From 4ef01010aa4799c759d75e67007fdd3a38c88c8a Mon Sep 17 00:00:00 2001 From: Vivek Mahajan Date: Mon, 25 May 2009 17:23:16 +0530 Subject: mpc83xx: USB: Reorganized its support The following patch reorganizes/reworks the USB support for mpc83xx as under:- * Moves the 83xx USB clock init from drivers/usb/host/ehci-fsl.c to cpu/mpx83xx/cpu_init.c * Board specific usb_phy_type is read from the environment * Adds USB EHCI specific structure in include/usb/ehci-fsl.h * Copyrights revamped in most of the following files Signed-off-by: Vivek Mahajan Signed-off-by: Remy Bohmer --- cpu/mpc83xx/cpu_init.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-) (limited to 'cpu') diff --git a/cpu/mpc83xx/cpu_init.c b/cpu/mpc83xx/cpu_init.c index d9b96b5..414565c 100644 --- a/cpu/mpc83xx/cpu_init.c +++ b/cpu/mpc83xx/cpu_init.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. + * Copyright (C) 2004-2009 Freescale Semiconductor, Inc. * * See file CREDITS for list of people who contributed to this * project. @@ -23,6 +23,10 @@ #include #include #include +#ifdef CONFIG_USB_EHCI_FSL +#include +#include +#endif DECLARE_GLOBAL_DATA_PTR; @@ -294,6 +298,19 @@ void cpu_init_f (volatile immap_t * im) im->gpio[1].dat = CONFIG_SYS_GPIO2_DAT; im->gpio[1].dir = CONFIG_SYS_GPIO2_DIR; #endif +#ifdef CONFIG_USB_EHCI_FSL + uint32_t temp; + struct usb_ehci *ehci = (struct usb_ehci *)CONFIG_SYS_MPC8xxx_USB_ADDR; + + /* Configure interface. */ + setbits_be32((void *)ehci->control, REFSEL_16MHZ | UTMI_PHY_EN); + + /* Wait for clock to stabilize */ + do { + temp = in_be32((void *)ehci->control); + udelay(1000); + } while (!(temp & PHY_CLK_VALID)); +#endif } int cpu_init_r (void) -- cgit v1.1