From affae2bff825c1a8d2cfeaf7b270188d251d39d2 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 17 Aug 2002 09:36:01 +0000 Subject: Initial revision --- cpu/mpc8260/ether_fcc.c | 347 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 347 insertions(+) create mode 100644 cpu/mpc8260/ether_fcc.c (limited to 'cpu/mpc8260/ether_fcc.c') diff --git a/cpu/mpc8260/ether_fcc.c b/cpu/mpc8260/ether_fcc.c new file mode 100644 index 0000000..01ddf5c --- /dev/null +++ b/cpu/mpc8260/ether_fcc.c @@ -0,0 +1,347 @@ +/* + * MPC8260 FCC Fast Ethernet + * + * Copyright (c) 2000 MontaVista Software, Inc. Dan Malek (dmalek@jlc.net) + * + * (C) Copyright 2000 Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +/* + * MPC8260 FCC Fast Ethernet + * Basic ET HW initialization and packet RX/TX routines + * + * This code will not perform the IO port configuration. This should be + * done in the iop_conf_t structure specific for the board. + * + * TODO: + * add a PHY driver to do the negotiation + * reflect negotiation results in FPSMR + * look for ways to configure the board specific stuff elsewhere, eg. + * config_xxx.h or the board directory + */ + +#include +#include +#include +#include +#include +#include + +#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_COMMANDS & CFG_CMD_NET) + +/*---------------------------------------------------------------------*/ +#if (CONFIG_ETHER_INDEX == 1) + +#define PROFF_ENET PROFF_FCC1 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC1_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC1_PAGE + +/*---------------------------------------------------------------------*/ +#elif (CONFIG_ETHER_INDEX == 2) + +#define PROFF_ENET PROFF_FCC2 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC2_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC2_PAGE + +/*---------------------------------------------------------------------*/ +#elif (CONFIG_ETHER_INDEX == 3) + +#define PROFF_ENET PROFF_FCC3 +#define CPM_CR_ENET_SBLOCK CPM_CR_FCC3_SBLOCK +#define CPM_CR_ENET_PAGE CPM_CR_FCC3_PAGE + +/*---------------------------------------------------------------------*/ +#else +#error "FCC Ethernet not correctly defined" +#endif +/*---------------------------------------------------------------------*/ + +/* Maximum input DMA size. Must be a should(?) be a multiple of 4. */ +#define PKT_MAXDMA_SIZE 1520 + +/* The FCC stores dest/src/type, data, and checksum for receive packets. */ +#define PKT_MAXBUF_SIZE 1518 +#define PKT_MINBUF_SIZE 64 + +/* Maximum input buffer size. Must be a multiple of 32. */ +#define PKT_MAXBLR_SIZE 1536 + +#define TOUT_LOOP 1000000 + +#define TX_BUF_CNT 2 +#ifdef __GNUC__ +static char txbuf[TX_BUF_CNT][PKT_MAXBLR_SIZE] __attribute__ ((aligned(8))); +#else +#error "txbuf must be 64-bit aligned" +#endif + +static uint rxIdx; /* index of the current RX buffer */ +static uint txIdx; /* index of the current TX buffer */ + +/* + * FCC Ethernet Tx and Rx buffer descriptors. + * Provide for Double Buffering + * Note: PKTBUFSRX is defined in net.h + */ + +typedef volatile struct rtxbd { + cbd_t rxbd[PKTBUFSRX]; + cbd_t txbd[TX_BUF_CNT]; +} RTXBD; + +/* Good news: the FCC supports external BDs! */ +#ifdef __GNUC__ +static RTXBD rtx __attribute__ ((aligned(8))); +#else +#error "rtx must be 64-bit aligned" +#endif + +int eth_send(volatile void *packet, int length) +{ + int i; + int result = 0; + + if (length <= 0) { + printf("fec: bad packet size: %d\n", length); + goto out; + } + + for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { + if (i >= TOUT_LOOP) { + printf("fec: tx buffer not ready\n"); + goto out; + } + } + + rtx.txbd[txIdx].cbd_bufaddr = (uint)packet; + rtx.txbd[txIdx].cbd_datlen = length; + rtx.txbd[txIdx].cbd_sc |= (BD_ENET_TX_READY | BD_ENET_TX_LAST | + BD_ENET_TX_WRAP); + + for(i=0; rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_READY; i++) { + if (i >= TOUT_LOOP) { + printf("fec: tx error\n"); + goto out; + } + } + +#ifdef ET_DEBUG + printf("cycles: %d status: %04x\n", i, rtx.txbd[txIdx].cbd_sc); +#endif + + /* return only status bits */ + result = rtx.txbd[txIdx].cbd_sc & BD_ENET_TX_STATS; + +out: + return result; +} + +int eth_rx(void) +{ + int length; + + for (;;) + { + if (rtx.rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { + length = -1; + break; /* nothing received - leave for() loop */ + } + length = rtx.rxbd[rxIdx].cbd_datlen; + + if (rtx.rxbd[rxIdx].cbd_sc & 0x003f) { + printf("fec: rx error %04x\n", rtx.rxbd[rxIdx].cbd_sc); + } + else { + /* Pass the packet up to the protocol layers. */ + NetReceive(NetRxPackets[rxIdx], length - 4); + } + + + /* Give the buffer back to the FCC. */ + rtx.rxbd[rxIdx].cbd_datlen = 0; + + /* wrap around buffer index when necessary */ + if ((rxIdx + 1) >= PKTBUFSRX) { + rtx.rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); + rxIdx = 0; + } + else { + rtx.rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; + rxIdx++; + } + } + return length; +} + + +int eth_init(bd_t *bis) +{ + int i; + volatile immap_t *immr = (immap_t *)CFG_IMMR; + volatile cpm8260_t *cp = &(immr->im_cpm); + fcc_enet_t *pram_ptr; + unsigned long mem_addr; + +#if 0 + mii_discover_phy(); +#endif + + /* 28.9 - (1-2): ioports have been set up already */ + + /* 28.9 - (3): connect FCC's tx and rx clocks */ + immr->im_cpmux.cmx_uar = 0; + immr->im_cpmux.cmx_fcr = (immr->im_cpmux.cmx_fcr & ~CFG_CMXFCR_MASK) | + CFG_CMXFCR_VALUE; + + /* 28.9 - (4): GFMR: disable tx/rx, CCITT CRC, Mode Ethernet */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr = + FCC_GFMR_MODE_ENET | FCC_GFMR_TCRC_32; + + /* 28.9 - (5): FPSMR: enable full duplex, select CCITT CRC for Ethernet */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fpsmr = CFG_FCC_PSMR | FCC_PSMR_ENCRC; + + /* 28.9 - (6): FDSR: Ethernet Syn */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fdsr = 0xD555; + + /* reset indeces to current rx/tx bd (see eth_send()/eth_rx()) */ + rxIdx = 0; + txIdx = 0; + + /* Setup Receiver Buffer Descriptors */ + for (i = 0; i < PKTBUFSRX; i++) + { + rtx.rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; + rtx.rxbd[i].cbd_datlen = 0; + rtx.rxbd[i].cbd_bufaddr = (uint)NetRxPackets[i]; + } + rtx.rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; + + /* Setup Ethernet Transmitter Buffer Descriptors */ + for (i = 0; i < TX_BUF_CNT; i++) + { + rtx.txbd[i].cbd_sc = (BD_ENET_TX_PAD | BD_ENET_TX_LAST | BD_ENET_TX_TC); + rtx.txbd[i].cbd_datlen = 0; + rtx.txbd[i].cbd_bufaddr = (uint)&txbuf[i][0]; + } + rtx.txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; + + /* 28.9 - (7): initialise parameter ram */ + pram_ptr = (fcc_enet_t *)&(immr->im_dprambase[PROFF_ENET]); + + /* clear whole structure to make sure all reserved fields are zero */ + memset((void*)pram_ptr, 0, sizeof(fcc_enet_t)); + + /* + * common Parameter RAM area + * + * Allocate space in the reserved FCC area of DPRAM for the + * internal buffers. No one uses this space (yet), so we + * can do this. Later, we will add resource management for + * this area. + */ + mem_addr = CPM_FCC_SPECIAL_BASE + ((CONFIG_ETHER_INDEX-1) * 64); + pram_ptr->fen_genfcc.fcc_riptr = mem_addr; + pram_ptr->fen_genfcc.fcc_tiptr = mem_addr+32; + /* + * Set maximum bytes per receive buffer. + * It must be a multiple of 32. + */ + pram_ptr->fen_genfcc.fcc_mrblr = PKT_MAXBLR_SIZE; + pram_ptr->fen_genfcc.fcc_rstate = (CPMFCR_GBL | CPMFCR_EB | + CFG_CPMFCR_RAMTYPE) << 24; + pram_ptr->fen_genfcc.fcc_rbase = (unsigned int)(&rtx.rxbd[rxIdx]); + pram_ptr->fen_genfcc.fcc_tstate = (CPMFCR_GBL | CPMFCR_EB | + CFG_CPMFCR_RAMTYPE) << 24; + pram_ptr->fen_genfcc.fcc_tbase = (unsigned int)(&rtx.txbd[txIdx]); + + /* protocol-specific area */ + pram_ptr->fen_cmask = 0xdebb20e3; /* CRC mask */ + pram_ptr->fen_cpres = 0xffffffff; /* CRC preset */ + pram_ptr->fen_retlim = 15; /* Retry limit threshold */ + pram_ptr->fen_mflr = PKT_MAXBUF_SIZE; /* maximum frame length register */ + /* + * Set Ethernet station address. + * + * This is supplied in the board information structure, so we + * copy that into the controller. + * So, far we have only been given one Ethernet address. We make + * it unique by setting a few bits in the upper byte of the + * non-static part of the address. + */ +#define ea bis->bi_enetaddr + pram_ptr->fen_paddrh = (ea[5] << 8) + ea[4]; + pram_ptr->fen_paddrm = (ea[3] << 8) + ea[2]; + pram_ptr->fen_paddrl = (ea[1] << 8) + ea[0]; +#undef ea + pram_ptr->fen_minflr = PKT_MINBUF_SIZE; /* minimum frame length register */ + /* pad pointer. use tiptr since we don't need a specific padding char */ + pram_ptr->fen_padptr = pram_ptr->fen_genfcc.fcc_tiptr; + pram_ptr->fen_maxd1 = PKT_MAXDMA_SIZE; /* maximum DMA1 length */ + pram_ptr->fen_maxd2 = PKT_MAXDMA_SIZE; /* maximum DMA2 length */ + pram_ptr->fen_rfthr = 1; + pram_ptr->fen_rfcnt = 1; +#if 0 + printf("pram_ptr->fen_genfcc.fcc_rbase %08lx\n", + pram_ptr->fen_genfcc.fcc_rbase); + printf("pram_ptr->fen_genfcc.fcc_tbase %08lx\n", + pram_ptr->fen_genfcc.fcc_tbase); +#endif + + /* 28.9 - (8): clear out events in FCCE */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fcce = ~0x0; + + /* 28.9 - (9): FCCM: mask all events */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_fccm = 0; + + /* 28.9 - (10-12): we don't use ethernet interrupts */ + + /* 28.9 - (13) + * + * Let's re-initialize the channel now. We have to do it later + * than the manual describes because we have just now finished + * the BD initialization. + */ + cp->cp_cpcr = mk_cr_cmd(CPM_CR_ENET_PAGE, + CPM_CR_ENET_SBLOCK, + 0x0c, + CPM_CR_INIT_TRX) | CPM_CR_FLG; + do { + __asm__ __volatile__ ("eieio"); + } while (cp->cp_cpcr & CPM_CR_FLG); + + /* 28.9 - (14): enable tx/rx in gfmr */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr |= FCC_GFMR_ENT | FCC_GFMR_ENR; + + return 1; +} + +void eth_halt(void) +{ + volatile immap_t *immr = (immap_t *)CFG_IMMR; + + /* write GFMR: disable tx/rx */ + immr->im_fcc[CONFIG_ETHER_INDEX-1].fcc_gfmr &= + ~(FCC_GFMR_ENT | FCC_GFMR_ENR); +} + +#endif /* CONFIG_ETHER_ON_FCC && CFG_CMD_NET */ -- cgit v1.1