From 5468461d1ea05ff99cf206939293480cc86fd2ec Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Sat, 20 Dec 2014 03:34:23 +0900 Subject: cmd_i2c: change variable type for 10bit addressing support To store 10bit chip address, the variable type should not be uchar, but uint. Signed-off-by: Masahiro Yamada Cc: Heiko Schocher Cc: Simon Glass Acked-by: Simon Glass Acked-by: Heiko Schocher --- common/cmd_i2c.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'common') diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 22db1bb..f65ab61 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -83,12 +83,12 @@ DECLARE_GLOBAL_DATA_PTR; /* Display values from last command. * Memory modify remembered values are different from display memory. */ -static uchar i2c_dp_last_chip; +static uint i2c_dp_last_chip; static uint i2c_dp_last_addr; static uint i2c_dp_last_alen; static uint i2c_dp_last_length = 0x10; -static uchar i2c_mm_last_chip; +static uint i2c_mm_last_chip; static uint i2c_mm_last_addr; static uint i2c_mm_last_alen; @@ -282,7 +282,7 @@ static int i2c_report_err(int ret, enum i2c_err_op op) */ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; + uint chip; uint devaddr, length; int alen; u_char *memaddr; @@ -335,7 +335,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; + uint chip; uint devaddr, length; int alen; u_char *memaddr; @@ -444,7 +444,7 @@ static int do_i2c_flags(cmd_tbl_t *cmdtp, int flag, int argc, */ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; + uint chip; uint addr, length; int alen; int j, nbytes, linebytes; @@ -563,7 +563,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; int alen; uchar byte; @@ -649,7 +649,7 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; int alen; int count; @@ -734,7 +734,7 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] static int mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const argv[]) { - uchar chip; + uint chip; ulong addr; int alen; ulong data; @@ -957,7 +957,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv */ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { - u_char chip; + uint chip; int alen; uint addr; uint length; @@ -1085,7 +1085,7 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) { enum { unknown, EDO, SDRAM, DDR2 } type; - u_char chip; + uint chip; u_char data[128]; u_char cksum; int j; @@ -1563,7 +1563,7 @@ static int do_sdram (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) #if defined(CONFIG_I2C_EDID) int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) { - u_char chip; + uint chip; struct edid1_info edid; int ret; #ifdef CONFIG_DM_I2C -- cgit v1.1 From 0365ffcc0bd6335afb0c866423f3fe401b28ffaa Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Wed, 14 Jan 2015 17:07:05 +0900 Subject: generic-board: show model name in board_init_f() too The common/board_r.c has show_model_r() to display the model name if the DTB has a "model" property. It sounds useful to have a similar function in common/board_f.c too because most of the boards show their board name before relocation. Instead of implementing the same function in both common/board_f.c and common/board_r.c, let's split it up into common/show_board_info.c. Signed-off-by: Masahiro Yamada Acked-by: Simon Glass --- common/Makefile | 2 ++ common/board_f.c | 2 +- common/board_info.c | 35 +++++++++++++++++++++++++++++++++++ common/board_r.c | 18 +----------------- 4 files changed, 39 insertions(+), 18 deletions(-) create mode 100644 common/board_info.c (limited to 'common') diff --git a/common/Makefile b/common/Makefile index 94554f2..9579ab4 100644 --- a/common/Makefile +++ b/common/Makefile @@ -27,6 +27,8 @@ endif # boards obj-$(CONFIG_SYS_GENERIC_BOARD) += board_f.o obj-$(CONFIG_SYS_GENERIC_BOARD) += board_r.o +obj-$(CONFIG_DISPLAY_BOARDINFO) += board_info.o +obj-$(CONFIG_DISPLAY_BOARDINFO_LATE) += board_info.o # core command obj-y += cmd_boot.o diff --git a/common/board_f.c b/common/board_f.c index 215108b..7953137 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -894,7 +894,7 @@ static init_fnc_t init_sequence_f[] = { prt_mpc5xxx_clks, #endif /* CONFIG_MPC5xxx */ #if defined(CONFIG_DISPLAY_BOARDINFO) - checkboard, /* display board info */ + show_board_info, #endif INIT_FUNC_WATCHDOG_INIT #if defined(CONFIG_MISC_INIT_F) diff --git a/common/board_info.c b/common/board_info.c new file mode 100644 index 0000000..42d0641 --- /dev/null +++ b/common/board_info.c @@ -0,0 +1,35 @@ +/* + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int __weak checkboard(void) +{ + printf("Board: Unknown\n"); + return 0; +} + +/* + * If the root node of the DTB has a "model" property, show it. + * If CONFIG_OF_CONTROL is disabled or the "model" property is missing, + * fall back to checkboard(). + */ +int show_board_info(void) +{ +#ifdef CONFIG_OF_CONTROL + DECLARE_GLOBAL_DATA_PTR; + const char *model; + + model = fdt_getprop(gd->fdt_blob, 0, "model", NULL); + + if (model) { + printf("Model: %s\n", model); + return 0; + } +#endif + + return checkboard(); +} diff --git a/common/board_r.c b/common/board_r.c index a301cc2..68a9448 100644 --- a/common/board_r.c +++ b/common/board_r.c @@ -476,22 +476,6 @@ static int initr_api(void) } #endif -#ifdef CONFIG_DISPLAY_BOARDINFO_LATE -static int show_model_r(void) -{ - /* Put this here so it appears on the LCD, now it is ready */ -# ifdef CONFIG_OF_CONTROL - const char *model; - - model = (char *)fdt_getprop(gd->fdt_blob, 0, "model", NULL); - printf("Model: %s\n", model ? model : ""); -# else - checkboard(); -# endif - return 0; -} -#endif - /* enable exceptions */ #ifdef CONFIG_ARM static int initr_enable_interrupts(void) @@ -801,7 +785,7 @@ init_fnc_t init_sequence_r[] = { #endif console_init_r, /* fully init console as a device */ #ifdef CONFIG_DISPLAY_BOARDINFO_LATE - show_model_r, + show_board_info, #endif #ifdef CONFIG_ARCH_MISC_INIT arch_misc_init, /* miscellaneous arch-dependent init */ -- cgit v1.1 From a02af4aeece40e93bc7d79cd5dc912409efb7020 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 5 Jan 2015 20:05:31 -0700 Subject: dm: demo: Add a simple GPIO demonstration Add a new 'demo light' command which uses GPIOs to control imaginary lights. Each light is assigned a bit number in the overall value. This provides an example driver for using the new GPIO API. Signed-off-by: Simon Glass --- common/cmd_demo.c | 29 ++++++++++++++++++++++++++++- 1 file changed, 28 insertions(+), 1 deletion(-) (limited to 'common') diff --git a/common/cmd_demo.c b/common/cmd_demo.c index 652c61c..bcb34d9 100644 --- a/common/cmd_demo.c +++ b/common/cmd_demo.c @@ -39,6 +39,26 @@ static int do_demo_status(cmd_tbl_t *cmdtp, int flag, int argc, return 0; } +static int do_demo_light(cmd_tbl_t *cmdtp, int flag, int argc, + char * const argv[]) +{ + int light; + int ret; + + if (argc) { + light = simple_strtoul(argv[0], NULL, 16); + ret = demo_set_light(demo_dev, light); + } else { + ret = demo_get_light(demo_dev); + if (ret >= 0) { + printf("Light: %x\n", ret); + ret = 0; + } + } + + return ret; +} + int do_demo_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) { struct udevice *dev; @@ -61,6 +81,7 @@ int do_demo_list(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) static cmd_tbl_t demo_commands[] = { U_BOOT_CMD_MKENT(list, 0, 1, do_demo_list, "", ""), U_BOOT_CMD_MKENT(hello, 2, 1, do_demo_hello, "", ""), + U_BOOT_CMD_MKENT(light, 2, 1, do_demo_light, "", ""), U_BOOT_CMD_MKENT(status, 1, 1, do_demo_status, "", ""), }; @@ -86,6 +107,10 @@ static int do_demo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) return cmd_process_error(cmdtp, ret); argc--; argv++; + } else { + demo_dev = NULL; + if (demo_cmd->cmd != do_demo_list) + return CMD_RET_USAGE; } ret = demo_cmd->cmd(demo_cmd, flag, argc, argv); @@ -98,5 +123,7 @@ U_BOOT_CMD( "Driver model (dm) demo operations", "list List available demo devices\n" "demo hello [] Say hello\n" - "demo status Get demo device status" + "demo light [] Set or get the lights\n" + "demo status Get demo device status\n" + "demo list List available demo devices" ); -- cgit v1.1 From f9a4c2da72d04e13b05deecb800f232d2948eb85 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Mon, 12 Jan 2015 18:02:07 -0700 Subject: dm: i2c: Rename driver model I2C functions to permit compatibility Add a dm_ prefix to driver model I2C functions so that we can keep the old ones around. This is a little unfortunate, but on reflection it is too difficult to change the API. We can undo this rename when most boards and drivers are converted to use driver model for I2C. Signed-off-by: Simon Glass --- common/cmd_i2c.c | 28 ++++++++++++++++------------ common/exports.c | 3 ++- 2 files changed, 18 insertions(+), 13 deletions(-) (limited to 'common') diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index f65ab61..1e500fb 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -133,7 +133,7 @@ static uchar i2c_no_probes[] = CONFIG_SYS_I2C_NOPROBES; #ifdef CONFIG_DM_I2C static struct udevice *i2c_cur_bus; -static int i2c_set_bus_num(unsigned int busnum) +static int cmd_i2c_set_bus_num(unsigned int busnum) { struct udevice *bus; int ret; @@ -323,7 +323,7 @@ static int do_i2c_read ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv if (!ret && alen != -1) ret = i2c_set_chip_offset_len(dev, alen); if (!ret) - ret = i2c_read(dev, devaddr, memaddr, length); + ret = dm_i2c_read(dev, devaddr, memaddr, length); #else ret = i2c_read(chip, devaddr, alen, memaddr, length); #endif @@ -381,7 +381,7 @@ static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[ while (length-- > 0) { #ifdef CONFIG_DM_I2C - ret = i2c_write(dev, devaddr++, memaddr++, 1); + ret = dm_i2c_write(dev, devaddr++, memaddr++, 1); #else ret = i2c_write(chip, devaddr++, alen, memaddr++, 1); #endif @@ -513,7 +513,7 @@ static int do_i2c_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] linebytes = (nbytes > DISP_LINE_LEN) ? DISP_LINE_LEN : nbytes; #ifdef CONFIG_DM_I2C - ret = i2c_read(dev, addr, linebuf, linebytes); + ret = dm_i2c_read(dev, addr, linebuf, linebytes); #else ret = i2c_read(chip, addr, alen, linebuf, linebytes); #endif @@ -611,7 +611,7 @@ static int do_i2c_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] while (count-- > 0) { #ifdef CONFIG_DM_I2C - ret = i2c_write(dev, addr++, &byte, 1); + ret = dm_i2c_write(dev, addr++, &byte, 1); #else ret = i2c_write(chip, addr++, alen, &byte, 1); #endif @@ -698,7 +698,7 @@ static int do_i2c_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] err = 0; while (count-- > 0) { #ifdef CONFIG_DM_I2C - ret = i2c_read(dev, addr, &byte, 1); + ret = dm_i2c_read(dev, addr, &byte, 1); #else ret = i2c_read(chip, addr, alen, &byte, 1); #endif @@ -793,7 +793,7 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg do { printf("%08lx:", addr); #ifdef CONFIG_DM_I2C - ret = i2c_read(dev, addr, (uchar *)&data, size); + ret = dm_i2c_read(dev, addr, (uchar *)&data, size); #else ret = i2c_read(chip, addr, alen, (uchar *)&data, size); #endif @@ -841,8 +841,8 @@ mod_i2c_mem(cmd_tbl_t *cmdtp, int incrflag, int flag, int argc, char * const arg */ bootretry_reset_cmd_timeout(); #ifdef CONFIG_DM_I2C - ret = i2c_write(dev, addr, (uchar *)&data, - size); + ret = dm_i2c_write(dev, addr, (uchar *)&data, + size); #else ret = i2c_write(chip, addr, alen, (uchar *)&data, size); @@ -917,7 +917,7 @@ static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv continue; #endif #ifdef CONFIG_DM_I2C - ret = i2c_probe(bus, j, 0, &dev); + ret = dm_i2c_probe(bus, j, 0, &dev); #else ret = i2c_probe(j); #endif @@ -1010,7 +1010,7 @@ static int do_i2c_loop(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] */ while (1) { #ifdef CONFIG_DM_I2C - ret = i2c_read(dev, addr, bytes, length); + ret = dm_i2c_read(dev, addr, bytes, length); #else ret = i2c_read(chip, addr, alen, bytes, length); #endif @@ -1579,7 +1579,7 @@ int do_edid(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]) #ifdef CONFIG_DM_I2C ret = i2c_get_cur_bus_chip(chip, &dev); if (!ret) - ret = i2c_read(dev, 0, (uchar *)&edid, sizeof(edid)); + ret = dm_i2c_read(dev, 0, (uchar *)&edid, sizeof(edid)); #else ret = i2c_read(chip, 0, 1, (uchar *)&edid, sizeof(edid)); #endif @@ -1696,7 +1696,11 @@ static int do_i2c_bus_num(cmd_tbl_t *cmdtp, int flag, int argc, } #endif printf("Setting bus to %d\n", bus_no); +#ifdef CONFIG_DM_I2C + ret = cmd_i2c_set_bus_num(bus_no); +#else ret = i2c_set_bus_num(bus_no); +#endif if (ret) printf("Failure changing bus number (%d)\n", ret); } diff --git a/common/exports.c b/common/exports.c index 88fcfc8..459e18c 100644 --- a/common/exports.c +++ b/common/exports.c @@ -23,7 +23,8 @@ unsigned long get_version(void) # define install_hdlr irq_install_handler # define free_hdlr irq_free_handler #endif -#ifndef CONFIG_CMD_I2C +#if !defined(CONFIG_CMD_I2C) || \ + (defined(CONFIG_DM_I2C) && !defined(CONFIG_DM_I2C_COMPAT)) # define i2c_write dummy # define i2c_read dummy #endif -- cgit v1.1 From 25ab4b0303f2df5e6b94ed92e37875a7c98f4de3 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Sun, 25 Jan 2015 08:26:55 -0700 Subject: dm: i2c: Provide an offset length parameter where needed Rather than assuming that the chip offset length is 1, allow it to be provided. This allows chips that don't use the default offset length to be used (at present they are only supported by the command line 'i2c' command which sets the offset length explicitly). Signed-off-by: Simon Glass Acked-by: Heiko Schocher --- common/cmd_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'common') diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c index 1e500fb..7c3ad00 100644 --- a/common/cmd_i2c.c +++ b/common/cmd_i2c.c @@ -168,7 +168,7 @@ static int i2c_get_cur_bus_chip(uint chip_addr, struct udevice **devp) if (ret) return ret; - return i2c_get_chip(bus, chip_addr, devp); + return i2c_get_chip(bus, chip_addr, 1, devp); } #endif -- cgit v1.1 From 49cad54788a64a296567abadcd736fdbe47cc3a3 Mon Sep 17 00:00:00 2001 From: Martin Dorwig Date: Mon, 26 Jan 2015 15:22:54 -0700 Subject: Export redesign this is an atempt to make the export of functions typesafe. I replaced the jumptable void ** by a struct (jt_funcs) with function pointers. The EXPORT_FUNC macro now has 3 fixed parameters and one variadic parameter The first is the name of the exported function, the rest of the parameters are used to format a functionpointer in the jumptable, the EXPORT_FUNC macros are expanded three times, 1. to declare the members of the struct 2. to initialize the structmember pointers 3. to call the functions in stubs.c Signed-off-by: Martin Dorwig Acked-by: Simon Glass Signed-off-by: Simon Glass (resending to the list since my tweaks are not quite trivial) --- common/cmd_load.c | 2 +- common/console.c | 20 ++++++++++---------- common/exports.c | 29 +++-------------------------- 3 files changed, 14 insertions(+), 37 deletions(-) (limited to 'common') diff --git a/common/cmd_load.c b/common/cmd_load.c index f6e522c..d043e6d 100644 --- a/common/cmd_load.c +++ b/common/cmd_load.c @@ -222,7 +222,7 @@ static int read_record(char *buf, ulong len) } /* Check for the console hangup (if any different from serial) */ - if (gd->jt[XF_getc] != getc) { + if (gd->jt->getc != getc) { if (ctrlc()) { return (-1); } diff --git a/common/console.c b/common/console.c index fc1963b..3f25e76 100644 --- a/common/console.c +++ b/common/console.c @@ -125,13 +125,13 @@ static int console_setfile(int file, struct stdio_dev * dev) */ switch (file) { case stdin: - gd->jt[XF_getc] = getc; - gd->jt[XF_tstc] = tstc; + gd->jt->getc = getc; + gd->jt->tstc = tstc; break; case stdout: - gd->jt[XF_putc] = putc; - gd->jt[XF_puts] = puts; - gd->jt[XF_printf] = printf; + gd->jt->putc = putc; + gd->jt->puts = puts; + gd->jt->printf = printf; break; } break; @@ -758,11 +758,11 @@ int console_init_r(void) #endif /* set default handlers at first */ - gd->jt[XF_getc] = serial_getc; - gd->jt[XF_tstc] = serial_tstc; - gd->jt[XF_putc] = serial_putc; - gd->jt[XF_puts] = serial_puts; - gd->jt[XF_printf] = serial_printf; + gd->jt->getc = serial_getc; + gd->jt->tstc = serial_tstc; + gd->jt->putc = serial_putc; + gd->jt->puts = serial_puts; + gd->jt->printf = serial_printf; /* stdin stdout and stderr are in environment */ /* scan for it */ diff --git a/common/exports.c b/common/exports.c index 459e18c..333107c 100644 --- a/common/exports.c +++ b/common/exports.c @@ -1,6 +1,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -13,34 +14,10 @@ unsigned long get_version(void) return XF_VERSION; } -/* Reuse _exports.h with a little trickery to avoid bitrot */ -#define EXPORT_FUNC(sym) gd->jt[XF_##sym] = (void *)sym; - -#if !defined(CONFIG_X86) && !defined(CONFIG_PPC) -# define install_hdlr dummy -# define free_hdlr dummy -#else /* kludge for non-standard function naming */ -# define install_hdlr irq_install_handler -# define free_hdlr irq_free_handler -#endif -#if !defined(CONFIG_CMD_I2C) || \ - (defined(CONFIG_DM_I2C) && !defined(CONFIG_DM_I2C_COMPAT)) -# define i2c_write dummy -# define i2c_read dummy -#endif -#if !defined(CONFIG_CMD_SPI) || defined(CONFIG_DM_SPI) -# define spi_init dummy -# define spi_setup_slave dummy -# define spi_free_slave dummy -#endif -#ifndef CONFIG_CMD_SPI -# define spi_claim_bus dummy -# define spi_release_bus dummy -# define spi_xfer dummy -#endif +#define EXPORT_FUNC(f, a, x, ...) gd->jt->x = f; void jumptable_init(void) { - gd->jt = malloc(XF_MAX * sizeof(void *)); + gd->jt = malloc(sizeof(struct jt_funcs)); #include <_exports.h> } -- cgit v1.1 From 46fe2c04443f3d777791910da21649bb3ddf878f Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 23 Jan 2015 16:01:57 +0530 Subject: hash: Add function to find hash_algo struct with progressive hash The hash_algo structure has some implementations in which progressive hash API's are not defined. These are basically the hardware based implementations of SHA. An API is added to find the algo which has progressive hash API's defined. This can then be integrated with RSA checksum library which uses Progressive Hash API's. Signed-off-by: Ruchika Gupta CC: Simon Glass Acked-by: Simon Glass --- common/hash.c | 33 ++++++++++++++++++++++++--------- 1 file changed, 24 insertions(+), 9 deletions(-) (limited to 'common') diff --git a/common/hash.c b/common/hash.c index aceabc5..c4d8c3a 100644 --- a/common/hash.c +++ b/common/hash.c @@ -20,7 +20,7 @@ #include #include -#ifdef CONFIG_CMD_SHA1SUM +#ifdef CONFIG_SHA1 static int hash_init_sha1(struct hash_algo *algo, void **ctxp) { sha1_context *ctx = malloc(sizeof(sha1_context)); @@ -125,12 +125,7 @@ static struct hash_algo hash_algo[] = { CHUNKSZ_SHA256, }, #endif - /* - * This is CONFIG_CMD_SHA1SUM instead of CONFIG_SHA1 since otherwise - * it bloats the code for boards which use SHA1 but not the 'hash' - * or 'sha1sum' commands. - */ -#ifdef CONFIG_CMD_SHA1SUM +#ifdef CONFIG_SHA1 { "sha1", SHA1_SUM_LEN, @@ -140,7 +135,6 @@ static struct hash_algo hash_algo[] = { hash_update_sha1, hash_finish_sha1, }, -#define MULTI_HASH #endif #ifdef CONFIG_SHA256 { @@ -152,7 +146,6 @@ static struct hash_algo hash_algo[] = { hash_update_sha256, hash_finish_sha256, }, -#define MULTI_HASH #endif { "crc32", @@ -165,6 +158,10 @@ static struct hash_algo hash_algo[] = { }, }; +#if defined(CONFIG_SHA256) || defined(CONFIG_CMD_SHA1SUM) +#define MULTI_HASH +#endif + #if defined(CONFIG_HASH_VERIFY) || defined(CONFIG_CMD_HASH) #define MULTI_HASH #endif @@ -311,6 +308,24 @@ int hash_lookup_algo(const char *algo_name, struct hash_algo **algop) return -EPROTONOSUPPORT; } +int hash_progressive_lookup_algo(const char *algo_name, + struct hash_algo **algop) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { + if (!strcmp(algo_name, hash_algo[i].name)) { + if (hash_algo[i].hash_init) { + *algop = &hash_algo[i]; + return 0; + } + } + } + + debug("Unknown hash algorithm '%s'\n", algo_name); + return -EPROTONOSUPPORT; +} + void hash_show(struct hash_algo *algo, ulong addr, ulong len, uint8_t *output) { int i; -- cgit v1.1 From 2dd90027196175d0bcea411c933927d73994588d Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 23 Jan 2015 16:01:58 +0530 Subject: Use hash.c in mkimage Signed-off-by: Ruchika Gupta CC: Simon Glass Acked-by: Simon Glass --- common/hash.c | 81 +++++++++++++++++++++++++++++++++-------------------------- 1 file changed, 46 insertions(+), 35 deletions(-) (limited to 'common') diff --git a/common/hash.c b/common/hash.c index c4d8c3a..d154d02 100644 --- a/common/hash.c +++ b/common/hash.c @@ -10,15 +10,24 @@ * SPDX-License-Identifier: GPL-2.0+ */ +#ifndef USE_HOSTCC #include #include #include #include +#include +#include +#else +#include "mkimage.h" +#include +#include +#endif /* !USE_HOSTCC*/ + #include +#include #include #include -#include -#include +#include #ifdef CONFIG_SHA1 static int hash_init_sha1(struct hash_algo *algo, void **ctxp) @@ -173,6 +182,40 @@ static struct hash_algo hash_algo[] = { #define multi_hash() 0 #endif +int hash_lookup_algo(const char *algo_name, struct hash_algo **algop) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { + if (!strcmp(algo_name, hash_algo[i].name)) { + *algop = &hash_algo[i]; + return 0; + } + } + + debug("Unknown hash algorithm '%s'\n", algo_name); + return -EPROTONOSUPPORT; +} + +int hash_progressive_lookup_algo(const char *algo_name, + struct hash_algo **algop) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { + if (!strcmp(algo_name, hash_algo[i].name)) { + if (hash_algo[i].hash_init) { + *algop = &hash_algo[i]; + return 0; + } + } + } + + debug("Unknown hash algorithm '%s'\n", algo_name); + return -EPROTONOSUPPORT; +} + +#ifndef USE_HOSTCC /** * store_result: Store the resulting sum to an address or variable * @@ -293,39 +336,6 @@ static int parse_verify_sum(struct hash_algo *algo, char *verify_str, return 0; } -int hash_lookup_algo(const char *algo_name, struct hash_algo **algop) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { - if (!strcmp(algo_name, hash_algo[i].name)) { - *algop = &hash_algo[i]; - return 0; - } - } - - debug("Unknown hash algorithm '%s'\n", algo_name); - return -EPROTONOSUPPORT; -} - -int hash_progressive_lookup_algo(const char *algo_name, - struct hash_algo **algop) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(hash_algo); i++) { - if (!strcmp(algo_name, hash_algo[i].name)) { - if (hash_algo[i].hash_init) { - *algop = &hash_algo[i]; - return 0; - } - } - } - - debug("Unknown hash algorithm '%s'\n", algo_name); - return -EPROTONOSUPPORT; -} - void hash_show(struct hash_algo *algo, ulong addr, ulong len, uint8_t *output) { int i; @@ -439,3 +449,4 @@ int hash_command(const char *algo_name, int flags, cmd_tbl_t *cmdtp, int flag, return 0; } +#endif -- cgit v1.1 From b37b46f042ccfcfb97a9ef8b8a568812640a2a70 Mon Sep 17 00:00:00 2001 From: Ruchika Gupta Date: Fri, 23 Jan 2015 16:01:59 +0530 Subject: rsa: Use checksum algorithms from struct hash_algo Currently the hash functions used in RSA are called directly from the sha1 and sha256 libraries. Change the RSA checksum library to use the progressive hash API's registered with struct hash_algo. This will allow the checksum library to use the hardware accelerated progressive hash API's once available. Signed-off-by: Ruchika Gupta CC: Simon Glass Acked-by: Simon Glass Signed-off-by: Simon Glass (Fixed build error in am335x_boneblack_vboot due to duplicate CONFIG_DM) Change-Id: Ic44279432f88d4e8594c6e94feb1cfcae2443a54 --- common/image-sig.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'common') diff --git a/common/image-sig.c b/common/image-sig.c index 8601eda..2c9f0cd 100644 --- a/common/image-sig.c +++ b/common/image-sig.c @@ -38,7 +38,7 @@ struct checksum_algo checksum_algos[] = { #if IMAGE_ENABLE_SIGN EVP_sha1, #endif - sha1_calculate, + hash_calculate, padding_sha1_rsa2048, }, { @@ -48,7 +48,7 @@ struct checksum_algo checksum_algos[] = { #if IMAGE_ENABLE_SIGN EVP_sha256, #endif - sha256_calculate, + hash_calculate, padding_sha256_rsa2048, }, { @@ -58,7 +58,7 @@ struct checksum_algo checksum_algos[] = { #if IMAGE_ENABLE_SIGN EVP_sha256, #endif - sha256_calculate, + hash_calculate, padding_sha256_rsa4096, } -- cgit v1.1