From 83ec20bc4380eebddfde45da6e3a69a92d4db21d Mon Sep 17 00:00:00 2001 From: TsiChungLiew Date: Wed, 15 Aug 2007 19:21:21 -0500 Subject: ColdFire: MCF52x2 update Signed-off-by: TsiChungLiew --- cpu/mcf52x2/fec.c | 605 ------------------------------------------------------ 1 file changed, 605 deletions(-) delete mode 100644 cpu/mcf52x2/fec.c (limited to 'cpu/mcf52x2/fec.c') diff --git a/cpu/mcf52x2/fec.c b/cpu/mcf52x2/fec.c deleted file mode 100644 index ef9c798..0000000 --- a/cpu/mcf52x2/fec.c +++ /dev/null @@ -1,605 +0,0 @@ -/* - * (C) Copyright 2000-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include - -#ifdef CONFIG_M5271 -#include -#include -#endif - -#ifdef CONFIG_M5272 -#include -#include -#endif - -#ifdef CONFIG_M5282 -#include -#include -#endif - -#include -#include - -#ifdef CONFIG_M5272 -#define FEC_ADDR (CFG_MBAR + 0x840) -#endif -#if defined(CONFIG_M5282) || defined(CONFIG_M5271) -#define FEC_ADDR (CFG_MBAR + 0x1000) -#endif - -#undef ET_DEBUG -#undef MII_DEBUG - -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) - -#ifdef CFG_DISCOVER_PHY -#include -static void mii_discover_phy (void); -#endif - -/* Ethernet Transmit and Receive Buffers */ -#define DBUF_LENGTH 1520 - -#define TX_BUF_CNT 2 - -#define TOUT_LOOP 100 - -#define PKT_MAXBUF_SIZE 1518 -#define PKT_MINBUF_SIZE 64 -#define PKT_MAXBLR_SIZE 1520 - - -static char txbuf[DBUF_LENGTH]; - -static uint rxIdx; /* index of the current RX buffer */ -static uint txIdx; /* index of the current TX buffer */ - -/* - * FEC Ethernet Tx and Rx buffer descriptors allocated at the - * immr->udata_bd address on Dual-Port RAM - * Provide for Double Buffering - */ - -typedef volatile struct CommonBufferDescriptor { - cbd_t rxbd[PKTBUFSRX]; /* Rx BD */ - cbd_t txbd[TX_BUF_CNT]; /* Tx BD */ -} RTXBD; - -static RTXBD *rtx = NULL; - -int eth_send (volatile void *packet, int length) -{ - int j, rc; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* section 16.9.23.3 - * Wait for ready - */ - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX not ready\n"); - } - - rtx->txbd[txIdx].cbd_bufaddr = (uint) packet; - rtx->txbd[txIdx].cbd_datlen = length; - rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST; - - /* Activate transmit Buffer Descriptor polling */ - fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */ - - j = 0; - while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) - && (j < TOUT_LOOP)) { - udelay (1); - j++; - } - if (j >= TOUT_LOOP) { - printf ("TX timeout\n"); - } -#ifdef ET_DEBUG - printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n", - __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc, - (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2); -#endif - - /* return only status bits */ ; - rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS); - - txIdx = (txIdx + 1) % TX_BUF_CNT; - - return rc; -} - -int eth_rx (void) -{ - int length; - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - for (;;) { - /* section 16.9.23.2 */ - if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) { - length = -1; - break; /* nothing received - leave for() loop */ - } - - length = rtx->rxbd[rxIdx].cbd_datlen; - - if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) { -#ifdef ET_DEBUG - printf ("%s[%d] err: %x\n", - __FUNCTION__, __LINE__, - rtx->rxbd[rxIdx].cbd_sc); -#endif - } else { - /* Pass the packet up to the protocol layers. */ - NetReceive (NetRxPackets[rxIdx], length - 4); - } - - /* Give the buffer back to the FEC. */ - rtx->rxbd[rxIdx].cbd_datlen = 0; - - /* wrap around buffer index when necessary */ - if ((rxIdx + 1) >= PKTBUFSRX) { - rtx->rxbd[PKTBUFSRX - 1].cbd_sc = - (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY); - rxIdx = 0; - } else { - rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY; - rxIdx++; - } - - /* Try to fill Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - } - - return length; -} - -/************************************************************** - * - * FEC Ethernet Initialization Routine - * - *************************************************************/ -#define FEC_ECNTRL_ETHER_EN 0x00000002 -#define FEC_ECNTRL_RESET 0x00000001 - -#define FEC_RCNTRL_BC_REJ 0x00000010 -#define FEC_RCNTRL_PROM 0x00000008 -#define FEC_RCNTRL_MII_MODE 0x00000004 -#define FEC_RCNTRL_DRT 0x00000002 -#define FEC_RCNTRL_LOOP 0x00000001 - -#define FEC_TCNTRL_FDEN 0x00000004 -#define FEC_TCNTRL_HBC 0x00000002 -#define FEC_TCNTRL_GTS 0x00000001 - -#define FEC_RESET_DELAY 50000 - -int eth_init (bd_t * bd) -{ -#ifndef CFG_ENET_BD_BASE - DECLARE_GLOBAL_DATA_PTR; -#endif - int i; - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return 0; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt */ - fecp->fec_ievent = 0xffffffff; - - /* Set station address */ -#define ea bd->bi_enetaddr - fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) | - (ea[2] << 8) | (ea[3]); - fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16); -#ifdef ET_DEBUG - printf ("Eth Addrs: %02x:%02x:%02x:%02x:%02x:%02x\n", - ea[0], ea[1], ea[2], ea[3], ea[4], ea[5]); -#endif -#undef ea - -#ifdef CONFIG_M5271 - /* Clear multicast address hash table - */ - fecp->fec_ghash_table_high = 0; - fecp->fec_ghash_table_low = 0; - - /* Clear individual address hash table - */ - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - /* Clear multicast address hash table - */ -#ifdef CONFIG_M5282 - fecp->fec_ihash_table_high = 0; - fecp->fec_ihash_table_low = 0; -#else - fecp->fec_hash_table_high = 0; - fecp->fec_hash_table_low = 0; -#endif -#endif - - /* Set maximum receive buffer size. - */ - fecp->fec_r_buff_size = PKT_MAXBLR_SIZE; - - /* - * Setup Buffers and Buffer Desriptors - */ - rxIdx = 0; - txIdx = 0; - - if (!rtx) { -#ifdef CFG_ENET_BD_BASE - rtx = (RTXBD *) CFG_ENET_BD_BASE; -#else - rtx = (RTXBD *) (CFG_MONITOR_BASE+gd->reloc_off - - (((PKTBUFSRX+TX_BUF_CNT)*+sizeof(cbd_t) - +0xFF) - & ~0xFF) - ); - debug("set ENET_DB_BASE to %lX\n",(long) rtx); -#endif - } - - /* - * Setup Receiver Buffer Descriptors (13.14.24.18) - * Settings: - * Empty, Wrap - */ - for (i = 0; i < PKTBUFSRX; i++) { - rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY; - rtx->rxbd[i].cbd_datlen = 0; /* Reset */ - rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i]; - } - rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP; - - /* - * Setup Ethernet Transmitter Buffer Descriptors (13.14.24.19) - * Settings: - * Last, Tx CRC - */ - for (i = 0; i < TX_BUF_CNT; i++) { - rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC; - rtx->txbd[i].cbd_datlen = 0; /* Reset */ - rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]); - } - rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP; - - /* Set receive and transmit descriptor base - */ - fecp->fec_r_des_start = (unsigned int) (&rtx->rxbd[0]); - fecp->fec_x_des_start = (unsigned int) (&rtx->txbd[0]); - - /* Enable MII mode - */ - -#if 0 /* Full duplex mode */ - fecp->fec_r_cntrl = FEC_RCNTRL_MII_MODE; - fecp->fec_x_cntrl = FEC_TCNTRL_FDEN; -#else /* Half duplex mode */ - fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16); /* set max frame length */ - fecp->fec_r_cntrl |= FEC_RCNTRL_MII_MODE | FEC_RCNTRL_DRT; - fecp->fec_x_cntrl = 0; -#endif - /* Set MII speed */ - fecp->fec_mii_speed = (((CFG_CLK / 2) / (2500000 / 10)) + 5) / 10; - fecp->fec_mii_speed *= 2; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing - */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - -#ifdef CFG_DISCOVER_PHY - /* wait for the PHY to wake up after reset */ - mii_discover_phy (); -#endif - - /* And last, try to fill Rx Buffer Descriptors */ - fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */ - - return 1; -} - -void eth_halt (void) -{ - volatile fec_t *fecp = (fec_t *) FEC_ADDR; - - fecp->fec_ecntrl = 0; -} - - -#if defined(CFG_DISCOVER_PHY) || defined(CONFIG_CMD_MII) - -static int phyaddr = -1; /* didn't find a PHY yet */ -static uint phytype; - -/* Make MII read/write commands for the FEC. -*/ - -#define mk_mii_read(ADDR, REG) (0x60020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18)) - -#define mk_mii_write(ADDR, REG, VAL) (0x50020000 | ((ADDR << 23) | \ - (REG & 0x1f) << 18) | \ - (VAL & 0xffff)) - -/* Interrupt events/masks. -*/ -#define FEC_ENET_HBERR ((uint)0x80000000) /* Heartbeat error */ -#define FEC_ENET_BABR ((uint)0x40000000) /* Babbling receiver */ -#define FEC_ENET_BABT ((uint)0x20000000) /* Babbling transmitter */ -#define FEC_ENET_GRA ((uint)0x10000000) /* Graceful stop complete */ -#define FEC_ENET_TXF ((uint)0x08000000) /* Full frame transmitted */ -#define FEC_ENET_TXB ((uint)0x04000000) /* A buffer was transmitted */ -#define FEC_ENET_RXF ((uint)0x02000000) /* Full frame received */ -#define FEC_ENET_RXB ((uint)0x01000000) /* A buffer was received */ -#define FEC_ENET_MII ((uint)0x00800000) /* MII interrupt */ -#define FEC_ENET_EBERR ((uint)0x00400000) /* SDMA bus error */ - -/* PHY identification - */ -#define PHY_ID_LXT970 0x78100000 /* LXT970 */ -#define PHY_ID_LXT971 0x001378e0 /* LXT971 and 972 */ -#define PHY_ID_82555 0x02a80150 /* Intel 82555 */ -#define PHY_ID_QS6612 0x01814400 /* QS6612 */ -#define PHY_ID_AMD79C784 0x00225610 /* AMD 79C784 */ -#define PHY_ID_LSI80225 0x0016f870 /* LSI 80225 */ -#define PHY_ID_LSI80225B 0x0016f880 /* LSI 80225/B */ - -/* send command to phy using mii, wait for result */ -static uint mii_send (uint mii_cmd) -{ - uint mii_reply; - volatile fec_t *ep = (fec_t *) (FEC_ADDR); - - ep->fec_mii_data = mii_cmd; /* command to phy */ - - /* wait for mii complete */ - while (!(ep->fec_ievent & FEC_ENET_MII)); /* spin until done */ - mii_reply = ep->fec_mii_data; /* result from phy */ - ep->fec_ievent = FEC_ENET_MII; /* clear MII complete */ -#ifdef ET_DEBUG - printf ("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n", - __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply); -#endif - return (mii_reply & 0xffff); /* data read from phy */ -} -#endif - -#if defined(CFG_DISCOVER_PHY) -static void mii_discover_phy (void) -{ -#define MAX_PHY_PASSES 11 - uint phyno; - int pass; - - phyaddr = -1; /* didn't find a PHY yet */ - for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) { - if (pass > 1) { - /* PHY may need more time to recover from reset. - * The LXT970 needs 50ms typical, no maximum is - * specified, so wait 10ms before try again. - * With 11 passes this gives it 100ms to wake up. - */ - udelay (10000); /* wait 10ms */ - } - for (phyno = 1; phyno < 32 && phyaddr < 0; ++phyno) { - phytype = mii_send (mk_mii_read (phyno, PHY_PHYIDR1)); -#ifdef ET_DEBUG - printf ("PHY type 0x%x pass %d type ", phytype, pass); -#endif - if (phytype != 0xffff) { - phyaddr = phyno; - phytype <<= 16; - phytype |= mii_send (mk_mii_read (phyno, - PHY_PHYIDR2)); - -#ifdef ET_DEBUG - printf ("PHY @ 0x%x pass %d type ", phyno, - pass); - switch (phytype & 0xfffffff0) { - case PHY_ID_LXT970: - printf ("LXT970\n"); - break; - case PHY_ID_LXT971: - printf ("LXT971\n"); - break; - case PHY_ID_82555: - printf ("82555\n"); - break; - case PHY_ID_QS6612: - printf ("QS6612\n"); - break; - case PHY_ID_AMD79C784: - printf ("AMD79C784\n"); - break; - case PHY_ID_LSI80225B: - printf ("LSI L80225/B\n"); - break; - default: - printf ("0x%08x\n", phytype); - break; - } -#endif - } - } - } - if (phyaddr < 0) { - printf ("No PHY device found.\n"); - } -} -#endif /* CFG_DISCOVER_PHY */ - -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - -static int mii_init_done = 0; - -/**************************************************************************** - * mii_init -- Initialize the MII for MII command without ethernet - * This function is a subset of eth_init - **************************************************************************** - */ -void mii_init (void) -{ - volatile fec_t *fecp = (fec_t *) (FEC_ADDR); - - int i; - - if (mii_init_done != 0) { - return; - } - - /* Whack a reset. - * A delay is required between a reset of the FEC block and - * initialization of other FEC registers because the reset takes - * some time to complete. If you don't delay, subsequent writes - * to FEC registers might get killed by the reset routine which is - * still in progress. - */ - - fecp->fec_ecntrl = FEC_ECNTRL_RESET; - for (i = 0; - (fecp->fec_ecntrl & FEC_ECNTRL_RESET) && (i < FEC_RESET_DELAY); - ++i) { - udelay (1); - } - if (i == FEC_RESET_DELAY) { - printf ("FEC_RESET_DELAY timeout\n"); - return; - } - - /* We use strictly polling mode only - */ - fecp->fec_imask = 0; - - /* Clear any pending interrupt - */ - fecp->fec_ievent = 0xffffffff; - - /* Set MII speed */ - fecp->fec_mii_speed = 0x0e; - - /* Configure port B for MII. - */ - /* port initialization was already made in cpu_init_f() */ - - /* Now enable the transmit and receive processing */ - fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN; - - mii_init_done = 1; -} - -/***************************************************************************** - * Read and write a MII PHY register, routines used by MII Utilities - * - * FIXME: These routines are expected to return 0 on success, but mii_send - * does _not_ return an error code. Maybe 0xFFFF means error, i.e. - * no PHY connected... - * For now always return 0. - * FIXME: These routines only work after calling eth_init() at least once! - * Otherwise they hang in mii_send() !!! Sorry! - *****************************************************************************/ - -int mcf52x2_miiphy_read (char *devname, unsigned char addr, - unsigned char reg, unsigned short *value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_read(0x%x) @ 0x%x = ", reg, addr); -#endif - rdreg = mii_send (mk_mii_read (addr, reg)); - - *value = rdreg; - -#ifdef MII_DEBUG - printf ("0x%04x\n", *value); -#endif - - return 0; -} - -int mcf52x2_miiphy_write (char *devname, unsigned char addr, - unsigned char reg, unsigned short value) -{ - short rdreg; /* register working value */ - -#ifdef MII_DEBUG - printf ("miiphy_write(0x%x) @ 0x%x = ", reg, addr); -#endif - - rdreg = mii_send (mk_mii_write (addr, reg, value)); - -#ifdef MII_DEBUG - printf ("0x%04x\n", value); -#endif - - return 0; -} -#endif -#endif - -int mcf52x2_miiphy_initialize(bd_t *bis) -{ -#if defined(CONFIG_CMD_NET) && defined(FEC_ENET) -#if defined(CONFIG_CMD_MII) && !defined(CONFIG_BITBANGMII) - miiphy_register("mcf52x2phy", mcf52x2_miiphy_read, mcf52x2_miiphy_write); -#endif -#endif - return 0; -} -- cgit v1.1