From 6a195d2d8a9c321817e1f034afcdc8c8642664bc Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 27 May 2013 18:31:17 +0000 Subject: lcd: add functions to set up simplefb device tree simple-framebuffer is a new device tree binding that describes a pre- configured frame-buffer memory region and its format. The Linux kernel contains a driver that supports this binding. Implement functions to create a DT node (or fill in an existing node) with parameters that describe the framebuffer format that U-Boot is using. This will be immediately used by the Raspberry Pi board in U-Boot, and likely will be used by the Samsung ARM ChromeBook support soon too. It could well be used by many other boards (e.g. Tegra boards with built-in LCD panels, which aren't yet supported by the Linux kernel). Signed-off-by: Stephen Warren Acked-by: Simon Glass --- common/lcd.c | 87 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 87 insertions(+) (limited to 'common/lcd.c') diff --git a/common/lcd.c b/common/lcd.c index edae835..3a60484 100644 --- a/common/lcd.c +++ b/common/lcd.c @@ -57,6 +57,10 @@ #include #endif +#if defined(CONFIG_LCD_DT_SIMPLEFB) +#include +#endif + /************************************************************************/ /* ** FONT DATA */ /************************************************************************/ @@ -1182,3 +1186,86 @@ int lcd_get_screen_columns(void) { return CONSOLE_COLS; } + +#if defined(CONFIG_LCD_DT_SIMPLEFB) +static int lcd_dt_simplefb_configure_node(void *blob, int off) +{ + u32 stride; + fdt32_t cells[2]; + int ret; + const char format[] = +#if LCD_BPP == LCD_COLOR16 + "r5g6b5"; +#else + ""; +#endif + + if (!format[0]) + return -1; + + stride = panel_info.vl_col * 2; + + cells[0] = cpu_to_fdt32(gd->fb_base); + cells[1] = cpu_to_fdt32(stride * panel_info.vl_row); + ret = fdt_setprop(blob, off, "reg", cells, sizeof(cells[0]) * 2); + if (ret < 0) + return -1; + + cells[0] = cpu_to_fdt32(panel_info.vl_col); + ret = fdt_setprop(blob, off, "width", cells, sizeof(cells[0])); + if (ret < 0) + return -1; + + cells[0] = cpu_to_fdt32(panel_info.vl_row); + ret = fdt_setprop(blob, off, "height", cells, sizeof(cells[0])); + if (ret < 0) + return -1; + + cells[0] = cpu_to_fdt32(stride); + ret = fdt_setprop(blob, off, "stride", cells, sizeof(cells[0])); + if (ret < 0) + return -1; + + ret = fdt_setprop(blob, off, "format", format, strlen(format) + 1); + if (ret < 0) + return -1; + + ret = fdt_delprop(blob, off, "status"); + if (ret < 0) + return -1; + + return 0; +} + +int lcd_dt_simplefb_add_node(void *blob) +{ + const char compat[] = "simple-framebuffer"; + const char disabled[] = "disabled"; + int off, ret; + + off = fdt_add_subnode(blob, 0, "framebuffer"); + if (off < 0) + return -1; + + ret = fdt_setprop(blob, off, "status", disabled, sizeof(disabled)); + if (ret < 0) + return -1; + + ret = fdt_setprop(blob, off, "compatible", compat, sizeof(compat)); + if (ret < 0) + return -1; + + return lcd_dt_simplefb_configure_node(blob, off); +} + +int lcd_dt_simplefb_enable_existing_node(void *blob) +{ + int off; + + off = fdt_node_offset_by_compatible(blob, -1, "simple-framebuffer"); + if (off < 0) + return -1; + + return lcd_dt_simplefb_configure_node(blob, off); +} +#endif -- cgit v1.1