From e09f7ab5749c345f924da272bea0521a73af5b11 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:04 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem This patch prepares the migration from the legacy NAND driver to U-Boot's new NAND subsystem for esd boards. Signed-off-by: Matthias Fuchs --- board/esd/common/auto_update.c | 4 ++ board/esd/common/esd405ep_nand.c | 87 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 91 insertions(+) create mode 100644 board/esd/common/esd405ep_nand.c (limited to 'board') diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c index 001fd68..b5f7722 100644 --- a/board/esd/common/auto_update.c +++ b/board/esd/common/auto_update.c @@ -31,7 +31,9 @@ #include #include #include +#if defined(CFG_NAND_LEGACY) #include +#endif #include #include @@ -294,6 +296,8 @@ int au_do_update(int i, long sz) rc = nand_legacy_rw(nand_dev_desc, NANDRW_WRITE | NANDRW_JFFS2, start, nbytes, (size_t *)&total, (uchar *)addr); debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n", rc, total, nbytes); +#else + rc = -1; #endif } if (rc != 0) { diff --git a/board/esd/common/esd405ep_nand.c b/board/esd/common/esd405ep_nand.c new file mode 100644 index 0000000..7ac4b83 --- /dev/null +++ b/board/esd/common/esd405ep_nand.c @@ -0,0 +1,87 @@ +/* + * (C) Copyright 2007 + * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +#if (CONFIG_COMMANDS & CFG_CMD_NAND) +#include +#include + +/* + * hardware specific access to control-lines + */ +static void esd405ep_nand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +{ + switch(cmd) { + case NAND_CTL_SETCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CLE); + break; + case NAND_CTL_CLRCLE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CLE); + break; + case NAND_CTL_SETALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_ALE); + break; + case NAND_CTL_CLRALE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_ALE); + break; + case NAND_CTL_SETNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_NAND_CE); + break; + case NAND_CTL_CLRNCE: + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + break; + } +} + + +/* + * read device ready pin + */ +static int esd405ep_nand_device_ready(struct mtd_info *mtdinfo) +{ + if (in_be32((void *)GPIO0_IR) & CFG_NAND_RDY) + return 1; + return 0; +} + + +int board_nand_init(struct nand_chip *nand) +{ + /* + * Set NAND-FLASH GPIO signals to defaults + */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_NAND_CE); + + /* + * Initialize nand_chip structure + */ + nand->hwcontrol = esd405ep_nand_hwcontrol; + nand->dev_ready = esd405ep_nand_device_ready; + nand->eccmode = NAND_ECC_SOFT; + nand->chip_delay = NAND_BIG_DELAY_US; + nand->options = NAND_SAMSUNG_LP_OPTIONS; + return 0; +} +#endif /* (CONFIG_COMMANDS & CFG_CMD_NAND) */ -- cgit v1.1 From bd84ee4c2020c3a6861f4bb2e7ea0fb49f82e803 Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 9 Jul 2007 10:10:06 +0200 Subject: Migrate esd 405EP boards to new NAND subsystem Migrate esd 405EP boards to new NAND subsystem -cleanup -use correct io accessors (in/out_be32()) Signed-off-by: Matthias Fuchs --- board/esd/ash405/Makefile | 4 +++- board/esd/ash405/ash405.c | 43 ++++++++++-------------------------- board/esd/cms700/Makefile | 5 ++++- board/esd/cms700/cms700.c | 39 +++++++-------------------------- board/esd/hh405/Makefile | 5 ++++- board/esd/hh405/hh405.c | 22 +------------------ board/esd/hub405/Makefile | 4 +++- board/esd/hub405/hub405.c | 34 ---------------------------- board/esd/plu405/Makefile | 5 ++++- board/esd/plu405/plu405.c | 56 ++++++++--------------------------------------- board/esd/voh405/Makefile | 4 +++- board/esd/voh405/voh405.c | 20 ----------------- board/esd/wuh405/Makefile | 4 +++- board/esd/wuh405/wuh405.c | 33 ---------------------------- 14 files changed, 53 insertions(+), 225 deletions(-) (limited to 'board') diff --git a/board/esd/ash405/Makefile b/board/esd/ash405/Makefile index 4d75868..308f752 100644 --- a/board/esd/ash405/Makefile +++ b/board/esd/ash405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/ash405/ash405.c b/board/esd/ash405/ash405.c index 84fc3a0..0151d74 100644 --- a/board/esd/ash405/ash405.c +++ b/board/esd/ash405/ash405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -33,6 +34,7 @@ #endif extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); +extern void lxt971_no_sleep(void); /* fpga configuration data - gzip compressed and generated by bin2c */ const unsigned char fpgadata[] = @@ -164,18 +166,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +214,18 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) +void reset_phy(void) { - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} +#ifdef CONFIG_LXT971_NO_SLEEP -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} + /* + * Disable sleep mode in LXT971 + */ + lxt971_no_sleep(); #endif +} diff --git a/board/esd/cms700/Makefile b/board/esd/cms700/Makefile index df48766..0d4ab2d 100644 --- a/board/esd/cms700/Makefile +++ b/board/esd/cms700/Makefile @@ -33,7 +33,10 @@ CPLD = ../common/xilinx_jtag/lenval.o \ ../common/xilinx_jtag/micro.o \ ../common/xilinx_jtag/ports.o -COBJS = $(BOARD).o flash.o ../common/misc.o $(CPLD) +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + $(CPLD) \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/cms700/cms700.c b/board/esd/cms700/cms700.c index cb04710..2cdd7be 100644 --- a/board/esd/cms700/cms700.c +++ b/board/esd/cms700/cms700.c @@ -1,5 +1,5 @@ /* - * (C) Copyright 2005 + * (C) Copyright 2005-2007 * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -68,9 +69,9 @@ int board_early_init_f (void) /* * Reset CPLD via GPIO12 (CS3) pin */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_PLD_RESET); udelay(1000); /* wait 1ms */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_PLD_RESET); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_PLD_RESET); udelay(1000); /* wait 1ms */ return 0; @@ -94,13 +95,7 @@ int misc_init_r (void) /* * Setup and enable EEPROM write protection */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); - - /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); return (0); } @@ -153,11 +148,6 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } @@ -180,17 +170,17 @@ int eeprom_write_enable (unsigned dev_addr, int state) switch (state) { case 1: /* Enable write access, clear bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_EEPROM_WP); state = 0; break; case 0: /* Disable write access, set bit GPIO_SINT2. */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_EEPROM_WP); state = 0; break; default: /* Read current status back. */ - state = (0 == (in32(GPIO0_OR) & CFG_EEPROM_WP)); + state = (0 == (in_be32((void *)GPIO0_OR) & CFG_EEPROM_WP)); break; } } @@ -235,19 +225,6 @@ U_BOOT_CMD(eepwren, 2, 0, do_eep_wren, /* ------------------------------------------------------------------------- */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/hh405/Makefile b/board/esd/hh405/Makefile index ce7876c..0e5e57a 100644 --- a/board/esd/hh405/Makefile +++ b/board/esd/hh405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hh405/hh405.c b/board/esd/hh405/hh405.c index ea344c0..67b5d54 100644 --- a/board/esd/hh405/hh405.c +++ b/board/esd/hh405/hh405.c @@ -5,7 +5,7 @@ * (C) Copyright 2005 * Stefan Roese, DENX Software Engineering, sr@denx.de. * - * (C) Copyright 2006 + * (C) Copyright 2006-2007 * Matthias Fuchs, esd GmbH, matthias.fuchs@esd-electronics.com * * See file CREDITS for list of people who contributed to this @@ -477,12 +477,6 @@ int misc_init_r (void) out32(GPIO0_OR, in32(GPIO0_OR) | CFG_EEPROM_WP); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Reset touch-screen controller */ out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_TOUCH_RST); @@ -690,20 +684,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - #if defined(CFG_EEPROM_WREN) /* Input: I2C address of EEPROM device to enable. * -1: deliver current state diff --git a/board/esd/hub405/Makefile b/board/esd/hub405/Makefile index 4d75868..308f752 100644 --- a/board/esd/hub405/Makefile +++ b/board/esd/hub405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/hub405/hub405.c b/board/esd/hub405/hub405.c index 1e0accb..25c8068 100644 --- a/board/esd/hub405/hub405.c +++ b/board/esd/hub405/hub405.c @@ -153,12 +153,6 @@ int misc_init_r (void) out32(GPIO0_OR, val); /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * check board type and setup AP power */ str = getenv("bd_type"); /* this is only set on non prototype hardware */ @@ -242,33 +236,5 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } - - -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/plu405/Makefile b/board/esd/plu405/Makefile index ce7876c..0e5e57a 100644 --- a/board/esd/plu405/Makefile +++ b/board/esd/plu405/Makefile @@ -28,7 +28,10 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o ../common/auto_update.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ + ../common/auto_update.o SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/plu405/plu405.c b/board/esd/plu405/plu405.c index 59171f8..f026a7a 100644 --- a/board/esd/plu405/plu405.c +++ b/board/esd/plu405/plu405.c @@ -23,6 +23,7 @@ #include #include +#include #include #include @@ -31,6 +32,8 @@ #define FPGA_DEBUG #endif +DECLARE_GLOBAL_DATA_PTR; + extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]); extern void lxt971_no_sleep(void); @@ -114,6 +117,10 @@ int misc_init_r (void) int index; int i; + /* adjust flash start and offset */ + gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; + gd->bd->bi_flashoffset = 0; + dst = malloc(CFG_FPGA_MAX_SIZE); if (gunzip (dst, CFG_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { printf ("GUNZIP ERROR - must RESET board to recover\n"); @@ -177,18 +184,12 @@ int misc_init_r (void) /* * Reset external DUARTs */ - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_DUART_RST); /* set reset to high */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) | CFG_DUART_RST); udelay(10); /* wait 10us */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~CFG_DUART_RST); /* set reset to low */ + out_be32((void *)GPIO0_OR, in_be32((void *)GPIO0_OR) & ~CFG_DUART_RST); udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -226,24 +227,10 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - - #ifdef CONFIG_IDE_RESET void ide_set_reset(int on) { @@ -262,31 +249,6 @@ void ide_set_reset(int on) #endif /* CONFIG_IDE_RESET */ -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif - - -#ifdef CONFIG_AUTO_UPDATE_SHOW -void board_auto_update_show(int au_active) -{ - if (au_active) { - printf("\n Dies ist die board-funktion: Updating!!!\n"); - } else { - printf("\n Dies ist die board-funktion: Updating done!!!\n"); - } -} -#endif - void reset_phy(void) { #ifdef CONFIG_LXT971_NO_SLEEP diff --git a/board/esd/voh405/Makefile b/board/esd/voh405/Makefile index 4d75868..308f752 100644 --- a/board/esd/voh405/Makefile +++ b/board/esd/voh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/voh405/voh405.c b/board/esd/voh405/voh405.c index 22995b5..2857a0be 100644 --- a/board/esd/voh405/voh405.c +++ b/board/esd/voh405/voh405.c @@ -195,12 +195,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -340,17 +334,3 @@ void ide_set_reset(int on) } } #endif /* CONFIG_IDE_RESET */ - - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif diff --git a/board/esd/wuh405/Makefile b/board/esd/wuh405/Makefile index 4d75868..308f752 100644 --- a/board/esd/wuh405/Makefile +++ b/board/esd/wuh405/Makefile @@ -28,7 +28,9 @@ endif LIB = $(obj)lib$(BOARD).a -COBJS = $(BOARD).o flash.o ../common/misc.o +COBJS = $(BOARD).o flash.o \ + ../common/misc.o \ + ../common/esd405ep_nand.o \ SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) OBJS := $(addprefix $(obj),$(COBJS)) diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 5a1a3f3..0b53062 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -170,12 +170,6 @@ int misc_init_r (void) udelay(1000); /* wait 1ms */ /* - * Set NAND-FLASH GPIO signals to default - */ - out32(GPIO0_OR, in32(GPIO0_OR) & ~(CFG_NAND_CLE | CFG_NAND_ALE)); - out32(GPIO0_OR, in32(GPIO0_OR) | CFG_NAND_CE); - - /* * Enable interrupts in exar duart mcr[3] */ *duart0_mcr = 0x08; @@ -218,35 +212,8 @@ long int initdram (int board_type) mtdcr(memcfga, mem_mb0cf); val = mfdcr(memcfgd); -#if 0 - printf("\nmb0cf=%x\n", val); /* test-only */ - printf("strap=%x\n", mfdcr(strap)); /* test-only */ -#endif - return (4*1024*1024 << ((val & 0x000e0000) >> 17)); } /* ------------------------------------------------------------------------- */ -int testdram (void) -{ - /* TODO: XXX XXX XXX */ - printf ("test: 16 MB - ok\n"); - - return (0); -} - -/* ------------------------------------------------------------------------- */ - -#if (CONFIG_COMMANDS & CFG_CMD_NAND) -#include -extern struct nand_chip nand_dev_desc[CFG_MAX_NAND_DEVICE]; - -void nand_init(void) -{ - nand_probe(CFG_NAND_BASE); - if (nand_dev_desc[0].ChipID != NAND_ChipID_UNKNOWN) { - print_size(nand_dev_desc[0].totlen, "\n"); - } -} -#endif -- cgit v1.1 From c8603cfbd4573379a6076c9c208545ba2bbf019a Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Mon, 9 Jul 2007 11:00:24 +0200 Subject: Small coding style cleanup Signed-off-by: Stefan Roese --- board/esd/cpci405/cpci405.c | 1 - board/esd/wuh405/wuh405.c | 1 - 2 files changed, 2 deletions(-) (limited to 'board') diff --git a/board/esd/cpci405/cpci405.c b/board/esd/cpci405/cpci405.c index 2ed0fc2..2358577 100644 --- a/board/esd/cpci405/cpci405.c +++ b/board/esd/cpci405/cpci405.c @@ -585,7 +585,6 @@ int pci_pre_init(struct pci_controller *hose) #endif /* defined(CONFIG_PCI) */ - #ifdef CONFIG_CPCI405AB #define ONE_WIRE_CLEAR (*(volatile unsigned short *)(CFG_FPGA_BASE_ADDR + CFG_FPGA_MODE) \ diff --git a/board/esd/wuh405/wuh405.c b/board/esd/wuh405/wuh405.c index 0b53062..5fde8d6 100644 --- a/board/esd/wuh405/wuh405.c +++ b/board/esd/wuh405/wuh405.c @@ -216,4 +216,3 @@ long int initdram (int board_type) } /* ------------------------------------------------------------------------- */ - -- cgit v1.1 From 2d78074d2e806edc380c1464eb9e5df335ece65e Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 22 Jun 2007 17:32:28 +0200 Subject: ppc7xx: Update CPCI750 board This small CPCI750 update extends the board specific command "show_config" to display the Marvell strapping registers and extends the PCI IDE controller. Signed-off-by: Reinhard Arlt Signed-off-by: Stefan Roese --- board/esd/cpci750/cpci750.c | 89 +++++++++++++++++++++++++++++++++++++++++++-- board/esd/cpci750/ide.c | 2 + 2 files changed, 87 insertions(+), 4 deletions(-) (limited to 'board') diff --git a/board/esd/cpci750/cpci750.c b/board/esd/cpci750/cpci750.c index 17e3568..298aa6a 100644 --- a/board/esd/cpci750/cpci750.c +++ b/board/esd/cpci750/cpci750.c @@ -55,6 +55,71 @@ #define DP(x) #endif +static char show_config_tab[][15] = {{"PCI0DLL_2 "}, /* 31 */ + {"PCI0DLL_1 "}, /* 30 */ + {"PCI0DLL_0 "}, /* 29 */ + {"PCI1DLL_2 "}, /* 28 */ + {"PCI1DLL_1 "}, /* 27 */ + {"PCI1DLL_0 "}, /* 26 */ + {"BbEP2En "}, /* 25 */ + {"SDRAMRdDataDel"}, /* 24 */ + {"SDRAMRdDel "}, /* 23 */ + {"SDRAMSync "}, /* 22 */ + {"SDRAMPipeSel_1"}, /* 21 */ + {"SDRAMPipeSel_0"}, /* 20 */ + {"SDRAMAddDel "}, /* 19 */ + {"SDRAMClkSel "}, /* 18 */ + {"Reserved(1!) "}, /* 17 */ + {"PCIRty "}, /* 16 */ + {"BootCSWidth_1 "}, /* 15 */ + {"BootCSWidth_0 "}, /* 14 */ + {"PCI1PadsCal "}, /* 13 */ + {"PCI0PadsCal "}, /* 12 */ + {"MultiMVId_1 "}, /* 11 */ + {"MultiMVId_0 "}, /* 10 */ + {"MultiGTEn "}, /* 09 */ + {"Int60xArb "}, /* 08 */ + {"CPUBusConfig_1"}, /* 07 */ + {"CPUBusConfig_0"}, /* 06 */ + {"DefIntSpc "}, /* 05 */ + {0 }, /* 04 */ + {"SROMAdd_1 "}, /* 03 */ + {"SROMAdd_0 "}, /* 02 */ + {"DRAMPadCal "}, /* 01 */ + {"SInitEn "}, /* 00 */ + {0 }, /* 31 */ + {0 }, /* 30 */ + {0 }, /* 29 */ + {0 }, /* 28 */ + {0 }, /* 27 */ + {0 }, /* 26 */ + {0 }, /* 25 */ + {0 }, /* 24 */ + {0 }, /* 23 */ + {0 }, /* 22 */ + {"JTAGCalBy "}, /* 21 */ + {"GB2Sel "}, /* 20 */ + {"GB1Sel "}, /* 19 */ + {"DRAMPLL_MDiv_5"}, /* 18 */ + {"DRAMPLL_MDiv_4"}, /* 17 */ + {"DRAMPLL_MDiv_3"}, /* 16 */ + {"DRAMPLL_MDiv_2"}, /* 15 */ + {"DRAMPLL_MDiv_1"}, /* 14 */ + {"DRAMPLL_MDiv_0"}, /* 13 */ + {"GB0Sel "}, /* 12 */ + {"DRAMPLLPU "}, /* 11 */ + {"DRAMPLL_HIKVCO"}, /* 10 */ + {"DRAMPLLNP "}, /* 09 */ + {"DRAMPLL_NDiv_7"}, /* 08 */ + {"DRAMPLL_NDiv_6"}, /* 07 */ + {"CPUPadCal "}, /* 06 */ + {"DRAMPLL_NDiv_5"}, /* 05 */ + {"DRAMPLL_NDiv_4"}, /* 04 */ + {"DRAMPLL_NDiv_3"}, /* 03 */ + {"DRAMPLL_NDiv_2"}, /* 02 */ + {"DRAMPLL_NDiv_1"}, /* 01 */ + {"DRAMPLL_NDiv_0"}}; /* 00 */ + extern void flush_data_cache (void); extern void invalidate_l1_instruction_cache (void); extern flash_info_t flash_info[]; @@ -901,21 +966,37 @@ void board_prebootm_init () dcache_disable (); } - -int do_show_cfg(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) +int do_show_config(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) { unsigned int reset_sample_low; unsigned int reset_sample_high; + unsigned int l, l1, l2; GT_REG_READ(0x3c4, &reset_sample_low); GT_REG_READ(0x3d4, &reset_sample_high); printf("Reset configuration 0x%08x 0x%08x\n", reset_sample_low, reset_sample_high); + l2 = 0; + for (l=0; l<63; l++) { + if (show_config_tab[l][0] != 0) { + printf("%14s:%1x ", show_config_tab[l], + ((reset_sample_low >> (31 - (l & 0x1f)))) & 0x01); + l2++; + if ((l2 % 4) == 0) + printf("\n"); + } else { + l1++; + } + if (l == 32) + reset_sample_low = reset_sample_high; + } + printf("\n"); + return(0); } U_BOOT_CMD( - show_cfg, 1, 1, do_show_cfg, - "show_cfg- Show Marvell strapping register\n", + show_config, 1, 1, do_show_config, + "show_config - Show Marvell strapping register\n", "Show Marvell strapping register (ResetSampleLow ResetSampleHigh)\n" ); diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c index 01b90c6..0adafe2 100644 --- a/board/esd/cpci750/ide.c +++ b/board/esd/cpci750/ide.c @@ -43,6 +43,8 @@ int ide_preinit (void) ide_bus_offset[l] = -ATA_STATUS; } devbusfn = pci_find_device (0x1103, 0x0004, 0); + if (devbusfn == -1) + devbusfn = pci_find_device (0x1095, 0x3114, 0); if (devbusfn != -1) { status = 0; -- cgit v1.1 From 78f9fef7f406078c8bf7191e665a73f795157746 Mon Sep 17 00:00:00 2001 From: Scott Wood Date: Wed, 15 Aug 2007 15:46:46 -0500 Subject: mpc885ads: Don't define CONFIG_BZIP2. bzip2 requires a significant chunk of malloc space, and there isn't enough room on mpc885ads (with only 8MB RAM) for both bzip2's malloc area and a downloaded image at 0x400000. Signed-off-by: Scott Wood --- board/fads/fads.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'board') diff --git a/board/fads/fads.h b/board/fads/fads.h index c6f7ccd..a7fe2e9 100644 --- a/board/fads/fads.h +++ b/board/fads/fads.h @@ -71,7 +71,10 @@ #undef CONFIG_BOOTARGS #undef CONFIG_WATCHDOG /* watchdog disabled */ + +#if !defined(CONFIG_MPC885ADS) #define CONFIG_BZIP2 /* include support for bzip2 compressed images */ +#endif /* * New MPC86xADS and MPC885ADS provide two Ethernet connectivity options: -- cgit v1.1