From 036575c544cf1b69654d8fb334bda69c6ff3da36 Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Sat, 4 Aug 2007 13:37:39 +0800 Subject: mpc83xx: Correct the burst length for DDR2 with 32 bits The burst length should be 4 for DDR2 with 32 bits bus Signed-off-by: Dave Liu --- cpu/mpc83xx/spd_sdram.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'cpu/mpc83xx/spd_sdram.c') diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 647813f..2c17cee 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -574,7 +574,10 @@ long int spd_sdram() /* Check DIMM data bus width */ if (spd.dataw_lsb == 0x20) { - burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ + if (spd.mem_type == SPD_MEMTYPE_DDR) + burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ + if (spd.mem_type == SPD_MEMTYPE_DDR2) + burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ printf("\n DDR DIMM: data bus width is 32 bit"); } else { burstlen = 0x02; /* Others act as 64 bit bus, burst len is 4 */ @@ -730,8 +733,12 @@ long int spd_sdram() sdram_cfg |= 0x10000000; /* The DIMM is 32bit width */ - if (spd.dataw_lsb == 0x20) - sdram_cfg |= 0x000C0000; + if (spd.dataw_lsb == 0x20) { + if (spd.mem_type == SPD_MEMTYPE_DDR) + sdram_cfg |= 0x000C0000; + if (spd.mem_type == SPD_MEMTYPE_DDR2) + sdram_cfg |= 0x00080000; + } ddrc_ecc_enable = 0; -- cgit v1.1 From 49bb59912d21aacb507eb81fd21fb7af650c706c Mon Sep 17 00:00:00 2001 From: Dave Liu Date: Fri, 10 Aug 2007 15:48:59 +0800 Subject: mpc83xx: Suppress the warning 'burstlen' suppress the warning 'burstlen' of spd_sdram. Signed-off-by: Dave Liu --- cpu/mpc83xx/spd_sdram.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu/mpc83xx/spd_sdram.c') diff --git a/cpu/mpc83xx/spd_sdram.c b/cpu/mpc83xx/spd_sdram.c index 2c17cee..54f0c83 100644 --- a/cpu/mpc83xx/spd_sdram.c +++ b/cpu/mpc83xx/spd_sdram.c @@ -576,7 +576,7 @@ long int spd_sdram() if (spd.dataw_lsb == 0x20) { if (spd.mem_type == SPD_MEMTYPE_DDR) burstlen = 0x03; /* 32 bit data bus, burst len is 8 */ - if (spd.mem_type == SPD_MEMTYPE_DDR2) + else burstlen = 0x02; /* 32 bit data bus, burst len is 4 */ printf("\n DDR DIMM: data bus width is 32 bit"); } else { -- cgit v1.1