From 56523f12830227fc18437bf935fefdb10fe25cca Mon Sep 17 00:00:00 2001 From: wdenk Date: Sun, 11 Jul 2004 17:40:54 +0000 Subject: * Patch by Martin Krause, 30 Jun 2004: Add support for TQM5200 board * Patch by Martin Krause, 29 Jun 2004: Add loopw command: infinite write loop on address range --- cpu/mpc5xxx/cpu_init.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) (limited to 'cpu/mpc5xxx/cpu_init.c') diff --git a/cpu/mpc5xxx/cpu_init.c b/cpu/mpc5xxx/cpu_init.c index ce562c1..3599a86 100644 --- a/cpu/mpc5xxx/cpu_init.c +++ b/cpu/mpc5xxx/cpu_init.c @@ -152,19 +152,25 @@ void cpu_init_f (void) /* enable timebase */ *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (1 << 13); -#if defined(CFG_IPBSPEED_133) +# if defined(CFG_IPBSPEED_133) /* Motorola reports IPB should better run at 133 MHz. */ *(vu_long *)MPC5XXX_ADDECR |= 1; /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ addecr = *(vu_long *)MPC5XXX_CDM_CFG; addecr &= ~0x103; +# if defined(CFG_PCISPEED_66) + /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ + addecr |= 0x01; +# else + /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ addecr |= 0x02; +# endif /* CFG_PCISPEED_66 */ *(vu_long *)MPC5XXX_CDM_CFG = addecr; -#endif +# endif /* CFG_IPBSPEED_133 */ /* Configure the XLB Arbiter */ *(vu_long *)MPC5XXX_XLBARB_MPRIEN = 0xff; *(vu_long *)MPC5XXX_XLBARB_MPRIVAL = 0x11111111; -#endif +#endif /* CONFIG_MPC5200 */ } /* -- cgit v1.1