From d52633047913d3d514244040c9f4fb50ff46836c Mon Sep 17 00:00:00 2001 From: Matthias Fuchs Date: Mon, 12 Jan 2015 22:47:26 +0100 Subject: ppc4xx: remove PMC405 board Signed-off-by: Matthias Fuchs --- board/esd/pmc405/Kconfig | 12 ---- board/esd/pmc405/MAINTAINERS | 6 -- board/esd/pmc405/Makefile | 13 ---- board/esd/pmc405/pmc405.c | 142 ------------------------------------------- 4 files changed, 173 deletions(-) delete mode 100644 board/esd/pmc405/Kconfig delete mode 100644 board/esd/pmc405/MAINTAINERS delete mode 100644 board/esd/pmc405/Makefile delete mode 100644 board/esd/pmc405/pmc405.c (limited to 'board') diff --git a/board/esd/pmc405/Kconfig b/board/esd/pmc405/Kconfig deleted file mode 100644 index 3738c68..0000000 --- a/board/esd/pmc405/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_PMC405 - -config SYS_BOARD - default "pmc405" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "PMC405" - -endif diff --git a/board/esd/pmc405/MAINTAINERS b/board/esd/pmc405/MAINTAINERS deleted file mode 100644 index 148a596..0000000 --- a/board/esd/pmc405/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PMC405 BOARD -M: Matthias Fuchs -S: Maintained -F: board/esd/pmc405/ -F: include/configs/PMC405.h -F: configs/PMC405_defconfig diff --git a/board/esd/pmc405/Makefile b/board/esd/pmc405/Makefile deleted file mode 100644 index ad98207..0000000 --- a/board/esd/pmc405/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -# -# (C) Copyright 2000-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# Objects for Xilinx JTAG programming (CPLD) -CPLD = ../common/xilinx_jtag/lenval.o \ - ../common/xilinx_jtag/micro.o \ - ../common/xilinx_jtag/ports.o - -obj-y = pmc405.o ../common/misc.o ../common/cmd_loadpci.o $(CPLD) diff --git a/board/esd/pmc405/pmc405.c b/board/esd/pmc405/pmc405.c deleted file mode 100644 index e67ff30..0000000 --- a/board/esd/pmc405/pmc405.c +++ /dev/null @@ -1,142 +0,0 @@ -/* - * (C) Copyright 2001-2003 - * Stefan Roese, DENX Software Engineering, sr@denx.de. - * - * (C) Copyright 2005-2009 - * Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -extern void lxt971_no_sleep(void); - -int board_early_init_f (void) -{ - /* - * IRQ 0-15 405GP internally generated; active high; level sensitive - * IRQ 16 405GP internally generated; active low; level sensitive - * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive - * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive - * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive - * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive - */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - mtdcr(UIC0ER, 0x00000000); /* disable all ints */ - mtdcr(UIC0CR, 0x00000000); /* set all to be non-critical*/ - mtdcr(UIC0PR, 0xFFFFFF81); /* set int polarities */ - mtdcr(UIC0TR, 0x10000000); /* set int trigger levels */ - mtdcr(UIC0VCR, 0x00000001); /* set vect base=0, INT0 highest priority */ - mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */ - - /* - * EBC Configuration Register: - * set ready timeout to 512 ebc-clks -> ca. 15 us - */ - mtebc (EBC0_CFG, 0xa8400000); - - /* - * Setup GPIO pins - */ - mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_FPGA_INIT | - CONFIG_SYS_FPGA_DONE | - CONFIG_SYS_XEREADY | - CONFIG_SYS_NONMONARCH | - CONFIG_SYS_REV1_2) << 5)); - - if (!(in_be32((void *)GPIO0_IR) & CONFIG_SYS_REV1_2)) { - /* rev 1.2 boards */ - mtdcr(CPC0_CR0, mfdcr(CPC0_CR0) | ((CONFIG_SYS_INTA_FAKE | - CONFIG_SYS_SELF_RST) << 5)); - } - - out_be32((void *)GPIO0_OR, CONFIG_SYS_VPEN); - /* setup for output */ - out_be32((void *)GPIO0_TCR, CONFIG_SYS_FPGA_PRG | CONFIG_SYS_FPGA_CLK | - CONFIG_SYS_FPGA_DATA | CONFIG_SYS_XEREADY | CONFIG_SYS_VPEN); - - /* - * - check if rev1_2 is low, then: - * - set/reset CONFIG_SYS_INTA_FAKE/CONFIG_SYS_SELF_RST - * in TCR to assert INTA# or SELFRST# - */ - return 0; -} - -int misc_init_r (void) -{ - /* adjust flash start and offset */ - gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize; - gd->bd->bi_flashoffset = 0; - - /* deassert EREADY# */ - out_be32((void *)GPIO0_OR, - in_be32((void *)GPIO0_OR) | CONFIG_SYS_XEREADY); - return (0); -} - -ushort pmc405_pci_subsys_deviceid(void) -{ - ulong val; - - val = in_be32((void *)GPIO0_IR); - if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ - /* check monarch# signal */ - if (val & CONFIG_SYS_NONMONARCH) - return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; - return CONFIG_SYS_PCI_SUBSYS_DEVICEID_MONARCH; - } - return CONFIG_SYS_PCI_SUBSYS_DEVICEID_NONMONARCH; -} - -/* - * Check Board Identity - */ -int checkboard (void) -{ - ulong val; - char str[64]; - int i = getenv_f("serial#", str, sizeof(str)); - - puts ("Board: "); - - if (i == -1) - puts ("### No HW ID - assuming PMC405"); - else - puts(str); - - val = in_be32((void *)GPIO0_IR); - if (!(val & CONFIG_SYS_REV1_2)) { /* low=rev1.2 */ - puts(" rev1.2 ("); - if (val & CONFIG_SYS_NONMONARCH) /* monarch# signal */ - puts("non-"); - puts("monarch)"); - } else - puts(" <=rev1.1"); - - putc ('\n'); - - return 0; -} - -void reset_phy(void) -{ -#ifdef CONFIG_LXT971_NO_SLEEP - - /* - * Disable sleep mode in LXT971 - */ - lxt971_no_sleep(); -#endif -} -- cgit v1.1