc4xx] Extend program_tlb() with virtual & physical addresses Now program_tlb() allows to program a TLB (or multiple) with different virtual and physical addresses. With this change, now one physical region (e.g. SDRAM) can be mapped 2 times, once with caches diabled and once with caches enabled. Signed-off-by: Stefan Roese --- cpu/ppc4xx/44x_spd_ddr.c | 4 +-- cpu/ppc4xx/44x_spd_ddr2.c | 4 +-- cpu/ppc4xx/tlb.c | 77 +++++++++++++++++++++++++++-------------------- 3 files changed, 48 insertions(+), 37 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index c500d3f..fe7bbab 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -262,7 +262,7 @@ typedef struct bank_param BANKPARMS; #ifdef CFG_SIMULATE_SPD_EEPROM extern unsigned char cfg_simulate_spd_eeprom[128]; #endif -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); static unsigned char spd_read(uchar chip, uint addr); static void get_spd_info(unsigned long *dimm_populated, @@ -373,7 +373,7 @@ long int spd_sdram(void) { #ifdef CONFIG_PROG_SDRAM_TLB /* this define should eventually be removed */ /* and program tlb entries for this size (dynamic) */ - program_tlb(0, total_size, MY_TLB_WORD2_I_ENABLE); + program_tlb(0, 0, total_size, MY_TLB_WORD2_I_ENABLE); #endif /* diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 48b9ee2..874cec0 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -144,7 +144,7 @@ typedef enum ddr_cas_id { * Prototypes *-----------------------------------------------------------------------------*/ static unsigned long sdram_memsize(void); -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value); +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value); static void get_spd_info(unsigned long *dimm_populated, unsigned char *iic0_dimm_addr, unsigned long num_dimm_banks); @@ -528,7 +528,7 @@ long int initdram(int board_type) dram_size = sdram_memsize(); /* and program tlb entries for this size (dynamic) */ - program_tlb(0, dram_size, MY_TLB_WORD2_I_ENABLE); + program_tlb(0, 0, dram_size, MY_TLB_WORD2_I_ENABLE); /*------------------------------------------------------------------ * DQS calibration. diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index 50344a4..6c916ef 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -36,7 +36,8 @@ typedef struct region { unsigned long tlb_word2_i_value; } region_t; -static int add_tlb_entry(unsigned long base_addr, +static int add_tlb_entry(unsigned long phys_addr, + unsigned long virt_addr, unsigned long tlb_word0_size_value, unsigned long tlb_word2_i_value) { @@ -55,9 +56,9 @@ static int add_tlb_entry(unsigned long base_addr, return -1; /* Second, create the TLB entry */ - tlb_word0_value = TLB_WORD0_EPN_ENCODE(base_addr) | TLB_WORD0_V_ENABLE | + tlb_word0_value = TLB_WORD0_EPN_ENCODE(virt_addr) | TLB_WORD0_V_ENABLE | TLB_WORD0_TS_0 | tlb_word0_size_value; - tlb_word1_value = TLB_WORD1_RPN_ENCODE(base_addr) | TLB_WORD1_ERPN_ENCODE(0); + tlb_word1_value = TLB_WORD1_RPN_ENCODE(phys_addr) | TLB_WORD1_ERPN_ENCODE(0); tlb_word2_value = TLB_WORD2_U0_DISABLE | TLB_WORD2_U1_DISABLE | TLB_WORD2_U2_DISABLE | TLB_WORD2_U3_DISABLE | TLB_WORD2_W_DISABLE | tlb_word2_i_value | @@ -81,7 +82,9 @@ static int add_tlb_entry(unsigned long base_addr, return 0; } -static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, +static void program_tlb_addr(unsigned long phys_addr, + unsigned long virt_addr, + unsigned long mem_size, unsigned long tlb_word2_i_value) { int rc; @@ -91,70 +94,78 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, while (mem_size != 0) { rc = 0; /* Add the TLB entries in to map the region. */ - if (((base_addr & TLB_256MB_ALIGN_MASK) == base_addr) && + if (((phys_addr & TLB_256MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_256MB_SIZE)) { /* Add a 256MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { mem_size -= TLB_256MB_SIZE; - base_addr += TLB_256MB_SIZE; + phys_addr += TLB_256MB_SIZE; } - } else if (((base_addr & TLB_16MB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16MB_SIZE)) { /* Add a 16MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { mem_size -= TLB_16MB_SIZE; - base_addr += TLB_16MB_SIZE; + phys_addr += TLB_16MB_SIZE; } - } else if (((base_addr & TLB_1MB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1MB_SIZE)) { /* Add a 1MB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { mem_size -= TLB_1MB_SIZE; - base_addr += TLB_1MB_SIZE; + phys_addr += TLB_1MB_SIZE; } - } else if (((base_addr & TLB_256KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_256KB_SIZE)) { /* Add a 256KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { mem_size -= TLB_256KB_SIZE; - base_addr += TLB_256KB_SIZE; + phys_addr += TLB_256KB_SIZE; } - } else if (((base_addr & TLB_64KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_64KB_SIZE)) { /* Add a 64KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { mem_size -= TLB_64KB_SIZE; - base_addr += TLB_64KB_SIZE; + phys_addr += TLB_64KB_SIZE; } - } else if (((base_addr & TLB_16KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16KB_SIZE)) { /* Add a 16KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { mem_size -= TLB_16KB_SIZE; - base_addr += TLB_16KB_SIZE; + phys_addr += TLB_16KB_SIZE; } - } else if (((base_addr & TLB_4KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_4KB_SIZE)) { /* Add a 4KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { mem_size -= TLB_4KB_SIZE; - base_addr += TLB_4KB_SIZE; + phys_addr += TLB_4KB_SIZE; } - } else if (((base_addr & TLB_1KB_ALIGN_MASK) == base_addr) && + } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1KB_SIZE)) { /* Add a 1KB TLB entry */ - if ((rc = add_tlb_entry(base_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { + if ((rc = add_tlb_entry(phys_addr, virt_addr, + TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { mem_size -= TLB_1KB_SIZE; - base_addr += TLB_1KB_SIZE; + phys_addr += TLB_1KB_SIZE; } } else { printf("ERROR: no TLB size exists for the base address 0x%0X.\n", - base_addr); + phys_addr); } if (rc != 0) printf("ERROR: no TLB entries available for the base addr 0x%0X.\n", - base_addr); + phys_addr); } return; @@ -166,16 +177,16 @@ static void program_tlb_addr(unsigned long base_addr, unsigned long mem_size, * Common usage for boards with SDRAM DIMM modules to dynamically * configure the TLB's for the SDRAM */ -void program_tlb(u32 start, u32 size, u32 tlb_word2_i_value) +void program_tlb(u32 phys_addr, u32 virt_addr, u32 size, u32 tlb_word2_i_value) { region_t region_array; - region_array.base = start; + region_array.base = phys_addr; region_array.size = size; region_array.tlb_word2_i_value = tlb_word2_i_value; /* en-/disable cache */ /* Call the routine to add in the tlb entries for the memory regions */ - program_tlb_addr(region_array.base, region_array.size, + program_tlb_addr(region_array.base, virt_addr, region_array.size, region_array.tlb_word2_i_value); return; -- cgit v1.1 From 85f737376d5ff3d5f0d45a8b657686326d175307 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 15 Jun 2007 07:39:43 +0200 Subject: [ppc4xx] Extend 44x GPIO setup with default output state The board config array CFG_440_GPIO_TABLE for the ppc440 GPIO setup is extended with the default GPIO output state (level). Signed-off-by: Stefan Roese --- cpu/ppc4xx/gpio.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) (limited to 'cpu') diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index fb0f575..5235203 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -103,6 +103,18 @@ void gpio_write_bit(int pin, int val) out32(GPIO0_OR + offs, in32(GPIO0_OR + offs) & ~GPIO_VAL(pin)); } +int gpio_read_out_bit(int pin) +{ + u32 offs = 0; + + if (pin >= GPIO_MAX) { + offs = 0x100; + pin -= GPIO_MAX; + } + + return (in32(GPIO0_OR + offs) & GPIO_VAL(pin) ? 1 : 0); +} + #if defined(CFG_440_GPIO_TABLE) void gpio_set_chip_configuration(void) { @@ -157,11 +169,37 @@ void gpio_set_chip_configuration(void) switch (gpio_tab[gpio_core][i].alt_nb) { case GPIO_SEL: if (gpio_core == GPIO0) { + /* + * Setup output value + * 1 -> high level + * 0 -> low level + * else -> don't touch + */ + reg = in32(GPIO0_OR); + if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) + reg |= (0x80000000 >> (i)); + else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) + reg &= ~(0x80000000 >> (i)); + out32(GPIO0_OR, reg); + reg = in32(GPIO0_TCR) | (0x80000000 >> (i)); out32(GPIO0_TCR, reg); } if (gpio_core == GPIO1) { + /* + * Setup output value + * 1 -> high level + * 0 -> low level + * else -> don't touch + */ + reg = in32(GPIO0_OR); + if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_1) + reg |= (0x80000000 >> (i)); + else if (gpio_tab[gpio_core][i].out_val == GPIO_OUT_0) + reg &= ~(0x80000000 >> (i)); + out32(GPIO0_OR, reg); + reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } -- cgit v1.1 From efa35cf12d914d4caba942acd5a6c45f217de302 Mon Sep 17 00:00:00 2001 From: Grzegorz Bernacki Date: Fri, 15 Jun 2007 11:19:28 +0200 Subject: ppc4xx: Clean up 440 exceptions handling - Introduced dedicated switches for building 440 and 405 images required for 440-specific machine instructions like 'rfmci' etc. - Exception vectors moved to the proper location (_start moved away from the critical exception handler space, which it occupied) - CriticalInput now serviced (with default handler) - MachineCheck properly serviced (added a dedicated handler and return subroutine) - Overall cleanup of exceptions declared with STD_EXCEPTION macro (unused, unhandled and those not relevant for 4xx were eliminated) - Eliminated Linux leftovers, removed dead code Signed-off-by: Grzegorz Bernacki Signed-off-by: Rafal Jaworowski Signed-off-by: Stefan Roese --- cpu/ppc4xx/config.mk | 10 +- cpu/ppc4xx/start.S | 329 ++++++++++++++++++++++++++------------------------- cpu/ppc4xx/traps.c | 107 ++++++++++------- 3 files changed, 242 insertions(+), 204 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk index 119e061..e7fc3f63 100644 --- a/cpu/ppc4xx/config.mk +++ b/cpu/ppc4xx/config.mk @@ -22,5 +22,13 @@ # PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing +PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -msoft-float -PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -Wa,-m405 -mcpu=405 -msoft-float +cfg=$(shell grep configs $(TOPDIR)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +is440=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg)) + +ifneq (,$(findstring CONFIG_440,$(is440))) +PLATFORM_CPPFLAGS += -Wa,-m440 -mcpu=440 +else +PLATFORM_CPPFLAGS += -Wa,-m405 -mcpu=405 +endif diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 78d0042..e135220 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -294,11 +294,13 @@ skip_debug_init: mtspr ivor7,r1 /* Floating point unavailable */ li r1,0x0c00 mtspr ivor8,r1 /* System call */ - li r1,0x1000 - mtspr ivor10,r1 /* Decrementer (PIT for 440) */ - li r1,0x1400 - mtspr ivor13,r1 /* Data TLB error */ + li r1,0x0a00 + mtspr ivor9,r1 /* Auxiliary Processor unavailable */ + li r1,0x0900 + mtspr ivor10,r1 /* Decrementer */ li r1,0x1300 + mtspr ivor13,r1 /* Data TLB error */ + li r1,0x1400 mtspr ivor14,r1 /* Instr TLB error */ li r1,0x2000 mtspr ivor15,r1 /* Debug */ @@ -503,11 +505,81 @@ version_string: .ascii " (", __DATE__, " - ", __TIME__, ")" .ascii CONFIG_IDENT_STRING, "\0" -/* - * Maybe this should be moved somewhere else because the current - * location (0x100) is where the CriticalInput Execption should be. - */ . = EXC_OFF_SYS_RESET + .globl _start_of_vectors +_start_of_vectors: + +/* Critical input. */ + CRIT_EXCEPTION(0x100, CritcalInput, UnknownException) + +#ifdef CONFIG_440 +/* Machine check */ + MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException) +#else + CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) +#endif /* CONFIG_440 */ + +/* Data Storage exception. */ + STD_EXCEPTION(0x300, DataStorage, UnknownException) + +/* Instruction Storage exception. */ + STD_EXCEPTION(0x400, InstStorage, UnknownException) + +/* External Interrupt exception. */ + STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) + +/* Alignment exception. */ + . = 0x600 +Alignment: + EXCEPTION_PROLOG(SRR0, SRR1) + mfspr r4,DAR + stw r4,_DAR(r21) + mfspr r5,DSISR + stw r5,_DSISR(r21) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_Alignment: + .long AlignmentException - _start + _START_OFFSET + .long int_return - _start + _START_OFFSET + +/* Program check exception */ + . = 0x700 +ProgramCheck: + EXCEPTION_PROLOG(SRR0, SRR1) + addi r3,r1,STACK_FRAME_OVERHEAD + li r20,MSR_KERNEL + rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ + lwz r6,GOT(transfer_to_handler) + mtlr r6 + blrl +.L_ProgramCheck: + .long ProgramCheckException - _start + _START_OFFSET + .long int_return - _start + _START_OFFSET + +#ifdef CONFIG_440 + STD_EXCEPTION(0x800, FPUnavailable, UnknownException) + STD_EXCEPTION(0x900, Decrementer, DecrementerPITException) + STD_EXCEPTION(0xa00, APU, UnknownException) +#endif + STD_EXCEPTION(0xc00, SystemCall, UnknownException) + +#ifdef CONFIG_440 + STD_EXCEPTION(0x1300, DataTLBError, UnknownException) + STD_EXCEPTION(0x1400, InstructionTLBError, UnknownException) +#else + STD_EXCEPTION(0x1000, PIT, DecrementerPITException) + STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) + STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) +#endif + CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) + + .globl _end_of_vectors +_end_of_vectors: + . = _START_OFFSET #endif .globl _start _start: @@ -1017,107 +1089,6 @@ start_ram: #ifndef CONFIG_NAND_SPL -/*****************************************************************************/ - .globl _start_of_vectors -_start_of_vectors: - -#if 0 -/*TODO Fixup _start above so we can do this*/ -/* Critical input. */ - CRIT_EXCEPTION(0x100, CritcalInput, CritcalInputException) -#endif - -/* Machine check */ - CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - li r20,MSR_KERNEL - rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ - lwz r6,GOT(transfer_to_handler) - mtlr r6 - blrl -.L_Alignment: - .long AlignmentException - _start + EXC_OFF_SYS_RESET - .long int_return - _start + EXC_OFF_SYS_RESET - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG - addi r3,r1,STACK_FRAME_OVERHEAD - li r20,MSR_KERNEL - rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ - lwz r6,GOT(transfer_to_handler) - mtlr r6 - blrl -.L_ProgramCheck: - .long ProgramCheckException - _start + EXC_OFF_SYS_RESET - .long int_return - _start + EXC_OFF_SYS_RESET - - /* No FPU on MPC8xx. This exception is not supposed to happen. - */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - /* On the MPC8xx, this is a software emulation interrupt. It occurs - * for all unimplemented and illegal instructions. - */ - STD_EXCEPTION(0x1000, PIT, PITException) - - STD_EXCEPTION(0x1100, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataTLBMiss, UnknownException) - STD_EXCEPTION(0x1300, InstructionTLBError, UnknownException) - STD_EXCEPTION(0x1400, DataTLBError, UnknownException) - - STD_EXCEPTION(0x1500, Reserved5, UnknownException) - STD_EXCEPTION(0x1600, Reserved6, UnknownException) - STD_EXCEPTION(0x1700, Reserved7, UnknownException) - STD_EXCEPTION(0x1800, Reserved8, UnknownException) - STD_EXCEPTION(0x1900, Reserved9, UnknownException) - STD_EXCEPTION(0x1a00, ReservedA, UnknownException) - STD_EXCEPTION(0x1b00, ReservedB, UnknownException) - - STD_EXCEPTION(0x1c00, DataBreakpoint, UnknownException) - STD_EXCEPTION(0x1d00, InstructionBreakpoint, UnknownException) - STD_EXCEPTION(0x1e00, PeripheralBreakpoint, UnknownException) - STD_EXCEPTION(0x1f00, DevPortBreakpoint, UnknownException) - - CRIT_EXCEPTION(0x2000, DebugBreakpoint, DebugException ) - - .globl _end_of_vectors -_end_of_vectors: - - - . = 0x2100 - /* * This code finishes saving the registers to the exception frame * and jumps to the appropriate handler for the exception. @@ -1133,28 +1104,12 @@ transfer_to_handler: SAVE_4GPRS(8, r21) SAVE_8GPRS(12, r21) SAVE_8GPRS(24, r21) -#if 0 - andi. r23,r23,MSR_PR - mfspr r23,SPRG3 /* if from user, fix up tss.regs */ - beq 2f - addi r24,r1,STACK_FRAME_OVERHEAD - stw r24,PT_REGS(r23) -2: addi r2,r23,-TSS /* set r2 to current */ - tovirt(r2,r2,r23) -#endif mflr r23 andi. r24,r23,0x3f00 /* get vector offset */ stw r24,TRAP(r21) li r22,0 stw r22,RESULT(r21) mtspr SPRG2,r22 /* r1 is now kernel sp */ -#if 0 - addi r24,r2,TASK_STRUCT_SIZE /* check for kernel stack overflow */ - cmplw 0,r1,r2 - cmplw 1,r1,r24 - crand 1,1,4 - bgt stack_ovf /* if r2 < r1 < r2+TASK_STRUCT_SIZE */ -#endif lwz r24,0(r23) /* virtual address of handler */ lwz r23,4(r23) /* where to go when done */ mtspr SRR0,r24 @@ -1215,16 +1170,64 @@ crit_return: REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) - mtspr 990,r2 /* SRR2 */ - mtspr 991,r0 /* SRR3 */ + mtspr csrr0,r2 + mtspr csrr1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) SYNC rfci -/* Cache functions. -*/ +#ifdef CONFIG_440 +mck_return: + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr mcsrr0,r2 + mtspr mcsrr1,r0 + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfmci +#endif /* CONFIG_440 */ + + +/* + * Cache functions. + * + * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM, + * although for some cache-ralated calls stubs have to be provided to satisfy + * symbols resolution. + * + */ +#ifdef CONFIG_440 + .globl dcache_disable +dcache_disable: + blr + + .globl dcache_status +dcache_status: + blr +#else flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ ori r9,r9,0x8000 @@ -1303,24 +1306,13 @@ dcache_status: mfdccr r3 srwi r3, r3, 31 /* >>31 => select bit 0 */ blr +#endif .globl get_pvr get_pvr: mfspr r3, PVR blr -#if !defined(CONFIG_440) - .globl wr_pit -wr_pit: - mtspr pit, r3 - blr -#endif - - .globl wr_tcr -wr_tcr: - mtspr tcr, r3 - blr - /*------------------------------------------------------------------------------- */ /* Function: out16 */ /* Description: Output 16 bits */ @@ -1518,7 +1510,7 @@ relocate_code: * initialization, now running from RAM. */ - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET + addi r0, r10, in_ram - _start + _START_OFFSET mtlr r0 blr /* NEVER RETURNS! */ @@ -1588,7 +1580,7 @@ clear_bss: */ .globl trap_init trap_init: - lwz r7, GOT(_start) + lwz r7, GOT(_start_of_vectors) lwz r8, GOT(_end_of_vectors) li r9, 0x100 /* reset vector always at 0x100 */ @@ -1608,35 +1600,48 @@ trap_init: /* * relocate `hdlr' and `int_return' entries */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET + li r7, .L_MachineCheck - _start + _START_OFFSET + li r8, Alignment - _start + _START_OFFSET 2: bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ + addi r7, r7, 0x100 /* next exception vector */ cmplw 0, r7, r8 blt 2b - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET + li r7, .L_Alignment - _start + _START_OFFSET bl trap_reloc - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET + li r7, .L_ProgramCheck - _start + _START_OFFSET bl trap_reloc - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b +#ifdef CONFIG_440 + li r7, .L_FPUnavailable - _start + _START_OFFSET + bl trap_reloc - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b + li r7, .L_Decrementer - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_APU - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_InstructionTLBError - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_DataTLBError - _start + _START_OFFSET + bl trap_reloc +#else /* CONFIG_440 */ + li r7, .L_PIT - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_InstructionTLBMiss - _start + _START_OFFSET + bl trap_reloc + + li r7, .L_DataTLBMiss - _start + _START_OFFSET + bl trap_reloc +#endif /* CONFIG_440 */ + + li r7, .L_DebugBreakpoint - _start + _START_OFFSET + bl trap_reloc #if !defined(CONFIG_440) addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index 6aecca2..54659d3 100644 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -36,6 +36,8 @@ #include #include +DECLARE_GLOBAL_DATA_PTR; + #if (CONFIG_COMMANDS & CFG_CMD_KGDB) int (*debugger_exception_handler)(struct pt_regs *) = 0; #endif @@ -45,8 +47,7 @@ extern unsigned long search_exception_table(unsigned long); /* THIS NEEDS CHANGING to use the board info structure. */ -#define END_OF_MEM 0x00400000 - +#define END_OF_MEM (gd->bd->bi_memstart + gd->bd->bi_memsize) static __inline__ void set_tsr(unsigned long val) { @@ -88,29 +89,29 @@ extern void do_bedbug_breakpoint(struct pt_regs *); void print_backtrace(unsigned long *sp) { - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - printf("\n"); + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); } void show_regs(struct pt_regs * regs) { int i; - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", + printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DEAR: %08lX\n", regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, @@ -139,14 +140,14 @@ _exception(int signr, struct pt_regs *regs) { show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); + panic("Exception"); } void MachineCheckException(struct pt_regs *regs) { - unsigned long fixup; - + unsigned long fixup, val; + /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to * the PCI exception handler. @@ -161,26 +162,50 @@ MachineCheckException(struct pt_regs *regs) return; #endif - printf("Machine check in kernel mode.\n"); + printf("Machine Check Exception.\n"); printf("Caused by (from msr): "); - printf("regs %p ",regs); - switch( regs->msr & 0x000F0000) { - case (0x80000000>>12): - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000>>13): - printf("Transfer error ack signal\n"); - break; - case (0x80000000>>14): - printf("Data parity signal\n"); - break; - case (0x80000000>>15): - printf("Address parity signal\n"); - break; - default: - printf("Unknown values in msr\n"); + printf("regs %p ", regs); + + val = get_esr(); + +#if !defined(CONFIG_440) + if (val& ESR_IMCP) { + printf("Instruction"); + mtspr(ESR, val & ~ESR_IMCP); + } else + printf("Data"); + printf(" machine check.\n"); + +#elif defined(CONFIG_440) + if (val& ESR_IMCP){ + printf("Instruction Synchronous Machine Check exception\n"); + mtspr(SPRN_ESR, val & ~ESR_IMCP); } + else { + val = mfspr(MCSR); + if (val & MCSR_IB) + printf("Instruction Read PLB Error\n"); + if (val & MCSR_DRB) + printf("Data Read PLB Error\n"); + if (val & MCSR_DWB) + printf("Data Write PLB Error\n"); + if (val & MCSR_TLBP) + printf("TLB Parity Error\n"); + if (val & MCSR_ICP){ + /*flush_instruction_cache(); */ + printf("I-Cache Parity Error\n"); + } + if (val & MCSR_DCSP) + printf("D-Cache Search Parity Error\n"); + if (val & MCSR_DCFP) + printf("D-Cache Flush Parity Error\n"); + if (val & MCSR_IMPE) + printf("Machine Check exception is imprecise\n"); + + /* Clear MCSR */ + mtspr(SPRN_MCSR, val); + } +#endif show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("machine check"); @@ -224,7 +249,7 @@ ProgramCheckException(struct pt_regs *regs) } void -PITException(struct pt_regs *regs) +DecrementerPITException(struct pt_regs *regs) { /* * Reset PIT interrupt -- cgit v1.1 From df8a24cdd30151505cf57bbee5289e91bf53bd1b Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 19 Jun 2007 16:42:31 +0200 Subject: [ppc4xx] Fix problem with NAND booting on AMCC Acadia The latest changes showed a problem with the location of the NAND-SPL image in the OCM and the init-data area (incl. cache). This patch fixes this problem. Signed-off-by: Stefan Roese --- cpu/ppc4xx/start.S | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index e135220..16df1e7 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -564,7 +564,7 @@ ProgramCheck: STD_EXCEPTION(0x800, FPUnavailable, UnknownException) STD_EXCEPTION(0x900, Decrementer, DecrementerPITException) STD_EXCEPTION(0xa00, APU, UnknownException) -#endif +#endif STD_EXCEPTION(0xc00, SystemCall, UnknownException) #ifdef CONFIG_440 @@ -889,7 +889,7 @@ _start: */ lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l - ori r3,r3,0x8270 /* 32K Offset, 16K for Bank 1, R/W/Enable */ + ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ mtdcr ocmplb3cr1,r3 /* Set PLB Access */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ mtdcr ocmplb3cr2,r3 /* Set PLB Access */ @@ -1623,7 +1623,7 @@ trap_init: li r7, .L_APU - _start + _START_OFFSET bl trap_reloc - + li r7, .L_InstructionTLBError - _start + _START_OFFSET bl trap_reloc -- cgit v1.1 From 83b4cfa3d629dff0264366263c5e94d9a50ad80b Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Wed, 20 Jun 2007 18:14:24 +0200 Subject: Coding style cleanup. Refresh CHANGELOG. --- cpu/ppc4xx/start.S | 207 +++++++++++++++++++++++++++-------------------------- cpu/ppc4xx/traps.c | 68 +++++++++--------- 2 files changed, 137 insertions(+), 138 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 16df1e7..a46197d 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -22,26 +22,27 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */ -/*------------------------------------------------------------------------------+ */ -/* */ -/* This source code has been made available to you by IBM on an AS-IS */ -/* basis. Anyone receiving this source is licensed under IBM */ -/* copyrights to use it in any way he or she deems fit, including */ -/* copying it, modifying it, compiling it, and redistributing it either */ -/* with or without modifications. No license under IBM patents or */ -/* patent applications is to be implied by the copyright license. */ -/* */ -/* Any user of this software should understand that IBM cannot provide */ -/* technical support for this software and will not be responsible for */ -/* any consequences resulting from the use of this software. */ -/* */ -/* Any person who transfers this source code or any derivative work */ -/* must include the IBM copyright notice, this paragraph, and the */ -/* preceding two paragraphs in the transferred software. */ -/* */ -/* COPYRIGHT I B M CORPORATION 1995 */ -/* LICENSED MATERIAL - PROGRAM PROPERTY OF I B M */ -/*------------------------------------------------------------------------------- */ +/*------------------------------------------------------------------------------+ + * + * This source code has been made available to you by IBM on an AS-IS + * basis. Anyone receiving this source is licensed under IBM + * copyrights to use it in any way he or she deems fit, including + * copying it, modifying it, compiling it, and redistributing it either + * with or without modifications. No license under IBM patents or + * patent applications is to be implied by the copyright license. + * + * Any user of this software should understand that IBM cannot provide + * technical support for this software and will not be responsible for + * any consequences resulting from the use of this software. + * + * Any person who transfers this source code or any derivative work + * must include the IBM copyright notice, this paragraph, and the + * preceding two paragraphs in the transferred software. + * + * COPYRIGHT I B M CORPORATION 1995 + * LICENSED MATERIAL - PROGRAM PROPERTY OF I B M + *------------------------------------------------------------------------------- + */ /* U-Boot - Startup Code for AMCC 4xx PowerPC based Embedded Boards * @@ -110,11 +111,11 @@ # endif #endif /* CFG_INIT_DCACHE_CS */ -#define function_prolog(func_name) .text; \ +#define function_prolog(func_name) .text; \ .align 2; \ .globl func_name; \ func_name: -#define function_epilog(func_name) .type func_name,@function; \ +#define function_epilog(func_name) .type func_name,@function; \ .size func_name,.-func_name /* We don't want the MMU yet. @@ -295,7 +296,7 @@ skip_debug_init: li r1,0x0c00 mtspr ivor8,r1 /* System call */ li r1,0x0a00 - mtspr ivor9,r1 /* Auxiliary Processor unavailable */ + mtspr ivor9,r1 /* Auxiliary Processor unavailable */ li r1,0x0900 mtspr ivor10,r1 /* Decrementer */ li r1,0x1300 @@ -514,9 +515,9 @@ _start_of_vectors: #ifdef CONFIG_440 /* Machine check */ - MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException) + MCK_EXCEPTION(0x200, MachineCheck, MachineCheckException) #else - CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) + CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException) #endif /* CONFIG_440 */ /* Data Storage exception. */ @@ -895,15 +896,15 @@ _start: mtdcr ocmplb3cr2,r3 /* Set PLB Access */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l - ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ - mtdcr ocmdscr1, r3 /* Set Data Side */ - mtdcr ocmiscr1, r3 /* Set Instruction Side */ + ori r3,r3,0x0270 /* 16K for Bank 1, R/W/Enable */ + mtdcr ocmdscr1, r3 /* Set Data Side */ + mtdcr ocmiscr1, r3 /* Set Instruction Side */ ori r3,r3,0x4000 /* Add 0x4000 for bank 2 */ - mtdcr ocmdscr2, r3 /* Set Data Side */ - mtdcr ocmiscr2, r3 /* Set Instruction Side */ - addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ + mtdcr ocmdscr2, r3 /* Set Data Side */ + mtdcr ocmiscr2, r3 /* Set Instruction Side */ + addis r3,0,0x0800 /* OCM Data Parity Disable - 1 Wait State */ mtdcr ocmdsisdpc,r3 isync @@ -922,7 +923,7 @@ _start: mtdcr ocmdscntl, r4 /* set data-side IRAM config */ isync - lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ + lis r3,CFG_OCM_DATA_ADDR@h /* OCM location */ ori r3,r3,CFG_OCM_DATA_ADDR@l mtdcr ocmdsarc, r3 addis r4, 0, 0xC000 /* OCM data area enabled */ @@ -1170,8 +1171,8 @@ crit_return: REST_GPR(31, r1) lwz r2,_NIP(r1) /* Restore environment */ lwz r0,_MSR(r1) - mtspr csrr0,r2 - mtspr csrr1,r0 + mtspr csrr0,r2 + mtspr csrr1,r0 lwz r0,GPR0(r1) lwz r2,GPR2(r1) lwz r1,GPR1(r1) @@ -1180,34 +1181,34 @@ crit_return: #ifdef CONFIG_440 mck_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr mcsrr0,r2 - mtspr mcsrr1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfmci + mfmsr r28 /* Disable interrupts */ + li r4,0 + ori r4,r4,MSR_EE + andc r28,r28,r4 + SYNC /* Some chip revs need this... */ + mtmsr r28 + SYNC + lwz r2,_CTR(r1) + lwz r0,_LINK(r1) + mtctr r2 + mtlr r0 + lwz r2,_XER(r1) + lwz r0,_CCR(r1) + mtspr XER,r2 + mtcrf 0xFF,r0 + REST_10GPRS(3, r1) + REST_10GPRS(13, r1) + REST_8GPRS(23, r1) + REST_GPR(31, r1) + lwz r2,_NIP(r1) /* Restore environment */ + lwz r0,_MSR(r1) + mtspr mcsrr0,r2 + mtspr mcsrr1,r0 + lwz r0,GPR0(r1) + lwz r2,GPR2(r1) + lwz r1,GPR1(r1) + SYNC + rfmci #endif /* CONFIG_440 */ @@ -1222,11 +1223,11 @@ mck_return: #ifdef CONFIG_440 .globl dcache_disable dcache_disable: - blr + blr - .globl dcache_status + .globl dcache_status dcache_status: - blr + blr #else flush_dcache: addis r9,r0,0x0002 /* set mask for EE and CE msr bits */ @@ -1616,32 +1617,32 @@ trap_init: #ifdef CONFIG_440 li r7, .L_FPUnavailable - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc li r7, .L_Decrementer - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc li r7, .L_APU - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc - li r7, .L_InstructionTLBError - _start + _START_OFFSET - bl trap_reloc + li r7, .L_InstructionTLBError - _start + _START_OFFSET + bl trap_reloc - li r7, .L_DataTLBError - _start + _START_OFFSET - bl trap_reloc + li r7, .L_DataTLBError - _start + _START_OFFSET + bl trap_reloc #else /* CONFIG_440 */ li r7, .L_PIT - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc li r7, .L_InstructionTLBMiss - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc li r7, .L_DataTLBMiss - _start + _START_OFFSET - bl trap_reloc + bl trap_reloc #endif /* CONFIG_440 */ - li r7, .L_DebugBreakpoint - _start + _START_OFFSET - bl trap_reloc + li r7, .L_DebugBreakpoint - _start + _START_OFFSET + bl trap_reloc #if !defined(CONFIG_440) addi r7,r0,0x1000 /* set ME bit (Machine Exceptions) */ @@ -1684,13 +1685,13 @@ trap_reloc: +----------------------------------------------------------------------------*/ function_prolog(dcbz_area) rlwinm. r5,r4,0,27,31 - rlwinm r5,r4,27,5,31 - beq ..d_ra2 - addi r5,r5,0x0001 -..d_ra2:mtctr r5 -..d_ag2:dcbz r0,r3 - addi r3,r3,32 - bdnz ..d_ag2 + rlwinm r5,r4,27,5,31 + beq ..d_ra2 + addi r5,r5,0x0001 +..d_ra2:mtctr r5 +..d_ag2:dcbz r0,r3 + addi r3,r3,32 + bdnz ..d_ag2 sync blr function_epilog(dcbz_area) @@ -1699,26 +1700,26 @@ trap_reloc: | dflush. Assume 32K at vector address is cachable. +----------------------------------------------------------------------------*/ function_prolog(dflush) - mfmsr r9 - rlwinm r8,r9,0,15,13 - rlwinm r8,r8,0,17,15 - mtmsr r8 - addi r3,r0,0x0000 - mtspr dvlim,r3 - mfspr r3,ivpr - addi r4,r0,1024 - mtctr r4 + mfmsr r9 + rlwinm r8,r9,0,15,13 + rlwinm r8,r8,0,17,15 + mtmsr r8 + addi r3,r0,0x0000 + mtspr dvlim,r3 + mfspr r3,ivpr + addi r4,r0,1024 + mtctr r4 ..dflush_loop: - lwz r6,0x0(r3) - addi r3,r3,32 - bdnz ..dflush_loop - addi r3,r3,-32 - mtctr r4 -..ag: dcbf r0,r3 - addi r3,r3,-32 - bdnz ..ag + lwz r6,0x0(r3) + addi r3,r3,32 + bdnz ..dflush_loop + addi r3,r3,-32 + mtctr r4 +..ag: dcbf r0,r3 + addi r3,r3,-32 + bdnz ..ag sync - mtmsr r9 + mtmsr r9 blr function_epilog(dflush) #endif /* CONFIG_440 */ diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c index 54659d3..7c44a29 100644 --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -89,22 +89,22 @@ extern void do_bedbug_breakpoint(struct pt_regs *); void print_backtrace(unsigned long *sp) { - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - printf("\n"); + int cnt = 0; + unsigned long i; + + printf("Call backtrace: "); + while (sp) { + if ((uint)sp > END_OF_MEM) + break; + + i = sp[1]; + if (cnt++ % 7 == 0) + printf("\n"); + printf("%08lX ", i); + if (cnt > 32) break; + sp = (unsigned long *)*sp; + } + printf("\n"); } void show_regs(struct pt_regs * regs) @@ -121,14 +121,12 @@ void show_regs(struct pt_regs * regs) printf("\n"); for (i = 0; i < 32; i++) { - if ((i % 8) == 0) - { + if ((i % 8) == 0) { printf("GPR%02d: ", i); } printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) - { + if ((i % 8) == 7) { printf("\n"); } } @@ -147,7 +145,7 @@ void MachineCheckException(struct pt_regs *regs) { unsigned long fixup, val; - + /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to * the PCI exception handler. @@ -172,16 +170,16 @@ MachineCheckException(struct pt_regs *regs) if (val& ESR_IMCP) { printf("Instruction"); mtspr(ESR, val & ~ESR_IMCP); - } else + } else { printf("Data"); + } printf(" machine check.\n"); #elif defined(CONFIG_440) if (val& ESR_IMCP){ printf("Instruction Synchronous Machine Check exception\n"); mtspr(SPRN_ESR, val & ~ESR_IMCP); - } - else { + } else { val = mfspr(MCSR); if (val & MCSR_IB) printf("Instruction Read PLB Error\n"); @@ -297,17 +295,17 @@ addr_probe(uint *addr) __asm__ __volatile__( \ "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,\"ax\"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,\"a\"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); + " eieio\n" \ + " li %0,0\n" \ + "2:\n" \ + ".section .fixup,\"ax\"\n" \ + "3: li %0,-1\n" \ + " b 2b\n" \ + ".section __ex_table,\"a\"\n" \ + " .align 2\n" \ + " .long 1b,3b\n" \ + ".text" \ + : "=r" (retval) : "r"(addr)); return (retval); #endif -- cgit v1.1 From 02032e8f14751a1a751b09240a4f1cf9f8a2077f Mon Sep 17 00:00:00 2001 From: Rafal Jaworowski Date: Fri, 22 Jun 2007 14:58:04 +0200 Subject: [ppc] Fix build breakage for all non-4xx PowerPC variants. - adapt to the more generic EXCEPTION_PROLOG and CRIT_EXCEPTION macros - minor 4xx cleanup --- cpu/74xx_7xx/start.S | 4 ++-- cpu/mpc5xx/start.S | 4 ++-- cpu/mpc5xxx/start.S | 4 ++-- cpu/mpc8220/start.S | 4 ++-- cpu/mpc824x/start.S | 4 ++-- cpu/mpc8260/start.S | 4 ++-- cpu/mpc83xx/start.S | 4 ++-- cpu/mpc85xx/start.S | 4 ++-- cpu/mpc86xx/start.S | 4 ++-- cpu/mpc8xx/start.S | 4 ++-- cpu/ppc4xx/start.S | 1 - 11 files changed, 20 insertions(+), 21 deletions(-) (limited to 'cpu') diff --git a/cpu/74xx_7xx/start.S b/cpu/74xx_7xx/start.S index 1143038..b5834b9 100644 --- a/cpu/74xx_7xx/start.S +++ b/cpu/74xx_7xx/start.S @@ -125,7 +125,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -143,7 +143,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S index 087435e..9572837 100644 --- a/cpu/mpc5xx/start.S +++ b/cpu/mpc5xx/start.S @@ -210,7 +210,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -228,7 +228,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S index 3936b55..9b1bd48 100644 --- a/cpu/mpc5xxx/start.S +++ b/cpu/mpc5xxx/start.S @@ -208,7 +208,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -227,7 +227,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8220/start.S b/cpu/mpc8220/start.S index 5233202..b5145ca 100644 --- a/cpu/mpc8220/start.S +++ b/cpu/mpc8220/start.S @@ -169,7 +169,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -188,7 +188,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc824x/start.S b/cpu/mpc824x/start.S index 9ff052c..784edc3 100644 --- a/cpu/mpc824x/start.S +++ b/cpu/mpc824x/start.S @@ -220,7 +220,7 @@ _start_of_vectors: /* Alignment exception. */ . = EXC_OFF_ALIGN Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -238,7 +238,7 @@ Alignment: /* Program check exception */ . = EXC_OFF_PROGRAM ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index 2e93bbb..bc55b58 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -279,7 +279,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -298,7 +298,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc83xx/start.S b/cpu/mpc83xx/start.S index 6ee9ec9..496c8a5 100644 --- a/cpu/mpc83xx/start.S +++ b/cpu/mpc83xx/start.S @@ -263,7 +263,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -282,7 +282,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc85xx/start.S b/cpu/mpc85xx/start.S index 20c7ebc..77c155c 100644 --- a/cpu/mpc85xx/start.S +++ b/cpu/mpc85xx/start.S @@ -457,7 +457,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x0600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -475,7 +475,7 @@ Alignment: /* Program check exception */ . = 0x0700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc86xx/start.S b/cpu/mpc86xx/start.S index 67c56db..412745b 100644 --- a/cpu/mpc86xx/start.S +++ b/cpu/mpc86xx/start.S @@ -116,7 +116,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -134,7 +134,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/mpc8xx/start.S b/cpu/mpc8xx/start.S index 33a3f6c..eca4b50 100644 --- a/cpu/mpc8xx/start.S +++ b/cpu/mpc8xx/start.S @@ -224,7 +224,7 @@ _start_of_vectors: /* Alignment exception. */ . = 0x600 Alignment: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) mfspr r4,DAR stw r4,_DAR(r21) mfspr r5,DSISR @@ -242,7 +242,7 @@ Alignment: /* Program check exception */ . = 0x700 ProgramCheck: - EXCEPTION_PROLOG + EXCEPTION_PROLOG(SRR0, SRR1) addi r3,r1,STACK_FRAME_OVERHEAD li r20,MSR_KERNEL rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */ diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index a46197d..dfe813c 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -60,7 +60,6 @@ * address and (s)dram will be positioned at address 0 */ #include -#include #include #include -- cgit v1.1 From 3a1f5c81b0b9557817a789bece839905581c2205 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 22 Jun 2007 16:58:40 +0200 Subject: ppc4xx: Fix problem with extended program_tlb() funtion The recently extended program_tlb() function had a problem when multiple TLB's had to be setup (for example with 512MB of SDRAM). The virtual address was not incremented. This patch fixes this issue and is tested on Katmai with 512MB SDRAM. Signed-off-by: Stefan Roese --- cpu/ppc4xx/tlb.c | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'cpu') diff --git a/cpu/ppc4xx/tlb.c b/cpu/ppc4xx/tlb.c index 6c916ef..049a785 100644 --- a/cpu/ppc4xx/tlb.c +++ b/cpu/ppc4xx/tlb.c @@ -101,6 +101,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_256MB, tlb_i)) == 0) { mem_size -= TLB_256MB_SIZE; phys_addr += TLB_256MB_SIZE; + virt_addr += TLB_256MB_SIZE; } } else if (((phys_addr & TLB_16MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16MB_SIZE)) { @@ -109,6 +110,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_16MB, tlb_i)) == 0) { mem_size -= TLB_16MB_SIZE; phys_addr += TLB_16MB_SIZE; + virt_addr += TLB_16MB_SIZE; } } else if (((phys_addr & TLB_1MB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1MB_SIZE)) { @@ -117,6 +119,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_1MB, tlb_i)) == 0) { mem_size -= TLB_1MB_SIZE; phys_addr += TLB_1MB_SIZE; + virt_addr += TLB_1MB_SIZE; } } else if (((phys_addr & TLB_256KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_256KB_SIZE)) { @@ -125,6 +128,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_256KB, tlb_i)) == 0) { mem_size -= TLB_256KB_SIZE; phys_addr += TLB_256KB_SIZE; + virt_addr += TLB_256KB_SIZE; } } else if (((phys_addr & TLB_64KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_64KB_SIZE)) { @@ -133,6 +137,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_64KB, tlb_i)) == 0) { mem_size -= TLB_64KB_SIZE; phys_addr += TLB_64KB_SIZE; + virt_addr += TLB_64KB_SIZE; } } else if (((phys_addr & TLB_16KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_16KB_SIZE)) { @@ -141,6 +146,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_16KB, tlb_i)) == 0) { mem_size -= TLB_16KB_SIZE; phys_addr += TLB_16KB_SIZE; + virt_addr += TLB_16KB_SIZE; } } else if (((phys_addr & TLB_4KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_4KB_SIZE)) { @@ -149,6 +155,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_4KB, tlb_i)) == 0) { mem_size -= TLB_4KB_SIZE; phys_addr += TLB_4KB_SIZE; + virt_addr += TLB_4KB_SIZE; } } else if (((phys_addr & TLB_1KB_ALIGN_MASK) == phys_addr) && (mem_size >= TLB_1KB_SIZE)) { @@ -157,6 +164,7 @@ static void program_tlb_addr(unsigned long phys_addr, TLB_WORD0_SIZE_1KB, tlb_i)) == 0) { mem_size -= TLB_1KB_SIZE; phys_addr += TLB_1KB_SIZE; + virt_addr += TLB_1KB_SIZE; } } else { printf("ERROR: no TLB size exists for the base address 0x%0X.\n", -- cgit v1.1 From 566a494f592ae3b3c0785d90d4e1ba45574880c4 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Fri, 22 Jun 2007 19:11:54 +0200 Subject: [PCS440EP] upgrade the PCS440EP board: - Show on the Status LEDs, some States of the board. - Get the MAC addresses from the EEProm - use PREBOOT - use the CF on the board. - check the U-Boot image in the Flash with a SHA1 checksum. - use dynamic TLB entries generation for the SDRAM Signed-off-by: Heiko Schocher --- cpu/ppc4xx/44x_spd_ddr.c | 26 +++++++++++------ cpu/ppc4xx/44x_spd_ddr2.c | 71 ++++++++++++++++++++++++++--------------------- 2 files changed, 56 insertions(+), 41 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index c500d3f..8621aa0 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -70,6 +70,13 @@ #define ONE_BILLION 1000000000 +#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) +extern void spd_ddr_init_hang (void); +#define HANG() spd_ddr_init_hang() +#else +#define HANG() hang() +#endif + /*----------------------------------------------------------------------------- | Memory Controller Options 0 +-----------------------------------------------------------------------------*/ @@ -467,7 +474,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + HANG(); } } @@ -490,7 +497,7 @@ static void check_mem_type(unsigned long *dimm_populated, dimm_num); printf("Only DDR SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } } @@ -510,7 +517,7 @@ static void check_volt_type(unsigned long *dimm_populated, if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", dimm_num); - hang(); + HANG(); } else { debug("DIMM %lu voltage level supported.\n", dimm_num); } @@ -581,7 +588,7 @@ static void program_cfg0(unsigned long *dimm_populated, printf("WARNING: DIMM with datawidth of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit datawidths supported.\n"); - hang(); + HANG(); } break; } @@ -769,7 +776,7 @@ static void program_tr0(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n", dimm_num); - hang(); + HANG(); } cycle_time_ns_x_10[cas_index] = @@ -849,7 +856,7 @@ static void program_tr0(unsigned long *dimm_populated, printf("ERROR: No supported CAS latency with the installed DIMMs.\n"); printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range.\n"); - hang(); + HANG(); } /* @@ -1008,6 +1015,7 @@ static int short_mem_test(void) */ for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { +//printf("bank enabled base:%x\n", &membase[j]); membase[j] = test[i][j]; ppcDcbf((unsigned long)&(membase[j])); } @@ -1160,7 +1168,7 @@ static void program_tr1(void) */ if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay.\n"); - hang(); + HANG(); } /* @@ -1310,7 +1318,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", bank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } switch (num_col_addr) { @@ -1332,7 +1340,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } /* diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 48b9ee2..d748dae 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -129,6 +129,13 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif +#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) +extern void spd_ddr_init_hang (void); +#define HANG() spd_ddr_init_hang() +#else +#define HANG() hang() +#endif + /* Private Structure Definitions */ /* enum only to ease code for cas latency setting */ @@ -582,7 +589,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - hang(); + HANG(); } } @@ -629,42 +636,42 @@ static void check_mem_type(unsigned long *dimm_populated, "slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 2: printf("ERROR: EDO DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 3: printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 4: printf("ERROR: SDRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 5: printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 6: printf("ERROR: SGRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; case 7: debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); @@ -679,7 +686,7 @@ static void check_mem_type(unsigned long *dimm_populated, (unsigned int)dimm_num); printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } } @@ -689,7 +696,7 @@ static void check_mem_type(unsigned long *dimm_populated, && (dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - hang(); + HANG(); } } } @@ -764,7 +771,7 @@ static void check_frequency(unsigned long *dimm_populated, (unsigned int)(calc_cycle_time*10)); printf("Replace the DIMM, or change DDR frequency via " "strapping bits.\n\n"); - hang(); + HANG(); } } } @@ -796,7 +803,7 @@ static void check_rank_number(unsigned long *dimm_populated, "slot %d is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } else total_rank += dimm_rank; } @@ -805,7 +812,7 @@ static void check_rank_number(unsigned long *dimm_populated, "for all slots.\n", (unsigned int)total_rank); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Remove one of the DIMM modules.\n\n"); - hang(); + HANG(); } } } @@ -830,28 +837,28 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("This DIMM is 5.0 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x01: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is LVTTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x02: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 1.5 Volt.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x03: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 3.3 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; case 0x04: /* 2.5 Voltage only for DDR1 */ @@ -863,7 +870,7 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - hang(); + HANG(); break; } } @@ -1006,13 +1013,13 @@ static void program_copt1(unsigned long *dimm_populated, if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { if (buf0 != buf1) { printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - hang(); + HANG(); } } if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - hang(); + HANG(); } else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; @@ -1020,7 +1027,7 @@ static void program_copt1(unsigned long *dimm_populated, mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - hang(); + HANG(); } if (ecc_enabled == TRUE) @@ -1209,7 +1216,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: ucode error on selected_cas value %d", selected_cas); - hang(); + HANG(); break; } @@ -1241,7 +1248,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: write recovery not support (%d)", write_recovery); - hang(); + HANG(); break; } #else @@ -1259,7 +1266,7 @@ static void program_initplr(unsigned long *dimm_populated, ods = ODS_REDUCED; } else { printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - hang(); + HANG(); } mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; @@ -1284,7 +1291,7 @@ static void program_initplr(unsigned long *dimm_populated, mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); - hang(); + HANG(); } } @@ -1389,7 +1396,7 @@ static void program_mode(unsigned long *dimm_populated, } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); - hang(); + HANG(); } } else { /* Convert from hex to decimal */ @@ -1526,7 +1533,7 @@ static void program_mode(unsigned long *dimm_populated, printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - hang(); + HANG(); } } else { /* DDR2 */ debug("cas_3_0_available=%d\n", cas_3_0_available); @@ -1549,7 +1556,7 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available, cas_4_0_available, cas_5_0_available); printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - hang(); + HANG(); } } @@ -1658,7 +1665,7 @@ static void program_rtr(unsigned long *dimm_populated, printf("ERROR: DIMM %d unsupported refresh rate/type.\n", (unsigned int)dimm_num); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); break; } @@ -2066,7 +2073,7 @@ static void program_bxcf(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", (unsigned int)num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } } @@ -2148,7 +2155,7 @@ static void program_memory_queue(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", (unsigned int)rank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - hang(); + HANG(); } if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) @@ -2693,7 +2700,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - hang(); + HANG(); } blank_string(strlen(str)); @@ -2849,7 +2856,7 @@ static void test(void) if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); - hang(); + HANG(); } /*------------------------------------------------------------------ -- cgit v1.1 From a11e06965ec91270c51853407ff1261d3c740386 Mon Sep 17 00:00:00 2001 From: Igor Lisitsin Date: Wed, 28 Mar 2007 19:06:19 +0400 Subject: Extend POST support for PPC440 Added memory, CPU, UART, I2C and SPR POST tests for PPC440. Signed-off-by: Igor Lisitsin -- --- cpu/ppc4xx/cpu_init.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'cpu') diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index 66e8637..bc1ae0e 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -211,6 +211,8 @@ cpu_init_f (void) val = mfspr(tcr); #if defined(CONFIG_440EP) || defined(CONFIG_440GR) val |= 0xb8000000; /* generate system reset after 1.34 seconds */ +#elif defined(CONFIG_440EPX) + val |= 0xb0000000; /* generate system reset after 1.34 seconds */ #else val |= 0xf0000000; /* generate system reset after 2.684 seconds */ #endif -- cgit v1.1 From 1636d1c8529c006d106287cfbc20cd0a246fe1cb Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Fri, 22 Jun 2007 23:59:00 +0200 Subject: Coding stylke cleanup; rebuild CHANGELOG --- cpu/mpc5xx/start.S | 2 +- cpu/mpc8260/start.S | 4 ++-- cpu/ppc4xx/44x_spd_ddr.c | 4 ++-- cpu/ppc4xx/44x_spd_ddr2.c | 4 ++-- cpu/ppc4xx/cpu_init.c | 2 +- 5 files changed, 8 insertions(+), 8 deletions(-) (limited to 'cpu') diff --git a/cpu/mpc5xx/start.S b/cpu/mpc5xx/start.S index 9572837..0637003 100644 --- a/cpu/mpc5xx/start.S +++ b/cpu/mpc5xx/start.S @@ -155,7 +155,7 @@ in_flash: /* Initialize some SPRs that are hard to access from C */ /*----------------------------------------------------------------------*/ - lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ + lis r3, CFG_IMMR@h /* Pass IMMR as arg1 to C routine */ lis r2, CFG_INIT_SP_ADDR@h ori r1, r2, CFG_INIT_SP_ADDR@l /* Set up the stack in internal SRAM */ /* Note: R0 is still 0 here */ diff --git a/cpu/mpc8260/start.S b/cpu/mpc8260/start.S index bc55b58..7f5dc81 100644 --- a/cpu/mpc8260/start.S +++ b/cpu/mpc8260/start.S @@ -676,13 +676,13 @@ init_debug: bdnz 1b /* Load the Instruction Address Breakpoint Register (IABR). */ - /* */ + /* */ /* The address to load is stored in the first word of dual port */ /* ram and should be preserved while the power is on, so you */ /* can plug addresses into that location then reset the cpu and */ /* this code will load that address into the IABR after the */ /* reset. */ - /* */ + /* */ /* When the program counter matches the contents of the IABR, */ /* an exception is generated (before the instruction at that */ /* location completes). The vector for this exception is 0x1300 */ diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index fe7bbab..e24cd81 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -1340,14 +1340,14 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, */ cr |= SDRAM_BXCR_SDBE; - for (i = 0; i < num_banks; i++) { + for (i = 0; i < num_banks; i++) { bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes = (4 << 20) * bank_size_id; bank_parms[ctrl_bank_num[dimm_num]+i].cr = cr; debug("DIMM%d-bank %d (SDRAM0_B%dCR): bank_size_bytes=%d\n", dimm_num, i, ctrl_bank_num[dimm_num]+i, bank_parms[ctrl_bank_num[dimm_num]+i].bank_size_bytes); - } + } } } diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index 874cec0..b5c0f53 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -58,8 +58,8 @@ #define SDRAM_DDR2 2 #define SDRAM_NONE 0 -#define MAXDIMMS 2 -#define MAXRANKS 4 +#define MAXDIMMS 2 +#define MAXRANKS 4 #define MAXBXCF 4 #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index bc1ae0e..351da36 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -153,7 +153,7 @@ cpu_init_f (void) */ asm volatile(" bl 0f" ::: "lr"); asm volatile("0: mflr 3" ::: "r3"); - asm volatile(" addi 4, 0, 14" ::: "r4"); + asm volatile(" addi 4, 0, 14" ::: "r4"); asm volatile(" mtctr 4" ::: "ctr"); asm volatile("1: icbt 0, 3"); asm volatile(" addi 3, 3, 32" ::: "r3"); -- cgit v1.1 From 5a1c9ff0c44305b57cb4d8f9369bba90bcf0e1f8 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Sun, 24 Jun 2007 17:23:41 +0200 Subject: ppc4xx: Add pci_pre_init() for 405 boards This patch adds support for calling a plattform dependant pci_pre_init() function for 405 boards. This can be used to move the current pci_405gp_fixup_irq() function into the board code. This patch also makes the CFG_PCI_PRE_INIT define obsolete. A default function with 'weak' attribute is used when a board specific pci_pre_init() is not implemented. Signed-off-by: Matthias Fuchs --- cpu/ppc4xx/405gp_pci.c | 30 ++++++++++++++++++++++-------- 1 file changed, 22 insertions(+), 8 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/405gp_pci.c b/cpu/ppc4xx/405gp_pci.c index 8bf03e1..2837929 100644 --- a/cpu/ppc4xx/405gp_pci.c +++ b/cpu/ppc4xx/405gp_pci.c @@ -77,11 +77,21 @@ #include #include +#ifdef CONFIG_PCI + DECLARE_GLOBAL_DATA_PTR; -#if defined(CONFIG_405GP) || defined(CONFIG_405EP) +/* + * Board-specific pci initialization + * Platform code can reimplement pci_pre_init() if needed + */ +int __pci_pre_init(struct pci_controller *hose) +{ + return 1; +} +int pci_pre_init(struct pci_controller *hose) __attribute__((weak, alias("__pci_pre_init"))); -#ifdef CONFIG_PCI +#if defined(CONFIG_405GP) || defined(CONFIG_405EP) #if defined(CONFIG_PMC405) ushort pmc405_pci_subsys_deviceid(void); @@ -191,6 +201,13 @@ void pci_405gp_init(struct pci_controller *hose) if (hose->pci_fb) pciauto_region_init(hose->pci_fb); + /* Let board change/modify hose & do initial checks */ + if (pci_pre_init (hose) == 0) { + printf("PCI: Board-specific initialization failed.\n"); + printf("PCI: Configuration aborted.\n"); + return; + } + pci_register_hose(hose); /*--------------------------------------------------------------------------+ @@ -416,14 +433,12 @@ void pci_init_board(void) #endif -#endif /* CONFIG_PCI */ - #endif /* CONFIG_405GP */ /*-----------------------------------------------------------------------------+ * CONFIG_440 *-----------------------------------------------------------------------------*/ -#if defined(CONFIG_440) && defined(CONFIG_PCI) +#if defined(CONFIG_440) static struct pci_controller ppc440_hose = {0}; @@ -496,14 +511,12 @@ void pci_440_init (struct pci_controller *hose) pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA); -#if defined(CFG_PCI_PRE_INIT) /* Let board change/modify hose & do initial checks */ if (pci_pre_init (hose) == 0) { printf("PCI: Board-specific initialization failed.\n"); printf("PCI: Configuration aborted.\n"); return; } -#endif pci_register_hose( hose ); @@ -575,4 +588,5 @@ void pci_init_board(void) #endif } -#endif /* CONFIG_440 & CONFIG_PCI */ +#endif /* CONFIG_440 */ +#endif /* CONFIG_PCI */ -- cgit v1.1 From 807018fb7faceb429ce0cb47baa2073746b33a4e Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Mon, 25 Jun 2007 16:50:55 +0200 Subject: ppc4xx: Fix O=buildir builds This patch fixes the problem to assemble cpu/ppc4xx/start.S experienced last week where building failed having specified O=../build.sequoia. Signed-off-by: Niklaus Giger --- cpu/ppc4xx/config.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/config.mk b/cpu/ppc4xx/config.mk index e7fc3f63..4fd5108 100644 --- a/cpu/ppc4xx/config.mk +++ b/cpu/ppc4xx/config.mk @@ -24,7 +24,7 @@ PLATFORM_RELFLAGS += -fPIC -ffixed-r14 -meabi -fno-strict-aliasing PLATFORM_CPPFLAGS += -DCONFIG_4xx -ffixed-r2 -ffixed-r29 -mstring -msoft-float -cfg=$(shell grep configs $(TOPDIR)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') +cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/') is440=$(shell grep CONFIG_440 $(TOPDIR)/include/$(cfg)) ifneq (,$(findstring CONFIG_440,$(is440))) -- cgit v1.1 From a1bd6200eccd3a02040a955d5f43d3ee1fc9f93b Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Mon, 25 Jun 2007 17:03:13 +0200 Subject: ppc4xx: PPC440EPx Emit DDR0 registers on machine check interrupt This patch prints the DDR status registers upon machine check interrupt on the 440EPx/GRx. This can be useful especially when ECC support is enabled. I added some small changes to the original patch from Niklaus to make it compile clean. Signed-off-by: Niklaus Giger Signed-off-by: Stefan Roese --- cpu/ppc4xx/traps.c | 87 +++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 86 insertions(+), 1 deletion(-) mode change 100644 => 100755 cpu/ppc4xx/traps.c (limited to 'cpu') diff --git a/cpu/ppc4xx/traps.c b/cpu/ppc4xx/traps.c old mode 100644 new mode 100755 index 7c44a29..eb9420e --- a/cpu/ppc4xx/traps.c +++ b/cpu/ppc4xx/traps.c @@ -145,6 +145,9 @@ void MachineCheckException(struct pt_regs *regs) { unsigned long fixup, val; +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + u32 value2; +#endif /* Probing PCI using config cycles cause this exception * when a device is not present. Catch it and return to @@ -203,7 +206,89 @@ MachineCheckException(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, val); } -#endif +#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) + mfsdram(DDR0_00, val) ; + printf("DDR0: DDR0_00 %p\n", val); + val = (val >> 16) & 0xff; + if (val & 0x80) + printf("DDR0: At least one interrupt active\n"); + if (val & 0x40) + printf("DDR0: DRAM initialization complete.\n"); + if (val & 0x20) + printf("DDR0: Multiple uncorrectable ECC events.\n"); + if (val & 0x10) + printf("DDR0: Single uncorrectable ECC event.\n"); + if (val & 0x08) + printf("DDR0: Multiple correctable ECC events.\n"); + if (val & 0x04) + printf("DDR0: Single correctable ECC event.\n"); + if (val & 0x02) + printf("Multiple accesses outside the defined" + " physical memory space detected\n"); + if (val & 0x01) + printf("DDR0: Single access outside the defined" + " physical memory space detected.\n"); + + mfsdram(DDR0_01, val); + val = (val >> 8) & 0x7; + switch (val ) { + case 0: + printf("DDR0: Write Out-of-Range command\n"); + break; + case 1: + printf("DDR0: Read Out-of-Range command\n"); + break; + case 2: + printf("DDR0: Masked write Out-of-Range command\n"); + break; + case 4: + printf("DDR0: Wrap write Out-of-Range command\n"); + break; + case 5: + printf("DDR0: Wrap read Out-of-Range command\n"); + break; + default: + mfsdram(DDR0_01, value2); + printf("DDR0: No DDR0 error know 0x%x %p\n", val, value2); + } + mfsdram(DDR0_23, val); + if ( (val >> 16) & 0xff) + printf("DDR0: Syndrome for correctable ECC event 0x%x\n", + (val >> 16) & 0xff); + mfsdram(DDR0_23, val); + if ( (val >> 8) & 0xff) + printf("DDR0: Syndrome for uncorrectable ECC event 0x%x\n", + (val >> 8) & 0xff); + mfsdram(DDR0_33, val); + if (val) + printf("DDR0: Address of command that caused an " + "Out-of-Range interrupt %p\n", val); + mfsdram(DDR0_34, val); + if (val) + printf("DDR0: Address of uncorrectable ECC event %p\n", val); + mfsdram(DDR0_35, val); + if (val) + printf("DDR0: Address of uncorrectable ECC event %p\n", val); + mfsdram(DDR0_36, val); + if (val) + printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + mfsdram(DDR0_37, val); + if (val) + printf("DDR0: Data of uncorrectable ECC event 0x%08x\n", val); + mfsdram(DDR0_38, val); + if (val) + printf("DDR0: Address of correctable ECC event %p\n", val); + mfsdram(DDR0_39, val); + if (val) + printf("DDR0: Address of correctable ECC event %p\n", val); + mfsdram(DDR0_40, val); + if (val) + printf("DDR0: Data of correctable ECC event 0x%08x\n", val); + mfsdram(DDR0_41, val); + if (val) + printf("DDR0: Data of correctable ECC event 0x%08x\n", val); +#endif /* CONFIG_440EPX */ +#endif /* CONFIG_440 */ show_regs(regs); print_backtrace((unsigned long *)regs->gpr[1]); panic("machine check"); -- cgit v1.1 From a5d71e290f3673269be8eefb4ec44f53412f9461 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Mon, 25 Jun 2007 19:11:37 +0200 Subject: [PCS440EP] get rid of CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG Signed-off-by: Heiko Schocher --- cpu/ppc4xx/44x_spd_ddr.c | 32 ++++++++++--------- cpu/ppc4xx/44x_spd_ddr2.c | 79 ++++++++++++++++++++++++----------------------- 2 files changed, 58 insertions(+), 53 deletions(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 8621aa0..a384392 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -70,12 +70,14 @@ #define ONE_BILLION 1000000000 -#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) -extern void spd_ddr_init_hang (void); -#define HANG() spd_ddr_init_hang() -#else -#define HANG() hang() -#endif +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); /*----------------------------------------------------------------------------- | Memory Controller Options 0 @@ -474,7 +476,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -497,7 +499,7 @@ static void check_mem_type(unsigned long *dimm_populated, dimm_num); printf("Only DDR SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } } @@ -517,7 +519,7 @@ static void check_volt_type(unsigned long *dimm_populated, if (voltage_type != 0x04) { printf("ERROR: DIMM %lu with unsupported voltage level.\n", dimm_num); - HANG(); + spd_ddr_init_hang (); } else { debug("DIMM %lu voltage level supported.\n", dimm_num); } @@ -588,7 +590,7 @@ static void program_cfg0(unsigned long *dimm_populated, printf("WARNING: DIMM with datawidth of %lu bits.\n", data_width); printf("Only DIMMs with 32 or 64 bit datawidths supported.\n"); - HANG(); + spd_ddr_init_hang (); } break; } @@ -776,7 +778,7 @@ static void program_tr0(unsigned long *dimm_populated, if ((tcyc_reg & 0x0F) >= 10) { printf("ERROR: Tcyc incorrect for DIMM in slot %lu\n", dimm_num); - HANG(); + spd_ddr_init_hang (); } cycle_time_ns_x_10[cas_index] = @@ -856,7 +858,7 @@ static void program_tr0(unsigned long *dimm_populated, printf("ERROR: No supported CAS latency with the installed DIMMs.\n"); printf("Only CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range.\n"); - HANG(); + spd_ddr_init_hang (); } /* @@ -1168,7 +1170,7 @@ static void program_tr1(void) */ if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay.\n"); - HANG(); + spd_ddr_init_hang (); } /* @@ -1318,7 +1320,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", bank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } switch (num_col_addr) { @@ -1340,7 +1342,7 @@ static unsigned long program_bxcr(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } /* diff --git a/cpu/ppc4xx/44x_spd_ddr2.c b/cpu/ppc4xx/44x_spd_ddr2.c index d748dae..626b3e6 100644 --- a/cpu/ppc4xx/44x_spd_ddr2.c +++ b/cpu/ppc4xx/44x_spd_ddr2.c @@ -129,12 +129,15 @@ #define MY_TLB_WORD2_I_ENABLE TLB_WORD2_I_ENABLE /* disable caching on SDRAM */ #endif -#if defined(CONFIG_PPC4xx_USE_SPD_DDR_INIT_HANG) -extern void spd_ddr_init_hang (void); -#define HANG() spd_ddr_init_hang() -#else -#define HANG() hang() -#endif +/* + * Board-specific Platform code can reimplement spd_ddr_init_hang () if needed + */ +void __spd_ddr_init_hang (void) +{ + hang (); +} +void spd_ddr_init_hang (void) __attribute__((weak, alias("__spd_ddr_init_hang"))); + /* Private Structure Definitions */ @@ -589,7 +592,7 @@ static void get_spd_info(unsigned long *dimm_populated, if (dimm_found == FALSE) { printf("ERROR - No memory installed. Install a DDR-SDRAM DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -636,42 +639,42 @@ static void check_mem_type(unsigned long *dimm_populated, "slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 2: printf("ERROR: EDO DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 3: printf("ERROR: Pipelined Nibble DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 4: printf("ERROR: SDRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 5: printf("ERROR: Multiplexed ROM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 6: printf("ERROR: SGRAM DIMM detected in slot %d.\n", (unsigned int)dimm_num); printf("Only DDR and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; case 7: debug("DIMM slot %d: DDR1 SDRAM detected\n", dimm_num); @@ -686,7 +689,7 @@ static void check_mem_type(unsigned long *dimm_populated, (unsigned int)dimm_num); printf("Only DDR1 and DDR2 SDRAM DIMMs are supported.\n"); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } } @@ -696,7 +699,7 @@ static void check_mem_type(unsigned long *dimm_populated, && (dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_populated[dimm_num-1] != dimm_populated[dimm_num])) { printf("ERROR: DIMM's DDR1 and DDR2 type can not be mixed.\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -771,7 +774,7 @@ static void check_frequency(unsigned long *dimm_populated, (unsigned int)(calc_cycle_time*10)); printf("Replace the DIMM, or change DDR frequency via " "strapping bits.\n\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -803,7 +806,7 @@ static void check_rank_number(unsigned long *dimm_populated, "slot %d is not supported.\n", dimm_rank, dimm_num); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } else total_rank += dimm_rank; } @@ -812,7 +815,7 @@ static void check_rank_number(unsigned long *dimm_populated, "for all slots.\n", (unsigned int)total_rank); printf("Only %d ranks are supported for all DIMM.\n", MAXRANKS); printf("Remove one of the DIMM modules.\n\n"); - HANG(); + spd_ddr_init_hang (); } } } @@ -837,28 +840,28 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("This DIMM is 5.0 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x01: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is LVTTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x02: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 1.5 Volt.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x03: printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("This DIMM is 3.3 Volt/TTL.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; case 0x04: /* 2.5 Voltage only for DDR1 */ @@ -870,7 +873,7 @@ static void check_voltage_type(unsigned long *dimm_populated, printf("ERROR: Only DIMMs DDR 2.5V or DDR2 1.8V are supported.\n"); printf("Replace the DIMM module in slot %d with a supported DIMM.\n\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); break; } } @@ -1013,13 +1016,13 @@ static void program_copt1(unsigned long *dimm_populated, if ((dimm_populated[0] != SDRAM_NONE) && (dimm_populated[1] != SDRAM_NONE)) { if (buf0 != buf1) { printf("ERROR: DIMM's buffered/unbuffered, registered, clocking don't match.\n"); - HANG(); + spd_ddr_init_hang (); } } if ((dimm_64bit == TRUE) && (dimm_32bit == TRUE)) { printf("ERROR: Cannot mix 32 bit and 64 bit DDR-SDRAM DIMMs together.\n"); - HANG(); + spd_ddr_init_hang (); } else if ((dimm_64bit == TRUE) && (dimm_32bit == FALSE)) { mcopt1 |= SDRAM_MCOPT1_DMWD_64; @@ -1027,7 +1030,7 @@ static void program_copt1(unsigned long *dimm_populated, mcopt1 |= SDRAM_MCOPT1_DMWD_32; } else { printf("ERROR: Please install only 32 or 64 bit DDR-SDRAM DIMMs.\n\n"); - HANG(); + spd_ddr_init_hang (); } if (ecc_enabled == TRUE) @@ -1216,7 +1219,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: ucode error on selected_cas value %d", selected_cas); - HANG(); + spd_ddr_init_hang (); break; } @@ -1248,7 +1251,7 @@ static void program_initplr(unsigned long *dimm_populated, break; default: printf("ERROR: write recovery not support (%d)", write_recovery); - HANG(); + spd_ddr_init_hang (); break; } #else @@ -1266,7 +1269,7 @@ static void program_initplr(unsigned long *dimm_populated, ods = ODS_REDUCED; } else { printf("ERROR: Unsupported number of DIMM's (%d)", total_dimm); - HANG(); + spd_ddr_init_hang (); } mr = CMD_EMR | SELECT_MR | BURST_LEN_4 | wr | cas; @@ -1291,7 +1294,7 @@ static void program_initplr(unsigned long *dimm_populated, mtsdram(SDRAM_INITPLR13, 0x80800000 | emr); /* EMR OCD Exit */ } else { printf("ERROR: ucode error as unknown DDR type in program_initplr"); - HANG(); + spd_ddr_init_hang (); } } @@ -1396,7 +1399,7 @@ static void program_mode(unsigned long *dimm_populated, } else { printf("ERROR: SPD reported Tcyc is incorrect for DIMM " "in slot %d\n", (unsigned int)dimm_num); - HANG(); + spd_ddr_init_hang (); } } else { /* Convert from hex to decimal */ @@ -1533,7 +1536,7 @@ static void program_mode(unsigned long *dimm_populated, printf("ERROR: Cannot find a supported CAS latency with the installed DIMMs.\n"); printf("Only DIMMs DDR1 with CAS latencies of 2.0, 2.5, and 3.0 are supported.\n"); printf("Make sure the PLB speed is within the supported range of the DIMMs.\n\n"); - HANG(); + spd_ddr_init_hang (); } } else { /* DDR2 */ debug("cas_3_0_available=%d\n", cas_3_0_available); @@ -1556,7 +1559,7 @@ static void program_mode(unsigned long *dimm_populated, cas_3_0_available, cas_4_0_available, cas_5_0_available); printf("sdram_freq=%d cycle3=%d cycle4=%d cycle5=%d\n\n", sdram_freq, cycle_3_0_clk, cycle_4_0_clk, cycle_5_0_clk); - HANG(); + spd_ddr_init_hang (); } } @@ -1665,7 +1668,7 @@ static void program_rtr(unsigned long *dimm_populated, printf("ERROR: DIMM %d unsupported refresh rate/type.\n", (unsigned int)dimm_num); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); break; } @@ -2073,7 +2076,7 @@ static void program_bxcf(unsigned long *dimm_populated, printf("ERROR: Unsupported value for number of " "column addresses: %d.\n", (unsigned int)num_col_addr); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } } @@ -2155,7 +2158,7 @@ static void program_memory_queue(unsigned long *dimm_populated, printf("ERROR: Unsupported value for the banksize: %d.\n", (unsigned int)rank_size_id); printf("Replace the DIMM module with a supported DIMM.\n\n"); - HANG(); + spd_ddr_init_hang (); } if ((dimm_populated[dimm_num] != SDRAM_NONE) && (dimm_num == 1)) @@ -2700,7 +2703,7 @@ calibration_loop: printf("\nERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); debug("%s[%d] ERROR : \n", __FUNCTION__,__LINE__); - HANG(); + spd_ddr_init_hang (); } blank_string(strlen(str)); @@ -2856,7 +2859,7 @@ static void test(void) if (window_found == FALSE) { printf("ERROR: Cannot determine a common read delay for the " "DIMM(s) installed.\n"); - HANG(); + spd_ddr_init_hang (); } /*------------------------------------------------------------------ -- cgit v1.1 From b44896215a09c60fa40cae906f7ed207bbc2c492 Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Thu, 5 Jul 2007 08:17:37 +0200 Subject: Merged POST framework with the current TOT. Signed-off-by: Sergei Poselenov --- cpu/ppc4xx/start.S | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'cpu') diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index dfe813c..6086b6c 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1217,15 +1217,23 @@ mck_return: * NOTE: currently the 440s run with dcache _disabled_ once relocated to DRAM, * although for some cache-ralated calls stubs have to be provided to satisfy * symbols resolution. + * Icache-related functions are used in POST framework. * */ #ifdef CONFIG_440 .globl dcache_disable + .globl icache_disable + .globl icache_enable dcache_disable: +icache_disable: +icache_enable: blr .globl dcache_status + .globl icache_status dcache_status: +icache_status: + mr r3, 0 blr #else flush_dcache: -- cgit v1.1 From 4ef218f6fdf8d747f4589da5252b004e7d2c2876 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 10 Jul 2007 00:01:28 +0200 Subject: Coding style cleanup; update CHANGELOG. Signed-off-by: Wolfgang Denk --- cpu/ppc4xx/start.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 6086b6c..8ecaaea 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1222,7 +1222,7 @@ mck_return: */ #ifdef CONFIG_440 .globl dcache_disable - .globl icache_disable + .globl icache_disable .globl icache_enable dcache_disable: icache_disable: -- cgit v1.1 From fa1df308926a6f70e3504c57514ef27ac31fd13a Mon Sep 17 00:00:00 2001 From: Bartlomiej Sieka Date: Wed, 11 Jul 2007 20:11:07 +0200 Subject: CM1.QP1: Support for the Schindler CM1.QP1 board. Signed-off-by: Piotr Kruszynski Signed-off-by: Bartlomiej Sieka --- cpu/mpc5xxx/fec.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-) (limited to 'cpu') diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c index 8136366..3d99d5c 100644 --- a/cpu/mpc5xxx/fec.c +++ b/cpu/mpc5xxx/fec.c @@ -889,13 +889,20 @@ int mpc5xxx_fec_initialize(bd_t * bis) fec->eth = (ethernet_regs *)MPC5XXX_FEC; fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_CANMB) || defined(CONFIG_HMI1001) || \ - defined(CONFIG_ICECUBE) || defined(CONFIG_INKA4X0) || \ - defined(CONFIG_JUPITER) || defined(CONFIG_MCC200) || \ - defined(CONFIG_MOTIONPRO)|| defined(CONFIG_O2DNT) || \ - defined(CONFIG_PM520) || defined(CONFIG_TOP5200) || \ - defined(CONFIG_TQM5200) || defined(CONFIG_UC101) || \ - defined(CONFIG_V38B) +#if defined(CONFIG_CANMB) || \ + defined(CONFIG_CM1_QP1) || \ + defined(CONFIG_HMI1001) || \ + defined(CONFIG_ICECUBE) || \ + defined(CONFIG_INKA4X0) || \ + defined(CONFIG_JUPITER) || \ + defined(CONFIG_MCC200) || \ + defined(CONFIG_MOTIONPRO) || \ + defined(CONFIG_O2DNT) || \ + defined(CONFIG_PM520) || \ + defined(CONFIG_TOP5200) || \ + defined(CONFIG_TQM5200) || \ + defined(CONFIG_UC101) || \ + defined(CONFIG_V38B) # ifndef CONFIG_FEC_10MBIT fec->xcv_type = MII100; # else -- cgit v1.1 From 239f05ee4dd4cfe0b50f251b533dcebe9e67c360 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 12 Jul 2007 01:45:34 +0200 Subject: Update CHANGELOG, minor coding style cleanup. Signed-off-by: Wolfgang Denk --- cpu/ppc4xx/44x_spd_ddr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/ppc4xx/44x_spd_ddr.c b/cpu/ppc4xx/44x_spd_ddr.c index 8c18d0f..6d6fba1 100644 --- a/cpu/ppc4xx/44x_spd_ddr.c +++ b/cpu/ppc4xx/44x_spd_ddr.c @@ -1017,7 +1017,7 @@ static int short_mem_test(void) */ for (i = 0; i < NUMMEMTESTS; i++) { for (j = 0; j < NUMMEMWORDS; j++) { -//printf("bank enabled base:%x\n", &membase[j]); + /* printf("bank enabled base:%x\n", &membase[j]); */ membase[j] = test[i][j]; ppcDcbf((unsigned long)&(membase[j])); } -- cgit v1.1