From c63254ef5628efe1c77cb2fdba20753f9666f55d Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Tue, 12 May 2009 12:25:14 +0400 Subject: AFEB9260 network fix AFEB9260 uses PA10, PA11 for ETX2 and ETX3. Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence, not 0. Signed-off-by: Sergey Lapin --- cpu/arm926ejs/at91/at91sam9260_macb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'cpu/arm926ejs') diff --git a/cpu/arm926ejs/at91/at91sam9260_macb.c b/cpu/arm926ejs/at91/at91sam9260_macb.c index ab60fb7..ea5e767 100644 --- a/cpu/arm926ejs/at91/at91sam9260_macb.c +++ b/cpu/arm926ejs/at91/at91sam9260_macb.c @@ -47,7 +47,7 @@ void at91_macb_hw_init(void) at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ -#if defined(CONFIG_AT91SAM9260EK) +#if defined(CONFIG_AT91SAM9260EK) || defined(CONFIG_AFEB9260) /* * use PA10, PA11 for ETX2, ETX3. * PA23 and PA24 are for TWI EEPROM -- cgit v1.1