From d4024bb72dd81695ec099b2199eda0d27c623e62 Mon Sep 17 00:00:00 2001 From: John Otken Date: Thu, 26 Jul 2007 17:49:11 +0200 Subject: ppc4xx: Add support for AMCC 405EP Taihu board Signed-off-by: John Otken --- cpu/ppc4xx/gpio.c | 2 ++ cpu/ppc4xx/sdram.c | 11 ++++++++++- cpu/ppc4xx/start.S | 33 +++++++++++++++++++++++++++++++++ 3 files changed, 45 insertions(+), 1 deletion(-) (limited to 'cpu/ppc4xx') diff --git a/cpu/ppc4xx/gpio.c b/cpu/ppc4xx/gpio.c index 0d0e273..50f2fdf 100644 --- a/cpu/ppc4xx/gpio.c +++ b/cpu/ppc4xx/gpio.c @@ -186,6 +186,7 @@ void gpio_set_chip_configuration(void) out32(GPIO0_TCR, reg); } +#ifdef GPIO1 if (gpio_core == GPIO1) { /* * Setup output value @@ -203,6 +204,7 @@ void gpio_set_chip_configuration(void) reg = in32(GPIO1_TCR) | (0x80000000 >> (i)); out32(GPIO1_TCR, reg); } +#endif /* GPIO1 */ reg = in32(GPIO_OS(core_add+offs)) & ~(GPIO_MASK >> (j*2)); diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index d520cd3..3a0ca17 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -209,8 +209,17 @@ void sdram_init(void) if (get_ram_size(0, mb0cf[i].size) == mb0cf[i].size) { /* - * OK, size detected -> all done + * OK, size detected. Enable second bank if + * defined (assumes same type as bank 0) */ +#ifdef CONFIG_SDRAM_BANK1 + u32 b1cr = mb0cf[i].size | mb0cf[i].reg; + + mtsdram0(mem_mcopt1, 0x00000000); + mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram0(mem_mcopt1, 0x80800000); + udelay(10000); +#endif return; } } diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 8ecaaea..18d3445 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,6 +1869,11 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_0 /* serial eeprom present */ +#endif #ifndef CFG_CPC0_PCI li r3,CPC0_PCI_HOST_CFG_EN @@ -1886,12 +1891,16 @@ ppc405ep_init: beq ..pci_cfg_set /* if not set, then bypass reg write*/ #endif ori r3,r3,CPC0_PCI_ARBIT_EN +#ifdef CONFIG_TAIHU + ori r3,r3,CPC0_PCI_SPE +#endif #else /* CFG_CPC0_PCI */ li r3,CFG_CPC0_PCI #endif /* CFG_CPC0_PCI */ ..pci_cfg_set: mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ +strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1947,11 +1956,35 @@ ppc405ep_init: ..no_pllset: #endif /* CONFIG_BUBINGA */ +#ifdef CONFIG_TAIHU + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + addis r5,0,CPLD_REG0_ADDR@h + ori r5,r5,CPLD_REG0_ADDR@l + andi. r5, r5, 0x10 + bne _pci_66mhz +#endif /* CONFIG_TAIHU */ + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ ori r4,r4,PLLMR1_DEFAULT@l /* */ +#ifdef CONFIG_TAIHU + b 1f +_pci_66mhz: + addis r3,0,PLLMR0_DEFAULT_PCI66@h + ori r3,r3,PLLMR0_DEFAULT_PCI66@l + addis r4,0,PLLMR1_DEFAULT_PCI66@h + ori r4,r4,PLLMR1_DEFAULT_PCI66@l + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 +1: +#endif /* CONFIG_TAIHU */ + b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: -- cgit v1.1 From 779e975117a75e91fcebe226a63104dbfb924ab1 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 14 Aug 2007 14:44:41 +0200 Subject: ppc4xx: Add initial Zeus (PPC405EP) board support Signed-off-by: Stefan Roese --- cpu/ppc4xx/sdram.c | 27 +++++++++++++++++++-------- cpu/ppc4xx/sdram.h | 2 -- cpu/ppc4xx/start.S | 48 ++++++++++++++++-------------------------------- 3 files changed, 35 insertions(+), 42 deletions(-) (limited to 'cpu/ppc4xx') diff --git a/cpu/ppc4xx/sdram.c b/cpu/ppc4xx/sdram.c index 3a0ca17..2724d91 100644 --- a/cpu/ppc4xx/sdram.c +++ b/cpu/ppc4xx/sdram.c @@ -187,14 +187,14 @@ void sdram_init(void) /* * Disable memory controller. */ - mtsdram0(mem_mcopt1, 0x00000000); + mtsdram(mem_mcopt1, 0x00000000); /* * Set MB0CF for bank 0. */ - mtsdram0(mem_mb0cf, mb0cf[i].reg); - mtsdram0(mem_sdtr1, sdtr1); - mtsdram0(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); + mtsdram(mem_mb0cf, mb0cf[i].reg); + mtsdram(mem_sdtr1, sdtr1); + mtsdram(mem_rtr, compute_rtr(speed, mb0cf[i].rows, 64)); udelay(200); @@ -203,7 +203,7 @@ void sdram_init(void) * Set DC_EN to '1' and BRD_PRF to '01' for 16 byte PLB Burst * read/prefetch. */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); @@ -215,10 +215,21 @@ void sdram_init(void) #ifdef CONFIG_SDRAM_BANK1 u32 b1cr = mb0cf[i].size | mb0cf[i].reg; - mtsdram0(mem_mcopt1, 0x00000000); - mtsdram0(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ - mtsdram0(mem_mcopt1, 0x80800000); + mtsdram(mem_mcopt1, 0x00000000); + mtsdram(mem_mb1cf, b1cr); /* SDRAM0_B1CR */ + mtsdram(mem_mcopt1, 0x80800000); udelay(10000); + + /* + * Check if 2nd bank is really available. + * If the size not equal to the size of the first + * bank, then disable the 2nd bank completely. + */ + if (get_ram_size((long *)mb0cf[i].size, mb0cf[i].size) != + mb0cf[i].size) { + mtsdram(mem_mb1cf, 0); + mtsdram(mem_mcopt1, 0); + } #endif return; } diff --git a/cpu/ppc4xx/sdram.h b/cpu/ppc4xx/sdram.h index 62b5442..4fb9b1a 100644 --- a/cpu/ppc4xx/sdram.h +++ b/cpu/ppc4xx/sdram.h @@ -29,8 +29,6 @@ #include -#define mtsdram0(reg, data) mtdcr(memcfga,reg);mtdcr(memcfgd,data) - #define ONE_BILLION 1000000000 struct sdram_conf_s { diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S index 18d3445..9626b65 100644 --- a/cpu/ppc4xx/start.S +++ b/cpu/ppc4xx/start.S @@ -1869,38 +1869,7 @@ ppc405ep_init: ori r3,r3,CFG_EBC_PB4CR@l mtdcr ebccfgd,r3 #endif -#ifdef CONFIG_TAIHU - mfdcr r4, CPC0_BOOT - andi. r5, r4, CPC0_BOOT_SEP@l - bne strap_0 /* serial eeprom present */ -#endif - -#ifndef CFG_CPC0_PCI - li r3,CPC0_PCI_HOST_CFG_EN -#ifdef CONFIG_BUBINGA - /* - !----------------------------------------------------------------------- - ! Check FPGA for PCI internal/external arbitration - ! If board is set to internal arbitration, update cpc0_pci - !----------------------------------------------------------------------- - */ - addis r5,r0,FPGA_REG1@h /* set offset for FPGA_REG1 */ - ori r5,r5,FPGA_REG1@l - lbz r5,0x0(r5) /* read to get PCI arb selection */ - andi. r6,r5,FPGA_REG1_PCI_INT_ARB /* using internal arbiter ?*/ - beq ..pci_cfg_set /* if not set, then bypass reg write*/ -#endif - ori r3,r3,CPC0_PCI_ARBIT_EN -#ifdef CONFIG_TAIHU - ori r3,r3,CPC0_PCI_SPE -#endif -#else /* CFG_CPC0_PCI */ - li r3,CFG_CPC0_PCI -#endif /* CFG_CPC0_PCI */ -..pci_cfg_set: - mtdcr CPC0_PCI, r3 /* Enable internal arbiter*/ -strap_0: /* !----------------------------------------------------------------------- ! Check to see if chip is in bypass mode. @@ -1966,6 +1935,21 @@ strap_0: bne _pci_66mhz #endif /* CONFIG_TAIHU */ +#if defined(CONFIG_ZEUS) + mfdcr r4, CPC0_BOOT + andi. r5, r4, CPC0_BOOT_SEP@l + bne strap_1 /* serial eeprom present */ + lis r3,0x0000 + addi r3,r3,0x3030 + lis r4,0x8042 + addi r4,r4,0x223e + b 1f +strap_1: + mfdcr r3, CPC0_PLLMR0 + mfdcr r4, CPC0_PLLMR1 + b 1f +#endif + addis r3,0,PLLMR0_DEFAULT@h /* PLLMR0 default value */ ori r3,r3,PLLMR0_DEFAULT@l /* */ addis r4,0,PLLMR1_DEFAULT@h /* PLLMR1 default value */ @@ -1982,9 +1966,9 @@ _pci_66mhz: strap_1: mfdcr r3, CPC0_PLLMR0 mfdcr r4, CPC0_PLLMR1 -1: #endif /* CONFIG_TAIHU */ +1: b pll_write /* Write the CPC0_PLLMR with new value */ pll_done: -- cgit v1.1