From e4f53022a8b0c911144fa8ec43a13da5641016fc Mon Sep 17 00:00:00 2001 From: Ye Li Date: Wed, 8 Mar 2017 21:53:08 +0800 Subject: MLK-14382-3 mx6ularm2: Convert to enable OF_CONTROL and DM drivers Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations to enable OF_CONTROL and DM drivers. 1. Update QSPI settings and codes for DM QSPI driver. 2. Update GPIO codes for adding gpio request 3. Enable FEC DM driver and update relevant configurations 4. Enable USB DM driver 5. Update PMIC and LDO by-pass codes for DM PMIC 6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR Signed-off-by: Ye Li --- configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig | 41 +++++++++++++++++++++++++- 1 file changed, 40 insertions(+), 1 deletion(-) (limited to 'configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig') diff --git a/configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig b/configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig index 4defb26..e8d9d11 100644 --- a/configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig +++ b/configs/mx6ul_14x14_ddr3_arm2_eimnor_defconfig @@ -1,5 +1,44 @@ CONFIG_ARM=y CONFIG_ARCH_MX6=y CONFIG_TARGET_MX6UL_14X14_DDR3_ARM2=y -CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ul_14x14_ddr3_arm2/imximage.cfg,SYS_BOOT_EIMNOR" +CONFIG_DEFAULT_DEVICE_TREE="imx6ul-14x14-ddr3-arm2" +CONFIG_DEFAULT_FDT_FILE="imx6ul-14x14-ddr3-arm2.dtb" +CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/freescale/mx6ul_14x14_ddr3_arm2/imximage.cfg" +CONFIG_NOR=y +CONFIG_NOR_BOOT=y +CONFIG_BOOTDELAY=3 +CONFIG_BOARD_EARLY_INIT_F=y +CONFIG_HUSH_PARSER=y +CONFIG_CMD_BOOTZ=y +# CONFIG_CMD_IMLS is not set +CONFIG_CMD_MEMTEST=y +CONFIG_CMD_NET=y +CONFIG_CMD_USB=y +CONFIG_CMD_I2C=y CONFIG_CMD_GPIO=y +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_CMD_CACHE=y +CONFIG_CMD_EXT2=y +CONFIG_CMD_EXT4=y +CONFIG_CMD_EXT4_WRITE=y +CONFIG_CMD_FAT=y +CONFIG_CMD_FS_GENERIC=y +CONFIG_OF_CONTROL=y +# CONFIG_BLK is not set +CONFIG_DM_GPIO=y +CONFIG_DM_I2C=y +# CONFIG_DM_MMC_OPS is not set +CONFIG_PINCTRL=y +CONFIG_PINCTRL_IMX6=y +CONFIG_DM_PMIC=y +CONFIG_DM_PMIC_PFUZE100=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_PFUZE100=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_REGULATOR_GPIO=y +CONFIG_USB=y +CONFIG_DM_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=n -- cgit v1.1