From 843efb1192cc8fd4f904a23dbab4e0fe3e1c5bc2 Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Sat, 16 May 2009 10:47:43 +0200 Subject: MPC512x: use I/O accessors instead of pointer accesses This commit changes the MPC512x code to use I/O accessor calls (i.e. out_*() and in_*()) instead of using deprecated pointer accesses. Signed-off-by: Wolfgang Denk Cc: John Rigby --- cpu/mpc512x/cpu_init.c | 26 +++++++++++------- cpu/mpc512x/i2c.c | 56 +++++++++++++++++++++------------------ cpu/mpc512x/ide.c | 52 ++++++++++++++++++------------------ cpu/mpc512x/iopin.c | 6 ++--- cpu/mpc512x/pci.c | 71 +++++++++++++++++++++++++++++++------------------- cpu/mpc512x/serial.c | 64 +++++++++++++++++++++++---------------------- cpu/mpc512x/speed.c | 23 +++++++++++----- 7 files changed, 168 insertions(+), 130 deletions(-) (limited to 'cpu/mpc512x') diff --git a/cpu/mpc512x/cpu_init.c b/cpu/mpc512x/cpu_init.c index fa753c8..69ec871 100644 --- a/cpu/mpc512x/cpu_init.c +++ b/cpu/mpc512x/cpu_init.c @@ -1,6 +1,6 @@ /* * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * (C) Copyright 2007 DENX Software Engineering + * Copyright (C) 2007-2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -26,6 +26,8 @@ #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -46,30 +48,34 @@ void cpu_init_f (volatile immap_t * im) #ifdef CONFIG_SYS_ACR_PIPE_DEP /* Arbiter pipeline depth */ - im->arbiter.acr = (im->arbiter.acr & ~ACR_PIPE_DEP) | - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT); + out_be32(&im->arbiter.acr, + (im->arbiter.acr & ~ACR_PIPE_DEP) | + (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) + ); #endif #ifdef CONFIG_SYS_ACR_RPTCNT /* Arbiter repeat count */ - im->arbiter.acr = ((im->arbiter.acr & ~(ACR_RPTCNT)) | - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT)); + out_be32(im->arbiter.acr, + (im->arbiter.acr & ~(ACR_RPTCNT)) | + (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) + ); #endif /* RSR - Reset Status Register - clear all status */ gd->reset_status = im->reset.rsr; - im->reset.rsr = ~(RSR_RES); + out_be32(&im->reset.rsr, ~RSR_RES); /* * RMR - Reset Mode Register - enable checkstop reset */ - im->reset.rmr = (RMR_CSRE & (1 << RMR_CSRE_SHIFT)); + out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT)); /* Set IPS-CSB divider: IPS = 1/2 CSB */ - ips_div = im->clk.scfr[0]; + ips_div = in_be32(&im->clk.scfr[0]); ips_div &= ~(SCFR1_IPS_DIV_MASK); ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT; - im->clk.scfr[0] = ips_div; + out_be32(&im->clk.scfr[0], ips_div); /* * Enable Time Base/Decrementer @@ -78,7 +84,7 @@ void cpu_init_f (volatile immap_t * im) * have udelay() working; if not enabled, usually leads to a hang, like * during FLASH chip identification etc. */ - im->sysconf.spcr |= SPCR_TBEN; + setbits_be32(&im->sysconf.spcr, SPCR_TBEN); } int cpu_init_r (void) diff --git a/cpu/mpc512x/i2c.c b/cpu/mpc512x/i2c.c index 0da906a..4a3f9a0 100644 --- a/cpu/mpc512x/i2c.c +++ b/cpu/mpc512x/i2c.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2003 - 2007 + * (C) Copyright 2003 - 2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -24,6 +24,7 @@ */ #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -32,8 +33,6 @@ DECLARE_GLOBAL_DATA_PTR; #include #include -#define immr ((immap_t *)CONFIG_SYS_IMMR) - /* by default set I2C bus 0 active */ static unsigned int bus_num = 0; @@ -56,29 +55,24 @@ static int mpc_get_fdr(int); static int mpc_reg_in (volatile u32 *reg) { - int ret = *reg >> 24; - __asm__ __volatile__ ("eieio"); + int ret = in_be32(reg) >> 24; + return ret; } static void mpc_reg_out (volatile u32 *reg, int val, int mask) { - int tmp; - if (!mask) { - *reg = val << 24; + out_be32(reg, val << 24); } else { - tmp = mpc_reg_in (reg); - *reg = ((tmp & ~mask) | (val & mask)) << 24; + clrsetbits_be32(reg, mask << 24, (val & mask) << 24); } - __asm__ __volatile__ ("eieio"); - - return; } static int wait_for_bb (void) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int timeout = I2C_TIMEOUT; int status; @@ -101,7 +95,8 @@ static int wait_for_bb (void) static int wait_for_pin (int *status) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int timeout = I2C_TIMEOUT; *status = mpc_reg_in (®s->msr); @@ -122,7 +117,8 @@ static int wait_for_pin (int *status) static int do_address (uchar chip, char rdwr_flag) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int status; chip <<= 1; @@ -147,7 +143,8 @@ static int do_address (uchar chip, char rdwr_flag) static int send_bytes (uchar chip, char *buf, int len) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int wrcount; int status; @@ -170,7 +167,8 @@ static int send_bytes (uchar chip, char *buf, int len) static int receive_bytes (uchar chip, char *buf, int len) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int dummy = 1; int rdcount = 0; int status; @@ -208,9 +206,12 @@ static int receive_bytes (uchar chip, char *buf, int len) void i2c_init (int speed, int saddr) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; int i; - for(i = 0; i < I2C_BUS_CNT; i++){ - i2c512x_dev_t *regs = &immr->i2c.dev[i]; + + for (i = 0; i < I2C_BUS_CNT; i++){ + volatile i2c512x_dev_t *regs = &im->i2c.dev[i]; + mpc_reg_out (®s->mcr, 0, 0); /* Set clock */ @@ -223,10 +224,10 @@ void i2c_init (int speed, int saddr) } /* Disable interrupts */ - immr->i2c.icr = 0; + out_be32(&im->i2c.icr, 0); + /* Turn off filters */ - immr->i2c.mifr = 0; - return; + out_be32(&im->i2c.mifr, 0); } static int mpc_get_fdr (int speed) @@ -281,7 +282,8 @@ static int mpc_get_fdr (int speed) int i2c_probe (uchar chip) { - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; int i; for (i = 0; i < I2C_RETRIES; i++) { @@ -302,8 +304,9 @@ int i2c_probe (uchar chip) int i2c_read (uchar chip, uint addr, int alen, uchar *buf, int len) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; char xaddr[4]; - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; int ret = -1; xaddr[0] = (addr >> 24) & 0xFF; @@ -346,8 +349,9 @@ Done: int i2c_write (uchar chip, uint addr, int alen, uchar *buf, int len) { + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + volatile i2c512x_dev_t *regs = &im->i2c.dev[bus_num]; char xaddr[4]; - i2c512x_dev_t *regs = &immr->i2c.dev[bus_num]; int ret = -1; xaddr[0] = (addr >> 24) & 0xFF; diff --git a/cpu/mpc512x/ide.c b/cpu/mpc512x/ide.c index 16f1a01..dd6b2f4 100644 --- a/cpu/mpc512x/ide.c +++ b/cpu/mpc512x/ide.c @@ -23,47 +23,46 @@ #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; #if defined(CONFIG_IDE_RESET) +void ide_set_reset (int idereset) +{ + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; + debug ("ide_set_reset(%d)\n", idereset); + + if (idereset) { + out_be32(&im->pata.pata_ata_control, 0); + } else { + out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B); + } + udelay(100); +} + void init_ide_reset (void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; debug ("init_ide_reset\n"); /* * Clear the reset bit to reset the interface * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus */ - immr->pata.pata_ata_control = 0; - udelay(100); - /* Assert the reset bit to enable the interface */ - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; - udelay(100); -} + ide_set_reset(1); -void ide_set_reset (int idereset) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - debug ("ide_set_reset(%d)\n", idereset); + /* Assert the reset bit to enable the interface */ + ide_set_reset(0); - if (idereset) { - immr->pata.pata_ata_control = 0; - udelay(100); - } else { - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; - udelay(100); - } } #define CALC_TIMING(t) (t + period - 1) / period int ide_preinit (void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; long t; const struct { short t0; @@ -92,13 +91,13 @@ int ide_preinit (void) u8 field3; u8 field4; }bytes; - }cfg; + } cfg; debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n", - (u32)&immr->pata); + (u32)&im->pata); /* Set the reset bit to 1 to enable the interface */ - immr->pata.pata_ata_control = FSL_ATA_CTRL_ATA_RST_B; + ide_set_reset(0); /* Init timings : we use PIO mode 0 timings */ t = 1000000000 / gd->ips_clk; /* period in ns */ @@ -107,19 +106,20 @@ int ide_preinit (void) cfg.bytes.field3 = (pio_specs.t1 + t) / t; cfg.bytes.field4 = (pio_specs.t2_8 + t) / t; - immr->pata.pata_time1 = cfg.config; + out_be32(&im->pata.pata_time1, cfg.config); cfg.bytes.field1 = (pio_specs.t2_8 + t) / t; cfg.bytes.field2 = (pio_specs.tA + t) / t + 2; cfg.bytes.field3 = 1; cfg.bytes.field4 = (pio_specs.t4 + t) / t; - immr->pata.pata_time2 = cfg.config; + out_be32(&im->pata.pata_time2, cfg.config); - cfg.config = immr->pata.pata_time3; + cfg.config = in_be32(&im->pata.pata_time3); cfg.bytes.field1 = (pio_specs.t9 + t) / t; - immr->pata.pata_time3 = cfg.config; + out_be32(&im->pata.pata_time3, cfg.config); + debug ("PATA preinit complete.\n"); return 0; diff --git a/cpu/mpc512x/iopin.c b/cpu/mpc512x/iopin.c index befa586..be20947 100644 --- a/cpu/mpc512x/iopin.c +++ b/cpu/mpc512x/iopin.c @@ -23,7 +23,7 @@ #include #include -#include +#include void iopin_initialize(iopin_t *ioregs_init, int len) { @@ -40,9 +40,9 @@ void iopin_initialize(iopin_t *ioregs_init, int len) for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); p < ioregs_init[i].nr_pins; p++, j++) { if (ioregs_init[i].bit_or) - reg[j] |= ioregs_init[i].val; + setbits_be32(reg + j, ioregs_init[i].val); else - reg[j] = ioregs_init[i].val; + out_be32 (reg + j, ioregs_init[i].val); } } return; diff --git a/cpu/mpc512x/pci.c b/cpu/mpc512x/pci.c index 3c63592..166a993 100644 --- a/cpu/mpc512x/pci.c +++ b/cpu/mpc512x/pci.c @@ -1,5 +1,6 @@ /* * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. All rights reserved. + * Copyright (C) 2009 DENX Software Engineering * * See file CREDITS for list of people who contributed to this * project. @@ -22,6 +23,7 @@ #include +#include #include #include #include @@ -46,7 +48,7 @@ static struct pci_controller pci_hose; void pci_init_board(void) { - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; + volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile law512x_t *pci_law; volatile pot512x_t *pci_pot; volatile pcictrl512x_t *pci_ctrl; @@ -58,24 +60,29 @@ pci_init_board(void) struct pci_controller *hose; /* Set PCI divider for 33MHz */ - reg32 = immr->clk.scfr[0]; + reg32 = im->clk.scfr[0]; reg32 &= ~(SCFR1_PCI_DIV_MASK); reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT; - immr->clk.scfr[0] = reg32; + im->clk.scfr[0] = reg32; - pci_law = immr->sysconf.pcilaw; - pci_pot = immr->ios.pot; - pci_ctrl = &immr->pci_ctrl; - pci_conf = &immr->pci_conf; + clrsetbits_be32(&im->clk.scfr[0], + SCFR1_PCI_DIV_MASK, + SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT + ); + + pci_law = im->sysconf.pcilaw; + pci_pot = im->ios.pot; + pci_ctrl = &im->pci_ctrl; + pci_conf = &im->pci_conf; hose = &pci_hose; /* * Release PCI RST Output signal */ - pci_ctrl->gcr = 0; + out_be32(&pci_ctrl->gcr, 0); udelay(2000); - pci_ctrl->gcr = 1; + out_be32(&pci_ctrl->gcr, 1); /* We need to wait at least a 1sec based on PCI specs */ for (i = 0; i < 1000; i++) @@ -84,30 +91,39 @@ pci_init_board(void) /* * Configure PCI Local Access Windows */ - pci_law[0].bar = CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR; - pci_law[0].ar = LAWAR_EN | LAWAR_SIZE_512M; + out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR); + out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M); - pci_law[1].bar = CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR; - pci_law[1].ar = LAWAR_EN | LAWAR_SIZE_16M; + out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR); + out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M); /* * Configure PCI Outbound Translation Windows */ /* PCI mem space - prefetch */ - pci_pot[0].potar = (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK; - pci_pot[0].pobar = (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[0].pocmr = POCMR_EN | POCMR_PRE | POCMR_CM_256M; + out_be32(&pci_pot[0].potar, + (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[0].pobar, + (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[0].pocmr, + POCMR_EN | POCMR_PRE | POCMR_CM_256M); /* PCI IO space */ - pci_pot[1].potar = (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[1].pobar = (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[1].pocmr = POCMR_EN | POCMR_IO | POCMR_CM_16M; + out_be32(&pci_pot[1].potar, + (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[1].pobar, + (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[1].pocmr, + POCMR_EN | POCMR_IO | POCMR_CM_16M); /* PCI mmio - non-prefetch mem space */ - pci_pot[2].potar = (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK; - pci_pot[2].pobar = (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK; - pci_pot[2].pocmr = POCMR_EN | POCMR_CM_256M; + out_be32(&pci_pot[2].potar, + (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK); + out_be32(&pci_pot[2].pobar, + (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK); + out_be32(&pci_pot[2].pocmr, + POCMR_EN | POCMR_CM_256M); /* * Configure PCI Inbound Translation Windows @@ -115,11 +131,12 @@ pci_init_board(void) /* we need RAM mapped to PCI space for the devices to * access main memory */ - pci_ctrl[0].pitar1 = 0x0; - pci_ctrl[0].pibar1 = 0x0; - pci_ctrl[0].piebar1 = 0x0; - pci_ctrl[0].piwar1 = PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1); + out_be32(&pci_ctrl[0].pitar1, 0x0); + out_be32(&pci_ctrl[0].pibar1, 0x0); + out_be32(&pci_ctrl[0].piebar1, 0x0); + out_be32(&pci_ctrl[0].piwar1, + PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | + PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1)); hose->first_busno = 0; hose->last_busno = 0xff; diff --git a/cpu/mpc512x/serial.c b/cpu/mpc512x/serial.c index 7db87a8..16ce770 100644 --- a/cpu/mpc512x/serial.c +++ b/cpu/mpc512x/serial.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000 - 2007 + * (C) Copyright 2000 - 2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * See file CREDITS for list of people who contributed to this @@ -30,6 +30,8 @@ */ #include +#include +#include DECLARE_GLOBAL_DATA_PTR; @@ -40,21 +42,21 @@ static void fifo_init (volatile psc512x_t *psc) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; /* reset Rx & Tx fifo slice */ - psc->rfcmd = PSC_FIFO_RESET_SLICE; - psc->tfcmd = PSC_FIFO_RESET_SLICE; + out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE); + out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE); /* disable Tx & Rx FIFO interrupts */ - psc->rfintmask = 0; - psc->tfintmask = 0; + out_be32(&psc->rfintmask, 0); + out_be32(&psc->tfintmask, 0); - psc->tfsize = CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16); - psc->rfsize = CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16); + out_be32(&psc->tfsize, CONSOLE_FIFO_TX_SIZE | (CONSOLE_FIFO_TX_ADDR << 16)); + out_be32(&psc->rfsize, CONSOLE_FIFO_RX_SIZE | (CONSOLE_FIFO_RX_ADDR << 16)); /* enable Tx & Rx FIFO slice */ - psc->rfcmd = PSC_FIFO_ENABLE_SLICE; - psc->tfcmd = PSC_FIFO_ENABLE_SLICE; + out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE); + out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE); - im->fifoc.fifoc_cmd = FIFOC_DISABLE_CLOCK_GATE; + out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE); __asm__ volatile ("sync"); } @@ -68,38 +70,38 @@ int serial_init(void) fifo_init (psc); /* set MR register to point to MR1 */ - psc->command = PSC_SEL_MODE_REG_1; + out_8(&psc->command, PSC_SEL_MODE_REG_1); /* disable Tx/Rx */ - psc->command = PSC_TX_DISABLE | PSC_RX_DISABLE; + out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE); /* choose the prescaler by 16 for the Tx/Rx clock generation */ - psc->psc_clock_select = 0xdd00; + out_be16(&psc->psc_clock_select, 0xdd00); /* switch to UART mode */ - psc->sicr = 0; + out_be32(&psc->sicr, 0); /* mode register points to mr1 */ /* configure parity, bit length and so on in mode register 1*/ - psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; + out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); /* now, mode register points to mr2 */ - psc->mode = PSC_MODE_1_STOPBIT; + out_8(&psc->mode, PSC_MODE_1_STOPBIT); /* calculate dividor for setting PSC CTUR and CTLR registers */ baseclk = (gd->ips_clk + 8) / 16; div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xff; + out_8(&psc->ctur, (div >> 8) & 0xff); /* set baudrate */ - psc->ctlr = div & 0xff; + out_8(&psc->ctlr, div & 0xff); /* disable all interrupts */ - psc->psc_imr = 0; + out_be16(&psc->psc_imr, 0); /* reset and enable Rx/Tx */ - psc->command = PSC_RST_RX; - psc->command = PSC_RST_TX; - psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; + out_8(&psc->command, PSC_RST_RX); + out_8(&psc->command, PSC_RST_TX); + out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); return 0; } @@ -113,7 +115,7 @@ void serial_putc (const char c) serial_putc ('\r'); /* Wait for last character to go. */ - while (!(psc->psc_status & PSC_SR_TXEMP)) + while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP)) ; psc->tfdata_8 = c; @@ -125,7 +127,7 @@ void serial_putc_raw (const char c) volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; /* Wait for last character to go. */ - while (!(psc->psc_status & PSC_SR_TXEMP)) + while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP)) ; psc->tfdata_8 = c; @@ -145,7 +147,7 @@ int serial_getc (void) volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; /* Wait for a character to arrive. */ - while (psc->rfstat & PSC_FIFO_EMPTY) + while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY) ; return psc->rfdata_8; @@ -156,7 +158,7 @@ int serial_tstc (void) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; - return !(psc->rfstat & PSC_FIFO_EMPTY); + return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY); } void serial_setbrg (void) @@ -168,8 +170,8 @@ void serial_setbrg (void) baseclk = (gd->csb_clk + 8) / 16; div = (baseclk + (gd->baudrate / 2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xFF; - psc->ctlr = div & 0xff; /* set baudrate */ + out_8(&psc->ctur, (div >> 8) & 0xFF); + out_8(&psc->ctlr, div & 0xff); /* set baudrate */ } void serial_setrts(int s) @@ -179,11 +181,11 @@ void serial_setrts(int s) if (s) { /* Assert RTS (become LOW) */ - psc->op1 = 0x1; + out_8(&psc->op1, 0x1); } else { /* Negate RTS (become HIGH) */ - psc->op0 = 0x1; + out_8(&psc->op0, 0x1); } } @@ -192,6 +194,6 @@ int serial_getcts(void) volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; volatile psc512x_t *psc = (psc512x_t *) &im->psc[CONFIG_PSC_CONSOLE]; - return (psc->ip & 0x1) ? 0 : 1; + return (in_8(&psc->ip) & 0x1) ? 0 : 1; } #endif /* CONFIG_PSC_CONSOLE */ diff --git a/cpu/mpc512x/speed.c b/cpu/mpc512x/speed.c index 1f90862..0fec004 100644 --- a/cpu/mpc512x/speed.c +++ b/cpu/mpc512x/speed.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2000-2007 + * (C) Copyright 2000-2009 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. * * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. @@ -28,6 +28,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -75,29 +76,37 @@ int get_clocks (void) u32 csb_clk; u32 ips_clk; u32 pci_clk; + u32 reg; - if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im) + reg = in_be32(&im->sysconf.immrbar); + if ((reg & IMMRBAR_BASE_ADDR) != (u32) im) return -1; - spmf = (im->clk.spmr & SPMR_SPMF) >> SPMR_SPMF_SHIFT; + reg = in_be32(&im->clk.spmr); + spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT; spll = ref_clk * spmf_mult[spmf]; - sys_div = (im->clk.scfr[1] & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; + reg = in_be32(&im->clk.scfr[1]); + sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0]; csb_clk = sys_clk / 2; - cpmf = (im->clk.spmr & SPMR_CPMF) >> SPMR_CPMF_SHIFT; + reg = in_be32(&im->clk.spmr); + cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT; core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1]; - ips_div = (im->clk.scfr[0] & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; + reg = in_be32(&im->clk.scfr[0]); + ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; if (ips_div != 0) { ips_clk = csb_clk / ips_div; } else { /* in case we cannot get a sane IPS divisor, fail gracefully */ ips_clk = 0; } - pci_div = (im->clk.scfr[0] & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT; + + reg = in_be32(&im->clk.scfr[0]); + pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT; if (pci_div != 0) { pci_clk = csb_clk / pci_div; } else { -- cgit v1.1