From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- cpu/mcf52x2/cpu_init.c | 356 ++++++++++++++++++++++++------------------------- 1 file changed, 178 insertions(+), 178 deletions(-) (limited to 'cpu/mcf52x2/cpu_init.c') diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c index 68aefe9..7bb358e 100644 --- a/cpu/mcf52x2/cpu_init.c +++ b/cpu/mcf52x2/cpu_init.c @@ -72,20 +72,20 @@ void cpu_init_f(void) * Setup chip selects... */ - mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); - mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); #ifdef CONFIG_FSL_I2C - CFG_I2C_PINMUX_REG = CFG_I2C_PINMUX_REG & CFG_I2C_PINMUX_CLR; - CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; -#ifdef CFG_I2C2_OFFSET - CFG_I2C2_PINMUX_REG &= CFG_I2C2_PINMUX_CLR; - CFG_I2C2_PINMUX_REG |= CFG_I2C2_PINMUX_SET; + CONFIG_SYS_I2C_PINMUX_REG = CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR; + CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; +#ifdef CONFIG_SYS_I2C2_OFFSET + CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR; + CONFIG_SYS_I2C2_PINMUX_REG |= CONFIG_SYS_I2C2_PINMUX_SET; #endif #endif @@ -102,7 +102,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: break; case 1: @@ -138,7 +138,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: mbar_writeShort(MCF_GPIO_PAR_UART, MCF_GPIO_PAR_UART_U0TXD | MCF_GPIO_PAR_UART_U0RXD); @@ -169,59 +169,59 @@ void cpu_init_f(void) * already initialized. */ #ifndef CONFIG_MONITOR_IS_IN_RAM - volatile sysctrl_t *sysctrl = (sysctrl_t *) (CFG_MBAR); + volatile sysctrl_t *sysctrl = (sysctrl_t *) (CONFIG_SYS_MBAR); volatile gpio_t *gpio = (gpio_t *) (MMAP_GPIO); volatile csctrl_t *csctrl = (csctrl_t *) (MMAP_FBCS); - sysctrl->sc_scr = CFG_SCR; - sysctrl->sc_spr = CFG_SPR; + sysctrl->sc_scr = CONFIG_SYS_SCR; + sysctrl->sc_spr = CONFIG_SYS_SPR; /* Setup Ports: */ - gpio->gpio_pacnt = CFG_PACNT; - gpio->gpio_paddr = CFG_PADDR; - gpio->gpio_padat = CFG_PADAT; - gpio->gpio_pbcnt = CFG_PBCNT; - gpio->gpio_pbddr = CFG_PBDDR; - gpio->gpio_pbdat = CFG_PBDAT; - gpio->gpio_pdcnt = CFG_PDCNT; + gpio->gpio_pacnt = CONFIG_SYS_PACNT; + gpio->gpio_paddr = CONFIG_SYS_PADDR; + gpio->gpio_padat = CONFIG_SYS_PADAT; + gpio->gpio_pbcnt = CONFIG_SYS_PBCNT; + gpio->gpio_pbddr = CONFIG_SYS_PBDDR; + gpio->gpio_pbdat = CONFIG_SYS_PBDAT; + gpio->gpio_pdcnt = CONFIG_SYS_PDCNT; /* Memory Controller: */ - csctrl->cs_br0 = CFG_BR0_PRELIM; - csctrl->cs_or0 = CFG_OR0_PRELIM; + csctrl->cs_br0 = CONFIG_SYS_BR0_PRELIM; + csctrl->cs_or0 = CONFIG_SYS_OR0_PRELIM; -#if (defined(CFG_OR1_PRELIM) && defined(CFG_BR1_PRELIM)) - csctrl->cs_br1 = CFG_BR1_PRELIM; - csctrl->cs_or1 = CFG_OR1_PRELIM; +#if (defined(CONFIG_SYS_OR1_PRELIM) && defined(CONFIG_SYS_BR1_PRELIM)) + csctrl->cs_br1 = CONFIG_SYS_BR1_PRELIM; + csctrl->cs_or1 = CONFIG_SYS_OR1_PRELIM; #endif -#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM) - csctrl->cs_br2 = CFG_BR2_PRELIM; - csctrl->cs_or2 = CFG_OR2_PRELIM; +#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM) + csctrl->cs_br2 = CONFIG_SYS_BR2_PRELIM; + csctrl->cs_or2 = CONFIG_SYS_OR2_PRELIM; #endif -#if defined(CFG_OR3_PRELIM) && defined(CFG_BR3_PRELIM) - csctrl->cs_br3 = CFG_BR3_PRELIM; - csctrl->cs_or3 = CFG_OR3_PRELIM; +#if defined(CONFIG_SYS_OR3_PRELIM) && defined(CONFIG_SYS_BR3_PRELIM) + csctrl->cs_br3 = CONFIG_SYS_BR3_PRELIM; + csctrl->cs_or3 = CONFIG_SYS_OR3_PRELIM; #endif -#if defined(CFG_OR4_PRELIM) && defined(CFG_BR4_PRELIM) - csctrl->cs_br4 = CFG_BR4_PRELIM; - csctrl->cs_or4 = CFG_OR4_PRELIM; +#if defined(CONFIG_SYS_OR4_PRELIM) && defined(CONFIG_SYS_BR4_PRELIM) + csctrl->cs_br4 = CONFIG_SYS_BR4_PRELIM; + csctrl->cs_or4 = CONFIG_SYS_OR4_PRELIM; #endif -#if defined(CFG_OR5_PRELIM) && defined(CFG_BR5_PRELIM) - csctrl->cs_br5 = CFG_BR5_PRELIM; - csctrl->cs_or5 = CFG_OR5_PRELIM; +#if defined(CONFIG_SYS_OR5_PRELIM) && defined(CONFIG_SYS_BR5_PRELIM) + csctrl->cs_br5 = CONFIG_SYS_BR5_PRELIM; + csctrl->cs_or5 = CONFIG_SYS_OR5_PRELIM; #endif -#if defined(CFG_OR6_PRELIM) && defined(CFG_BR6_PRELIM) - csctrl->cs_br6 = CFG_BR6_PRELIM; - csctrl->cs_or6 = CFG_OR6_PRELIM; +#if defined(CONFIG_SYS_OR6_PRELIM) && defined(CONFIG_SYS_BR6_PRELIM) + csctrl->cs_br6 = CONFIG_SYS_BR6_PRELIM; + csctrl->cs_or6 = CONFIG_SYS_OR6_PRELIM; #endif -#if defined(CFG_OR7_PRELIM) && defined(CFG_BR7_PRELIM) - csctrl->cs_br7 = CFG_BR7_PRELIM; - csctrl->cs_or7 = CFG_OR7_PRELIM; +#if defined(CONFIG_SYS_OR7_PRELIM) && defined(CONFIG_SYS_BR7_PRELIM) + csctrl->cs_br7 = CONFIG_SYS_BR7_PRELIM; + csctrl->cs_or7 = CONFIG_SYS_OR7_PRELIM; #endif #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ @@ -244,7 +244,7 @@ void uart_port_conf(void) volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO; /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: gpio->gpio_pbcnt &= ~(GPIO_PBCNT_PB0MSK | GPIO_PBCNT_PB1MSK); gpio->gpio_pbcnt |= (GPIO_PBCNT_URT0_TXD | GPIO_PBCNT_URT0_RXD); @@ -282,57 +282,57 @@ void cpu_init_f(void) /* Memory Controller: */ /* Flash */ - csctrl_reg->ar0 = CFG_AR0_PRELIM; - csctrl_reg->cr0 = CFG_CR0_PRELIM; - csctrl_reg->mr0 = CFG_MR0_PRELIM; + csctrl_reg->ar0 = CONFIG_SYS_AR0_PRELIM; + csctrl_reg->cr0 = CONFIG_SYS_CR0_PRELIM; + csctrl_reg->mr0 = CONFIG_SYS_MR0_PRELIM; -#if (defined(CFG_AR1_PRELIM) && defined(CFG_CR1_PRELIM) && defined(CFG_MR1_PRELIM)) - csctrl_reg->ar1 = CFG_AR1_PRELIM; - csctrl_reg->cr1 = CFG_CR1_PRELIM; - csctrl_reg->mr1 = CFG_MR1_PRELIM; +#if (defined(CONFIG_SYS_AR1_PRELIM) && defined(CONFIG_SYS_CR1_PRELIM) && defined(CONFIG_SYS_MR1_PRELIM)) + csctrl_reg->ar1 = CONFIG_SYS_AR1_PRELIM; + csctrl_reg->cr1 = CONFIG_SYS_CR1_PRELIM; + csctrl_reg->mr1 = CONFIG_SYS_MR1_PRELIM; #endif -#if (defined(CFG_AR2_PRELIM) && defined(CFG_CR2_PRELIM) && defined(CFG_MR2_PRELIM)) - csctrl_reg->ar2 = CFG_AR2_PRELIM; - csctrl_reg->cr2 = CFG_CR2_PRELIM; - csctrl_reg->mr2 = CFG_MR2_PRELIM; +#if (defined(CONFIG_SYS_AR2_PRELIM) && defined(CONFIG_SYS_CR2_PRELIM) && defined(CONFIG_SYS_MR2_PRELIM)) + csctrl_reg->ar2 = CONFIG_SYS_AR2_PRELIM; + csctrl_reg->cr2 = CONFIG_SYS_CR2_PRELIM; + csctrl_reg->mr2 = CONFIG_SYS_MR2_PRELIM; #endif -#if (defined(CFG_AR3_PRELIM) && defined(CFG_CR3_PRELIM) && defined(CFG_MR3_PRELIM)) - csctrl_reg->ar3 = CFG_AR3_PRELIM; - csctrl_reg->cr3 = CFG_CR3_PRELIM; - csctrl_reg->mr3 = CFG_MR3_PRELIM; +#if (defined(CONFIG_SYS_AR3_PRELIM) && defined(CONFIG_SYS_CR3_PRELIM) && defined(CONFIG_SYS_MR3_PRELIM)) + csctrl_reg->ar3 = CONFIG_SYS_AR3_PRELIM; + csctrl_reg->cr3 = CONFIG_SYS_CR3_PRELIM; + csctrl_reg->mr3 = CONFIG_SYS_MR3_PRELIM; #endif -#if (defined(CFG_AR4_PRELIM) && defined(CFG_CR4_PRELIM) && defined(CFG_MR4_PRELIM)) - csctrl_reg->ar4 = CFG_AR4_PRELIM; - csctrl_reg->cr4 = CFG_CR4_PRELIM; - csctrl_reg->mr4 = CFG_MR4_PRELIM; +#if (defined(CONFIG_SYS_AR4_PRELIM) && defined(CONFIG_SYS_CR4_PRELIM) && defined(CONFIG_SYS_MR4_PRELIM)) + csctrl_reg->ar4 = CONFIG_SYS_AR4_PRELIM; + csctrl_reg->cr4 = CONFIG_SYS_CR4_PRELIM; + csctrl_reg->mr4 = CONFIG_SYS_MR4_PRELIM; #endif -#if (defined(CFG_AR5_PRELIM) && defined(CFG_CR5_PRELIM) && defined(CFG_MR5_PRELIM)) - csctrl_reg->ar5 = CFG_AR5_PRELIM; - csctrl_reg->cr5 = CFG_CR5_PRELIM; - csctrl_reg->mr5 = CFG_MR5_PRELIM; +#if (defined(CONFIG_SYS_AR5_PRELIM) && defined(CONFIG_SYS_CR5_PRELIM) && defined(CONFIG_SYS_MR5_PRELIM)) + csctrl_reg->ar5 = CONFIG_SYS_AR5_PRELIM; + csctrl_reg->cr5 = CONFIG_SYS_CR5_PRELIM; + csctrl_reg->mr5 = CONFIG_SYS_MR5_PRELIM; #endif -#if (defined(CFG_AR6_PRELIM) && defined(CFG_CR6_PRELIM) && defined(CFG_MR6_PRELIM)) - csctrl_reg->ar6 = CFG_AR6_PRELIM; - csctrl_reg->cr6 = CFG_CR6_PRELIM; - csctrl_reg->mr6 = CFG_MR6_PRELIM; +#if (defined(CONFIG_SYS_AR6_PRELIM) && defined(CONFIG_SYS_CR6_PRELIM) && defined(CONFIG_SYS_MR6_PRELIM)) + csctrl_reg->ar6 = CONFIG_SYS_AR6_PRELIM; + csctrl_reg->cr6 = CONFIG_SYS_CR6_PRELIM; + csctrl_reg->mr6 = CONFIG_SYS_MR6_PRELIM; #endif -#if (defined(CFG_AR7_PRELIM) && defined(CFG_CR7_PRELIM) && defined(CFG_MR7_PRELIM)) - csctrl_reg->ar7 = CFG_AR7_PRELIM; - csctrl_reg->cr7 = CFG_CR7_PRELIM; - csctrl_reg->mr7 = CFG_MR7_PRELIM; +#if (defined(CONFIG_SYS_AR7_PRELIM) && defined(CONFIG_SYS_CR7_PRELIM) && defined(CONFIG_SYS_MR7_PRELIM)) + csctrl_reg->ar7 = CONFIG_SYS_AR7_PRELIM; + csctrl_reg->cr7 = CONFIG_SYS_CR7_PRELIM; + csctrl_reg->mr7 = CONFIG_SYS_MR7_PRELIM; #endif #endif /* #ifndef CONFIG_MONITOR_IS_IN_RAM */ #ifdef CONFIG_FSL_I2C - CFG_I2C_PINMUX_REG &= CFG_I2C_PINMUX_CLR; - CFG_I2C_PINMUX_REG |= CFG_I2C_PINMUX_SET; + CONFIG_SYS_I2C_PINMUX_REG &= CONFIG_SYS_I2C_PINMUX_CLR; + CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET; #endif /* enable instruction cache now */ @@ -352,7 +352,7 @@ void uart_port_conf(void) volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO; /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: gpio->par_uart |= UART0_ENABLE_MASK; break; @@ -384,155 +384,155 @@ void cpu_init_f(void) #ifndef CONFIG_MONITOR_IS_IN_RAM /* Set speed /PLL */ MCFCLOCK_SYNCR = - MCFCLOCK_SYNCR_MFD(CFG_MFD) | MCFCLOCK_SYNCR_RFD(CFG_RFD); + MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD); while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ; MCFGPIO_PBCDPAR = 0xc0; /* Set up the GPIO ports */ -#ifdef CFG_PEPAR - MCFGPIO_PEPAR = CFG_PEPAR; +#ifdef CONFIG_SYS_PEPAR + MCFGPIO_PEPAR = CONFIG_SYS_PEPAR; #endif -#ifdef CFG_PFPAR - MCFGPIO_PFPAR = CFG_PFPAR; +#ifdef CONFIG_SYS_PFPAR + MCFGPIO_PFPAR = CONFIG_SYS_PFPAR; #endif -#ifdef CFG_PJPAR - MCFGPIO_PJPAR = CFG_PJPAR; +#ifdef CONFIG_SYS_PJPAR + MCFGPIO_PJPAR = CONFIG_SYS_PJPAR; #endif -#ifdef CFG_PSDPAR - MCFGPIO_PSDPAR = CFG_PSDPAR; +#ifdef CONFIG_SYS_PSDPAR + MCFGPIO_PSDPAR = CONFIG_SYS_PSDPAR; #endif -#ifdef CFG_PASPAR - MCFGPIO_PASPAR = CFG_PASPAR; +#ifdef CONFIG_SYS_PASPAR + MCFGPIO_PASPAR = CONFIG_SYS_PASPAR; #endif -#ifdef CFG_PEHLPAR - MCFGPIO_PEHLPAR = CFG_PEHLPAR; +#ifdef CONFIG_SYS_PEHLPAR + MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR; #endif -#ifdef CFG_PQSPAR - MCFGPIO_PQSPAR = CFG_PQSPAR; +#ifdef CONFIG_SYS_PQSPAR + MCFGPIO_PQSPAR = CONFIG_SYS_PQSPAR; #endif -#ifdef CFG_PTCPAR - MCFGPIO_PTCPAR = CFG_PTCPAR; +#ifdef CONFIG_SYS_PTCPAR + MCFGPIO_PTCPAR = CONFIG_SYS_PTCPAR; #endif -#ifdef CFG_PTDPAR - MCFGPIO_PTDPAR = CFG_PTDPAR; +#ifdef CONFIG_SYS_PTDPAR + MCFGPIO_PTDPAR = CONFIG_SYS_PTDPAR; #endif -#ifdef CFG_PUAPAR - MCFGPIO_PUAPAR = CFG_PUAPAR; +#ifdef CONFIG_SYS_PUAPAR + MCFGPIO_PUAPAR = CONFIG_SYS_PUAPAR; #endif -#ifdef CFG_DDRUA - MCFGPIO_DDRUA = CFG_DDRUA; +#ifdef CONFIG_SYS_DDRUA + MCFGPIO_DDRUA = CONFIG_SYS_DDRUA; #endif /* This is probably a bad place to setup chip selects, but everyone else is doing it! */ -#if defined(CFG_CS0_BASE) & defined(CFG_CS0_SIZE) & \ - defined(CFG_CS0_WIDTH) & defined(CFG_CS0_WS) +#if defined(CONFIG_SYS_CS0_BASE) & defined(CONFIG_SYS_CS0_SIZE) & \ + defined(CONFIG_SYS_CS0_WIDTH) & defined(CONFIG_SYS_CS0_WS) - MCFCSM_CSAR0 = (CFG_CS0_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR0 = (CONFIG_SYS_CS0_BASE >> 16) & 0xFFFF; -#if (CFG_CS0_WIDTH == 8) -#define CFG_CS0_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS0_WIDTH == 16) -#define CFG_CS0_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS0_WIDTH == 32) -#define CFG_CS0_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS0_WIDTH == 8) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS0_WIDTH == 16) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS0_WIDTH == 32) +#define CONFIG_SYS_CS0_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS0_WIDTH: Fault - wrong bus with for CS0" +#error "CONFIG_SYS_CS0_WIDTH: Fault - wrong bus with for CS0" #endif - MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CFG_CS0_WS) - | CFG_CS0_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CONFIG_SYS_CS0_WS) + | CONFIG_SYS_CS0_PS | MCFCSM_CSCR_AA; -#if (CFG_CS0_RO != 0) - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) +#if (CONFIG_SYS_CS0_RO != 0) + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CFG_CS0_SIZE - 1) | MCFCSM_CSMR_V; + MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 0 are not initialized/used" #endif -#if defined(CFG_CS1_BASE) & defined(CFG_CS1_SIZE) & \ - defined(CFG_CS1_WIDTH) & defined(CFG_CS1_WS) +#if defined(CONFIG_SYS_CS1_BASE) & defined(CONFIG_SYS_CS1_SIZE) & \ + defined(CONFIG_SYS_CS1_WIDTH) & defined(CONFIG_SYS_CS1_WS) - MCFCSM_CSAR1 = (CFG_CS1_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR1 = (CONFIG_SYS_CS1_BASE >> 16) & 0xFFFF; -#if (CFG_CS1_WIDTH == 8) -#define CFG_CS1_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS1_WIDTH == 16) -#define CFG_CS1_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS1_WIDTH == 32) -#define CFG_CS1_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS1_WIDTH == 8) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS1_WIDTH == 16) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS1_WIDTH == 32) +#define CONFIG_SYS_CS1_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS1_WIDTH: Fault - wrong bus with for CS1" +#error "CONFIG_SYS_CS1_WIDTH: Fault - wrong bus with for CS1" #endif - MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CFG_CS1_WS) - | CFG_CS1_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CONFIG_SYS_CS1_WS) + | CONFIG_SYS_CS1_PS | MCFCSM_CSCR_AA; -#if (CFG_CS1_RO != 0) - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) +#if (CONFIG_SYS_CS1_RO != 0) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CFG_CS1_SIZE - 1) + MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 1 are not initialized/used" #endif -#if defined(CFG_CS2_BASE) & defined(CFG_CS2_SIZE) & \ - defined(CFG_CS2_WIDTH) & defined(CFG_CS2_WS) +#if defined(CONFIG_SYS_CS2_BASE) & defined(CONFIG_SYS_CS2_SIZE) & \ + defined(CONFIG_SYS_CS2_WIDTH) & defined(CONFIG_SYS_CS2_WS) - MCFCSM_CSAR2 = (CFG_CS2_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR2 = (CONFIG_SYS_CS2_BASE >> 16) & 0xFFFF; -#if (CFG_CS2_WIDTH == 8) -#define CFG_CS2_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS2_WIDTH == 16) -#define CFG_CS2_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS2_WIDTH == 32) -#define CFG_CS2_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS2_WIDTH == 8) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS2_WIDTH == 16) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS2_WIDTH == 32) +#define CONFIG_SYS_CS2_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS2_WIDTH: Fault - wrong bus with for CS2" +#error "CONFIG_SYS_CS2_WIDTH: Fault - wrong bus with for CS2" #endif - MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CFG_CS2_WS) - | CFG_CS2_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CONFIG_SYS_CS2_WS) + | CONFIG_SYS_CS2_PS | MCFCSM_CSCR_AA; -#if (CFG_CS2_RO != 0) - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) +#if (CONFIG_SYS_CS2_RO != 0) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CFG_CS2_SIZE - 1) + MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1) | MCFCSM_CSMR_V; #endif #else #warning "Chip Select 2 are not initialized/used" #endif -#if defined(CFG_CS3_BASE) & defined(CFG_CS3_SIZE) & \ - defined(CFG_CS3_WIDTH) & defined(CFG_CS3_WS) +#if defined(CONFIG_SYS_CS3_BASE) & defined(CONFIG_SYS_CS3_SIZE) & \ + defined(CONFIG_SYS_CS3_WIDTH) & defined(CONFIG_SYS_CS3_WS) - MCFCSM_CSAR3 = (CFG_CS3_BASE >> 16) & 0xFFFF; + MCFCSM_CSAR3 = (CONFIG_SYS_CS3_BASE >> 16) & 0xFFFF; -#if (CFG_CS3_WIDTH == 8) -#define CFG_CS3_PS MCFCSM_CSCR_PS_8 -#elif (CFG_CS3_WIDTH == 16) -#define CFG_CS3_PS MCFCSM_CSCR_PS_16 -#elif (CFG_CS3_WIDTH == 32) -#define CFG_CS3_PS MCFCSM_CSCR_PS_32 +#if (CONFIG_SYS_CS3_WIDTH == 8) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_8 +#elif (CONFIG_SYS_CS3_WIDTH == 16) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_16 +#elif (CONFIG_SYS_CS3_WIDTH == 32) +#define CONFIG_SYS_CS3_PS MCFCSM_CSCR_PS_32 #else -#error "CFG_CS3_WIDTH: Fault - wrong bus with for CS1" +#error "CONFIG_SYS_CS3_WIDTH: Fault - wrong bus with for CS1" #endif - MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CFG_CS3_WS) - | CFG_CS3_PS | MCFCSM_CSCR_AA; + MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CONFIG_SYS_CS3_WS) + | CONFIG_SYS_CS3_PS | MCFCSM_CSCR_AA; -#if (CFG_CS3_RO != 0) - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) +#if (CONFIG_SYS_CS3_RO != 0) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) | MCFCSM_CSMR_WP | MCFCSM_CSMR_V; #else - MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CFG_CS3_SIZE - 1) + MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1) | MCFCSM_CSMR_V; #endif #else @@ -556,7 +556,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: MCFGPIO_PUAPAR &= 0xFc; MCFGPIO_PUAPAR |= 0x03; @@ -589,12 +589,12 @@ void cpu_init_f(void) * which is their primary function. * ~Jeremy */ - mbar2_writeLong(MCFSIM_GPIO_FUNC, CFG_GPIO_FUNC); - mbar2_writeLong(MCFSIM_GPIO1_FUNC, CFG_GPIO1_FUNC); - mbar2_writeLong(MCFSIM_GPIO_EN, CFG_GPIO_EN); - mbar2_writeLong(MCFSIM_GPIO1_EN, CFG_GPIO1_EN); - mbar2_writeLong(MCFSIM_GPIO_OUT, CFG_GPIO_OUT); - mbar2_writeLong(MCFSIM_GPIO1_OUT, CFG_GPIO1_OUT); + mbar2_writeLong(MCFSIM_GPIO_FUNC, CONFIG_SYS_GPIO_FUNC); + mbar2_writeLong(MCFSIM_GPIO1_FUNC, CONFIG_SYS_GPIO1_FUNC); + mbar2_writeLong(MCFSIM_GPIO_EN, CONFIG_SYS_GPIO_EN); + mbar2_writeLong(MCFSIM_GPIO1_EN, CONFIG_SYS_GPIO1_EN); + mbar2_writeLong(MCFSIM_GPIO_OUT, CONFIG_SYS_GPIO_OUT); + mbar2_writeLong(MCFSIM_GPIO1_OUT, CONFIG_SYS_GPIO1_OUT); /* * dBug Compliance: @@ -636,13 +636,13 @@ void cpu_init_f(void) * Setup chip selects... */ - mbar_writeShort(MCFSIM_CSAR1, CFG_CSAR1); - mbar_writeShort(MCFSIM_CSCR1, CFG_CSCR1); - mbar_writeLong(MCFSIM_CSMR1, CFG_CSMR1); + mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1); + mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1); + mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1); - mbar_writeShort(MCFSIM_CSAR0, CFG_CSAR0); - mbar_writeShort(MCFSIM_CSCR0, CFG_CSCR0); - mbar_writeLong(MCFSIM_CSMR0, CFG_CSMR0); + mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0); + mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0); + mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0); /* enable instruction cache now */ icache_enable(); @@ -659,7 +659,7 @@ int cpu_init_r(void) void uart_port_conf(void) { /* Setup Ports: */ - switch (CFG_UART_PORT) { + switch (CONFIG_SYS_UART_PORT) { case 0: break; case 1: -- cgit v1.1