From bd99e6d0e4769922252a7a0e44f319ab9354739d Mon Sep 17 00:00:00 2001 From: Minkyu Kang Date: Thu, 11 Sep 2014 14:02:03 +0900 Subject: Revert "odroid: set MPLL clock to 880MHz" This reverts commit b09200639d4c052e2bdf0df6fe843b7a8bcf01cc. --- board/samsung/odroid/odroid.c | 60 +++++++++++++++++++++---------------------- 1 file changed, 30 insertions(+), 30 deletions(-) (limited to 'board') diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index fd5d2d2..ac19527 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -195,8 +195,8 @@ static void board_clock_init(void) while (readl(&clk->mux_stat_dmc) & MUX_STAT_DMC_CHANGING) continue; - /* Set MPLL to 880MHz */ - set = SDIV(0) | PDIV(3) | MDIV(110) | FSEL(0) | PLL_ENABLE(1); + /* Set MPLL to 800MHz */ + set = SDIV(0) | PDIV(3) | MDIV(100) | FSEL(0) | PLL_ENABLE(1); clrsetbits_le32(&clk->mpll_con0, clr_pll_con0, set); @@ -220,15 +220,15 @@ static void board_clock_init(void) DMC_RATIO(7) | DMCD_RATIO(7) | DMCP_RATIO(7); /* * For: - * MOUTdmc = 880 MHz - * MOUTdphy = 880 MHz + * MOUTdmc = 800 MHz + * MOUTdphy = 800 MHz * - * aclk_acp = MOUTdmc / (ratio + 1) = 220 (3) - * pclk_acp = aclk_acp / (ratio + 1) = 110 (1) - * sclk_dphy = MOUTdphy / (ratio + 1) = 440 (1) - * sclk_dmc = MOUTdmc / (ratio + 1) = 440 (1) - * aclk_dmcd = sclk_dmc / (ratio + 1) = 220 (1) - * aclk_dmcp = aclk_dmcd / (ratio + 1) = 110 (1) + * aclk_acp = MOUTdmc / (ratio + 1) = 200 (3) + * pclk_acp = aclk_acp / (ratio + 1) = 100 (1) + * sclk_dphy = MOUTdphy / (ratio + 1) = 400 (1) + * sclk_dmc = MOUTdmc / (ratio + 1) = 400 (1) + * aclk_dmcd = sclk_dmc / (ratio + 1) = 200 (1) + * aclk_dmcp = aclk_dmcd / (ratio + 1) = 100 (1) */ set = ACP_RATIO(3) | ACP_PCLK_RATIO(1) | DPHY_RATIO(1) | DMC_RATIO(1) | DMCD_RATIO(1) | DMCP_RATIO(1); @@ -244,13 +244,13 @@ static void board_clock_init(void) C2C_ACLK_RATIO(7) | DVSEM_RATIO(127) | DPM_RATIO(127); /* * For: - * MOUTg2d = 880 MHz - * MOUTc2c = 880 Mhz + * MOUTg2d = 800 MHz + * MOUTc2c = 800 Mhz * MOUTpwi = 108 MHz * - * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 440 (1) - * sclk_c2c = MOUTc2c / (ratio + 1) = 440 (1) - * aclk_c2c = sclk_c2c / (ratio + 1) = 220 (1) + * sclk_g2d_acp = MOUTg2d / (ratio + 1) = 400 (1) + * sclk_c2c = MOUTc2c / (ratio + 1) = 400 (1) + * aclk_c2c = sclk_c2c / (ratio + 1) = 200 (1) * sclk_pwi = MOUTpwi / (ratio + 1) = 18 (5) */ set = G2D_ACP_RATIO(1) | C2C_RATIO(1) | PWI_RATIO(5) | @@ -282,9 +282,9 @@ static void board_clock_init(void) clr = UART0_RATIO(15) | UART1_RATIO(15) | UART2_RATIO(15) | UART3_RATIO(15) | UART4_RATIO(15); /* - * For MOUTuart0-4: 880MHz + * For MOUTuart0-4: 800MHz * - * SCLK_UARTx = MOUTuartX / (ratio + 1) = 110 (7) + * SCLK_UARTx = MOUTuartX / (ratio + 1) = 100 (7) */ set = UART0_RATIO(7) | UART1_RATIO(7) | UART2_RATIO(7) | UART3_RATIO(7) | UART4_RATIO(7); @@ -298,12 +298,12 @@ static void board_clock_init(void) clr = MMC0_RATIO(15) | MMC0_PRE_RATIO(255) | MMC1_RATIO(15) | MMC1_PRE_RATIO(255); /* - * For MOUTmmc0-3 = 880 MHz (MPLL) + * For MOUTmmc0-3 = 800 MHz (MPLL) * - * DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 110 (7) - * sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 60 (1) - * DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 110 (7) - * sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 60 (1) + * DOUTmmc1 = MOUTmmc1 / (ratio + 1) = 100 (7) + * sclk_mmc1 = DOUTmmc1 / (ratio + 1) = 50 (1) + * DOUTmmc0 = MOUTmmc0 / (ratio + 1) = 100 (7) + * sclk_mmc0 = DOUTmmc0 / (ratio + 1) = 50 (1) */ set = MMC0_RATIO(7) | MMC0_PRE_RATIO(1) | MMC1_RATIO(7) | MMC1_PRE_RATIO(1); @@ -318,12 +318,12 @@ static void board_clock_init(void) clr = MMC2_RATIO(15) | MMC2_PRE_RATIO(255) | MMC3_RATIO(15) | MMC3_PRE_RATIO(255); /* - * For MOUTmmc0-3 = 880 MHz (MPLL) + * For MOUTmmc0-3 = 800 MHz (MPLL) * - * DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 110 (7) - * sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 60 (1) - * DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 110 (7) - * sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 60 (1) + * DOUTmmc3 = MOUTmmc3 / (ratio + 1) = 100 (7) + * sclk_mmc3 = DOUTmmc3 / (ratio + 1) = 50 (1) + * DOUTmmc2 = MOUTmmc2 / (ratio + 1) = 100 (7) + * sclk_mmc2 = DOUTmmc2 / (ratio + 1) = 50 (1) */ set = MMC2_RATIO(7) | MMC2_PRE_RATIO(1) | MMC3_RATIO(7) | MMC3_PRE_RATIO(1); @@ -337,10 +337,10 @@ static void board_clock_init(void) /* CLK_DIV_FSYS3 */ clr = MMC4_RATIO(15) | MMC4_PRE_RATIO(255); /* - * For MOUTmmc4 = 880 MHz (MPLL) + * For MOUTmmc4 = 800 MHz (MPLL) * - * DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 110 (7) - * sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 110 (0) + * DOUTmmc4 = MOUTmmc4 / (ratio + 1) = 100 (7) + * sclk_mmc4 = DOUTmmc4 / (ratio + 1) = 100 (0) */ set = MMC4_RATIO(7) | MMC4_PRE_RATIO(0); -- cgit v1.1 From d6d07a9bec3bc30a58c45f8e6343c92dfef96fee Mon Sep 17 00:00:00 2001 From: Stefan Agner Date: Fri, 12 Sep 2014 13:06:36 +0200 Subject: arm: vf610: add NAND support for vf610twr This adds NAND support for the Vybrid tower system (TWR-VF65GS10) provided by the vf610_nfc driver. Full 16-Bit bus width is supported. Also an aditional config vf610twr_nand is introduced which gets the environment from NAND. However, booting U-Boot from NAND is not yet possible due to missing boot configuration block (BCB). Signed-off-by: Stefan Agner --- board/freescale/vf610twr/vf610twr.c | 47 ++++++++++++++++++++++++++++++++++--- 1 file changed, 44 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/freescale/vf610twr/vf610twr.c b/board/freescale/vf610twr/vf610twr.c index 54a9f2c..4d09796 100644 --- a/board/freescale/vf610twr/vf610twr.c +++ b/board/freescale/vf610twr/vf610twr.c @@ -278,6 +278,39 @@ static void setup_iomux_i2c(void) imx_iomux_v3_setup_multiple_pads(i2c0_pads, ARRAY_SIZE(i2c0_pads)); } +#ifdef CONFIG_NAND_VF610_NFC +static void setup_iomux_nfc(void) +{ + static const iomux_v3_cfg_t nfc_pads[] = { + VF610_PAD_PTD31__NF_IO15, + VF610_PAD_PTD30__NF_IO14, + VF610_PAD_PTD29__NF_IO13, + VF610_PAD_PTD28__NF_IO12, + VF610_PAD_PTD27__NF_IO11, + VF610_PAD_PTD26__NF_IO10, + VF610_PAD_PTD25__NF_IO9, + VF610_PAD_PTD24__NF_IO8, + VF610_PAD_PTD23__NF_IO7, + VF610_PAD_PTD22__NF_IO6, + VF610_PAD_PTD21__NF_IO5, + VF610_PAD_PTD20__NF_IO4, + VF610_PAD_PTD19__NF_IO3, + VF610_PAD_PTD18__NF_IO2, + VF610_PAD_PTD17__NF_IO1, + VF610_PAD_PTD16__NF_IO0, + VF610_PAD_PTB24__NF_WE_B, + VF610_PAD_PTB25__NF_CE0_B, + VF610_PAD_PTB27__NF_RE_B, + VF610_PAD_PTC26__NF_RB_B, + VF610_PAD_PTC27__NF_ALE, + VF610_PAD_PTC28__NF_CLE + }; + + imx_iomux_v3_setup_multiple_pads(nfc_pads, ARRAY_SIZE(nfc_pads)); +} +#endif + + static void setup_iomux_qspi(void) { static const iomux_v3_cfg_t qspi0_pads[] = { @@ -354,6 +387,8 @@ static void clock_init(void) CCM_CCGR7_SDHC1_CTRL_MASK); clrsetbits_le32(&ccm->ccgr9, CCM_REG_CTRL_MASK, CCM_CCGR9_FEC0_CTRL_MASK | CCM_CCGR9_FEC1_CTRL_MASK); + clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK, + CCM_CCGR10_NFC_CTRL_MASK); clrsetbits_le32(&anadig->pll2_ctrl, ANADIG_PLL2_CTRL_POWERDOWN, ANADIG_PLL2_CTRL_ENABLE | ANADIG_PLL2_CTRL_DIV_SELECT); @@ -373,14 +408,17 @@ static void clock_init(void) CCM_CACRR_IPG_CLK_DIV(1) | CCM_CACRR_BUS_CLK_DIV(2) | CCM_CACRR_ARM_CLK_DIV(0)); clrsetbits_le32(&ccm->cscmr1, CCM_REG_CTRL_MASK, - CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3)); + CCM_CSCMR1_ESDHC1_CLK_SEL(3) | CCM_CSCMR1_QSPI0_CLK_SEL(3) | + CCM_CSCMR1_NFC_CLK_SEL(0)); clrsetbits_le32(&ccm->cscdr1, CCM_REG_CTRL_MASK, CCM_CSCDR1_RMII_CLK_EN); clrsetbits_le32(&ccm->cscdr2, CCM_REG_CTRL_MASK, - CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0)); + CCM_CSCDR2_ESDHC1_EN | CCM_CSCDR2_ESDHC1_CLK_DIV(0) | + CCM_CSCDR2_NFC_EN); clrsetbits_le32(&ccm->cscdr3, CCM_REG_CTRL_MASK, CCM_CSCDR3_QSPI0_EN | CCM_CSCDR3_QSPI0_DIV(1) | - CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3)); + CCM_CSCDR3_QSPI0_X2_DIV(1) | CCM_CSCDR3_QSPI0_X4_DIV(3) | + CCM_CSCDR3_NFC_PRE_DIV(5)); clrsetbits_le32(&ccm->cscmr2, CCM_REG_CTRL_MASK, CCM_CSCMR2_RMII_CLK_SEL(0)); } @@ -411,6 +449,9 @@ int board_early_init_f(void) setup_iomux_enet(); setup_iomux_i2c(); setup_iomux_qspi(); +#ifdef CONFIG_NAND_VF610_NFC + setup_iomux_nfc(); +#endif return 0; } -- cgit v1.1 From bcaa075a637af55e2d59e7333eddb250758bd545 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 13 Sep 2014 18:21:35 -0300 Subject: mx6sxsabresd: Staticize i2c_pad_info1 i2c_pad_info1 is only used locally, so it can be made static. Fix the following sparse warning: board/freescale/mx6sxsabresd/mx6sxsabresd.c:160:22: warning: symbol 'i2c_pad_info1' was not declared. Should it be static? Signed-off-by: Fabio Estevam --- board/freescale/mx6sxsabresd/mx6sxsabresd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board') diff --git a/board/freescale/mx6sxsabresd/mx6sxsabresd.c b/board/freescale/mx6sxsabresd/mx6sxsabresd.c index 5eaec1b..68d3718 100644 --- a/board/freescale/mx6sxsabresd/mx6sxsabresd.c +++ b/board/freescale/mx6sxsabresd/mx6sxsabresd.c @@ -157,7 +157,7 @@ int board_eth_init(bd_t *bis) #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1 for PMIC */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_GPIO1_IO00__I2C1_SCL | PC, .gpio_mode = MX6_PAD_GPIO1_IO00__GPIO1_IO_0 | PC, -- cgit v1.1 From 067a659317639187fd170f73b10dfc5c2a7df9da Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sat, 13 Sep 2014 18:21:36 -0300 Subject: mx6qsabreauto: Staticize when possible Turn all local symbols into static in order to make sparse happy. Signed-off-by: Fabio Estevam --- board/freescale/mx6qsabreauto/mx6qsabreauto.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'board') diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 928dadf..dd6d2a6 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -50,12 +50,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t const uart4_pads[] = { +static iomux_v3_cfg_t const uart4_pads[] = { MX6_PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t const enet_pads[] = { +static iomux_v3_cfg_t const enet_pads[] = { MX6_PAD_KEY_COL1__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_KEY_COL2__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -74,7 +74,7 @@ iomux_v3_cfg_t const enet_pads[] = { }; /* I2C2 PMIC, iPod, Tuner, Codec, Touch, HDMI EDID, MIPI CSI2 card */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_EIM_EB2__I2C2_SCL | PC, .gpio_mode = MX6_PAD_EIM_EB2__GPIO2_IO30 | PC, @@ -91,7 +91,7 @@ struct i2c_pads_info i2c_pad_info1 = { * I2C3 MLB, Port Expanders (A, B, C), Video ADC, Light Sensor, * Compass Sensor, Accelerometer, Res Touch */ -struct i2c_pads_info i2c_pad_info2 = { +static struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6_PAD_GPIO_3__I2C3_SCL | PC, .gpio_mode = MX6_PAD_GPIO_3__GPIO1_IO03 | PC, @@ -104,11 +104,11 @@ struct i2c_pads_info i2c_pad_info2 = { } }; -iomux_v3_cfg_t const i2c3_pads[] = { +static iomux_v3_cfg_t const i2c3_pads[] = { MX6_PAD_EIM_A24__GPIO5_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const port_exp[] = { +static iomux_v3_cfg_t const port_exp[] = { MX6_PAD_SD2_DAT0__GPIO1_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -117,7 +117,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); } -iomux_v3_cfg_t const usdhc3_pads[] = { +static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -138,7 +138,7 @@ static void setup_iomux_uart(void) } #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg usdhc_cfg[1] = { +static struct fsl_esdhc_cfg usdhc_cfg[1] = { {USDHC3_BASE_ADDR}, }; -- cgit v1.1 From 0fdfafd225a0cead05a0b332f189c2f667b5f1d6 Mon Sep 17 00:00:00 2001 From: Stefano Babic Date: Tue, 16 Sep 2014 16:02:00 +0200 Subject: imx: Fix warning by building vf610twr_nand commit d6d07a9b... arm: vf610: add NAND support for vf610twr generates the following warnings: WARNING: no status info for 'vf610twr_nand' WARNING: no maintainers for 'vf610twr_nand'WARNING: no status info for 'vf610twr_nand' This is due to the fact that vf610twr_nand_defconfig has no Maintainer. This patch proposed Alison as Maintainer and fix it. Signed-off-by: Stefano Babic Acked-by: Alison Wang CC: Stefan Agner --- board/freescale/vf610twr/MAINTAINERS | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/freescale/vf610twr/MAINTAINERS b/board/freescale/vf610twr/MAINTAINERS index 56a09c9..f2997f0 100644 --- a/board/freescale/vf610twr/MAINTAINERS +++ b/board/freescale/vf610twr/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/freescale/vf610twr/ F: include/configs/vf610twr.h F: configs/vf610twr_defconfig +F: configs/vf610twr_nand_defconfig -- cgit v1.1 From 7972913512568bc48ca6ea1f2b1cc25db61275ff Mon Sep 17 00:00:00 2001 From: Nitin Garg Date: Mon, 15 Sep 2014 08:56:46 -0500 Subject: imx: ddr: Move mx6q_4x_mt41j128.cfg to mx6sabresd board Provide cgtqmx6eval board its own variant of ddr setup config file. Move board/freescale/imx/ddr/ mx6q_4x_mt41j128.cfg to board/freescale/mx6sabresd/ as this is was designed for the mx6sabresd board. Signed-off-by: Nitin Garg Acked-by: Stefano Babic --- board/congatec/cgtqmx6eval/imximage.cfg | 169 ++++++++++++++++++++++++ board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg | 169 ------------------------ board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg | 169 ++++++++++++++++++++++++ 3 files changed, 338 insertions(+), 169 deletions(-) create mode 100644 board/congatec/cgtqmx6eval/imximage.cfg delete mode 100644 board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg create mode 100644 board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg (limited to 'board') diff --git a/board/congatec/cgtqmx6eval/imximage.cfg b/board/congatec/cgtqmx6eval/imximage.cfg new file mode 100644 index 0000000..bb6c60b --- /dev/null +++ b/board/congatec/cgtqmx6eval/imximage.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg b/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg deleted file mode 100644 index bb6c60b..0000000 --- a/board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg +++ /dev/null @@ -1,169 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. - * Jason Liu - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Refer doc/README.imximage for more details about how-to configure - * and create imximage boot image - * - * The syntax is taken as close as possible with the kwbimage - */ - -/* image version */ -IMAGE_VERSION 2 - -/* - * Boot Device : one of - * spi, sd (the board has no nand neither onenand) - */ -BOOT_FROM sd - -/* - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ -DATA 4 0x020e05a8 0x00000030 -DATA 4 0x020e05b0 0x00000030 -DATA 4 0x020e0524 0x00000030 -DATA 4 0x020e051c 0x00000030 - -DATA 4 0x020e0518 0x00000030 -DATA 4 0x020e050c 0x00000030 -DATA 4 0x020e05b8 0x00000030 -DATA 4 0x020e05c0 0x00000030 - -DATA 4 0x020e05ac 0x00020030 -DATA 4 0x020e05b4 0x00020030 -DATA 4 0x020e0528 0x00020030 -DATA 4 0x020e0520 0x00020030 - -DATA 4 0x020e0514 0x00020030 -DATA 4 0x020e0510 0x00020030 -DATA 4 0x020e05bc 0x00020030 -DATA 4 0x020e05c4 0x00020030 - -DATA 4 0x020e056c 0x00020030 -DATA 4 0x020e0578 0x00020030 -DATA 4 0x020e0588 0x00020030 -DATA 4 0x020e0594 0x00020030 - -DATA 4 0x020e057c 0x00020030 -DATA 4 0x020e0590 0x00003000 -DATA 4 0x020e0598 0x00003000 -DATA 4 0x020e058c 0x00000000 - -DATA 4 0x020e059c 0x00003030 -DATA 4 0x020e05a0 0x00003030 -DATA 4 0x020e0784 0x00000030 -DATA 4 0x020e0788 0x00000030 - -DATA 4 0x020e0794 0x00000030 -DATA 4 0x020e079c 0x00000030 -DATA 4 0x020e07a0 0x00000030 -DATA 4 0x020e07a4 0x00000030 - -DATA 4 0x020e07a8 0x00000030 -DATA 4 0x020e0748 0x00000030 -DATA 4 0x020e074c 0x00000030 -DATA 4 0x020e0750 0x00020000 - -DATA 4 0x020e0758 0x00000000 -DATA 4 0x020e0774 0x00020000 -DATA 4 0x020e078c 0x00000030 -DATA 4 0x020e0798 0x000C0000 - -DATA 4 0x021b081c 0x33333333 -DATA 4 0x021b0820 0x33333333 -DATA 4 0x021b0824 0x33333333 -DATA 4 0x021b0828 0x33333333 - -DATA 4 0x021b481c 0x33333333 -DATA 4 0x021b4820 0x33333333 -DATA 4 0x021b4824 0x33333333 -DATA 4 0x021b4828 0x33333333 - -DATA 4 0x021b0018 0x00081740 - -DATA 4 0x021b001c 0x00008000 -DATA 4 0x021b000c 0x555A7974 -DATA 4 0x021b0010 0xDB538F64 -DATA 4 0x021b0014 0x01FF00DB -DATA 4 0x021b002c 0x000026D2 - -DATA 4 0x021b0030 0x005A1023 -DATA 4 0x021b0008 0x09444040 -DATA 4 0x021b0004 0x00025576 -DATA 4 0x021b0040 0x00000027 -DATA 4 0x021b0000 0x831A0000 - -DATA 4 0x021b001c 0x04088032 -DATA 4 0x021b001c 0x0408803A -DATA 4 0x021b001c 0x00008033 -DATA 4 0x021b001c 0x0000803B -DATA 4 0x021b001c 0x00428031 -DATA 4 0x021b001c 0x00428039 -DATA 4 0x021b001c 0x19308030 -DATA 4 0x021b001c 0x19308038 - -DATA 4 0x021b001c 0x04008040 -DATA 4 0x021b001c 0x04008048 -DATA 4 0x021b0800 0xA1380003 -DATA 4 0x021b4800 0xA1380003 -DATA 4 0x021b0020 0x00005800 -DATA 4 0x021b0818 0x00022227 -DATA 4 0x021b4818 0x00022227 - -DATA 4 0x021b083c 0x434B0350 -DATA 4 0x021b0840 0x034C0359 -DATA 4 0x021b483c 0x434B0350 -DATA 4 0x021b4840 0x03650348 -DATA 4 0x021b0848 0x4436383B -DATA 4 0x021b4848 0x39393341 -DATA 4 0x021b0850 0x35373933 -DATA 4 0x021b4850 0x48254A36 - -DATA 4 0x021b080c 0x001F001F -DATA 4 0x021b0810 0x001F001F - -DATA 4 0x021b480c 0x00440044 -DATA 4 0x021b4810 0x00440044 - -DATA 4 0x021b08b8 0x00000800 -DATA 4 0x021b48b8 0x00000800 - -DATA 4 0x021b001c 0x00000000 -DATA 4 0x021b0404 0x00011006 - -/* set the default clock gate to save power */ -DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC03 -DATA 4 0x020c4070 0x0FFFC000 -DATA 4 0x020c4074 0x3FF00000 -DATA 4 0x020c4078 0x00FFF300 -DATA 4 0x020c407c 0x0F0000C3 -DATA 4 0x020c4080 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4 0x020e0010 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4 0x020e0018 0x007F007F -DATA 4 0x020e001c 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4 0x020c4060 0x000000fb diff --git a/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg new file mode 100644 index 0000000..bb6c60b --- /dev/null +++ b/board/freescale/mx6sabresd/mx6q_4x_mt41j128.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb -- cgit v1.1 From ca11db2603e58cfee8e64931dcc3c87023ecb1cf Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:42 +0200 Subject: arm: mxs: olinuxino: Enable USB only when needed Enable the power to the USB port only when the USB port is really needed. Do not enable the power unconditionally. Signed-off-by: Marek Vasut Cc: Stefano Babic --- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index e2a03a1..65cbbf1 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -30,13 +30,25 @@ int board_early_init_f(void) /* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0); + return 0; +} + #ifdef CONFIG_CMD_USB - /* Enable LAN9512 */ +int board_ehci_hcd_init(int port) +{ + /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1); -#endif + udelay(100); + return 0; +} +int board_ehci_hcd_exit(int port) +{ + /* Enable LAN9512 (Maxi) or GL850G (Mini) USB HUB power. */ + gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 0); return 0; } +#endif int dram_init(void) { -- cgit v1.1 From 1fb065feae451b8f22cb9b8b156508ea541c36d7 Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 28 Apr 2014 03:38:43 +0200 Subject: arm: mxs: olinuxino: Fine-tune DRAM configuration Add fine-tuning for the DRAM configuration according to the DRAM chip datasheet. THis configuration applies to both Hynix HY5DU12622DTP and Samsung K5H511538J-D43 . Signed-off-by: Marek Vasut Cc: Stefano Babic --- board/olimex/mx23_olinuxino/mx23_olinuxino.c | 30 ++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+) (limited to 'board') diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 65cbbf1..313ab20 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -78,3 +78,33 @@ int board_init(void) return 0; } + +/* Fine-tune the DRAM configuration. */ +void mxs_adjust_memory_params(uint32_t *dram_vals) +{ + /* Enable Auto Precharge. */ + dram_vals[3] |= 1 << 8; + /* Enable Fast Writes. */ + dram_vals[5] |= 1 << 8; + /* tEMRS = 3*tCK */ + dram_vals[10] &= ~(0x3 << 8); + dram_vals[10] |= (0x3 << 8); + /* CASLAT = 3*tCK */ + dram_vals[11] &= ~(0x3 << 0); + dram_vals[11] |= (0x3 << 0); + /* tCKE = 1*tCK */ + dram_vals[12] &= ~(0x7 << 0); + dram_vals[12] |= (0x1 << 0); + /* CASLAT_LIN_GATE = 3*tCK , CASLAT_LIN = 3*tCK, tWTR=2*tCK */ + dram_vals[13] &= ~((0xf << 16) | (0xf << 24) | (0xf << 0)); + dram_vals[13] |= (0x6 << 16) | (0x6 << 24) | (0x2 << 0); + /* tDAL = 6*tCK */ + dram_vals[15] &= ~(0xf << 16); + dram_vals[15] |= (0x6 << 16); + /* tREF = 1040*tCK */ + dram_vals[26] &= ~0xffff; + dram_vals[26] |= 0x0410; + /* tRAS_MAX = 9334*tCK */ + dram_vals[32] &= ~0xffff; + dram_vals[32] |= 0x2475; +} -- cgit v1.1 From b357503f1cdedade6d31991fa6aabb4174f92989 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 29 Sep 2014 23:26:28 +0800 Subject: imx: mx6dlarm2: Add support for i.MX6DL arm2 DDR3 board This patch adds the i.MX6DL arm2 board support. The i.MX6DL ARM2 shared the same board with i.MX6Q ARM2 board since the i.MX6DL is pin-pin compatible with i.MX6Q. The patch also support the DDR 32-BIT mode option. Please define CONFIG_DDR_32BIT in the board configure file to enable DDR 32-BIT mode.But due to the board design, it's 64bit DDR buswidth physically, so, if you CONFIG_DDR_32BIT, the DDR memory size will be half of it. Signed-off-by: Ye.Li --- board/freescale/mx6qarm2/MAINTAINERS | 2 + board/freescale/mx6qarm2/imximage_mx6dl.cfg | 143 ++++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 4 + 3 files changed, 149 insertions(+) create mode 100644 board/freescale/mx6qarm2/imximage_mx6dl.cfg (limited to 'board') diff --git a/board/freescale/mx6qarm2/MAINTAINERS b/board/freescale/mx6qarm2/MAINTAINERS index 42c19d1..c8d594b 100644 --- a/board/freescale/mx6qarm2/MAINTAINERS +++ b/board/freescale/mx6qarm2/MAINTAINERS @@ -1,6 +1,8 @@ MX6QARM2 BOARD M: Jason Liu +M: Ye Li S: Maintained F: board/freescale/mx6qarm2/ F: include/configs/mx6qarm2.h F: configs/mx6qarm2_defconfig +F: configs/mx6dlarm2_defconfig diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg new file mode 100644 index 0000000..eef723c --- /dev/null +++ b/board/freescale/mx6qarm2/imximage_mx6dl.cfg @@ -0,0 +1,143 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e0798 0x000c0000 +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0588 0x00000030 +DATA 4 0x020e0594 0x00000030 +DATA 4 0x020e056c 0x00000030 +DATA 4 0x020e0578 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e057c 0x00000030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0750 0x00020000 +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e05ac 0x00000030 +DATA 4 0x020e05b4 0x00000030 +DATA 4 0x020e0528 0x00000030 +DATA 4 0x020e0520 0x00000030 +DATA 4 0x020e0514 0x00000030 +DATA 4 0x020e0510 0x00000030 +DATA 4 0x020e05bc 0x00000030 +DATA 4 0x020e05c4 0x00000030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F +DATA 4 0x021b480c 0x00370037 +DATA 4 0x021b4810 0x00370037 +DATA 4 0x021b083c 0x422f0220 +DATA 4 0x021b0840 0x021f0219 +DATA 4 0x021b483C 0x422f0220 +DATA 4 0x021b4840 0x022d022f +DATA 4 0x021b0848 0x47494b49 +DATA 4 0x021b4848 0x48484c47 +DATA 4 0x021b0850 0x39382b2f +DATA 4 0x021b4850 0x2f35312c +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 +DATA 4 0x021b0004 0x0002002d +DATA 4 0x021b0008 0x00333030 + +DATA 4 0x021b000c 0x40445323 +DATA 4 0x021b0010 0xb66e8c63 + +DATA 4 0x021b0014 0x01ff00db +DATA 4 0x021b0018 0x00081740 +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b002c 0x000026d2 +DATA 4 0x021b0030 0x00440e21 +#ifdef CONFIG_DDR_32BIT +DATA 4 0x021b0040 0x00000017 +DATA 4 0x021b0000 0xc3190000 +#else +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0xc31a0000 +#endif +DATA 4 0x021b001c 0x04008032 +DATA 4 0x021b001c 0x0400803a +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803b +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x07208030 +DATA 4 0x021b001c 0x07208038 +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00000007 +DATA 4 0x021b4818 0x00000007 +DATA 4 0x021b0004 0x0002556d +DATA 4 0x021b4004 0x00011006 +DATA 4 0x021b001c 0x00000000 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +DATA 4 0x020e0010 0xF00000CF +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index 6c51f3a..f2e577d 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -224,7 +224,11 @@ int board_init(void) int checkboard(void) { +#ifdef CONFIG_MX6DL + puts("Board: MX6DL-Armadillo2\n"); +#else puts("Board: MX6Q-Armadillo2\n"); +#endif return 0; } -- cgit v1.1 From 661139faf7b03a8d88da55ee36ad4b0fb7e35964 Mon Sep 17 00:00:00 2001 From: "Ye.Li" Date: Mon, 29 Sep 2014 23:26:29 +0800 Subject: imx: mx6dlarm2: Add support for i.MX6Q/DL arm2 LPDDR2 boards Update the ddr scripts for LPDDR2 and add two build configs for LPDDR2 arm2 board. Since the LPDDR2 arm2 board has different DDR size, use CONFIG_DDR_MB in defconfig to replace the PHYS_SDRAM_SIZE. Signed-off-by: Ye.Li --- board/freescale/mx6qarm2/MAINTAINERS | 2 + board/freescale/mx6qarm2/imximage.cfg | 189 +++++++++++++++- board/freescale/mx6qarm2/imximage_mx6dl.cfg | 319 ++++++++++++++++++++++++++++ board/freescale/mx6qarm2/mx6qarm2.c | 7 +- 4 files changed, 510 insertions(+), 7 deletions(-) (limited to 'board') diff --git a/board/freescale/mx6qarm2/MAINTAINERS b/board/freescale/mx6qarm2/MAINTAINERS index c8d594b..52cf7f9 100644 --- a/board/freescale/mx6qarm2/MAINTAINERS +++ b/board/freescale/mx6qarm2/MAINTAINERS @@ -6,3 +6,5 @@ F: board/freescale/mx6qarm2/ F: include/configs/mx6qarm2.h F: configs/mx6qarm2_defconfig F: configs/mx6dlarm2_defconfig +F: configs/mx6qarm2_lpddr2_defconfig +F: configs/mx6dlarm2_lpddr2_defconfig diff --git a/board/freescale/mx6qarm2/imximage.cfg b/board/freescale/mx6qarm2/imximage.cfg index 710f34d..c85bde5 100644 --- a/board/freescale/mx6qarm2/imximage.cfg +++ b/board/freescale/mx6qarm2/imximage.cfg @@ -1,5 +1,5 @@ /* - * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Copyright (C) 2011-2014 Freescale Semiconductor, Inc. * Jason Liu * * SPDX-License-Identifier: GPL-2.0+ @@ -30,6 +30,185 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ +#ifdef CONFIG_MX6DQ_LPDDR2 +/* DCD */ +DATA 4 0x020C4018 0x60324 + +DATA 4 0x020E05a8 0x00003038 +DATA 4 0x020E05b0 0x00003038 +DATA 4 0x020E0524 0x00003038 +DATA 4 0x020E051c 0x00003038 + +DATA 4 0x020E0518 0x00003038 +DATA 4 0x020E050c 0x00003038 +DATA 4 0x020E05b8 0x00003038 +DATA 4 0x020E05c0 0x00003038 + +DATA 4 0x020E05ac 0x00000038 +DATA 4 0x020E05b4 0x00000038 +DATA 4 0x020E0528 0x00000038 +DATA 4 0x020E0520 0x00000038 + +DATA 4 0x020E0514 0x00000038 +DATA 4 0x020E0510 0x00000038 +DATA 4 0x020E05bc 0x00000038 +DATA 4 0x020E05c4 0x00000038 + +DATA 4 0x020E056c 0x00000038 +DATA 4 0x020E0578 0x00000038 +DATA 4 0x020E0588 0x00000038 +DATA 4 0x020E0594 0x00000038 + +DATA 4 0x020E057c 0x00000038 +DATA 4 0x020E0590 0x00000038 +DATA 4 0x020E0598 0x00000038 +DATA 4 0x020E058c 0x00000000 + +DATA 4 0x020E059c 0x00000038 +DATA 4 0x020E05a0 0x00000038 +DATA 4 0x020E0784 0x00000038 +DATA 4 0x020E0788 0x00000038 + +DATA 4 0x020E0794 0x00000038 +DATA 4 0x020E079c 0x00000038 +DATA 4 0x020E07a0 0x00000038 +DATA 4 0x020E07a4 0x00000038 + +DATA 4 0x020E07a8 0x00000038 +DATA 4 0x020E0748 0x00000038 +DATA 4 0x020E074c 0x00000038 +DATA 4 0x020E0750 0x00020000 + +DATA 4 0x020E0758 0x00000000 +DATA 4 0x020E0774 0x00020000 +DATA 4 0x020E078c 0x00000038 +DATA 4 0x020E0798 0x00080000 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b401c 0x00008000 + +DATA 4 0x021b085c 0x1b5f01ff +DATA 4 0x021b485c 0x1b5f01ff + +DATA 4 0x021b0800 0xa1390000 +DATA 4 0x021b4800 0xa1390000 + +DATA 4 0x021b0890 0x00400000 +DATA 4 0x021b4890 0x00400000 + +DATA 4 0x021b48bc 0x00055555 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b082c 0xf3333333 +DATA 4 0x021b0830 0xf3333333 +DATA 4 0x021b0834 0xf3333333 +DATA 4 0x021b0838 0xf3333333 +DATA 4 0x021b482c 0xf3333333 +DATA 4 0x021b4830 0xf3333333 +DATA 4 0x021b4834 0xf3333333 +DATA 4 0x021b4838 0xf3333333 + +DATA 4 0x021b0848 0x49383b39 +DATA 4 0x021b0850 0x30364738 +DATA 4 0x021b4848 0x3e3c3846 +DATA 4 0x021b4850 0x4c294b35 + +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x0 +DATA 4 0x021b483c 0x20000000 +DATA 4 0x021b4840 0x0 + +DATA 4 0x021b0858 0xf00 +DATA 4 0x021b4858 0xf00 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b000c 0x555a61a5 +DATA 4 0x021b0004 0x20036 +DATA 4 0x021b0010 0x160e83 +DATA 4 0x021b0014 0xdd +DATA 4 0x021b0018 0x8174c +DATA 4 0x021b002c 0xf9f26d2 +DATA 4 0x021b0030 0x20e +DATA 4 0x021b0038 0x200aac +DATA 4 0x021b0008 0x0 + +DATA 4 0x021b0040 0x5f + +DATA 4 0x021b0000 0xc3010000 + +DATA 4 0x021b400c 0x555a61a5 +DATA 4 0x021b4004 0x20036 +DATA 4 0x021b4010 0x160e83 +DATA 4 0x021b4014 0xdd +DATA 4 0x021b4018 0x8174c +DATA 4 0x021b402c 0xf9f26d2 +DATA 4 0x021b4030 0x20e +DATA 4 0x021b4038 0x200aac +DATA 4 0x021b4008 0x0 + +DATA 4 0x021b4040 0x3f +DATA 4 0x021b4000 0xc3010000 + +DATA 4 0x021b001c 0x3f8030 +DATA 4 0x021b001c 0xff0a8030 +DATA 4 0x021b001c 0xc2018030 +DATA 4 0x021b001c 0x6028030 +DATA 4 0x021b001c 0x2038030 + +DATA 4 0x021b401c 0x3f8030 +DATA 4 0x021b401c 0xff0a8030 +DATA 4 0x021b401c 0xc2018030 +DATA 4 0x021b401c 0x6028030 +DATA 4 0x021b401c 0x2038030 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b0020 0x7800 +DATA 4 0x021b4020 0x7800 + +DATA 4 0x021b0818 0x0 +DATA 4 0x021b4818 0x0 + +DATA 4 0x021b0800 0xa1390003 +DATA 4 0x021b4800 0xa1390003 + +DATA 4 0x021b08b8 0x800 +DATA 4 0x021b48b8 0x800 + +DATA 4 0x021b001c 0x0 +DATA 4 0x021b401c 0x0 + +DATA 4 0x021b0404 0x00011006 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +#else DATA 4 0x020e05a8 0x00000030 DATA 4 0x020e05b0 0x00000030 DATA 4 0x020e0524 0x00000030 @@ -142,12 +321,8 @@ DATA 4 0x021b48b8 0x00000800 DATA 4 0x021b001c 0x00000000 DATA 4 0x021b0404 0x00011006 -DATA 4 0x020e0010 0xF00000FF -DATA 4 0x020e0018 0x00070007 -DATA 4 0x020e001c 0x00070007 - DATA 4 0x020c4068 0x00C03F3F -DATA 4 0x020c406c 0x0030FC00 +DATA 4 0x020c406c 0x0030FC03 DATA 4 0x020c4070 0x0FFFC000 DATA 4 0x020c4074 0x3FF00000 DATA 4 0x020c4078 0x00FFF300 @@ -159,3 +334,5 @@ DATA 4 0x020e0010 0xF00000CF /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F + +#endif /* CONFIG_MX6DQ_LPDDR2 */ diff --git a/board/freescale/mx6qarm2/imximage_mx6dl.cfg b/board/freescale/mx6qarm2/imximage_mx6dl.cfg index eef723c..ae8dcc6 100644 --- a/board/freescale/mx6qarm2/imximage_mx6dl.cfg +++ b/board/freescale/mx6qarm2/imximage_mx6dl.cfg @@ -30,6 +30,324 @@ BOOT_FROM sd * Address absolute address of the register * value value to be stored in the register */ + + + +#ifdef CONFIG_MX6DL_LPDDR2 + +/* IOMUX SETTINGS */ +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS0 */ +DATA 4 0x020E04bc 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS1 */ +DATA 4 0x020E04c0 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS2 */ +DATA 4 0x020E04c4 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS3 */ +DATA 4 0x020E04c8 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS4 */ +DATA 4 0x020E04cc 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS5 */ +DATA 4 0x020E04d0 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS6 */ +DATA 4 0x020E04d4 0x00003028 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDQS7 */ +DATA 4 0x020E04d8 0x00003028 + +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM0 */ +DATA 4 0x020E0470 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM1 */ +DATA 4 0x020E0474 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM2 */ +DATA 4 0x020E0478 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM3 */ +DATA 4 0x020E047c 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM4 */ +DATA 4 0x020E0480 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM5 */ +DATA 4 0x020E0484 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM6 */ +DATA 4 0x020E0488 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_DQM7 */ +DATA 4 0x020E048c 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_CAS */ +DATA 4 0x020E0464 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RAS */ +DATA 4 0x020E0490 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_0 */ +DATA 4 0x020E04ac 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCLK_1 */ +DATA 4 0x020E04b0 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_RESET */ +DATA 4 0x020E0494 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE0 */ +DATA 4 0x020E04a4 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDCKE1 */ +DATA 4 0x020E04a8 0x00000038 +/* + * IOMUXC_SW_PAD_CTL_PAD_DRAM_SDBA2 + * DSE can be configured using Group Control Register: + * IOMUXC_SW_PAD_CTL_GRP_CTLDS + */ +DATA 4 0x020E04a0 0x00000000 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT0 */ +DATA 4 0x020E04b4 0x00000038 +/* IOMUXC_SW_PAD_CTL_PAD_DRAM_SDODT1 */ +DATA 4 0x020E04b8 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B0DS */ +DATA 4 0x020E0764 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B1DS */ +DATA 4 0x020E0770 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B2DS */ +DATA 4 0x020E0778 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B3DS */ +DATA 4 0x020E077c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B4DS */ +DATA 4 0x020E0780 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B5DS */ +DATA 4 0x020E0784 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B6DS */ +DATA 4 0x020E078c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_B7DS */ +DATA 4 0x020E0748 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_ADDDS */ +DATA 4 0x020E074c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_CTLDS */ +DATA 4 0x020E076c 0x00000038 +/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE_CTL */ +DATA 4 0x020E0750 0x00020000 +/* IOMUXC_SW_PAD_CTL_GRP_DDRPKE */ +DATA 4 0x020E0754 0x00000000 +/* IOMUXC_SW_PAD_CTL_GRP_DDRMODE */ +DATA 4 0x020E0760 0x00020000 +/* IOMUXC_SW_PAD_CTL_GRP_DDR_TYPE */ +DATA 4 0x020E0774 0x00080000 + +/* + * DDR Controller Registers + * + * Manufacturer: Mocron + * Device Part Number: MT42L64M64D2KH-18 + * Clock Freq.: 528MHz + * MMDC channels: Both MMDC0, MMDC1 + *Density per CS in Gb: 256M + * Chip Selects used: 2 + * Number of Banks: 8 + * Row address: 14 + * Column address: 9 + * Data bus width 32 + */ + +/* MMDC_P0_BASE_ADDR = 0x021b0000 */ +/* MMDC_P1_BASE_ADDR = 0x021b4000 */ + +/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */ +DATA 4 0x021b001c 0x00008000 + +/* MMDC0_MDSCR, set the Configuration request bit during MMDC set up */ +DATA 4 0x021b401c 0x00008000 + +/*LPDDR2 ZQ params */ +DATA 4 0x021b085c 0x1b5f01ff +DATA 4 0x021b485c 0x1b5f01ff + +/* Calibration setup. */ +/* DDR_PHY_P0_MPZQHWCTRL, enable on time ZQ calibration */ +DATA 4 0x021b0800 0xa1390003 + +/*ca bus abs delay */ +DATA 4 0x021b0890 0x00400000 +/*ca bus abs delay */ +DATA 4 0x021b4890 0x00400000 +/* values of 20,40,50,60,7f tried. no difference seen */ + +/* DDR_PHY_P1_MPWRCADL */ +DATA 4 0x021b48bc 0x00055555 + +/*frc_msr.*/ +DATA 4 0x021b08b8 0x00000800 +/*frc_msr.*/ +DATA 4 0x021b48b8 0x00000800 + +/* DDR_PHY_P0_MPREDQBY0DL3 */ +DATA 4 0x021b081c 0x33333333 +/* DDR_PHY_P0_MPREDQBY1DL3 */ +DATA 4 0x021b0820 0x33333333 +/* DDR_PHY_P0_MPREDQBY2DL3 */ +DATA 4 0x021b0824 0x33333333 +/* DDR_PHY_P0_MPREDQBY3DL3 */ +DATA 4 0x021b0828 0x33333333 +/* DDR_PHY_P1_MPREDQBY0DL3 */ +DATA 4 0x021b481c 0x33333333 +/* DDR_PHY_P1_MPREDQBY1DL3 */ +DATA 4 0x021b4820 0x33333333 +/* DDR_PHY_P1_MPREDQBY2DL3 */ +DATA 4 0x021b4824 0x33333333 +/* DDR_PHY_P1_MPREDQBY3DL3 */ +DATA 4 0x021b4828 0x33333333 + +/* + * Read and write data delay, per byte. + * For optimized DDR operation it is recommended to run mmdc_calibration + * on your board, and replace 4 delay register assigns with resulted values + * Note: + * a. DQS gating is not relevant for LPDDR2. DSQ gating calibration section + * should be skipped, or the write/read calibration comming after that + * will stall + * b. The calibration code that runs for both MMDC0 & MMDC1 should be used. + */ + +DATA 4 0x021b0848 0x4b4b524f +DATA 4 0x021b4848 0x494f4c44 + +DATA 4 0x021b0850 0x3c3d303c +DATA 4 0x021b4850 0x3c343d38 + +/*dqs gating dis */ +DATA 4 0x021b083c 0x20000000 +DATA 4 0x021b0840 0x0 +DATA 4 0x021b483c 0x20000000 +DATA 4 0x021b4840 0x0 + +/*clk delay */ +DATA 4 0x021b0858 0xa00 +/*clk delay */ +DATA 4 0x021b4858 0xa00 + +/*frc_msr */ +DATA 4 0x021b08b8 0x00000800 +/*frc_msr */ +DATA 4 0x021b48b8 0x00000800 +/* Calibration setup end */ + +/* Channel0 - startng address 0x80000000 */ +/* MMDC0_MDCFG0 */ +DATA 4 0x021b000c 0x34386145 + +/* MMDC0_MDPDC */ +DATA 4 0x021b0004 0x00020036 +/* MMDC0_MDCFG1 */ +DATA 4 0x021b0010 0x00100c83 +/* MMDC0_MDCFG2 */ +DATA 4 0x021b0014 0x000000Dc +/* MMDC0_MDMISC */ +DATA 4 0x021b0018 0x0000174C +/* MMDC0_MDRWD;*/ +DATA 4 0x021b002c 0x0f9f26d2 +/* MMDC0_MDOR */ +DATA 4 0x021b0030 0x0000020e +/* MMDC0_MDCFG3LP */ +DATA 4 0x021b0038 0x00190778 +/* MMDC0_MDOTC */ +DATA 4 0x021b0008 0x00000000 + +/* CS0_END */ +DATA 4 0x021b0040 0x0000005f +/* ROC */ +DATA 4 0x021b0404 0x0000000f + +/* MMDC0_MDCTL */ +DATA 4 0x021b0000 0xc3010000 + +/* Channel1 - starting address 0x10000000 */ +/* MMDC1_MDCFG0 */ +DATA 4 0x021b400c 0x34386145 + +/* MMDC1_MDPDC */ +DATA 4 0x021b4004 0x00020036 +/* MMDC1_MDCFG1 */ +DATA 4 0x021b4010 0x00100c83 +/* MMDC1_MDCFG2 */ +DATA 4 0x021b4014 0x000000Dc +/* MMDC1_MDMISC */ +DATA 4 0x021b4018 0x0000174C +/* MMDC1_MDRWD;*/ +DATA 4 0x021b402c 0x0f9f26d2 +/* MMDC1_MDOR */ +DATA 4 0x021b4030 0x0000020e +/* MMDC1_MDCFG3LP */ +DATA 4 0x021b4038 0x00190778 +/* MMDC1_MDOTC */ +DATA 4 0x021b4008 0x00000000 + +/* CS0_END */ +DATA 4 0x021b4040 0x0000003f + +/* MMDC1_MDCTL */ +DATA 4 0x021b4000 0xc3010000 + +/* Channel0 : Configure DDR device:*/ +/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */ +DATA 4 0x021b001c 0x003f8030 +/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */ +DATA 4 0x021b001c 0xff0a8030 +/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */ +DATA 4 0x021b001c 0xa2018030 +/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */ +DATA 4 0x021b001c 0x06028030 +/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */ +DATA 4 0x021b001c 0x01038030 + +/* Channel1 : Configure DDR device:*/ +/* MRW: BA=0 CS=0 MR_ADDR=63 MR_OP=0 */ +DATA 4 0x021b401c 0x003f8030 +/* MRW: BA=0 CS=0 MR_ADDR=10 MR_OP=ff */ +DATA 4 0x021b401c 0xff0a8030 +/* MRW: BA=0 CS=0 MR_ADDR=1 MR_OP=a2 */ +DATA 4 0x021b401c 0xa2018030 +/* MRW: BA=0 CS=0 MR_ADDR=2 MR_OP=6. tcl=8, tcwl=4 */ +DATA 4 0x021b401c 0x06028030 +/* MRW: BA=0 CS=0 MR_ADDR=3 MR_OP=2.drive=240/6 */ +DATA 4 0x021b401c 0x01038030 + +/* MMDC0_MDREF */ +DATA 4 0x021b0020 0x00005800 +/* MMDC1_MDREF */ +DATA 4 0x021b4020 0x00005800 + +/* DDR_PHY_P0_MPODTCTRL */ +DATA 4 0x021b0818 0x0 +/* DDR_PHY_P1_MPODTCTRL */ +DATA 4 0x021b4818 0x0 + +/* + * calibration values based on calibration compare of 0x00ffff00: + * Note, these calibration values are based on Freescale's board + * May need to run calibration on target board to fine tune these + */ + +/* DDR_PHY_P0_MPZQHWCTRL, enable automatic ZQ calibration */ +DATA 4 0x021b0800 0xa1310003 + +/* DDR_PHY_P0_MPMUR0, frc_msr */ +DATA 4 0x021b08b8 0x00000800 +/* DDR_PHY_P1_MPMUR0, frc_msr */ +DATA 4 0x021b48b8 0x00000800 + +/* + * MMDC0_MDSCR, clear this register + * (especially the configuration bit as initialization is complete) + */ +DATA 4 0x021b001c 0x00000000 +/* + * MMDC0_MDSCR, clear this register + * (especially the configuration bit as initialization is complete) + */ +DATA 4 0x021b401c 0x00000000 + +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +DATA 4 0x020e0010 0xF00000CF +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +#else /* CONFIG_MX6DL_LPDDR2 */ + DATA 4 0x020e0798 0x000c0000 DATA 4 0x020e0758 0x00000000 DATA 4 0x020e0588 0x00000030 @@ -141,3 +459,4 @@ DATA 4 0x020c4080 0x000003FF DATA 4 0x020e0010 0xF00000CF DATA 4 0x020e0018 0x007F007F DATA 4 0x020e001c 0x007F007F +#endif /* CONFIG_MX6DL_LPDDR2 */ diff --git a/board/freescale/mx6qarm2/mx6qarm2.c b/board/freescale/mx6qarm2/mx6qarm2.c index f2e577d..667dca5 100644 --- a/board/freescale/mx6qarm2/mx6qarm2.c +++ b/board/freescale/mx6qarm2/mx6qarm2.c @@ -32,7 +32,12 @@ DECLARE_GLOBAL_DATA_PTR; int dram_init(void) { - gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); +#if defined(CONFIG_MX6DL) && !defined(CONFIG_MX6DL_LPDDR2) && \ + defined(CONFIG_DDR_32BIT) + gd->ram_size = ((phys_size_t)CONFIG_DDR_MB * 1024 * 1024) / 2; +#else + gd->ram_size = (phys_size_t)CONFIG_DDR_MB * 1024 * 1024; +#endif return 0; } -- cgit v1.1 From 1dd42e313b1b7416d756d9fd9899b300fd238793 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 30 Sep 2014 12:41:17 +0200 Subject: ARM: mx6: gw_ventana: Remove superfluous memset of GD in board_init_f Zeroing GD in board_init_f() is not needed any more. As its now done in crt0.S. The patch that clears the GD in crt0.S is this one: aae2aef9 [arm: Set up global data before board_init_f()] from Simon. Signed-off-by: Stefan Roese Cc: Tim Harvey Cc: Stefano Babic Acked-by: Tim Harvey --- board/gateworks/gw_ventana/gw_ventana_spl.c | 7 ------- 1 file changed, 7 deletions(-) (limited to 'board') diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index 9fc253b..ca35b3c 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -402,13 +402,6 @@ void board_init_f(ulong dummy) struct ventana_board_info ventana_info; int board_model; - /* - * Zero out global data: - * - this shoudl be done by crt0.S - * - failure to zero it will cause i2c_setup to fail - */ - memset((void *)gd, 0, sizeof(struct global_data)); - /* setup AIPS and disable watchdog */ arch_cpu_init(); -- cgit v1.1 From ba743ac5c123d4a3491a995e20b930989d485795 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Wed, 1 Oct 2014 18:33:48 -0700 Subject: nitrogen6x: Update DDR timings for 2G memory arrangement Update DDR calibration settings based on a larger test set. The initial values were gathered on a small number of boards, and have been found to fail on some boards under load. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg index bb5716e..1096f77 100644 --- a/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg +++ b/board/boundary/nitrogen6x/1066mhz_4x256mx16.cfg @@ -24,18 +24,18 @@ DATA 4, MX6_MMDC_P1_MPZQHWCTRL, 0xA1390003 DATA 4, MX6_MMDC_P0_MDREF, 0x00007800 DATA 4, MX6_MMDC_P0_MPODTCTRL, 0x00022227 DATA 4, MX6_MMDC_P1_MPODTCTRL, 0x00022227 -DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x43040319 -DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x03040279 -DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x43040321 -DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x03030251 -DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x4d434248 -DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c4d -DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x34424543 -DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x49324933 -DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x001a0017 -DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x001F001F -DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x00170027 -DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000a001f +DATA 4, MX6_MMDC_P0_MPDGCTRL0, 0x42740304 +DATA 4, MX6_MMDC_P0_MPDGCTRL1, 0x026e0265 +DATA 4, MX6_MMDC_P1_MPDGCTRL0, 0x02750306 +DATA 4, MX6_MMDC_P1_MPDGCTRL1, 0x02720244 +DATA 4, MX6_MMDC_P0_MPRDDLCTL, 0x463d4041 +DATA 4, MX6_MMDC_P1_MPRDDLCTL, 0x42413c47 +DATA 4, MX6_MMDC_P0_MPWRDLCTL, 0x37414441 +DATA 4, MX6_MMDC_P1_MPWRDLCTL, 0x4633473b +DATA 4, MX6_MMDC_P0_MPWLDECTRL0, 0x0025001f +DATA 4, MX6_MMDC_P0_MPWLDECTRL1, 0x00290027 +DATA 4, MX6_MMDC_P1_MPWLDECTRL0, 0x001f002b +DATA 4, MX6_MMDC_P1_MPWLDECTRL1, 0x000f0029 DATA 4, MX6_MMDC_P0_MPMUR0, 0x00000800 DATA 4, MX6_MMDC_P1_MPMUR0, 0x00000800 DATA 4, MX6_MMDC_P0_MDSCR, 0x00000000 -- cgit v1.1 From 39d0973300b83c08f3f5047245ebf1de883b31f2 Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Thu, 2 Oct 2014 13:33:46 +0200 Subject: imx6: add Bachmann OT1200 board This patch adds support for the OT1200 series of devices. Following components are used in u-boot: + ethernet + i2c + emmc + gpio For more details see README. Changes v1 > v2 - make use of enable_cspi_clock(..) - fix usage of OUTPUT_40OHM define - added README Changes v2 > v3 - improve spelling in README - added own copy of mx6q_4x_mt41j128.cfg Signed-off-by: Christian Gmeiner --- board/bachmann/ot1200/Kconfig | 23 +++ board/bachmann/ot1200/MAINTAINERS | 6 + board/bachmann/ot1200/Makefile | 9 ++ board/bachmann/ot1200/README | 20 +++ board/bachmann/ot1200/mx6q_4x_mt41j128.cfg | 169 +++++++++++++++++++ board/bachmann/ot1200/ot1200.c | 251 +++++++++++++++++++++++++++++ 6 files changed, 478 insertions(+) create mode 100644 board/bachmann/ot1200/Kconfig create mode 100644 board/bachmann/ot1200/MAINTAINERS create mode 100644 board/bachmann/ot1200/Makefile create mode 100644 board/bachmann/ot1200/README create mode 100644 board/bachmann/ot1200/mx6q_4x_mt41j128.cfg create mode 100644 board/bachmann/ot1200/ot1200.c (limited to 'board') diff --git a/board/bachmann/ot1200/Kconfig b/board/bachmann/ot1200/Kconfig new file mode 100644 index 0000000..55a825d --- /dev/null +++ b/board/bachmann/ot1200/Kconfig @@ -0,0 +1,23 @@ +if TARGET_OT1200 + +config SYS_CPU + string + default "armv7" + +config SYS_BOARD + string + default "ot1200" + +config SYS_VENDOR + string + default "bachmann" + +config SYS_SOC + string + default "mx6" + +config SYS_CONFIG_NAME + string + default "ot1200" + +endif diff --git a/board/bachmann/ot1200/MAINTAINERS b/board/bachmann/ot1200/MAINTAINERS new file mode 100644 index 0000000..ad75c24 --- /dev/null +++ b/board/bachmann/ot1200/MAINTAINERS @@ -0,0 +1,6 @@ +BACHMANN ELECTRONIC OT1200 BOARD +M: Christian Gmeiner +S: Maintained +F: board/bachmann/ot1200 +F: include/configs/ot1200.h +F: configs/ot1200*_defconfig diff --git a/board/bachmann/ot1200/Makefile b/board/bachmann/ot1200/Makefile new file mode 100644 index 0000000..1bd42e8 --- /dev/null +++ b/board/bachmann/ot1200/Makefile @@ -0,0 +1,9 @@ +# +# Copyright (C) 2012-2013, Guennadi Liakhovetski +# (C) Copyright 2012-2013 Freescale Semiconductor, Inc. +# Copyright (C) 2013, Boundary Devices +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y := ot1200.o diff --git a/board/bachmann/ot1200/README b/board/bachmann/ot1200/README new file mode 100644 index 0000000..c03d44e --- /dev/null +++ b/board/bachmann/ot1200/README @@ -0,0 +1,20 @@ +U-Boot for the Bachmann electronic GmbH OT1200 devices + +There are two different versions of the base board, which differ +in the way ethernet is done. The variant detection is done during +runtime based on the address of the found phy. + +- "mr" variant +FEC is connected directly to an ethernet switch (KSZ8895). The ethernet +port is always up and auto-negotiation is not possible. + +- normal variant +FEC is connected to a normal phy and auto-negotiation is possible. + + +The variant name is part of the dtb file name loaded by u-boot. This +make is possible to boot the linux kernel and make use variant specific +devicetree (fixed-phy link). + +In order to support different display resoltuions/sizes the OT1200 devices +are making use of EDID data stored in an i2c EEPROM. diff --git a/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg b/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg new file mode 100644 index 0000000..bb6c60b --- /dev/null +++ b/board/bachmann/ot1200/mx6q_4x_mt41j128.cfg @@ -0,0 +1,169 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. + * Jason Liu + * + * SPDX-License-Identifier: GPL-2.0+ + * + * Refer doc/README.imximage for more details about how-to configure + * and create imximage boot image + * + * The syntax is taken as close as possible with the kwbimage + */ + +/* image version */ +IMAGE_VERSION 2 + +/* + * Boot Device : one of + * spi, sd (the board has no nand neither onenand) + */ +BOOT_FROM sd + +/* + * Device Configuration Data (DCD) + * + * Each entry must have the format: + * Addr-type Address Value + * + * where: + * Addr-type register length (1,2 or 4 bytes) + * Address absolute address of the register + * value value to be stored in the register + */ +DATA 4 0x020e05a8 0x00000030 +DATA 4 0x020e05b0 0x00000030 +DATA 4 0x020e0524 0x00000030 +DATA 4 0x020e051c 0x00000030 + +DATA 4 0x020e0518 0x00000030 +DATA 4 0x020e050c 0x00000030 +DATA 4 0x020e05b8 0x00000030 +DATA 4 0x020e05c0 0x00000030 + +DATA 4 0x020e05ac 0x00020030 +DATA 4 0x020e05b4 0x00020030 +DATA 4 0x020e0528 0x00020030 +DATA 4 0x020e0520 0x00020030 + +DATA 4 0x020e0514 0x00020030 +DATA 4 0x020e0510 0x00020030 +DATA 4 0x020e05bc 0x00020030 +DATA 4 0x020e05c4 0x00020030 + +DATA 4 0x020e056c 0x00020030 +DATA 4 0x020e0578 0x00020030 +DATA 4 0x020e0588 0x00020030 +DATA 4 0x020e0594 0x00020030 + +DATA 4 0x020e057c 0x00020030 +DATA 4 0x020e0590 0x00003000 +DATA 4 0x020e0598 0x00003000 +DATA 4 0x020e058c 0x00000000 + +DATA 4 0x020e059c 0x00003030 +DATA 4 0x020e05a0 0x00003030 +DATA 4 0x020e0784 0x00000030 +DATA 4 0x020e0788 0x00000030 + +DATA 4 0x020e0794 0x00000030 +DATA 4 0x020e079c 0x00000030 +DATA 4 0x020e07a0 0x00000030 +DATA 4 0x020e07a4 0x00000030 + +DATA 4 0x020e07a8 0x00000030 +DATA 4 0x020e0748 0x00000030 +DATA 4 0x020e074c 0x00000030 +DATA 4 0x020e0750 0x00020000 + +DATA 4 0x020e0758 0x00000000 +DATA 4 0x020e0774 0x00020000 +DATA 4 0x020e078c 0x00000030 +DATA 4 0x020e0798 0x000C0000 + +DATA 4 0x021b081c 0x33333333 +DATA 4 0x021b0820 0x33333333 +DATA 4 0x021b0824 0x33333333 +DATA 4 0x021b0828 0x33333333 + +DATA 4 0x021b481c 0x33333333 +DATA 4 0x021b4820 0x33333333 +DATA 4 0x021b4824 0x33333333 +DATA 4 0x021b4828 0x33333333 + +DATA 4 0x021b0018 0x00081740 + +DATA 4 0x021b001c 0x00008000 +DATA 4 0x021b000c 0x555A7974 +DATA 4 0x021b0010 0xDB538F64 +DATA 4 0x021b0014 0x01FF00DB +DATA 4 0x021b002c 0x000026D2 + +DATA 4 0x021b0030 0x005A1023 +DATA 4 0x021b0008 0x09444040 +DATA 4 0x021b0004 0x00025576 +DATA 4 0x021b0040 0x00000027 +DATA 4 0x021b0000 0x831A0000 + +DATA 4 0x021b001c 0x04088032 +DATA 4 0x021b001c 0x0408803A +DATA 4 0x021b001c 0x00008033 +DATA 4 0x021b001c 0x0000803B +DATA 4 0x021b001c 0x00428031 +DATA 4 0x021b001c 0x00428039 +DATA 4 0x021b001c 0x19308030 +DATA 4 0x021b001c 0x19308038 + +DATA 4 0x021b001c 0x04008040 +DATA 4 0x021b001c 0x04008048 +DATA 4 0x021b0800 0xA1380003 +DATA 4 0x021b4800 0xA1380003 +DATA 4 0x021b0020 0x00005800 +DATA 4 0x021b0818 0x00022227 +DATA 4 0x021b4818 0x00022227 + +DATA 4 0x021b083c 0x434B0350 +DATA 4 0x021b0840 0x034C0359 +DATA 4 0x021b483c 0x434B0350 +DATA 4 0x021b4840 0x03650348 +DATA 4 0x021b0848 0x4436383B +DATA 4 0x021b4848 0x39393341 +DATA 4 0x021b0850 0x35373933 +DATA 4 0x021b4850 0x48254A36 + +DATA 4 0x021b080c 0x001F001F +DATA 4 0x021b0810 0x001F001F + +DATA 4 0x021b480c 0x00440044 +DATA 4 0x021b4810 0x00440044 + +DATA 4 0x021b08b8 0x00000800 +DATA 4 0x021b48b8 0x00000800 + +DATA 4 0x021b001c 0x00000000 +DATA 4 0x021b0404 0x00011006 + +/* set the default clock gate to save power */ +DATA 4 0x020c4068 0x00C03F3F +DATA 4 0x020c406c 0x0030FC03 +DATA 4 0x020c4070 0x0FFFC000 +DATA 4 0x020c4074 0x3FF00000 +DATA 4 0x020c4078 0x00FFF300 +DATA 4 0x020c407c 0x0F0000C3 +DATA 4 0x020c4080 0x000003FF + +/* enable AXI cache for VDOA/VPU/IPU */ +DATA 4 0x020e0010 0xF00000CF +/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ +DATA 4 0x020e0018 0x007F007F +DATA 4 0x020e001c 0x007F007F + +/* + * Setup CCM_CCOSR register as follows: + * + * cko1_en = 1 --> CKO1 enabled + * cko1_div = 111 --> divide by 8 + * cko1_sel = 1011 --> ahb_clk_root + * + * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz + */ +DATA 4 0x020c4060 0x000000fb diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c new file mode 100644 index 0000000..0d5ede5 --- /dev/null +++ b/board/bachmann/ot1200/ot1200.c @@ -0,0 +1,251 @@ +/* + * Copyright (C) 2010-2013 Freescale Semiconductor, Inc. + * Copyright (C) 2014, Bachmann electronic GmbH + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define OUTPUT_40OHM (PAD_CTL_SPEED_MED|PAD_CTL_DSE_40ohm) + +#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \ + OUTPUT_40OHM | PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \ + PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \ + PAD_CTL_SRE_FAST | PAD_CTL_HYS) + +#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \ + PAD_CTL_HYS) + +#define SPI_PAD_CTRL (PAD_CTL_HYS | OUTPUT_40OHM | \ + PAD_CTL_SRE_FAST) + +#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | OUTPUT_40OHM | \ + PAD_CTL_HYS | PAD_CTL_ODE | PAD_CTL_SRE_FAST) + +int dram_init(void) +{ + gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE); + + return 0; +} + +static iomux_v3_cfg_t const uart1_pads[] = { + MX6_PAD_CSI0_DAT10__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), + MX6_PAD_CSI0_DAT11__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), +}; + +static void setup_iomux_uart(void) +{ + imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); +} + +static iomux_v3_cfg_t const enet_pads[] = { + MX6_PAD_KEY_ROW1__ENET_COL | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL3__ENET_CRS | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_GPIO_18__ENET_RX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD0__ENET_RX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_RXD1__ENET_RX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL2__ENET_RX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_COL0__ENET_RX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_CRS_DV__ENET_RX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD0__ENET_TX_DATA0 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TXD1__ENET_TX_DATA1 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_ROW2__ENET_TX_DATA2 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_KEY_ROW0__ENET_TX_DATA3 | MUX_PAD_CTRL(ENET_PAD_CTRL), + MX6_PAD_ENET_TX_EN__ENET_TX_EN | MUX_PAD_CTRL(ENET_PAD_CTRL), +}; + +static void setup_iomux_enet(void) +{ + imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads)); +} + +static iomux_v3_cfg_t const ecspi1_pads[] = { + MX6_PAD_DISP0_DAT3__ECSPI3_SS0 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT4__ECSPI3_SS1 | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT2__ECSPI3_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT1__ECSPI3_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL), + MX6_PAD_DISP0_DAT0__ECSPI3_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), +}; + +static void setup_iomux_spi(void) +{ + imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); +} + +int board_early_init_f(void) +{ + setup_iomux_uart(); + setup_iomux_spi(); + + return 0; +} + +static iomux_v3_cfg_t const usdhc3_pads[] = { + MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_DAT7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD3_RST__SD3_RESET | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + +int board_mmc_getcd(struct mmc *mmc) +{ + return 1; +} + +struct fsl_esdhc_cfg usdhc_cfg[] = { + {USDHC3_BASE_ADDR}, +}; + +int board_mmc_init(bd_t *bis) +{ + usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); + usdhc_cfg[0].max_bus_width = 8; + + imx_iomux_v3_setup_multiple_pads(usdhc3_pads, ARRAY_SIZE(usdhc3_pads)); + + return fsl_esdhc_initialize(bis, &usdhc_cfg[0]); +} + +#define PC MUX_PAD_CTRL(I2C_PAD_CTRL) + +/* I2C3 - IO expander */ +static struct i2c_pads_info i2c_pad_info2 = { + .scl = { + .i2c_mode = MX6_PAD_EIM_D17__I2C3_SCL | PC, + .gpio_mode = MX6_PAD_EIM_D17__GPIO3_IO17 | PC, + .gp = IMX_GPIO_NR(3, 17) + }, + .sda = { + .i2c_mode = MX6_PAD_EIM_D18__I2C3_SDA | PC, + .gpio_mode = MX6_PAD_EIM_D18__GPIO3_IO18 | PC, + .gp = IMX_GPIO_NR(3, 18) + } +}; + +static iomux_v3_cfg_t const pwm_pad[] = { + MX6_PAD_SD1_CMD__PWM4_OUT | MUX_PAD_CTRL(OUTPUT_40OHM), +}; + +static void leds_on(void) +{ + /* turn on all possible leds connected via GPIO expander */ + i2c_set_bus_num(2); + pca953x_set_dir(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, PCA953X_DIR_OUT); + pca953x_set_val(CONFIG_SYS_I2C_PCA953X_ADDR, 0xffff, 0x0); +} + +static void backlight_lcd_off(void) +{ + unsigned gpio = IMX_GPIO_NR(2, 0); + gpio_direction_output(gpio, 0); + + gpio = IMX_GPIO_NR(2, 3); + gpio_direction_output(gpio, 0); +} + +int board_eth_init(bd_t *bis) +{ + uint32_t base = IMX_FEC_BASE; + struct mii_dev *bus = NULL; + struct phy_device *phydev = NULL; + int ret; + + setup_iomux_enet(); + + bus = fec_get_miibus(base, -1); + if (!bus) + return 0; + + /* scan phy 0 and 5 */ + phydev = phy_find_by_mask(bus, 0x21, PHY_INTERFACE_MODE_RGMII); + if (!phydev) { + free(bus); + return 0; + } + + /* depending on the phy address we can detect our board version */ + if (phydev->addr == 0) + setenv("boardver", ""); + else + setenv("boardver", "mr"); + + printf("using phy at %d\n", phydev->addr); + ret = fec_probe(bis, -1, base, bus, phydev); + if (ret) { + printf("FEC MXC: %s:failed\n", __func__); + free(phydev); + free(bus); + } + return 0; +} + +int board_init(void) +{ + gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; + + backlight_lcd_off(); + + setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); + + leds_on(); + + /* enable ecspi3 clocks */ + enable_cspi_clock(1, 2); + + return 0; +} + +int checkboard(void) +{ + puts("Board: "CONFIG_SYS_BOARD"\n"); + return 0; +} + +#ifdef CONFIG_CMD_BMODE +static const struct boot_mode board_boot_modes[] = { + /* 4 bit bus width */ + {"mmc0", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)}, + {NULL, 0}, +}; +#endif + +int misc_init_r(void) +{ +#ifdef CONFIG_CMD_BMODE + add_board_boot_modes(board_boot_modes); +#endif + return 0; +} -- cgit v1.1 From c9c86bde3d8d24a9eee06f64eaa2e14206c76d77 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:22 -0700 Subject: nitrogen6x: implement board_cfb_skip() to disable text output Several customers have asked to leave the display quiet during boot, so allow the user to express this request by the presence of environment variable "novideo". Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 60a09f4..1a6edac 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -558,6 +558,11 @@ struct display_info_t const displays[] = {{ } } }; size_t display_count = ARRAY_SIZE(displays); +int board_cfb_skip(void) +{ + return NULL != getenv("novideo"); +} + static void setup_display(void) { struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; -- cgit v1.1 From 213e9e334822ba6a08d8d222d392dc30db8aa381 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:23 -0700 Subject: nitrogen6x: simplify board_mmc_getcd The same logic applies to both SD card slots, only with different GPIOs and the code should make that easier to see. Signed-off-by: Troy Kisky --- board/boundary/nitrogen6x/nitrogen6x.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 1a6edac..e8cc243 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -279,17 +279,11 @@ struct fsl_esdhc_cfg usdhc_cfg[2] = { int board_mmc_getcd(struct mmc *mmc) { struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; - int ret; - - if (cfg->esdhc_base == USDHC3_BASE_ADDR) { - gpio_direction_input(IMX_GPIO_NR(7, 0)); - ret = !gpio_get_value(IMX_GPIO_NR(7, 0)); - } else { - gpio_direction_input(IMX_GPIO_NR(2, 6)); - ret = !gpio_get_value(IMX_GPIO_NR(2, 6)); - } + int gp_cd = (cfg->esdhc_base == USDHC3_BASE_ADDR) ? IMX_GPIO_NR(7, 0) : + IMX_GPIO_NR(2, 6); - return ret; + gpio_direction_input(gp_cd); + return !gpio_get_value(gp_cd); } int board_mmc_init(bd_t *bis) -- cgit v1.1 From 41612472b6de135598d0dcf24da783a9802badc8 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:24 -0700 Subject: nitrogen6x: configure SD2 pads for SDIO on USDHC2 Pads SD2_CLK/CMD/DAT0-3 are connected to an SDIO WiFi device on Nitrogen and unconnected on BD-SL-i.MX6 (sabre lite). Configure them as SDIO pins to prevent them from being in a state that confuses the WiFi part. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index e8cc243..bde299f 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -124,6 +124,15 @@ struct i2c_pads_info i2c_pad_info2 = { } }; +static iomux_v3_cfg_t const usdhc2_pads[] = { + MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), + MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), +}; + iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -657,6 +666,8 @@ int board_init(void) #ifdef CONFIG_MXC_SPI setup_spi(); #endif + imx_iomux_v3_setup_multiple_pads( + usdhc2_pads, ARRAY_SIZE(usdhc2_pads)); setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info0); setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2); -- cgit v1.1 From a3b527a947f6f71b2673bb7943854b4459f4142e Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:25 -0700 Subject: nitrogen6x: power-down miscellanous peripherals Ensure that cameras and USB OTG power are in a stable (reset) state at reset by configuring their pads and toggling GPIOs. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 47 +++++++++++++++++++++++++++++++--- 1 file changed, 43 insertions(+), 4 deletions(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index bde299f..38f0df8 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,17 +622,56 @@ static void setup_display(void) } #endif +/* wl1271 pads on nitrogen6x */ +static iomux_v3_cfg_t const init_pads[] = { + /* WL12XX_WL_IRQ_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN), + /* WL12XX_WL_ENABLE_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS2__GPIO6_IO15, OUTPUT_40OHM), + /* WL12XX_BT_ENABLE_GP */ + NEW_PAD_CTRL(MX6_PAD_NANDF_CS3__GPIO6_IO16, OUTPUT_40OHM), + /* USB otg power */ + NEW_PAD_CTRL(MX6_PAD_EIM_D22__GPIO3_IO22, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_NANDF_D5__GPIO2_IO05, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_NANDF_WP_B__GPIO6_IO09, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_GPIO_8__GPIO1_IO08, OUTPUT_40OHM), + NEW_PAD_CTRL(MX6_PAD_GPIO_6__GPIO1_IO06, OUTPUT_40OHM), +}; + +#define WL12XX_WL_IRQ_GP IMX_GPIO_NR(6, 14) + +static unsigned gpios_out_low[] = { + /* Disable wl1271 */ + IMX_GPIO_NR(6, 15), /* disable wireless */ + IMX_GPIO_NR(6, 16), /* disable bluetooth */ + IMX_GPIO_NR(3, 22), /* disable USB otg power */ + IMX_GPIO_NR(2, 5), /* ov5640 mipi camera reset */ + IMX_GPIO_NR(1, 8), /* ov5642 reset */ +}; + +static unsigned gpios_out_high[] = { + IMX_GPIO_NR(1, 6), /* ov5642 powerdown */ + IMX_GPIO_NR(6, 9), /* ov5640 mipi camera power down */ +}; + +static void set_gpios(unsigned *p, int cnt, int val) +{ + int i; + + for (i = 0; i < cnt; i++) + gpio_direction_output(*p++, val); +} + int board_early_init_f(void) { setup_iomux_uart(); - /* Disable wl1271 For Nitrogen6w */ + set_gpios(gpios_out_high, ARRAY_SIZE(gpios_out_high), 1); + set_gpios(gpios_out_low, ARRAY_SIZE(gpios_out_low), 0); gpio_direction_input(WL12XX_WL_IRQ_GP); - gpio_direction_output(WL12XX_WL_ENABLE_GP, 0); - gpio_direction_output(WL12XX_BT_ENABLE_GP, 0); - gpio_direction_output(GP_USB_OTG_PWR, 0); /* OTG power off */ imx_iomux_v3_setup_multiple_pads(wl12xx_pads, ARRAY_SIZE(wl12xx_pads)); + imx_iomux_v3_setup_multiple_pads(init_pads, ARRAY_SIZE(init_pads)); setup_buttons(); #if defined(CONFIG_VIDEO_IPUV3) -- cgit v1.1 From 693cccf412b14b69cd6c81e10f150302ebfdd696 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:26 -0700 Subject: nitrogen6x: configure SGTL5000, CSI camera clock outputs Configure CLKO outputs for SGTL5000, CSI camera. The sys_mclk output for the SGTL500 in particular prevents Windows CE from properly driving audio. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 38f0df8..96e2b74 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -622,8 +622,14 @@ static void setup_display(void) } #endif -/* wl1271 pads on nitrogen6x */ static iomux_v3_cfg_t const init_pads[] = { + /* SGTL5000 sys_mclk */ + NEW_PAD_CTRL(MX6_PAD_GPIO_0__CCM_CLKO1, OUTPUT_40OHM), + + /* J5 - Camera MCLK */ + NEW_PAD_CTRL(MX6_PAD_GPIO_3__CCM_CLKO2, OUTPUT_40OHM), + + /* wl1271 pads on nitrogen6x */ /* WL12XX_WL_IRQ_GP */ NEW_PAD_CTRL(MX6_PAD_NANDF_CS1__GPIO6_IO14, WEAK_PULLDOWN), /* WL12XX_WL_ENABLE_GP */ -- cgit v1.1 From 9fc425278b333f481d1bbf1efd98813dcd4d57d4 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:27 -0700 Subject: nitrogen6x: staticize board file Declare locally-used data structures and functions as static and pull in header files to prevent compiler warnings of "Should it be static?" when building with "make C=1". Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 30 ++++++++++++++++-------------- 1 file changed, 16 insertions(+), 14 deletions(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 96e2b74..e795492 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -28,6 +28,8 @@ #include #include #include +#include +#include DECLARE_GLOBAL_DATA_PTR; #define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22) @@ -70,12 +72,12 @@ int dram_init(void) return 0; } -iomux_v3_cfg_t const uart1_pads[] = { +static iomux_v3_cfg_t const uart1_pads[] = { MX6_PAD_SD3_DAT6__UART1_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_SD3_DAT7__UART1_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; -iomux_v3_cfg_t const uart2_pads[] = { +static iomux_v3_cfg_t const uart2_pads[] = { MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL), }; @@ -83,7 +85,7 @@ iomux_v3_cfg_t const uart2_pads[] = { #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) /* I2C1, SGTL5000 */ -struct i2c_pads_info i2c_pad_info0 = { +static struct i2c_pads_info i2c_pad_info0 = { .scl = { .i2c_mode = MX6_PAD_EIM_D21__I2C1_SCL | PC, .gpio_mode = MX6_PAD_EIM_D21__GPIO3_IO21 | PC, @@ -97,7 +99,7 @@ struct i2c_pads_info i2c_pad_info0 = { }; /* I2C2 Camera, MIPI */ -struct i2c_pads_info i2c_pad_info1 = { +static struct i2c_pads_info i2c_pad_info1 = { .scl = { .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL | PC, .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12 | PC, @@ -111,7 +113,7 @@ struct i2c_pads_info i2c_pad_info1 = { }; /* I2C3, J15 - RGB connector */ -struct i2c_pads_info i2c_pad_info2 = { +static struct i2c_pads_info i2c_pad_info2 = { .scl = { .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL | PC, .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05 | PC, @@ -133,7 +135,7 @@ static iomux_v3_cfg_t const usdhc2_pads[] = { MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), }; -iomux_v3_cfg_t const usdhc3_pads[] = { +static iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -143,7 +145,7 @@ iomux_v3_cfg_t const usdhc3_pads[] = { MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t const usdhc4_pads[] = { +static iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), @@ -153,7 +155,7 @@ iomux_v3_cfg_t const usdhc4_pads[] = { MX6_PAD_NANDF_D6__GPIO2_IO06 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */ }; -iomux_v3_cfg_t const enet_pads1[] = { +static iomux_v3_cfg_t const enet_pads1[] = { MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -180,7 +182,7 @@ iomux_v3_cfg_t const enet_pads1[] = { MX6_PAD_ENET_RXD0__GPIO1_IO27 | MUX_PAD_CTRL(NO_PAD_CTRL), }; -iomux_v3_cfg_t const enet_pads2[] = { +static iomux_v3_cfg_t const enet_pads2[] = { MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), @@ -198,7 +200,7 @@ static iomux_v3_cfg_t const misc_pads[] = { }; /* wl1271 pads on nitrogen6x */ -iomux_v3_cfg_t const wl12xx_pads[] = { +static iomux_v3_cfg_t const wl12xx_pads[] = { (MX6_PAD_NANDF_CS1__GPIO6_IO14 & ~MUX_PAD_CTRL_MASK) | MUX_PAD_CTRL(WEAK_PULLDOWN), (MX6_PAD_NANDF_CS2__GPIO6_IO15 & ~MUX_PAD_CTRL_MASK) @@ -246,7 +248,7 @@ static void setup_iomux_enet(void) imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); } -iomux_v3_cfg_t const usb_pads[] = { +static iomux_v3_cfg_t const usb_pads[] = { MX6_PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), }; @@ -280,7 +282,7 @@ int board_ehci_power(int port, int on) #endif #ifdef CONFIG_FSL_ESDHC -struct fsl_esdhc_cfg usdhc_cfg[2] = { +static struct fsl_esdhc_cfg usdhc_cfg[2] = { {USDHC3_BASE_ADDR}, {USDHC4_BASE_ADDR}, }; @@ -331,7 +333,7 @@ int board_mmc_init(bd_t *bis) #endif #ifdef CONFIG_MXC_SPI -iomux_v3_cfg_t const ecspi1_pads[] = { +static iomux_v3_cfg_t const ecspi1_pads[] = { /* SS1 */ MX6_PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL), MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL), @@ -339,7 +341,7 @@ iomux_v3_cfg_t const ecspi1_pads[] = { MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL), }; -void setup_spi(void) +static void setup_spi(void) { imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads)); -- cgit v1.1 From adc4a2bd03ad6ab4cc7f73609d60ab740c8126e6 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Thu, 2 Oct 2014 12:16:29 -0700 Subject: nitrogen6x: phy: add 100 us delay after phy reset Testing shows that the Micrel PHY may not be completely out of reset if accessed immediately. Signed-off-by: Troy Kisky Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index e795492..a89a15c 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -246,6 +246,7 @@ static void setup_iomux_enet(void) gpio_set_value(IMX_GPIO_NR(1, 27), 1); /* Nitrogen6X PHY reset */ imx_iomux_v3_setup_multiple_pads(enet_pads2, ARRAY_SIZE(enet_pads2)); + udelay(100); /* Wait 100 us before using mii interface */ } static iomux_v3_cfg_t const usb_pads[] = { -- cgit v1.1 From 84caf0b26b513df0a0f45832d053a623963e5c6f Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:30 -0700 Subject: nitrogen6x: prevent warnings about board_ehci* callbacks Include declarations of board_ehci callbacks to prevent compiler warnings and enforce function prototypes. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index a89a15c..67d4154 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -30,6 +30,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; #define GP_USB_OTG_PWR IMX_GPIO_NR(3, 22) -- cgit v1.1 From 4328fb05bf8c90e96afa023d39395efa5fb2fda5 Mon Sep 17 00:00:00 2001 From: Robert Winkler Date: Thu, 2 Oct 2014 12:16:31 -0700 Subject: nitrogen6x: display: add support lvds jeida screen Add support for Boundary Devices 7" and 10.1" 1280x800 displays with integrated FocalTech ft5x06 10-point touch controller. Because they share the touch controller with the 1024x600 displays, auto-detection is disabled and you must explicitly set the 'panel' environment variable: U-Boot > setenv panel LDB-WXGA U-Boot > saveenv && reset Signed-off-by: Robert Winkler Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 67d4154..39e8013 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -474,6 +474,17 @@ static void enable_lvds(struct display_info_t const *dev) gpio_direction_output(LVDS_BACKLIGHT_GP, 1); } +static void enable_lvds_jeida(struct display_info_t const *dev) +{ + struct iomuxc *iomux = (struct iomuxc *) + IOMUXC_BASE_ADDR; + u32 reg = readl(&iomux->gpr[2]); + reg |= IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT + |IOMUXC_GPR2_BIT_MAPPING_CH0_JEIDA; + writel(reg, &iomux->gpr[2]); + gpio_direction_output(LVDS_BACKLIGHT_GP, 1); +} + static void enable_rgb(struct display_info_t const *dev) { imx_iomux_v3_setup_multiple_pads( @@ -503,6 +514,26 @@ struct display_info_t const displays[] = {{ .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds_jeida, + .mode = { + .name = "LDB-WXGA", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14065, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 3, + .lower_margin = 80, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x4, .pixfmt = IPU_PIX_FMT_LVDS666, -- cgit v1.1 From 443d4d15d7bd2f2bd5a58a6a6dd8da2a8dd23de4 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:32 -0700 Subject: nitrogen6x: display: add qvga panel Add support for a 1/4 VGA panel with a 24-bit RGB interface. No auto-detection is enabled, so you must configure the 'panel' environment variable to use this display: U-Boot > setenv panel qvga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 39e8013..5e0461c 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -593,6 +593,26 @@ struct display_info_t const displays[] = {{ .vsync_len = 10, .sync = 0, .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "qvga", + .refresh = 60, + .xres = 320, + .yres = 240, + .pixclock = 37037, + .left_margin = 38, + .right_margin = 37, + .upper_margin = 16, + .lower_margin = 15, + .hsync_len = 30, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED } } }; size_t display_count = ARRAY_SIZE(displays); -- cgit v1.1 From 4adc1127f8c50c4361d0024e098a91e7050e7400 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:33 -0700 Subject: nitrogen6x: display: add support for LG-9.7 LVDS display Add support for LG 9.7" LVDS panel (1024x768) with integrated eGalax touch screen. Note that this panel differs only slightly from the Hannstar XGA panel (margins). No auto-detection is available because it shares the same touch controller as the Hannstar-XGA display, so you'll need to configure it through the 'panel' environment variable: U-Boot > setenv panel LG-9.7 U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 5e0461c..2200bc7 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -554,6 +554,26 @@ struct display_info_t const displays[] = {{ .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "LG-9.7", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, /* ~65MHz */ + .left_margin = 480, + .right_margin = 260, + .upper_margin = 16, + .lower_margin = 6, + .hsync_len = 250, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x38, .pixfmt = IPU_PIX_FMT_LVDS666, -- cgit v1.1 From d6949e3f9dc6f2bbc63b1614601291091d1f0347 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:34 -0700 Subject: nitrogen6x: display: add LDB-WXGA-S for SPWG 1280x800 displays This patch adds support for LVDS WXGA displays that use the SPWG encoding standard instead of JEIDA. No auto-detection is enabled and you must explicitly set the 'panel' environment variable: U-Boot > setenv panel LDB-WXGA-S U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 2200bc7..045f81e 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -534,6 +534,26 @@ struct display_info_t const displays[] = {{ .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB24, + .detect = NULL, + .enable = enable_lvds, + .mode = { + .name = "LDB-WXGA-S", + .refresh = 60, + .xres = 1280, + .yres = 800, + .pixclock = 14065, + .left_margin = 40, + .right_margin = 40, + .upper_margin = 3, + .lower_margin = 80, + .hsync_len = 10, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x4, .pixfmt = IPU_PIX_FMT_LVDS666, -- cgit v1.1 From 04edda266d333af5fe8cd5775f49071e8098082a Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:35 -0700 Subject: nitrogen6x: display: add support for fusion 7 display Add support for the Touch Revolution Fusion7 display: 800x480 RGB with a custom F0710A resistive touch controller. Auto-detection of this panel is supported so no configuration is required. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 045f81e..be2a41f 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -615,6 +615,26 @@ struct display_info_t const displays[] = {{ .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, + .addr = 0x10, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = detect_i2c, + .enable = enable_rgb, + .mode = { + .name = "fusion7", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 33898, + .left_margin = 96, + .right_margin = 24, + .upper_margin = 3, + .lower_margin = 10, + .hsync_len = 72, + .vsync_len = 7, + .sync = 0x40000002, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, .addr = 0x48, .pixfmt = IPU_PIX_FMT_RGB666, .detect = detect_i2c, -- cgit v1.1 From 135663061ffa78c391dd502674bb50823555b675 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:36 -0700 Subject: nitrogen6x: display: add svga display (800x600) Add support for 800x600 18-bit RGB displays using VESA GTF timings. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index be2a41f..ccbb9b7 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -634,6 +634,26 @@ struct display_info_t const displays[] = {{ .sync = 0x40000002, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_RGB666, + .detect = NULL, + .enable = enable_rgb, + .mode = { + .name = "svga", + .refresh = 60, + .xres = 800, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x48, .pixfmt = IPU_PIX_FMT_RGB666, -- cgit v1.1 From 865aa30bb30fb1675ea516bfab8850f91da69a29 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:37 -0700 Subject: nitrogen6x: display: add Ampire 1024x600 panel Add support for an Ampire 1024x600 LVDS panel with integrated Ilitek capacitive touch screen. Auto-detection is enabled, so no explicit configuration is needed. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index ccbb9b7..38d0b52 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -655,6 +655,26 @@ struct display_info_t const displays[] = {{ .vmode = FB_VMODE_NONINTERLACED } }, { .bus = 2, + .addr = 0x41, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = detect_i2c, + .enable = enable_lvds, + .mode = { + .name = "amp1024x600", + .refresh = 60, + .xres = 1024, + .yres = 600, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { + .bus = 2, .addr = 0x48, .pixfmt = IPU_PIX_FMT_RGB666, .detect = detect_i2c, -- cgit v1.1 From c745de7174e9f59f68ec281bf094259ada46d2a8 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:38 -0700 Subject: nitrogen6x: display: add wvga-lvds panel Add support for WVGA (800x480) panels using VESA GTF timings over LVDS. No auto-detection is supported, so you must configure this panel manually through the 'panel' environment variable: U-Boot > setenv panel svga U-Boot > saveenv && reset Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index 38d0b52..a82ec45 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -674,6 +674,26 @@ struct display_info_t const displays[] = {{ .sync = FB_SYNC_EXT, .vmode = FB_VMODE_NONINTERLACED } }, { + .bus = 0, + .addr = 0, + .pixfmt = IPU_PIX_FMT_LVDS666, + .detect = 0, + .enable = enable_lvds, + .mode = { + .name = "wvga-lvds", + .refresh = 57, + .xres = 800, + .yres = 480, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = FB_SYNC_EXT, + .vmode = FB_VMODE_NONINTERLACED +} }, { .bus = 2, .addr = 0x48, .pixfmt = IPU_PIX_FMT_RGB666, -- cgit v1.1 From ce9507b793a0755b37b3612657a12f4d19ee0b61 Mon Sep 17 00:00:00 2001 From: Eric Nelson Date: Thu, 2 Oct 2014 12:16:39 -0700 Subject: nitrogen6x: display use I2C detect for HDMI The HPD pin and RX_SENSE registers have proven to be less reliable than using I2C on the EDID pins for detection of an HDMI monitor. In particular, when the HDMI output is reset through a "reboot" cycle, the detect_hdmi() routine often bounces, resulting in a failure to detect a connected monitor. Signed-off-by: Eric Nelson --- board/boundary/nitrogen6x/nitrogen6x.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/boundary/nitrogen6x/nitrogen6x.c b/board/boundary/nitrogen6x/nitrogen6x.c index a82ec45..2762fcf 100644 --- a/board/boundary/nitrogen6x/nitrogen6x.c +++ b/board/boundary/nitrogen6x/nitrogen6x.c @@ -494,10 +494,10 @@ static void enable_rgb(struct display_info_t const *dev) } struct display_info_t const displays[] = {{ - .bus = -1, - .addr = 0, + .bus = 1, + .addr = 0x50, .pixfmt = IPU_PIX_FMT_RGB24, - .detect = detect_hdmi, + .detect = detect_i2c, .enable = do_enable_hdmi, .mode = { .name = "HDMI", -- cgit v1.1 From de8f7705aa8f39f2f959299d8d6b290674ab27b3 Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Fri, 26 Sep 2014 18:54:43 +0900 Subject: exynos: update maintainer of Snow and SMDK5420 board The email address of Rajeshwari Shinde is not working. This commit gives Akshay the maintainership of Snow and SMDK5420 boards. Signed-off-by: Masahiro Yamada Cc: Akshay Saraswat Cc: Minkyu Kang Signed-off-by: Minkyu Kang --- board/samsung/smdk5250/MAINTAINERS | 2 +- board/samsung/smdk5420/MAINTAINERS | 4 ---- 2 files changed, 1 insertion(+), 5 deletions(-) (limited to 'board') diff --git a/board/samsung/smdk5250/MAINTAINERS b/board/samsung/smdk5250/MAINTAINERS index 8a2a4aa..070593e 100644 --- a/board/samsung/smdk5250/MAINTAINERS +++ b/board/samsung/smdk5250/MAINTAINERS @@ -6,7 +6,7 @@ F: include/configs/smdk5250.h F: configs/smdk5250_defconfig SNOW BOARD -M: Rajeshwari Shinde +M: Akshay Saraswat S: Maintained F: include/configs/snow.h F: configs/snow_defconfig diff --git a/board/samsung/smdk5420/MAINTAINERS b/board/samsung/smdk5420/MAINTAINERS index c8241a8..e0f5c7a 100644 --- a/board/samsung/smdk5420/MAINTAINERS +++ b/board/samsung/smdk5420/MAINTAINERS @@ -4,9 +4,5 @@ S: Maintained F: board/samsung/smdk5420/ F: include/configs/peach-pit.h F: configs/peach-pit_defconfig - -SMDK5420 BOARD -M: Rajeshwari Shinde -S: Maintained F: include/configs/smdk5420.h F: configs/smdk5420_defconfig -- cgit v1.1 From b219773957d2ee8fedb56f0fcb19288eb72d4867 Mon Sep 17 00:00:00 2001 From: Przemyslaw Marczak Date: Tue, 23 Sep 2014 12:46:43 +0200 Subject: odroid: clock: set aclk_cores to 200MHz This change fixes suspend/resume issue in the kernel caused by the wrong 'aclk_cores' clock value expected by the kernel. Signed-off-by: Przemyslaw Marczak Cc: Minkyu Kang Signed-off-by: Minkyu Kang --- board/samsung/odroid/odroid.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/samsung/odroid/odroid.c b/board/samsung/odroid/odroid.c index ac19527..5edb250 100644 --- a/board/samsung/odroid/odroid.c +++ b/board/samsung/odroid/odroid.c @@ -158,10 +158,10 @@ static void board_clock_init(void) * For MOUThpm = 1000 MHz (MOUTapll) * doutcopy = MOUThpm / (ratio + 1) = 200 (4) * sclkhpm = doutcopy / (ratio + 1) = 200 (4) - * cores_out = armclk / (ratio + 1) = 1000 (0) + * cores_out = armclk / (ratio + 1) = 200 (4) */ clr = COPY_RATIO(7) | HPM_RATIO(7) | CORES_RATIO(7); - set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(0); + set = COPY_RATIO(4) | HPM_RATIO(4) | CORES_RATIO(4); clrsetbits_le32(&clk->div_cpu1, clr, set); -- cgit v1.1 From 83335bdc0c3249cfe66df36b6826e29ffab6aa7f Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 24 Jul 2014 15:28:04 +0900 Subject: arm: rmobile: koelsch: Update QoS initialization to version 0.334 This update QoS version 0.334 for ES2 of R8A7791. Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/koelsch/qos.c | 41 +++++++++++++++++++++-------------------- 1 file changed, 21 insertions(+), 20 deletions(-) (limited to 'board') diff --git a/board/renesas/koelsch/qos.c b/board/renesas/koelsch/qos.c index 55a0420..ecf3eed 100644 --- a/board/renesas/koelsch/qos.c +++ b/board/renesas/koelsch/qos.c @@ -13,7 +13,7 @@ #include #include -/* QoS version 0.240 for ES1 and version 0.310 for ES2 */ +/* QoS version 0.240 for ES1 and version 0.334 for ES2 */ enum { DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, @@ -116,10 +116,16 @@ void qos_init(void) /* S3C -QoS */ s3c = (struct rcar_s3c *)S3C_BASE; if (IS_R8A7791_ES2()) { - writel(0x00FF1B0D, &s3c->s3cadsplcr); - writel(0x1F0D0B0A, &s3c->s3crorr); - writel(0x1F0D0B09, &s3c->s3cworr); - writel(0x00200808, &s3c->s3carcr11); + /* Linear All mode */ + /* writel(0x00000000, &s3c->s3cadsplcr); */ + /* Linear Linear 0x7000 to 0x7800 mode */ + writel(0x00BF1B0C, &s3c->s3cadsplcr); + /* Split Linear 0x6800 t 0x7000 mode */ + /* writel(0x00DF1B0C, &s3c->s3cadsplcr); */ + /* Ssplit All mode */ + /* writel(0x00FF1B0C, &s3c->s3cadsplcr); */ + writel(0x1F0B0908, &s3c->s3crorr); + writel(0x1F0C0A08, &s3c->s3cworr); } else { writel(0x00FF1B1D, &s3c->s3cadsplcr); writel(0x1F0D0C0C, &s3c->s3crorr); @@ -149,10 +155,7 @@ void qos_init(void) writel(0x00002032, &s3c_qos->s3cqos8); s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE; - if (IS_R8A7791_ES2()) - writel(0x80928092, &s3c_qos->s3cqos0); - else - writel(0x00820082, &s3c_qos->s3cqos0); + writel(0x00820082, &s3c_qos->s3cqos0); writel(0x20960020, &s3c_qos->s3cqos1); writel(0x20302030, &s3c_qos->s3cqos2); writel(0x20AA20DC, &s3c_qos->s3cqos3); @@ -185,7 +188,7 @@ void qos_init(void) writel(0x00000001, &qos_addr->dbrqctr); writel(0x00002078, &qos_addr->dbthres0); writel(0x0000204B, &qos_addr->dbthres1); - writel(0x00001FE7, &qos_addr->dbthres2); + writel(0x0000201E, &qos_addr->dbthres2); writel(0x00000001, &qos_addr->dblgqon); } @@ -193,13 +196,13 @@ void qos_init(void) for (i = DBSC3_00; i < DBSC3_NR; i++) { qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; writel(0x00000002, &qos_addr->dblgcnt); - writel(0x000020EB, &qos_addr->dbtmval0); - writel(0x0000206E, &qos_addr->dbtmval1); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); writel(0x00002050, &qos_addr->dbtmval2); writel(0x0000203A, &qos_addr->dbtmval3); writel(0x00000001, &qos_addr->dbrqctr); writel(0x00002078, &qos_addr->dbthres0); - writel(0x0000205A, &qos_addr->dbthres1); + writel(0x0000204B, &qos_addr->dbthres1); writel(0x0000203C, &qos_addr->dbthres2); writel(0x00000001, &qos_addr->dblgqon); } @@ -215,7 +218,7 @@ void qos_init(void) writel(0x00000001, &qos_addr->dbrqctr); writel(0x00002078, &qos_addr->dbthres0); writel(0x0000204B, &qos_addr->dbthres1); - writel(0x00001FE7, &qos_addr->dbthres2); + writel(0x0000201E, &qos_addr->dbthres2); writel(0x00000001, &qos_addr->dblgqon); } @@ -223,13 +226,13 @@ void qos_init(void) for (i = DBSC3_00; i < DBSC3_NR; i++) { qos_addr = (struct rcar_dbsc3_qos *)dbsc3_1_w_qos_addr[i]; writel(0x00000002, &qos_addr->dblgcnt); - writel(0x000020EB, &qos_addr->dbtmval0); - writel(0x0000206E, &qos_addr->dbtmval1); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); writel(0x00002050, &qos_addr->dbtmval2); writel(0x0000203A, &qos_addr->dbtmval3); writel(0x00000001, &qos_addr->dbrqctr); writel(0x00002078, &qos_addr->dbthres0); - writel(0x0000205A, &qos_addr->dbthres1); + writel(0x0000204B, &qos_addr->dbthres1); writel(0x0000203C, &qos_addr->dbthres2); writel(0x00000001, &qos_addr->dblgqon); } @@ -245,14 +248,12 @@ void qos_init(void) mxi = (struct rcar_mxi *)MXI_BASE; writel(0x00000013, &mxi->mxrtcr); writel(0x00000013, &mxi->mxwtcr); - writel(0x00780080, &mxi->mxsaar0); - writel(0x02000800, &mxi->mxsaar1); /* QoS Control (MXI) */ mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE; writel(0x0000000C, &mxi_qos->vspdu0); writel(0x0000000C, &mxi_qos->vspdu1); - writel(0x0000000D, &mxi_qos->du0); + writel(0x0000000E, &mxi_qos->du0); writel(0x0000000D, &mxi_qos->du1); /* AXI -QoS */ -- cgit v1.1 From 4c216f556c4f909799e5608d937ed1c0f93c2bd9 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Thu, 24 Jul 2014 15:30:32 +0900 Subject: arm: rmobile: alt: Update QoS initialization to version 0.11 Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/alt/qos.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/renesas/alt/qos.c b/board/renesas/alt/qos.c index ea51f3f..d788aa0 100644 --- a/board/renesas/alt/qos.c +++ b/board/renesas/alt/qos.c @@ -13,7 +13,7 @@ #include #include -/* QoS version 0.10 */ +/* QoS version 0.11 */ enum { DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, @@ -156,8 +156,8 @@ void qos_init(void) } /* CCI-400 -QoS */ - writel(0x20001000, CCI_400_MAXOT_1); - writel(0x20001000, CCI_400_MAXOT_2); + writel(0x20000800, CCI_400_MAXOT_1); + writel(0x20000800, CCI_400_MAXOT_2); writel(0x0000000C, CCI_400_QOSCNTL_1); writel(0x0000000C, CCI_400_QOSCNTL_2); -- cgit v1.1 From 96c434b17d292d44a7163afdcdac0b0e7b446c3a Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 29 Jul 2014 12:13:16 +0900 Subject: arm: rmobile: lager: Update Qos setting to version 0.955 This updates QoS version 0.955 for ES1 of lager board. Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/lager/qos.c | 107 ++++++++++++++++++++++++++-------------------- 1 file changed, 61 insertions(+), 46 deletions(-) (limited to 'board') diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c index 3742757..930fe8d 100644 --- a/board/renesas/lager/qos.c +++ b/board/renesas/lager/qos.c @@ -12,55 +12,55 @@ #include #include -/* QoS version 0.955 */ +/* QoS version 0.955 for ES1 enum { - DBSC3_R00, DBSC3_R01, DBSC3_R02, DBSC3_R03, DBSC3_R04, - DBSC3_R05, DBSC3_R06, DBSC3_R07, DBSC3_R08, DBSC3_R09, - DBSC3_R10, DBSC3_R11, DBSC3_R12, DBSC3_R13, DBSC3_R14, - DBSC3_R15, - DBSC3_W00, DBSC3_W01, DBSC3_W02, DBSC3_W03, DBSC3_W04, - DBSC3_W05, DBSC3_W06, DBSC3_W07, DBSC3_W08, DBSC3_W09, - DBSC3_W10, DBSC3_W11, DBSC3_W12, DBSC3_W13, DBSC3_W14, - DBSC3_W15, + DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, + DBSC3_05, DBSC3_06, DBSC3_07, DBSC3_08, DBSC3_09, + DBSC3_10, DBSC3_11, DBSC3_12, DBSC3_13, DBSC3_14, + DBSC3_15, DBSC3_NR, }; -static const u32 dbsc3_qos_addr[DBSC3_NR] = { - [DBSC3_R00] = DBSC3_0_QOS_R0_BASE, - [DBSC3_R01] = DBSC3_0_QOS_R1_BASE, - [DBSC3_R02] = DBSC3_0_QOS_R2_BASE, - [DBSC3_R03] = DBSC3_0_QOS_R3_BASE, - [DBSC3_R04] = DBSC3_0_QOS_R4_BASE, - [DBSC3_R05] = DBSC3_0_QOS_R5_BASE, - [DBSC3_R06] = DBSC3_0_QOS_R6_BASE, - [DBSC3_R07] = DBSC3_0_QOS_R7_BASE, - [DBSC3_R08] = DBSC3_0_QOS_R8_BASE, - [DBSC3_R09] = DBSC3_0_QOS_R9_BASE, - [DBSC3_R10] = DBSC3_0_QOS_R10_BASE, - [DBSC3_R11] = DBSC3_0_QOS_R11_BASE, - [DBSC3_R12] = DBSC3_0_QOS_R12_BASE, - [DBSC3_R13] = DBSC3_0_QOS_R13_BASE, - [DBSC3_R14] = DBSC3_0_QOS_R14_BASE, - [DBSC3_R15] = DBSC3_0_QOS_R15_BASE, - [DBSC3_W00] = DBSC3_0_QOS_W0_BASE, - [DBSC3_W01] = DBSC3_0_QOS_W1_BASE, - [DBSC3_W02] = DBSC3_0_QOS_W2_BASE, - [DBSC3_W03] = DBSC3_0_QOS_W3_BASE, - [DBSC3_W04] = DBSC3_0_QOS_W4_BASE, - [DBSC3_W05] = DBSC3_0_QOS_W5_BASE, - [DBSC3_W06] = DBSC3_0_QOS_W6_BASE, - [DBSC3_W07] = DBSC3_0_QOS_W7_BASE, - [DBSC3_W08] = DBSC3_0_QOS_W8_BASE, - [DBSC3_W09] = DBSC3_0_QOS_W9_BASE, - [DBSC3_W10] = DBSC3_0_QOS_W10_BASE, - [DBSC3_W11] = DBSC3_0_QOS_W11_BASE, - [DBSC3_W12] = DBSC3_0_QOS_W12_BASE, - [DBSC3_W13] = DBSC3_0_QOS_W13_BASE, - [DBSC3_W14] = DBSC3_0_QOS_W14_BASE, - [DBSC3_W15] = DBSC3_0_QOS_W15_BASE, +static u32 dbsc3_0_r_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_R0_BASE, + [DBSC3_01] = DBSC3_0_QOS_R1_BASE, + [DBSC3_02] = DBSC3_0_QOS_R2_BASE, + [DBSC3_03] = DBSC3_0_QOS_R3_BASE, + [DBSC3_04] = DBSC3_0_QOS_R4_BASE, + [DBSC3_05] = DBSC3_0_QOS_R5_BASE, + [DBSC3_06] = DBSC3_0_QOS_R6_BASE, + [DBSC3_07] = DBSC3_0_QOS_R7_BASE, + [DBSC3_08] = DBSC3_0_QOS_R8_BASE, + [DBSC3_09] = DBSC3_0_QOS_R9_BASE, + [DBSC3_10] = DBSC3_0_QOS_R10_BASE, + [DBSC3_11] = DBSC3_0_QOS_R11_BASE, + [DBSC3_12] = DBSC3_0_QOS_R12_BASE, + [DBSC3_13] = DBSC3_0_QOS_R13_BASE, + [DBSC3_14] = DBSC3_0_QOS_R14_BASE, + [DBSC3_15] = DBSC3_0_QOS_R15_BASE, }; +static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = { + [DBSC3_00] = DBSC3_0_QOS_W0_BASE, + [DBSC3_01] = DBSC3_0_QOS_W1_BASE, + [DBSC3_02] = DBSC3_0_QOS_W2_BASE, + [DBSC3_03] = DBSC3_0_QOS_W3_BASE, + [DBSC3_04] = DBSC3_0_QOS_W4_BASE, + [DBSC3_05] = DBSC3_0_QOS_W5_BASE, + [DBSC3_06] = DBSC3_0_QOS_W6_BASE, + [DBSC3_07] = DBSC3_0_QOS_W7_BASE, + [DBSC3_08] = DBSC3_0_QOS_W8_BASE, + [DBSC3_09] = DBSC3_0_QOS_W9_BASE, + [DBSC3_10] = DBSC3_0_QOS_W10_BASE, + [DBSC3_11] = DBSC3_0_QOS_W11_BASE, + [DBSC3_12] = DBSC3_0_QOS_W12_BASE, + [DBSC3_13] = DBSC3_0_QOS_W13_BASE, + [DBSC3_14] = DBSC3_0_QOS_W14_BASE, + [DBSC3_15] = DBSC3_0_QOS_W15_BASE, +}; + +/* QoS version 0.955 for ES1 */ void qos_init(void) { int i; @@ -115,7 +115,6 @@ void qos_init(void) writel(0x20142032, &s3c_qos->s3cqos8); s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE; - writel(0x00810089, &s3c_qos->s3cqos0); writel(0x20410001, &s3c_qos->s3cqos1); writel(0x200A2023, &s3c_qos->s3cqos2); @@ -129,9 +128,24 @@ void qos_init(void) writel(0x00200808, &s3c->s3carcr11); /* DBSC -QoS */ - /* DBSC0 - Read/Write */ - for (i = DBSC3_R00; i < DBSC3_NR; i++) { - qos_addr = (struct rcar_dbsc3_qos *)dbsc3_qos_addr[i]; + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000203, &qos_addr->dblgcnt); + writel(0x00002064, &qos_addr->dbtmval0); + writel(0x00002048, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00002019, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002019, &qos_addr->dbthres0); + writel(0x00002019, &qos_addr->dbthres1); + writel(0x00002019, &qos_addr->dbthres2); + writel(0x00000000, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; writel(0x00000203, &qos_addr->dblgcnt); writel(0x00002064, &qos_addr->dbtmval0); writel(0x00002048, &qos_addr->dbtmval1); @@ -143,6 +157,7 @@ void qos_init(void) writel(0x00002019, &qos_addr->dbthres2); writel(0x00000000, &qos_addr->dblgqon); } + /* CCI-400 -QoS */ writel(0x20001000, CCI_400_MAXOT_1); writel(0x20001000, CCI_400_MAXOT_2); -- cgit v1.1 From 9f1c3beada5a3b70318def14b6b04355d41baa82 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Tue, 29 Jul 2014 12:14:05 +0900 Subject: arm: rmobile: lager: Add Qos setting for ES2 This adds support version 0.963 for ES2 of lager board. Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/lager/qos.c | 1253 ++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 1251 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/renesas/lager/qos.c b/board/renesas/lager/qos.c index 930fe8d..ce7f8ba 100644 --- a/board/renesas/lager/qos.c +++ b/board/renesas/lager/qos.c @@ -12,7 +12,7 @@ #include #include -/* QoS version 0.955 for ES1 +/* QoS version 0.955 for ES1 and version 0.963 for ES2 */ enum { DBSC3_00, DBSC3_01, DBSC3_02, DBSC3_03, DBSC3_04, @@ -61,7 +61,7 @@ static u32 dbsc3_0_w_qos_addr[DBSC3_NR] = { }; /* QoS version 0.955 for ES1 */ -void qos_init(void) +static void qos_init_es1(void) { int i; struct rcar_s3c *s3c; @@ -1132,3 +1132,1252 @@ void qos_init(void) writel(0x00000001, &axi_qos->qosthres2); writel(0x00000000, &axi_qos->qosqon); } + +/* QoS version 0.963 for ES2 */ +static void qos_init_es2(void) +{ + int i; + struct rcar_s3c *s3c; + struct rcar_s3c_qos *s3c_qos; + struct rcar_dbsc3_qos *qos_addr; + struct rcar_mxi *mxi; + struct rcar_mxi_qos *mxi_qos; + struct rcar_axi_qos *axi_qos; + + /* DBSC DBADJ2 */ + writel(0x20042004, DBSC3_0_DBADJ2); + + /* S3C -QoS */ + s3c = (struct rcar_s3c *)S3C_BASE; + writel(0x80000000, &s3c->s3cadsplcr); + writel(0x1F060504, &s3c->s3crorr); + writel(0x1F060503, &s3c->s3cworr); + + /* QoS Control Registers */ + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI0_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_CCI1_BASE; + writel(0x00890089, &s3c_qos->s3cqos0); + writel(0x20960010, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA2200, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960010, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA2200, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_MXI_BASE; + writel(0x80928092, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20DC, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20DC, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + s3c_qos = (struct rcar_s3c_qos *)S3C_QOS_AXI_BASE; + writel(0x00820082, &s3c_qos->s3cqos0); + writel(0x20960020, &s3c_qos->s3cqos1); + writel(0x20302030, &s3c_qos->s3cqos2); + writel(0x20AA20FA, &s3c_qos->s3cqos3); + writel(0x00002032, &s3c_qos->s3cqos4); + writel(0x20960020, &s3c_qos->s3cqos5); + writel(0x20302030, &s3c_qos->s3cqos6); + writel(0x20AA20FA, &s3c_qos->s3cqos7); + writel(0x00002032, &s3c_qos->s3cqos8); + + writel(0x00200808, &s3c->s3carcr11); + + /* DBSC -QoS */ + /* DBSC0 - Read */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_r_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002032, &qos_addr->dbtmval2); + writel(0x00001FB0, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x0000201E, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* DBSC0 - Write */ + for (i = DBSC3_00; i < DBSC3_NR; i++) { + qos_addr = (struct rcar_dbsc3_qos *)dbsc3_0_w_qos_addr[i]; + writel(0x00000002, &qos_addr->dblgcnt); + writel(0x00002096, &qos_addr->dbtmval0); + writel(0x00002064, &qos_addr->dbtmval1); + writel(0x00002050, &qos_addr->dbtmval2); + writel(0x0000203A, &qos_addr->dbtmval3); + writel(0x00000001, &qos_addr->dbrqctr); + writel(0x00002078, &qos_addr->dbthres0); + writel(0x0000204B, &qos_addr->dbthres1); + writel(0x0000203C, &qos_addr->dbthres2); + writel(0x00000001, &qos_addr->dblgqon); + } + + /* MXI -QoS */ + /* Transaction Control (MXI) */ + mxi = (struct rcar_mxi *)MXI_BASE; + writel(0x00000013, &mxi->mxrtcr); + writel(0x00000013, &mxi->mxwtcr); + writel(0x00B800C0, &mxi->mxsaar0); + writel(0x02000800, &mxi->mxsaar1); + + /* QoS Control (MXI) */ + mxi_qos = (struct rcar_mxi_qos *)MXI_QOS_BASE; + writel(0x0000000C, &mxi_qos->vspdu0); + writel(0x0000000C, &mxi_qos->vspdu1); + writel(0x0000000E, &mxi_qos->du0); + writel(0x0000000E, &mxi_qos->du1); + + /* AXI -QoS */ + /* Transaction Control (MXI) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SYX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AVB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_G2D_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMP1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX0_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX1_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_IMUX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_LBS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MTSB1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002021, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_PCI_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_RTX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDS1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB20_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB21_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB22_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_USB30_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_AX2M_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CC50_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CCI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_CS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_DDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_ETH_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_MPXM_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SAT1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_SDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000214C, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_TRAB_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x000020A6, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM0_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI_UDM1_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (RT-AXI) */ + axi_qos = (struct rcar_axi_qos *)RT_AXI_SHX_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_DBG_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RDM_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002299, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RDS_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_RTX64TO128_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_STPRO_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002029, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)RT_AXI_SY2RT_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (MP-AXI) */ + axi_qos = (struct rcar_axi_qos *)MP_AXI_ADSP_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002037, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_ASDS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002014, &axi_qos->qosctset0); + writel(0x00000040, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MLP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPU_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x00002053, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MP_AXI_SPUC_BASE; + writel(0x00000000, &axi_qos->qosconf); + writel(0x0000206E, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (SYS-AXI256) */ + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_AXI128TO256_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_SYX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MPX_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)SYS_AXI256_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020EB, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (CCI-AXI) */ + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS0_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_SYX2_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUDS_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUM_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MXI_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x00002245, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUS1_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)CCI_AXI_MMUMP_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002004, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000000, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + /* QoS Register (Media-AXI) */ + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXR_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020dc, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_MXW_BASE; + writel(0x00000002, &axi_qos->qosconf); + writel(0x000020dc, &axi_qos->qosctset0); + writel(0x00002096, &axi_qos->qosctset1); + writel(0x00002030, &axi_qos->qosctset2); + writel(0x00002030, &axi_qos->qosctset3); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x000020AA, &axi_qos->qosthres0); + writel(0x00002032, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_JPW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_GCU1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_TDMW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPDU1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002190, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VIN0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00001FF0, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00002001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP0W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMSW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP1W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_IMRW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_FDP2W_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VSPD1W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x000020C8, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU0W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1R_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_DU1W_BASE; + writel(0x00000003, &axi_qos->qosconf); + writel(0x00002063, &axi_qos->qosctset0); + writel(0x00000001, &axi_qos->qosreqctr); + writel(0x00000001, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP0VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC0R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1CW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VR_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VCP1VW_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002004, &axi_qos->qosthres0); + writel(0x00000001, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); + + axi_qos = (struct rcar_axi_qos *)MEDIA_AXI_VPC1R_BASE; + writel(0x00000001, &axi_qos->qosconf); + writel(0x00002073, &axi_qos->qosctset0); + writel(0x00000020, &axi_qos->qosreqctr); + writel(0x00002064, &axi_qos->qosthres0); + writel(0x00002004, &axi_qos->qosthres1); + writel(0x00000001, &axi_qos->qosthres2); + writel(0x00000001, &axi_qos->qosqon); +} + +void qos_init(void) +{ + if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) + qos_init_es2(); + else + qos_init_es1(); +} -- cgit v1.1 From f212a8abf3dc3715b95ce3c187c7402ee40788e6 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 30 Jul 2014 12:28:00 +0900 Subject: arm: rmobile: lager: Fix CPU frequency setting Setting to change the CPU frequency is only used version2. Signed-off-by: Nobuhiro Iwamatsu --- board/renesas/lager/lager.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/renesas/lager/lager.c b/board/renesas/lager/lager.c index a5a0474..5302839 100644 --- a/board/renesas/lager/lager.c +++ b/board/renesas/lager/lager.c @@ -29,15 +29,17 @@ void s_init(void) { struct rcar_rwdt *rwdt = (struct rcar_rwdt *)RWDT_BASE; struct rcar_swdt *swdt = (struct rcar_swdt *)SWDT_BASE; - u32 stc; /* Watchdog init */ writel(0xA5A5A500, &rwdt->rwtcsra); writel(0xA5A5A500, &swdt->swtcsra); /* CPU frequency setting. Set to 1.4GHz */ - stc = ((1500 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) << PLL0_STC_BIT; - clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); + if (rmobile_get_cpu_rev_integer() >= R8A7790_CUT_ES2X) { + u32 stc = ((1400 / CLK2MHZ(CONFIG_SYS_CLK_FREQ)) - 1) + << PLL0_STC_BIT; + clrsetbits_le32(PLL0CR, PLL0_STC_MASK, stc); + } /* QoS(Quality-of-Service) Init */ qos_init(); -- cgit v1.1 From 7d2f669b94aa42579b5d5775dfb076bce0102e3f Mon Sep 17 00:00:00 2001 From: Nikita Kiryanov Date: Wed, 17 Sep 2014 15:59:25 +0300 Subject: compulab: eeprom: add default eeprom bus Add default eeprom bus setting. This addresses the trimslice compile error that was introduced with the addition of this setting. Cc: Albert ARIBAUD Cc: Igor Grinberg Signed-off-by: Nikita Kiryanov Acked-by: Igor Grinberg --- board/compulab/common/eeprom.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'board') diff --git a/board/compulab/common/eeprom.c b/board/compulab/common/eeprom.c index 85442cd..2df3ada 100644 --- a/board/compulab/common/eeprom.c +++ b/board/compulab/common/eeprom.c @@ -15,6 +15,10 @@ # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 #endif +#ifndef CONFIG_SYS_I2C_EEPROM_BUS +#define CONFIG_SYS_I2C_EEPROM_BUS 0 +#endif + #define EEPROM_LAYOUT_VER_OFFSET 44 #define BOARD_SERIAL_OFFSET 20 #define BOARD_SERIAL_OFFSET_LEGACY 8 -- cgit v1.1 From b719a08863dc865fbdd049f50eefeca52fc2cdcc Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Andreas=20Bie=C3=9Fmann?= Date: Thu, 18 Sep 2014 23:46:49 +0200 Subject: sama5d3xek: run PHY's config MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann Cc: Bo Shen --- board/atmel/sama5d3xek/sama5d3xek.c | 29 ++++++++++++++++++++--------- 1 file changed, 20 insertions(+), 9 deletions(-) (limited to 'board') diff --git a/board/atmel/sama5d3xek/sama5d3xek.c b/board/atmel/sama5d3xek/sama5d3xek.c index f53754b..ca4f79d 100644 --- a/board/atmel/sama5d3xek/sama5d3xek.c +++ b/board/atmel/sama5d3xek/sama5d3xek.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -273,15 +274,25 @@ int dram_init(void) int board_phy_config(struct phy_device *phydev) { - /* rx data delay */ - ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, 0x2222); - /* tx data delay */ - ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, 0x2222); - /* rx/tx clock delay */ - ksz9021_phy_extended_write(phydev, - MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, 0xf2f4); + /* board specific timings for GMAC */ + if (has_gmac()) { + /* rx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_RX_DATA_SKEW, + 0x2222); + /* tx data delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_TX_DATA_SKEW, + 0x2222); + /* rx/tx clock delay */ + ksz9021_phy_extended_write(phydev, + MII_KSZ9021_EXT_RGMII_CLOCK_SKEW, + 0xf2f4); + } + + /* always run the PHY's config routine */ + if (phydev->drv->config) + return phydev->drv->config(phydev); return 0; } -- cgit v1.1