From affae2bff825c1a8d2cfeaf7b270188d251d39d2 Mon Sep 17 00:00:00 2001 From: wdenk Date: Sat, 17 Aug 2002 09:36:01 +0000 Subject: Initial revision --- common/usb_storage.c | 895 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 895 insertions(+) create mode 100644 common/usb_storage.c (limited to 'common/usb_storage.c') diff --git a/common/usb_storage.c b/common/usb_storage.c new file mode 100644 index 0000000..b134721 --- /dev/null +++ b/common/usb_storage.c @@ -0,0 +1,895 @@ +/* + * (C) Copyright 2001 + * Denis Peter, MPL AG Switzerland + * + * Most of this source has been derived from the Linux USB + * project. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + * + */ + +/* Note: + * Currently only the CBI transport protocoll has been implemented, and it + * is only tested with a TEAC USB Floppy. Other Massstorages with CBI or CB + * transport protocoll may work as well. + */ + + + +#include +#include +#include + + +#if (CONFIG_COMMANDS & CFG_CMD_USB) +#include + +#ifdef CONFIG_USB_STORAGE + +#undef USB_STOR_DEBUG + +#ifdef USB_STOR_DEBUG +#define USB_STOR_PRINTF(fmt,args...) printf (fmt ,##args) +#else +#define USB_STOR_PRINTF(fmt,args...) +#endif + +#include +/* direction table -- this indicates the direction of the data + * transfer for each command code -- a 1 indicates input + */ +unsigned char us_direction[256/8] = { + 0x28, 0x81, 0x14, 0x14, 0x20, 0x01, 0x90, 0x77, + 0x0C, 0x20, 0x00, 0x04, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 +}; +#define US_DIRECTION(x) ((us_direction[x>>3] >> (x & 7)) & 1) + +static unsigned char usb_stor_buf[512]; +static ccb usb_ccb; + +/* + * CBI style + */ + +#define US_CBI_ADSC 0 + + +#define USB_MAX_STOR_DEV 5 +static int usb_max_devs; /* number of highest available usb device */ + +static block_dev_desc_t usb_dev_desc[USB_MAX_STOR_DEV]; + +struct us_data; +typedef int (*trans_cmnd)(ccb*, struct us_data*); +typedef int (*trans_reset)(struct us_data*); + +struct us_data { + struct usb_device *pusb_dev; /* this usb_device */ + unsigned int flags; /* from filter initially */ + unsigned char ifnum; /* interface number */ + unsigned char ep_in; /* in endpoint */ + unsigned char ep_out; /* out ....... */ + unsigned char ep_int; /* interrupt . */ + unsigned char subclass; /* as in overview */ + unsigned char protocol; /* .............. */ + unsigned char attention_done; /* force attn on first cmd */ + unsigned short ip_data; /* interrupt data */ + int action; /* what to do */ + int ip_wanted; /* needed */ + int *irq_handle; /* for USB int requests */ + unsigned int irqpipe; /* pipe for release_irq */ + unsigned char irqmaxp; /* max packed for irq Pipe */ + unsigned char irqinterval; /* Intervall for IRQ Pipe */ + ccb *srb; /* current srb */ + trans_reset transport_reset; /* reset routine */ + trans_cmnd transport; /* transport routine */ +}; + +static struct us_data usb_stor[USB_MAX_STOR_DEV]; + + + +#define USB_STOR_TRANSPORT_GOOD 0 +#define USB_STOR_TRANSPORT_FAILED -1 +#define USB_STOR_TRANSPORT_ERROR -2 + + + + + + +int usb_stor_get_info(struct usb_device *dev, struct us_data *us, block_dev_desc_t *dev_desc); +int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss); +unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer); +struct usb_device * usb_get_dev_index(int index); +void uhci_show_temp_int_td(void); + +block_dev_desc_t *usb_stor_get_dev(int index) +{ + return &usb_dev_desc[index]; +} + + +void usb_show_progress(void) +{ + printf("."); +} + +/********************************************************************************* + * (re)-scan the usb and reports device info + * to the user if mode = 1 + * returns current device or -1 if no + */ +int usb_stor_scan(int mode) +{ + unsigned char i; + struct usb_device *dev; + + if(mode==1) { + printf("scanning bus for storage devices...\n"); + } + usb_disable_asynch(1); /* asynch transfer not allowed */ + + for(i=0;i0) + return 0; + else + return-1; +} + +static int usb_stor_irq(struct usb_device *dev) +{ + struct us_data *us; + us=(struct us_data *)dev->privptr; + + if(us->ip_wanted) { + us->ip_wanted=0; + } + return 0; +} + + +#ifdef USB_STOR_DEBUG + +static void usb_show_srb(ccb * pccb) +{ + int i; + printf("SRB: len %d datalen 0x%lX\n ",pccb->cmdlen,pccb->datalen); + for(i=0;i<12;i++) { + printf("%02X ",pccb->cmd[i]); + } + printf("\n"); +} + +static void display_int_status(unsigned long tmp) +{ + printf("Status: %s %s %s %s %s %s %s\n", + (tmp & USB_ST_ACTIVE) ? "Active" : "", + (tmp & USB_ST_STALLED) ? "Stalled" : "", + (tmp & USB_ST_BUF_ERR) ? "Buffer Error" : "", + (tmp & USB_ST_BABBLE_DET) ? "Babble Det" : "", + (tmp & USB_ST_NAK_REC) ? "NAKed" : "", + (tmp & USB_ST_CRC_ERR) ? "CRC Error" : "", + (tmp & USB_ST_BIT_ERR) ? "Bitstuff Error" : ""); +} +#endif +/*********************************************************************** + * Data transfer routines + ***********************************************************************/ + +static int us_one_transfer(struct us_data *us, int pipe, char *buf, int length) +{ + int max_size; + int this_xfer; + int result; + int partial; + int maxtry; + int stat; + + /* determine the maximum packet size for these transfers */ + max_size = usb_maxpacket(us->pusb_dev, pipe) * 16; + + /* while we have data left to transfer */ + while (length) { + + /* calculate how long this will be -- maximum or a remainder */ + this_xfer = length > max_size ? max_size : length; + length -= this_xfer; + + /* setup the retry counter */ + maxtry = 10; + + /* set up the transfer loop */ + do { + /* transfer the data */ + USB_STOR_PRINTF("Bulk xfer 0x%x(%d) try #%d\n", + (unsigned int)buf, this_xfer, 11 - maxtry); + result = usb_bulk_msg(us->pusb_dev, pipe, buf, + this_xfer, &partial, USB_CNTL_TIMEOUT*5); + USB_STOR_PRINTF("bulk_msg returned %d xferred %d/%d\n", + result, partial, this_xfer); + if(us->pusb_dev->status!=0) { + /* if we stall, we need to clear it before we go on */ +#ifdef USB_STOR_DEBUG + display_int_status(us->pusb_dev->status); +#endif + if (us->pusb_dev->status & USB_ST_STALLED) { + USB_STOR_PRINTF("stalled ->clearing endpoint halt for pipe 0x%x\n", pipe); + stat = us->pusb_dev->status; + usb_clear_halt(us->pusb_dev, pipe); + us->pusb_dev->status=stat; + if(this_xfer == partial) { + USB_STOR_PRINTF("bulk transferred with error %X, but data ok\n",us->pusb_dev->status); + return 0; + } + else + return result; + } + if (us->pusb_dev->status & USB_ST_NAK_REC) { + USB_STOR_PRINTF("Device NAKed bulk_msg\n"); + return result; + } + if(this_xfer == partial) { + USB_STOR_PRINTF("bulk transferred with error %d, but data ok\n",us->pusb_dev->status); + return 0; + } + /* if our try counter reaches 0, bail out */ + USB_STOR_PRINTF("bulk transferred with error %d, data %d\n",us->pusb_dev->status,partial); + if (!maxtry--) + return result; + } + /* update to show what data was transferred */ + this_xfer -= partial; + buf += partial; + /* continue until this transfer is done */ + } while ( this_xfer ); + } + + /* if we get here, we're done and successful */ + return 0; +} + +/* FIXME: this reset function doesn't really reset the port, and it + * should. Actually it should probably do what it's doing here, and + * reset the port physically + */ +static int usb_stor_CB_reset(struct us_data *us) +{ + unsigned char cmd[12]; + int result; + + USB_STOR_PRINTF("CB_reset\n"); + memset(cmd, 0xFF, sizeof(cmd)); + cmd[0] = SCSI_SEND_DIAG; + cmd[1] = 4; + result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), + US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, cmd, sizeof(cmd), USB_CNTL_TIMEOUT*5); + + /* long wait for reset */ + wait_ms(1500); + USB_STOR_PRINTF("CB_reset result %d: status %X clearing endpoint halt\n",result,us->pusb_dev->status); + usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_in)); + usb_clear_halt(us->pusb_dev, usb_rcvbulkpipe(us->pusb_dev, us->ep_out)); + + USB_STOR_PRINTF("CB_reset done\n"); + return 0; +} + +/* FIXME: we also need a CBI_command which sets up the completion + * interrupt, and waits for it + */ +int usb_stor_CB_comdat(ccb *srb, struct us_data *us) +{ + int result; + int dir_in,retry; + unsigned int pipe; + unsigned long status; + + retry=5; + dir_in=US_DIRECTION(srb->cmd[0]); + + if(dir_in) + pipe=usb_rcvbulkpipe(us->pusb_dev, us->ep_in); + else + pipe=usb_sndbulkpipe(us->pusb_dev, us->ep_out); + while(retry--) { + USB_STOR_PRINTF("CBI gets a command: Try %d\n",5-retry); +#ifdef USB_STOR_DEBUG + usb_show_srb(srb); +#endif + /* let's send the command via the control pipe */ + result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0), + US_CBI_ADSC, USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, us->ifnum, + srb->cmd, srb->cmdlen, USB_CNTL_TIMEOUT*5); + USB_STOR_PRINTF("CB_transport: control msg returned %d, status %X\n",result,us->pusb_dev->status); + /* check the return code for the command */ + if (result < 0) { + if(us->pusb_dev->status & USB_ST_STALLED) { + status=us->pusb_dev->status; + USB_STOR_PRINTF(" stall during command found, clear pipe\n"); + usb_clear_halt(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev,0)); + us->pusb_dev->status=status; + } + USB_STOR_PRINTF(" error during command %02X Stat = %X\n",srb->cmd[0],us->pusb_dev->status); + return result; + } + /* transfer the data payload for this command, if one exists*/ + + USB_STOR_PRINTF("CB_transport: control msg returned %d, direction is %s to go 0x%lx\n",result,dir_in ? "IN" : "OUT",srb->datalen); + if (srb->datalen) { + result = us_one_transfer(us, pipe, srb->pdata,srb->datalen); + USB_STOR_PRINTF("CBI attempted to transfer data, result is %d status %lX, len %d\n", result,us->pusb_dev->status,us->pusb_dev->act_len); + if(!(us->pusb_dev->status & USB_ST_NAK_REC)) + break; + } /* if (srb->datalen) */ + else + break; + } + /* return result */ + + return result; +} + + +int usb_stor_CBI_get_status(ccb *srb, struct us_data *us) +{ + int timeout; + + us->ip_wanted=1; + submit_int_msg(us->pusb_dev,us->irqpipe, + (void *)&us->ip_data,us->irqmaxp ,us->irqinterval); + timeout=1000; + while(timeout--) { + if((volatile int *)us->ip_wanted==0) + break; + wait_ms(10); + } + if (us->ip_wanted) { + printf(" Did not get interrupt on CBI\n"); + us->ip_wanted = 0; + return USB_STOR_TRANSPORT_ERROR; + } + USB_STOR_PRINTF("Got interrupt data 0x%x, transfered %d status 0x%lX\n", us->ip_data,us->pusb_dev->irq_act_len,us->pusb_dev->irq_status); + /* UFI gives us ASC and ASCQ, like a request sense */ + if (us->subclass == US_SC_UFI) { + if (srb->cmd[0] == SCSI_REQ_SENSE || + srb->cmd[0] == SCSI_INQUIRY) + return USB_STOR_TRANSPORT_GOOD; /* Good */ + else + if (us->ip_data) + return USB_STOR_TRANSPORT_FAILED; + else + return USB_STOR_TRANSPORT_GOOD; + } + /* otherwise, we interpret the data normally */ + switch (us->ip_data) { + case 0x0001: + return USB_STOR_TRANSPORT_GOOD; + case 0x0002: + return USB_STOR_TRANSPORT_FAILED; + default: + return USB_STOR_TRANSPORT_ERROR; + } /* switch */ + return USB_STOR_TRANSPORT_ERROR; +} + +#define USB_TRANSPORT_UNKNOWN_RETRY 5 +#define USB_TRANSPORT_NOT_READY_RETRY 10 + +int usb_stor_CB_transport(ccb *srb, struct us_data *us) +{ + int result,status; + ccb *psrb; + ccb reqsrb; + int retry,notready; + + psrb=&reqsrb; + status=USB_STOR_TRANSPORT_GOOD; + retry=0; + notready=0; + /* issue the command */ +do_retry: + result=usb_stor_CB_comdat(srb,us); + USB_STOR_PRINTF("command / Data returned %d, status %X\n",result,us->pusb_dev->status); + /* if this is an CBI Protocol, get IRQ */ + if(us->protocol==US_PR_CBI) { + status=usb_stor_CBI_get_status(srb,us); + /* if the status is error, report it */ + if(status==USB_STOR_TRANSPORT_ERROR) { + USB_STOR_PRINTF(" USB CBI Command Error\n"); + return status; + } + srb->sense_buf[12]=(unsigned char)(us->ip_data>>8); + srb->sense_buf[13]=(unsigned char)(us->ip_data&0xff); + if(!us->ip_data) { + /* if the status is good, report it */ + if(status==USB_STOR_TRANSPORT_GOOD) { + USB_STOR_PRINTF(" USB CBI Command Good\n"); + return status; + } + } + } + /* do we have to issue an auto request? */ + /* HERE we have to check the result */ + if((result<0) && !(us->pusb_dev->status & USB_ST_STALLED)) { + USB_STOR_PRINTF("ERROR %X\n",us->pusb_dev->status); + us->transport_reset(us); + return USB_STOR_TRANSPORT_ERROR; + } + if((us->protocol==US_PR_CBI) && + ((srb->cmd[0]==SCSI_REQ_SENSE) || + (srb->cmd[0]==SCSI_INQUIRY))) { /* do not issue an autorequest after request sense */ + USB_STOR_PRINTF("No auto request and good\n"); + return USB_STOR_TRANSPORT_GOOD; + } + /* issue an request_sense */ + memset(&psrb->cmd[0],0,12); + psrb->cmd[0]=SCSI_REQ_SENSE; + psrb->cmd[1]=srb->lun<<5; + psrb->cmd[4]=18; + psrb->datalen=18; + psrb->pdata=&srb->sense_buf[0]; + psrb->cmdlen=12; + /* issue the command */ + result=usb_stor_CB_comdat(psrb,us); + USB_STOR_PRINTF("auto request returned %d\n",result); + /* if this is an CBI Protocol, get IRQ */ + if(us->protocol==US_PR_CBI) { + status=usb_stor_CBI_get_status(psrb,us); + } + if((result<0)&&!(us->pusb_dev->status & USB_ST_STALLED)) { + USB_STOR_PRINTF(" AUTO REQUEST ERROR %d\n",us->pusb_dev->status); + return USB_STOR_TRANSPORT_ERROR; + } + USB_STOR_PRINTF("autorequest returned 0x%02X 0x%02X 0x%02X 0x%02X\n",srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); + /* Check the auto request result */ + if((srb->sense_buf[2]==0) && + (srb->sense_buf[12]==0) && + (srb->sense_buf[13]==0)) /* ok, no sense */ + return USB_STOR_TRANSPORT_GOOD; + /* Check the auto request result */ + switch(srb->sense_buf[2]) { + case 0x01: /* Recovered Error */ + return USB_STOR_TRANSPORT_GOOD; + break; + case 0x02: /* Not Ready */ + if(notready++ > USB_TRANSPORT_NOT_READY_RETRY) { + printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X (NOT READY)\n", + srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); + return USB_STOR_TRANSPORT_FAILED; + } + else { + wait_ms(100); + goto do_retry; + } + break; + default: + if(retry++ > USB_TRANSPORT_UNKNOWN_RETRY) { + printf("cmd 0x%02X returned 0x%02X 0x%02X 0x%02X 0x%02X\n", + srb->cmd[0],srb->sense_buf[0],srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); + return USB_STOR_TRANSPORT_FAILED; + } + else + goto do_retry; + break; + } + return USB_STOR_TRANSPORT_FAILED; +} + + + +static int usb_inquiry(ccb *srb,struct us_data *ss) +{ + int retry,i; + retry=3; + do { + memset(&srb->cmd[0],0,12); + srb->cmd[0]=SCSI_INQUIRY; + srb->cmd[1]=srb->lun<<5; + srb->cmd[4]=36; + srb->datalen=36; + srb->cmdlen=12; + i=ss->transport(srb,ss); + USB_STOR_PRINTF("inquiry returns %d\n",i); + if(i==0) + break; + }while(retry--); + if(!retry) { + printf("error in inquiry\n"); + return -1; + } + return 0; +} + +static int usb_request_sense(ccb *srb,struct us_data *ss) +{ + char *ptr; + return 0; + ptr=srb->pdata; + memset(&srb->cmd[0],0,12); + srb->cmd[0]=SCSI_REQ_SENSE; + srb->cmd[1]=srb->lun<<5; + srb->cmd[4]=18; + srb->datalen=18; + srb->pdata=&srb->sense_buf[0]; + srb->cmdlen=12; + ss->transport(srb,ss); + USB_STOR_PRINTF("Request Sense returned %02X %02X %02X\n",srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); + srb->pdata=ptr; + return 0; +} + +static int usb_test_unit_ready(ccb *srb,struct us_data *ss) +{ + int retries=10; + do { + memset(&srb->cmd[0],0,12); + srb->cmd[0]=SCSI_TST_U_RDY; + srb->cmd[1]=srb->lun<<5; + srb->datalen=0; + srb->cmdlen=12; + if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) + { + return 0; + } + } while(retries--); + return -1; +} + +static int usb_read_capacity(ccb *srb,struct us_data *ss) +{ + int retry; + retry=2; /* retries */ + do { + memset(&srb->cmd[0],0,12); + srb->cmd[0]=SCSI_RD_CAPAC; + srb->cmd[1]=srb->lun<<5; + srb->datalen=8; + srb->cmdlen=12; + if(ss->transport(srb,ss)==USB_STOR_TRANSPORT_GOOD) { + return 0; + } + }while(retry--); + return -1; +} + +static int usb_read_10(ccb *srb,struct us_data *ss, unsigned long start, unsigned short blocks) +{ + memset(&srb->cmd[0],0,12); + srb->cmd[0]=SCSI_READ10; + srb->cmd[1]=srb->lun<<5; + srb->cmd[2]=((unsigned char) (start>>24))&0xff; + srb->cmd[3]=((unsigned char) (start>>16))&0xff; + srb->cmd[4]=((unsigned char) (start>>8))&0xff; + srb->cmd[5]=((unsigned char) (start))&0xff; + srb->cmd[7]=((unsigned char) (blocks>>8))&0xff; + srb->cmd[8]=(unsigned char) blocks & 0xff; + srb->cmdlen=12; + USB_STOR_PRINTF("read10: start %lx blocks %x\n",start,blocks); + return ss->transport(srb,ss); +} + + +#define USB_MAX_READ_BLK 20 + +unsigned long usb_stor_read(int device, unsigned long blknr, unsigned long blkcnt, unsigned long *buffer) +{ + unsigned long start,blks, buf_addr; + unsigned short smallblks; + struct usb_device *dev; + int retry,i; + ccb *srb=&usb_ccb; + device&=0xff; + /* Setup device + */ + USB_STOR_PRINTF("\nusb_read: dev %d \n",device); + dev=NULL; + for(i=0;idevnum==usb_dev_desc[device].target) + break; + } + + usb_disable_asynch(1); /* asynch transfer not allowed */ + srb->lun=usb_dev_desc[device].lun; + buf_addr=(unsigned long)buffer; + start=blknr; + blks=blkcnt; + if(usb_test_unit_ready(srb,(struct us_data *)dev->privptr)) { + printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n", + srb->sense_buf[2],srb->sense_buf[12],srb->sense_buf[13]); + return 0; + } + USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks, buf_addr); + do { + retry=2; + srb->pdata=(unsigned char *)buf_addr; + if(blks>USB_MAX_READ_BLK) { + smallblks=USB_MAX_READ_BLK; + } + else { + smallblks=(unsigned short) blks; + } +retry_it: + if(smallblks==USB_MAX_READ_BLK) + usb_show_progress(); + srb->datalen=usb_dev_desc[device].blksz * smallblks; + srb->pdata=(unsigned char *)buf_addr; + if(usb_read_10(srb,(struct us_data *)dev->privptr, start, smallblks)) { + USB_STOR_PRINTF("Read ERROR\n"); + usb_request_sense(srb,(struct us_data *)dev->privptr); + if(retry--) + goto retry_it; + blkcnt-=blks; + break; + } + start+=smallblks; + blks-=smallblks; + buf_addr+=srb->datalen; + } while(blks!=0); + USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr); + usb_disable_asynch(0); /* asynch transfer allowed */ + if(blkcnt>=USB_MAX_READ_BLK) + printf("\n"); + return(blkcnt); +} + + +/* Probe to see if a new device is actually a Storage device */ +int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,struct us_data *ss) +{ + struct usb_interface_descriptor *iface; + int i; + unsigned int flags = 0; + + int protocol = 0; + int subclass = 0; + + + memset(ss, 0, sizeof(struct us_data)); + + /* let's examine the device now */ + iface = &dev->config.if_desc[ifnum]; + +#if 0 + /* this is the place to patch some storage devices */ + USB_STOR_PRINTF("iVendor %X iProduct %X\n",dev->descriptor.idVendor,dev->descriptor.idProduct); + if ((dev->descriptor.idVendor) == 0x066b && (dev->descriptor.idProduct) == 0x0103) { + USB_STOR_PRINTF("patched for E-USB\n"); + protocol = US_PR_CB; + subclass = US_SC_UFI; /* an assumption */ + } +#endif + + if (dev->descriptor.bDeviceClass != 0 || + iface->bInterfaceClass != USB_CLASS_MASS_STORAGE || + iface->bInterfaceSubClass < US_SC_MIN || + iface->bInterfaceSubClass > US_SC_MAX) { + /* if it's not a mass storage, we go no further */ + return 0; + } + + /* At this point, we know we've got a live one */ + USB_STOR_PRINTF("\n\nUSB Mass Storage device detected\n"); + + /* Initialize the us_data structure with some useful info */ + ss->flags = flags; + ss->ifnum = ifnum; + ss->pusb_dev = dev; + ss->attention_done = 0; + + /* If the device has subclass and protocol, then use that. Otherwise, + * take data from the specific interface. + */ + if (subclass) { + ss->subclass = subclass; + ss->protocol = protocol; + } else { + ss->subclass = iface->bInterfaceSubClass; + ss->protocol = iface->bInterfaceProtocol; + } + + /* set the handler pointers based on the protocol */ + USB_STOR_PRINTF("Transport: "); + switch (ss->protocol) { + case US_PR_CB: + USB_STOR_PRINTF("Control/Bulk\n"); + ss->transport = usb_stor_CB_transport; + ss->transport_reset = usb_stor_CB_reset; + break; + + case US_PR_CBI: + USB_STOR_PRINTF("Control/Bulk/Interrupt\n"); + ss->transport = usb_stor_CB_transport; + ss->transport_reset = usb_stor_CB_reset; + break; + default: + printf("USB Starage Transport unknown / not yet implemented\n"); + return 0; + break; + } + + /* + * We are expecting a minimum of 2 endpoints - in and out (bulk). + * An optional interrupt is OK (necessary for CBI protocol). + * We will ignore any others. + */ + for (i = 0; i < iface->bNumEndpoints; i++) { + /* is it an BULK endpoint? */ + if ((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_BULK) { + if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN) + ss->ep_in = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + else + ss->ep_out = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + } + + /* is it an interrupt endpoint? */ + if ((iface->ep_desc[i].bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) + == USB_ENDPOINT_XFER_INT) { + ss->ep_int = iface->ep_desc[i].bEndpointAddress & + USB_ENDPOINT_NUMBER_MASK; + ss->irqinterval = iface->ep_desc[i].bInterval; + } + } + USB_STOR_PRINTF("Endpoints In %d Out %d Int %d\n", + ss->ep_in, ss->ep_out, ss->ep_int); + + /* Do some basic sanity checks, and bail if we find a problem */ + if (usb_set_interface(dev, iface->bInterfaceNumber, 0) || + !ss->ep_in || !ss->ep_out || + (ss->protocol == US_PR_CBI && ss->ep_int == 0)) { + USB_STOR_PRINTF("Problems with device\n"); + return 0; + } + /* set class specific stuff */ + /* We only handle certain protocols. Currently, this is + * the only one. + */ + if (ss->subclass != US_SC_UFI) { + printf("Sorry, protocol %d not yet supported.\n",ss->subclass); + return 0; + } + if(ss->ep_int) /* we had found an interrupt endpoint, prepare irq pipe */ + { + /* set up the IRQ pipe and handler */ + + ss->irqinterval = (ss->irqinterval > 0) ? ss->irqinterval : 255; + ss->irqpipe = usb_rcvintpipe(ss->pusb_dev, ss->ep_int); + ss->irqmaxp = usb_maxpacket(dev, ss->irqpipe); + dev->irq_handle=usb_stor_irq; + dev->privptr=(void *)ss; + } + return 1; +} + +int usb_stor_get_info(struct usb_device *dev,struct us_data *ss,block_dev_desc_t *dev_desc) +{ + unsigned char perq,modi; + unsigned long cap[2]; + unsigned long *capacity,*blksz; + ccb *pccb=&usb_ccb; + + ss->transport_reset(ss); + pccb->pdata=usb_stor_buf; + + dev_desc->target=dev->devnum; + pccb->lun=dev_desc->lun; + USB_STOR_PRINTF(" address %d\n",dev_desc->target); + + if(usb_inquiry(pccb,ss)) + return -1; + perq=usb_stor_buf[0]; + modi=usb_stor_buf[1]; + if((perq & 0x1f)==0x1f) { + return 0; /* skip unknown devices */ + } + if((modi&0x80)==0x80) {/* drive is removable */ + dev_desc->removable=1; + } + memcpy(&dev_desc->vendor[0], &usb_stor_buf[8], 8); + memcpy(&dev_desc->product[0], &usb_stor_buf[16], 16); + memcpy(&dev_desc->revision[0], &usb_stor_buf[32], 4); + dev_desc->vendor[8]=0; + dev_desc->product[16]=0; + dev_desc->revision[4]=0; + USB_STOR_PRINTF("ISO Vers %X, Response Data %X\n",usb_stor_buf[2],usb_stor_buf[3]); + if(usb_test_unit_ready(pccb,ss)) { + printf("Device NOT ready\n Request Sense returned %02X %02X %02X\n",pccb->sense_buf[2],pccb->sense_buf[12],pccb->sense_buf[13]); + if(dev_desc->removable==1) { + dev_desc->type=perq; + return 1; + } + else + return 0; + } + pccb->pdata=(unsigned char *)&cap[0]; + memset(pccb->pdata,0,8); + if(usb_read_capacity(pccb,ss)!=0) { + printf("READ_CAP ERROR\n"); + cap[0]=2880; + cap[1]=0x200; + } + USB_STOR_PRINTF("Read Capacity returns: 0x%lx, 0x%lx\n",cap[0],cap[1]); +#if 0 + if(cap[0]>(0x200000 * 10)) /* greater than 10 GByte */ + cap[0]>>=16; +#endif + cap[0]+=1; + capacity=&cap[0]; + blksz=&cap[1]; + USB_STOR_PRINTF("Capacity = 0x%lx, blocksz = 0x%lx\n",*capacity,*blksz); + dev_desc->lba=*capacity; + dev_desc->blksz=*blksz; + dev_desc->type=perq; + USB_STOR_PRINTF(" address %d\n",dev_desc->target); + USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type); + + init_part(dev_desc); + + USB_STOR_PRINTF("partype: %d\n",dev_desc->part_type); + return 1; +} + +#endif +#endif /* CONFIG_USB_STORAGE */ + + + -- cgit v1.1