From 1fd5699a4a24f5c1dab1b32f480bace1ebb9fc3e Mon Sep 17 00:00:00 2001 From: Jon Loeliger Date: Tue, 10 Oct 2006 17:19:03 -0500 Subject: Coding style changes to remove local varible blocks and reformat a bit nicer. --- cpu/mpc86xx/spd_sdram.c | 138 ++++++++++++++++++++++-------------------------- 1 file changed, 64 insertions(+), 74 deletions(-) (limited to 'cpu/mpc86xx/spd_sdram.c') diff --git a/cpu/mpc86xx/spd_sdram.c b/cpu/mpc86xx/spd_sdram.c index 39da3cc..97bbf43 100644 --- a/cpu/mpc86xx/spd_sdram.c +++ b/cpu/mpc86xx/spd_sdram.c @@ -152,6 +152,28 @@ convert_bcd_tenths_to_cycle_time_ps(unsigned int spd_val) } +/* + * Determine Refresh Rate. Ignore self refresh bit on DDR I. + * Table from SPD Spec, Byte 12, converted to picoseconds and + * filled in with "default" normal values. + */ +unsigned int determine_refresh_rate(unsigned int spd_refresh) +{ + unsigned int refresh_time_ns[8] = { + 15625000, /* 0 Normal 1.00x */ + 3900000, /* 1 Reduced .25x */ + 7800000, /* 2 Extended .50x */ + 31300000, /* 3 Extended 2.00x */ + 62500000, /* 4 Extended 4.00x */ + 125000000, /* 5 Extended 8.00x */ + 15625000, /* 6 Normal 1.00x filler */ + 15625000, /* 7 Normal 1.00x filler */ + }; + + return picos_to_clk(refresh_time_ns[spd_refresh & 0x7]); +} + + long int spd_init(unsigned char i2c_address, unsigned int ddr_num, unsigned int dimm_num, unsigned int start_addr) @@ -164,6 +186,10 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num, unsigned int rank_density; unsigned int odt_rd_cfg, odt_wr_cfg; unsigned int odt_cfg, mode_odt_enable; + unsigned int refresh_clk; +#ifdef MPC86xx_DDR_SDRAM_CLK_CNTL + unsigned char clk_adjust; +#endif unsigned int dqs_cfg; unsigned char twr_clk, twtr_clk, twr_auto_clk; unsigned int tCKmin_ps, tCKmax_ps; @@ -197,7 +223,6 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num, /* * Read SPD information. */ - debug("Performing SPD read at I2C address 0x%02lx\n",i2c_address); memset((void *)&spd, 0, sizeof(spd)); CFG_READ_SPD(i2c_address, 0, 1, (uchar *) &spd, sizeof(spd)); @@ -757,7 +782,6 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num, twr_auto_clk = (spd.twr * 250 + tCKmax_ps - 1) / tCKmax_ps; } - /* * Mode Reg in bits 16 ~ 31, * Extended Mode Reg 1 in bits 0 ~ 15. @@ -783,45 +807,28 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num, debug("DDR: sdram_mode = 0x%08x\n", ddr->sdram_mode_1); - /* * Clear EMRS2 and EMRS3. */ ddr->sdram_mode_2 = 0; debug("DDR: sdram_mode_2 = 0x%08x\n", ddr->sdram_mode_2); - /* - * Determine Refresh Rate. Ignore self refresh bit on DDR I. - * Table from SPD Spec, Byte 12, converted to picoseconds and - * filled in with "default" normal values. + * Determine Refresh Rate. */ - { - unsigned int refresh_clk; - unsigned int refresh_time_ns[8] = { - 15625000, /* 0 Normal 1.00x */ - 3900000, /* 1 Reduced .25x */ - 7800000, /* 2 Extended .50x */ - 31300000, /* 3 Extended 2.00x */ - 62500000, /* 4 Extended 4.00x */ - 125000000, /* 5 Extended 8.00x */ - 15625000, /* 6 Normal 1.00x filler */ - 15625000, /* 7 Normal 1.00x filler */ - }; + refresh_clk = determine_refresh_rate(spd.refresh & 0x7); - refresh_clk = picos_to_clk(refresh_time_ns[spd.refresh & 0x7]); + /* + * Set BSTOPRE to 0x100 for page mode + * If auto-charge is used, set BSTOPRE = 0 + */ + ddr->sdram_interval = + (0 + | (refresh_clk & 0x3fff) << 16 + | 0x100 + ); + debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval); - /* - * Set BSTOPRE to 0x100 for page mode - * If auto-charge is used, set BSTOPRE = 0 - */ - ddr->sdram_interval = - (0 - | (refresh_clk & 0x3fff) << 16 - | 0x100 - ); - debug("DDR: sdram_interval = 0x%08x\n", ddr->sdram_interval); - } /* * Is this an ECC DDR chip? @@ -885,31 +892,25 @@ spd_init(unsigned char i2c_address, unsigned int ddr_num, #ifdef MPC86xx_DDR_SDRAM_CLK_CNTL - { - unsigned char clk_adjust; - - /* - * Setup the clock control. - * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1 - * SDRAM_CLK_CNTL[5-7] = Clock Adjust - * 0110 3/4 cycle late - * 0111 7/8 cycle late - */ - if (spd.mem_type == SPD_MEMTYPE_DDR) { - clk_adjust = 0x6; - } else { - clk_adjust = 0x7; - } + /* + * Setup the clock control. + * SDRAM_CLK_CNTL[0] = Source synchronous enable == 1 + * SDRAM_CLK_CNTL[5-7] = Clock Adjust + * 0110 3/4 cycle late + * 0111 7/8 cycle late + */ + if (spd.mem_type == SPD_MEMTYPE_DDR) + clk_adjust = 0x6; + else + clk_adjust = 0x7; - ddr->sdram_clk_cntl = (0 + ddr->sdram_clk_cntl = (0 | 0x80000000 | (clk_adjust << 23) ); - debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl); - } + debug("DDR: sdram_clk_cntl = 0x%08x\n", ddr->sdram_clk_cntl); #endif - /* * Figure out memory size in Megabytes. */ @@ -1259,10 +1260,9 @@ spd_sdram(void) */ if (!ddr1_enabled && !ddr2_enabled) return 0; - else { - printf("Non-interleaved"); - return memsize_total * 1024 * 1024; - } + + printf("Non-interleaved"); + return memsize_total * 1024 * 1024; #endif /* CONFIG_DDR_INTERLEAVE */ } @@ -1297,26 +1297,16 @@ ddr_enable_ecc(unsigned int dram_size) } } - /* 8K */ - dma_xfer((uint *)0x2000, 0x2000, (uint *)0); - /* 16K */ - dma_xfer((uint *)0x4000, 0x4000, (uint *)0); - /* 32K */ - dma_xfer((uint *)0x8000, 0x8000, (uint *)0); - /* 64K */ - dma_xfer((uint *)0x10000, 0x10000, (uint *)0); - /* 128k */ - dma_xfer((uint *)0x20000, 0x20000, (uint *)0); - /* 256k */ - dma_xfer((uint *)0x40000, 0x40000, (uint *)0); - /* 512k */ - dma_xfer((uint *)0x80000, 0x80000, (uint *)0); - /* 1M */ - dma_xfer((uint *)0x100000, 0x100000, (uint *)0); - /* 2M */ - dma_xfer((uint *)0x200000, 0x200000, (uint *)0); - /* 4M */ - dma_xfer((uint *)0x400000, 0x400000, (uint *)0); + dma_xfer((uint *)0x002000, 0x002000, (uint *)0); /* 8K */ + dma_xfer((uint *)0x004000, 0x004000, (uint *)0); /* 16K */ + dma_xfer((uint *)0x008000, 0x008000, (uint *)0); /* 32K */ + dma_xfer((uint *)0x010000, 0x010000, (uint *)0); /* 64K */ + dma_xfer((uint *)0x020000, 0x020000, (uint *)0); /* 128k */ + dma_xfer((uint *)0x040000, 0x040000, (uint *)0); /* 256k */ + dma_xfer((uint *)0x080000, 0x080000, (uint *)0); /* 512k */ + dma_xfer((uint *)0x100000, 0x100000, (uint *)0); /* 1M */ + dma_xfer((uint *)0x200000, 0x200000, (uint *)0); /* 2M */ + dma_xfer((uint *)0x400000, 0x400000, (uint *)0); /* 4M */ for (i = 1; i < dram_size / 0x800000; i++) { dma_xfer((uint *)(0x800000*i), 0x800000, (uint *)0); -- cgit v1.1