From e7300f463d0c5f414d4cb717cad925554564a92e Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Tue, 25 Mar 2014 14:49:48 +0100 Subject: ARM: OMAP: remove sr32() from OMAP board code Replace the custom sr32() bit manipulation function in arch/arm/cpu/armv7/omap3/board.c and board/ti/panda/panda.c by standard I/O accessors. Signed-off-by: Wolfgang Denk Cc: Tom Rini Cc: Albert ARIBAUD --- board/ti/panda/panda.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board') diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 5ab6db9..0dfb4ad 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -308,7 +308,7 @@ int ehci_hcd_init(int index, enum usb_init_type init, /* Now we can enable our port clocks */ utmi_clk = readl((void *)CM_L3INIT_HSUSBHOST_CLKCTRL); utmi_clk |= HSUSBHOST_CLKCTRL_CLKSEL_UTMI_P1_MASK; - sr32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, 0, 32, utmi_clk); + setbits_le32((void *)CM_L3INIT_HSUSBHOST_CLKCTRL, utmi_clk); ret = omap_ehci_hcd_init(index, &usbhs_bdata, hccr, hcor); if (ret < 0) -- cgit v1.1 From 8a0c6d6fa9de22c0c148492a8759bb456d52887c Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 28 Mar 2014 11:00:04 -0500 Subject: OMAP: common: consolidate fake USB ethernet MAC address creation TI platforms such as OMAP5uevm, PandaBoard, use equivalent logic to generate fake USB MAC address from device unique DIE ID. Consolidate this to a generic location such that other TI platforms such as BeagleBoard-XM can also use the same. NOTE: at this point in time, I dont yet see a need for a generic dummy ethernet MAC address creation function, but if there is a need in the future, this can be further abstracted out. Signed-off-by: Nishanth Menon --- board/ti/omap5_uevm/evm.c | 25 ++++++++----------------- board/ti/panda/panda.c | 21 ++++++--------------- 2 files changed, 14 insertions(+), 32 deletions(-) (limited to 'board') diff --git a/board/ti/omap5_uevm/evm.c b/board/ti/omap5_uevm/evm.c index 3eaa5ac..4666b38 100644 --- a/board/ti/omap5_uevm/evm.c +++ b/board/ti/omap5_uevm/evm.c @@ -119,28 +119,19 @@ static void enable_host_clocks(void) int misc_init_r(void) { int reg; - uint8_t device_mac[6]; + u32 id[4]; #ifdef CONFIG_PALMAS_POWER palmas_init_settings(); #endif - if (!getenv("usbethaddr")) { - reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; - - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - device_mac[0] = 0x02; - device_mac[1] = readl(reg + 0x10) & 0xff; - device_mac[2] = readl(reg + 0xC) & 0xff; - device_mac[3] = readl(reg + 0x8) & 0xff; - device_mac[4] = readl(reg) & 0xff; - device_mac[5] = (readl(reg) >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", device_mac); - } + reg = DIE_ID_REG_BASE + DIE_ID_REG_OFFSET; + + id[0] = readl(reg); + id[1] = readl(reg + 0x8); + id[2] = readl(reg + 0xC); + id[3] = readl(reg + 0x10); + usb_fake_mac_from_die_id(id); return 0; } diff --git a/board/ti/panda/panda.c b/board/ti/panda/panda.c index 0dfb4ad..16368cb 100644 --- a/board/ti/panda/panda.c +++ b/board/ti/panda/panda.c @@ -193,7 +193,7 @@ int misc_init_r(void) { int phy_type; u32 auxclk, altclksrc; - uint8_t device_mac[6]; + u32 id[4]; /* EHCI is not supported on ES1.0 */ if (omap_revision() == OMAP4430_ES1_0) @@ -247,20 +247,11 @@ int misc_init_r(void) writel(altclksrc, &scrm->altclksrc); - if (!getenv("usbethaddr")) { - /* - * create a fake MAC address from the processor ID code. - * first byte is 0x02 to signify locally administered. - */ - device_mac[0] = 0x02; - device_mac[1] = readl(STD_FUSE_DIE_ID_3) & 0xff; - device_mac[2] = readl(STD_FUSE_DIE_ID_2) & 0xff; - device_mac[3] = readl(STD_FUSE_DIE_ID_1) & 0xff; - device_mac[4] = readl(STD_FUSE_DIE_ID_0) & 0xff; - device_mac[5] = (readl(STD_FUSE_DIE_ID_0) >> 8) & 0xff; - - eth_setenv_enetaddr("usbethaddr", device_mac); - } + id[0] = readl(STD_FUSE_DIE_ID_0); + id[1] = readl(STD_FUSE_DIE_ID_1); + id[2] = readl(STD_FUSE_DIE_ID_2); + id[3] = readl(STD_FUSE_DIE_ID_3); + usb_fake_mac_from_die_id(id); return 0; } -- cgit v1.1 From 548a64d84561b109d45348afb4c854fd671eeedd Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Fri, 28 Mar 2014 11:00:06 -0500 Subject: OMAP3: beagle-xm: generate fake USB ethernet MAC address from dieid Similar to OMAP5uEVM, PandaBoard, BeagleBoard-XM has a USB based ethernet without MAC address embedded. So fake a MAC address following the similar strategy used on OMAP5 and PandaBoard family. Signed-off-by: Nishanth Menon --- board/ti/beagle/beagle.c | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'board') diff --git a/board/ti/beagle/beagle.c b/board/ti/beagle/beagle.c index 9669a32..0674afd 100644 --- a/board/ti/beagle/beagle.c +++ b/board/ti/beagle/beagle.c @@ -316,6 +316,7 @@ int misc_init_r(void) struct gpio *gpio5_base = (struct gpio *)OMAP34XX_GPIO5_BASE; struct gpio *gpio6_base = (struct gpio *)OMAP34XX_GPIO6_BASE; struct control_prog_io *prog_io_base = (struct control_prog_io *)OMAP34XX_CTRL_BASE; + bool generate_fake_mac = false; /* Enable i2c2 pullup resisters */ writel(~(PRG_I2C2_PULLUPRESX), &prog_io_base->io1); @@ -349,6 +350,7 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_VSEL_18, TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + generate_fake_mac = true; break; case REVISION_XM_C: printf("Beagle xM Rev C\n"); @@ -359,6 +361,7 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_VSEL_18, TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + generate_fake_mac = true; break; default: printf("Beagle unknown 0x%02x\n", get_board_revision()); @@ -368,6 +371,7 @@ int misc_init_r(void) TWL4030_PM_RECEIVER_VAUX2_VSEL_18, TWL4030_PM_RECEIVER_VAUX2_DEV_GRP, TWL4030_PM_RECEIVER_DEV_GRP_P1); + generate_fake_mac = true; } switch (get_expansion_id()) { @@ -486,6 +490,13 @@ int misc_init_r(void) musb_register(&musb_plat, &musb_board_data, (void *)MUSB_BASE); #endif + if (generate_fake_mac) { + u32 id[4]; + + get_dieid(id); + usb_fake_mac_from_die_id(id); + } + return 0; } -- cgit v1.1 From ba9a6708ec51c294a9674d6901a8be7c3ef76f57 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 28 Mar 2014 12:03:38 -0400 Subject: am335x_evm: Make SPL_OS also check the boot_os variable for falcon mode We use the same variable as a3m071 in the environment to determine if we should boot into Linux or U-Boot. This is useful on boards like Beaglebone Black or AM335x GP EVM where we have persistent storage for the environment. Signed-off-by: Tom Rini --- board/ti/am335x/board.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) (limited to 'board') diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index 554398f..ce7a8b0 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "board.h" DECLARE_GLOBAL_DATA_PTR; @@ -219,7 +220,17 @@ static struct emif_regs ddr3_evm_emif_reg_data = { int spl_start_uboot(void) { /* break into full u-boot on 'c' */ - return (serial_tstc() && serial_getc() == 'c'); + if (serial_tstc() && serial_getc() == 'c') + return 1; + +#ifdef CONFIG_SPL_ENV_SUPPORT + env_init(); + env_relocate_spec(); + if (getenv_yesno("boot_os") != 1) + return 1; +#endif + + return 0; } #endif -- cgit v1.1 From 0092fa01a7d74399a66dec1ff2cf7301f40ac60a Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 28 Mar 2014 12:03:41 -0400 Subject: a3m071: Make spl_start_uboot test like getenv_yesno does This change makes the behaviour slightly more rebust and will match other implementations which can use getenv_yesno directly. Acked-by: Stefan Roese Signed-off-by: Tom Rini --- board/a3m071/a3m071.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'board') diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c index 7aeefb2..b96ba81 100644 --- a/board/a3m071/a3m071.c +++ b/board/a3m071/a3m071.c @@ -412,7 +412,8 @@ int spl_start_uboot(void) env_init(); getenv_f("boot_os", s, sizeof(s)); - if ((s != NULL) && (strcmp(s, "yes") == 0)) + if ((s != NULL) && (*s == '1' || *s == 'y' || *s == 'Y' || + *s == 't' || *s == 'T')) return 0; return 1; -- cgit v1.1 From 79b079f35c31bab26e45a526bd128891ab6c5c1d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Thu, 3 Apr 2014 07:52:56 -0400 Subject: dra7xx_evm: Add QSPI_4 support, qspiboot build target We previously only supported QSPI_1 (single) support. Add QSPI_4 (quad) read support as well. This means we can be given one of two boot device values, but don't care which it is, so perform a fixup on the QSPI_4 value. We add a qspiboot build target to better show how you would use QSPI as a boot device in deployment. When we boot from QSPI, we can check the environment for 'boot_os' to control Falcon Mode. Signed-off-by: Sourav Poddar Signed-off-by: Tom Rini --- board/ti/dra7xx/evm.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'board') diff --git a/board/ti/dra7xx/evm.c b/board/ti/dra7xx/evm.c index c6c4fd1..073d151 100644 --- a/board/ti/dra7xx/evm.c +++ b/board/ti/dra7xx/evm.c @@ -16,6 +16,7 @@ #include #include #include +#include #include "mux_data.h" @@ -124,6 +125,24 @@ int board_mmc_init(bd_t *bis) } #endif +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OS_BOOT) +int spl_start_uboot(void) +{ + /* break into full u-boot on 'c' */ + if (serial_tstc() && serial_getc() == 'c') + return 1; + +#ifdef CONFIG_SPL_ENV_SUPPORT + env_init(); + env_relocate_spec(); + if (getenv_yesno("boot_os") != 1) + return 1; +#endif + + return 0; +} +#endif + #ifdef CONFIG_DRIVER_TI_CPSW /* Delay value to add to calibrated value */ -- cgit v1.1 From ef509b9063fb702ce69d1a64ff293698a04075d6 Mon Sep 17 00:00:00 2001 From: Vitaly Andrianov Date: Fri, 4 Apr 2014 13:16:53 -0400 Subject: k2hk: add support for k2hk SOC and EVM k2hk EVM is based on Texas Instruments Keystone2 Hawking/Kepler SoC. Keystone2 SoC has ARM v7 Cortex-A15 MPCore processor. Please refer the ti/k2hk_evm/README for details on the board, build and other information. This patch add support for keystone architecture and k2hk evm. Signed-off-by: Vitaly Andrianov Signed-off-by: Murali Karicheri Signed-off-by: WingMan Kwok Signed-off-by: Sandeep Nair --- board/ti/k2hk_evm/Makefile | 9 ++ board/ti/k2hk_evm/README | 122 +++++++++++++++++++++ board/ti/k2hk_evm/board.c | 236 +++++++++++++++++++++++++++++++++++++++ board/ti/k2hk_evm/ddr3.c | 268 +++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 635 insertions(+) create mode 100644 board/ti/k2hk_evm/Makefile create mode 100644 board/ti/k2hk_evm/README create mode 100644 board/ti/k2hk_evm/board.c create mode 100644 board/ti/k2hk_evm/ddr3.c (limited to 'board') diff --git a/board/ti/k2hk_evm/Makefile b/board/ti/k2hk_evm/Makefile new file mode 100644 index 0000000..3645f2f --- /dev/null +++ b/board/ti/k2hk_evm/Makefile @@ -0,0 +1,9 @@ +# +# K2HK-EVM: board Makefile +# (C) Copyright 2012-2014 +# Texas Instruments Incorporated, +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += board.o +obj-y += ddr3.o diff --git a/board/ti/k2hk_evm/README b/board/ti/k2hk_evm/README new file mode 100644 index 0000000..bfeb05b --- /dev/null +++ b/board/ti/k2hk_evm/README @@ -0,0 +1,122 @@ +U-Boot port for Texas Instruments XTCIEVMK2X +============================================ + +Author: Murali Karicheri + +This README has information on the u-boot port for XTCIEVMK2X EVM board. +Documentation for this board can be found at + http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx + +The board is based on Texas Instruments Keystone2 family of SoCs : K2H, K2K. +More details on these SoCs are available at company websites + K2K: http://www.ti.com/product/tci6638k2k + K2H: http://www.ti.com/product/tci6638k2h + +Board configuration: +==================== + +Some of the peripherals that are configured by u-boot are:- + +1. 2GB DDR3 (can support 8GB SO DIMM as well) +2. 512M NAND (over ti emif16 bus) +3. 6MB MSM SRAM (part of the SoC) +4. two 1GBit Ethernet ports (SoC supports upto 4) +5. two UART ports +6. three i2c interfaces +7. three spi interfaces (only 1 interface supported in driver) + +There are seperate PLLs to drive clocks to Tetris ARM and Peripherals. +To bring up SMP Linux on this board, there is a boot monitor +code that will be installed in MSMC SRAM. There is command available +to install this image from u-boot. + +The port related files can be found at following folders + keystone2 SoC related files: arch/arm/cpu/armv7/keystone/ + K2HK evm board files: board/ti/k2hk_evm/ + +board configuration file: include/configs/k2hk_evm.h + +Supported boot modes: + - SPI NOR boot + +Supported image formats:- + - u-boot.bin: for loading and running u-boot.bin through Texas instruments + code composure studio (CCS) + - u-boot-spi.gph: gpimage for programming SPI NOR flash for SPI NOR boot + +Build instructions: +=================== + +To build u-boot.bin + >make k2hk_evm_config + >make u-boot-spi.gph + +To build u-boot-spi.gph + >make k2hk_evm_config + >make u-boot-spi.gph + +Load and Run U-Boot on K2HK EVM using CCS +========================================= + +Need Code Composer Studio (CCS) installed on a PC to load and run u-boot.bin +on EVM. See instructions at below link for installing CCS on a Windows PC. +http://processors.wiki.ti.com/index.php/MCSDK_UG_Chapter_Getting_Started# +Installing_Code_Composer_Studio +Use u-boot.bin from the build folder for loading annd running u-boot binary +on EVM. Follow instructions at +http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup +to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode" +and Power ON the EVM. Follow instructions to connect serial port of EVM to +PC and start TeraTerm or Hyper Terminal. + +Start CCS on a Windows machine and Launch Target +configuration as instructed at http://processors.wiki.ti.com/index.php/ +MCSDK_UG_Chapter_Exploring#Loading_and_Running_U-Boot_on_EVM_through_CCS. +The instructions provided in the above link uses a script for +loading the u-boot binary on the target EVM. Instead do the following:- + +1. Right click to "Texas Instruments XDS2xx USB Emulator_0/CortexA15_1 core (D + isconnected: Unknown)" at the debug window (This is created once Target + configuration is launched) and select "Connect Target". +2. Once target connect is successful, choose Tools->Load Memory option from the + top level menu. At the Load Memory window, choose the file u-boot.bin + through "Browse" button and click "next >" button. In the next window, enter + Start address as 0xc001000, choose Type-size "32 bits" and click "Finish" + button. +3. Click View -> Registers from the top level menu to view registers window. +4. From Registers, window expand "Core Registers" to view PC. Edit PC value + to be 0xc001000. From the "Run" top level menu, select "Free Run" +5. The U-Boot prompt is shown at the Tera Term/ Hyper terminal console as + below and type any key to stop autoboot as instructed := + +U-Boot 2014.04-rc1-00201-gc215b5a (Mar 21 2014 - 12:47:59) + +I2C: ready +Detected SO-DIMM [SQR-SD3T-2G1333SED] +DRAM: 1.1 GiB +NAND: 512 MiB +Net: K2HK_EMAC +Warning: K2HK_EMAC using MAC address from net device +, K2HK_EMAC1, K2HK_EMAC2, K2HK_EMAC3 +Hit any key to stop autoboot: 0 + +SPI NOR Flash programming instructions +====================================== +U-Boot image can be flashed to first 512KB of the NOR flash using following +instructions:- + +1. Start CCS and run U-boot as described above. +2. Suspend Target. Select Run -> Suspend from top level menu + CortexA15_1 (Free Running)" +3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000 + through CCS as described in step 2 of "Load and Run U-Boot on K2HK EVM + using CCS", but using address 0x87000000. +4. Free Run the target as desribed earlier (step 4) to get u-boot prompt +5. At the U-Boot console type following to setup u-boot environment variables. + setenv addr_uboot 0x87000000 + setenv filesize + run burn_uboot + Once u-boot prompt is available, Power OFF the EVM. Set the SW1 dip switch + to "SPI Little Endian Boot mode" as per instruction at + http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup. +6. Power ON the EVM. The EVM now boots with u-boot image on the NOR flash. diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c new file mode 100644 index 0000000..aef67f4 --- /dev/null +++ b/board/ti/k2hk_evm/board.c @@ -0,0 +1,236 @@ +/* + * K2HK EVM : Board initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +u32 device_big_endian; + +unsigned int external_clk[ext_clk_count] = { + [sys_clk] = 122880000, + [alt_core_clk] = 125000000, + [pa_clk] = 122880000, + [tetris_clk] = 125000000, + [ddr3a_clk] = 100000000, + [ddr3b_clk] = 100000000, + [mcm_clk] = 312500000, + [pcie_clk] = 100000000, + [sgmii_srio_clk] = 156250000, + [xgmii_clk] = 156250000, + [usb_clk] = 100000000, + [rp1_clk] = 123456789 /* TODO: cannot find + what is that */ +}; + +static struct async_emif_config async_emif_config[ASYNC_EMIF_NUM_CS] = { + { /* CS0 */ + .mode = ASYNC_EMIF_MODE_NAND, + .wr_setup = 0xf, + .wr_strobe = 0x3f, + .wr_hold = 7, + .rd_setup = 0xf, + .rd_strobe = 0x3f, + .rd_hold = 7, + .turn_around = 3, + .width = ASYNC_EMIF_8, + }, + +}; + +static struct pll_init_data pll_config[] = { + CORE_PLL_1228, + PASS_PLL_983, + TETRIS_PLL_1200, +}; + +int dram_init(void) +{ + init_ddr3(); + + gd->ram_size = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, + CONFIG_MAX_RAM_BANK_SIZE); + init_async_emif(ARRAY_SIZE(async_emif_config), async_emif_config); + return 0; +} + +/* Byte swap the 32-bit data if the device is BE */ +int cpu_to_bus(u32 *ptr, u32 length) +{ + u32 i; + + if (device_big_endian) + for (i = 0; i < length; i++, ptr++) + *ptr = __swab32(*ptr); + + return 0; +} + +#if defined(CONFIG_BOARD_EARLY_INIT_F) +int board_early_init_f(void) +{ + init_plls(ARRAY_SIZE(pll_config), pll_config); + return 0; +} +#endif + +int board_init(void) +{ + gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; + + return 0; +} + +#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) +#define K2_DDR3_START_ADDR 0x80000000 +void ft_board_setup(void *blob, bd_t *bd) +{ + u64 start[2]; + u64 size[2]; + char name[32], *env, *endp; + int lpae, nodeoffset; + u32 ddr3a_size; + int nbanks; + + env = getenv("mem_lpae"); + lpae = env && simple_strtol(env, NULL, 0); + + ddr3a_size = 0; + if (lpae) { + env = getenv("ddr3a_size"); + if (env) + ddr3a_size = simple_strtol(env, NULL, 10); + if ((ddr3a_size != 8) && (ddr3a_size != 4)) + ddr3a_size = 0; + } + + nbanks = 1; + start[0] = bd->bi_dram[0].start; + size[0] = bd->bi_dram[0].size; + + /* adjust memory start address for LPAE */ + if (lpae) { + start[0] -= K2_DDR3_START_ADDR; + start[0] += CONFIG_SYS_LPAE_SDRAM_BASE; + } + + if ((size[0] == 0x80000000) && (ddr3a_size != 0)) { + size[1] = ((u64)ddr3a_size - 2) << 30; + start[1] = 0x880000000; + nbanks++; + } + + /* reserve memory at start of bank */ + sprintf(name, "mem_reserve_head"); + env = getenv(name); + if (env) { + start[0] += ustrtoul(env, &endp, 0); + size[0] -= ustrtoul(env, &endp, 0); + } + + sprintf(name, "mem_reserve"); + env = getenv(name); + if (env) + size[0] -= ustrtoul(env, &endp, 0); + + fdt_fixup_memory_banks(blob, start, size, nbanks); + + /* Fix up the initrd */ + if (lpae) { + u64 initrd_start, initrd_end; + u32 *prop1, *prop2; + int err; + nodeoffset = fdt_path_offset(blob, "/chosen"); + if (nodeoffset >= 0) { + prop1 = (u32 *)fdt_getprop(blob, nodeoffset, + "linux,initrd-start", NULL); + prop2 = (u32 *)fdt_getprop(blob, nodeoffset, + "linux,initrd-end", NULL); + if (prop1 && prop2) { + initrd_start = __be32_to_cpu(*prop1); + initrd_start -= K2_DDR3_START_ADDR; + initrd_start += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_start = __cpu_to_be64(initrd_start); + initrd_end = __be32_to_cpu(*prop2); + initrd_end -= K2_DDR3_START_ADDR; + initrd_end += CONFIG_SYS_LPAE_SDRAM_BASE; + initrd_end = __cpu_to_be64(initrd_end); + + err = fdt_delprop(blob, nodeoffset, + "linux,initrd-start"); + if (err < 0) + puts("error deleting initrd-start\n"); + + err = fdt_delprop(blob, nodeoffset, + "linux,initrd-end"); + if (err < 0) + puts("error deleting initrd-end\n"); + + err = fdt_setprop(blob, nodeoffset, + "linux,initrd-start", + &initrd_start, + sizeof(initrd_start)); + if (err < 0) + puts("error adding initrd-start\n"); + + err = fdt_setprop(blob, nodeoffset, + "linux,initrd-end", + &initrd_end, + sizeof(initrd_end)); + if (err < 0) + puts("error adding linux,initrd-end\n"); + } + } + } +} + +void ft_board_setup_ex(void *blob, bd_t *bd) +{ + int lpae; + char *env; + u64 *reserve_start, size; + + env = getenv("mem_lpae"); + lpae = env && simple_strtol(env, NULL, 0); + + if (lpae) { + /* + * the initrd and other reserved memory areas are + * embedded in in the DTB itslef. fix up these addresses + * to 36 bit format + */ + reserve_start = (u64 *)((char *)blob + + fdt_off_mem_rsvmap(blob)); + while (1) { + *reserve_start = __cpu_to_be64(*reserve_start); + size = __cpu_to_be64(*(reserve_start + 1)); + if (size) { + *reserve_start -= K2_DDR3_START_ADDR; + *reserve_start += + CONFIG_SYS_LPAE_SDRAM_BASE; + *reserve_start = + __cpu_to_be64(*reserve_start); + } else { + break; + } + reserve_start += 2; + } + } +} +#endif diff --git a/board/ti/k2hk_evm/ddr3.c b/board/ti/k2hk_evm/ddr3.c new file mode 100644 index 0000000..6092eb8 --- /dev/null +++ b/board/ti/k2hk_evm/ddr3.c @@ -0,0 +1,268 @@ +/* + * Keystone2: DDR3 initialization + * + * (C) Copyright 2012-2014 + * Texas Instruments Incorporated, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1600_64A = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x12868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1600_64 = { + .sdcfg = 0x6200CE6aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001869ul, +}; + +static struct ddr3_phy_config ddr3phy_1600_32 = { + .pllcr = 0x0001C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0D861A80ul, + .ptr4 = 0x0C827100ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0xA19DBB66ul, + .dtpr1 = 0x12868300ul, + .dtpr2 = 0x50035200ul, + .mr0 = 0x00001C70ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000018ul, + .dtcr = 0x730035C7ul, + .pgcr2 = 0x00F07A12ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1600_32 = { + .sdcfg = 0x6200DE6aul, + .sdtim1 = 0x16709C55ul, + .sdtim2 = 0x00001D4Aul, + .sdtim3 = 0x435DFF54ul, + .sdtim4 = 0x553F0CFFul, + .zqcfg = 0x70073200ul, + .sdrfc = 0x00001869ul, +}; + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1333_64A = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | + NOSRA_MASK | UDIMM_MASK), + .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1333_64 = { + .sdcfg = 0x62008C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0xF0073200ul, + .sdrfc = 0x00001457ul, +}; + +static struct ddr3_phy_config ddr3phy_1333_32 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | + NOSRA_MASK | UDIMM_MASK), + .dcr_val = ((1 << 10) | (1 << 27) | (1 << 29)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; + +static struct ddr3_emif_config ddr3_1333_32 = { + .sdcfg = 0x62009C62ul, + .sdtim1 = 0x125C8044ul, + .sdtim2 = 0x00001D29ul, + .sdtim3 = 0x32CDFF43ul, + .sdtim4 = 0x543F0ADFul, + .zqcfg = 0xf0073200ul, + .sdrfc = 0x00001457ul, +}; + +/************************* *****************************/ +static struct ddr3_phy_config ddr3phy_1333_64 = { + .pllcr = 0x0005C000ul, + .pgcr1_mask = (IODDRM_MASK | ZCKSEL_MASK), + .pgcr1_val = ((1 << 2) | (1 << 7) | (1 << 23)), + .ptr0 = 0x42C21590ul, + .ptr1 = 0xD05612C0ul, + .ptr2 = 0, /* not set in gel */ + .ptr3 = 0x0B4515C2ul, + .ptr4 = 0x0A6E08B4ul, + .dcr_mask = (PDQ_MASK | MPRDQ_MASK | BYTEMASK_MASK | NOSRA_MASK), + .dcr_val = ((1 << 10) | (1 << 27)), + .dtpr0 = 0x8558AA55ul, + .dtpr1 = 0x12857280ul, + .dtpr2 = 0x5002C200ul, + .mr0 = 0x00001A60ul, + .mr1 = 0x00000006ul, + .mr2 = 0x00000010ul, + .dtcr = 0x710035C7ul, + .pgcr2 = 0x00F065B8ul, + .zq0cr1 = 0x0000005Dul, + .zq1cr1 = 0x0000005Bul, + .zq2cr1 = 0x0000005Bul, + .pir_v1 = 0x00000033ul, + .pir_v2 = 0x0000FF81ul, +}; +/******************************************************/ +int get_dimm_params(char *dimm_name) +{ + u8 spd_params[256]; + int ret; + int old_bus; + + i2c_init(CONFIG_SYS_DAVINCI_I2C_SPEED, CONFIG_SYS_DAVINCI_I2C_SLAVE); + + old_bus = i2c_get_bus_num(); + i2c_set_bus_num(1); + + ret = i2c_read(0x53, 0, 1, spd_params, 256); + + i2c_set_bus_num(old_bus); + + dimm_name[0] = '\0'; + + if (ret) { + puts("Cannot read DIMM params\n"); + return 1; + } + + /* + * We need to convert spd data to dimm parameters + * and to DDR3 EMIF and PHY regirsters values. + * For now we just return DIMM type string value. + * Caller may use this value to choose appropriate + * a pre-set DDR3 configuration + */ + + strncpy(dimm_name, (char *)&spd_params[0x80], 18); + dimm_name[18] = '\0'; + + return 0; +} + +struct pll_init_data ddr3a_333 = DDR3_PLL_333(A); +struct pll_init_data ddr3b_333 = DDR3_PLL_333(B); +struct pll_init_data ddr3a_400 = DDR3_PLL_400(A); +struct pll_init_data ddr3b_400 = DDR3_PLL_400(B); + +void init_ddr3(void) +{ + char dimm_name[32]; + + get_dimm_params(dimm_name); + + printf("Detected SO-DIMM [%s]\n", dimm_name); + + if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) { + init_pll(&ddr3a_400); + if (cpu_revision() > 0) { + init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_64A); + init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_64); + printf("DRAM: Capacity 8 GiB (includes reported below)\n"); + } else { + init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1600_32); + init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1600_32); + printf("DRAM: Capacity 4 GiB (includes reported below)\n"); + } + } else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) { + init_pll(&ddr3a_333); + if (cpu_revision() > 0) { + init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_64A); + init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_64); + } else { + init_ddrphy(K2HK_DDR3A_DDRPHYC, &ddr3phy_1333_32); + init_ddremif(K2HK_DDR3A_EMIF_CTRL_BASE, &ddr3_1333_32); + } + } else { + printf("Unknown SO-DIMM. Cannot configure DDR3\n"); + while (1) + ; + } + + init_pll(&ddr3b_333); + init_ddrphy(K2HK_DDR3B_DDRPHYC, &ddr3phy_1333_64); + init_ddremif(K2HK_DDR3B_EMIF_CTRL_BASE, &ddr3_1333_64); +} -- cgit v1.1 From fc9a8e8d40e770b00383c2433c843fe68e38dad3 Mon Sep 17 00:00:00 2001 From: "Karicheri, Muralidharan" Date: Tue, 1 Apr 2014 15:01:13 -0400 Subject: keystone2: net: add keystone ethernet driver Ethernet driver configures the CPSW, SGMI and Phy and uses the the Navigator APIs. The driver supports 4 Ethernet ports and can work with only one port at a time. Port configurations are defined in board.c. Signed-off-by: Vitaly Andrianov Signed-off-by: Murali Karicheri Signed-off-by: WingMan Kwok --- board/ti/k2hk_evm/board.c | 65 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 65 insertions(+) (limited to 'board') diff --git a/board/ti/k2hk_evm/board.c b/board/ti/k2hk_evm/board.c index aef67f4..dc39139 100644 --- a/board/ti/k2hk_evm/board.c +++ b/board/ti/k2hk_evm/board.c @@ -17,6 +17,7 @@ #include #include #include +#include #include DECLARE_GLOBAL_DATA_PTR; @@ -70,6 +71,70 @@ int dram_init(void) return 0; } +#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET +struct eth_priv_t eth_priv_cfg[] = { + { + .int_name = "K2HK_EMAC", + .rx_flow = 22, + .phy_addr = 0, + .slave_port = 1, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC1", + .rx_flow = 23, + .phy_addr = 1, + .slave_port = 2, + .sgmii_link_type = SGMII_LINK_MAC_PHY, + }, + { + .int_name = "K2HK_EMAC2", + .rx_flow = 24, + .phy_addr = 2, + .slave_port = 3, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, + { + .int_name = "K2HK_EMAC3", + .rx_flow = 25, + .phy_addr = 3, + .slave_port = 4, + .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED, + }, +}; + +int get_eth_env_param(char *env_name) +{ + char *env; + int res = -1; + + env = getenv(env_name); + if (env) + res = simple_strtol(env, NULL, 0); + + return res; +} + +int board_eth_init(bd_t *bis) +{ + int j; + int res; + char link_type_name[32]; + + for (j = 0; j < (sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t)); + j++) { + sprintf(link_type_name, "sgmii%d_link_type", j); + res = get_eth_env_param(link_type_name); + if (res >= 0) + eth_priv_cfg[j].sgmii_link_type = res; + + keystone2_emac_initialize(ð_priv_cfg[j]); + } + + return 0; +} +#endif + /* Byte swap the 32-bit data if the device is BE */ int cpu_to_bus(u32 *ptr, u32 length) { -- cgit v1.1 From c2800b162bdf9ffa74bbff793bd7beb5bd903773 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 8 Apr 2014 09:50:52 -0500 Subject: OMAP3: zoom1: Configure GPMC for Ethernet zoom1 uses LAN9211 configured over GPMC Chip Select 1. Signed-off-by: Nishanth Menon --- board/logicpd/zoom1/zoom1.c | 18 ++++++++++++++++++ board/logicpd/zoom1/zoom1.h | 19 +++++++++++++------ 2 files changed, 31 insertions(+), 6 deletions(-) (limited to 'board') diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 9846f24..56e512f 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include #include @@ -26,6 +27,20 @@ DECLARE_GLOBAL_DATA_PTR; +/* gpmc_cfg is initialized by gpmc_init and we use it here */ +extern struct gpmc *gpmc_cfg; + +/* GPMC definitions for Ethenet Controller LAN9211 */ +static const u32 gpmc_lab_enet[] = { + ZOOM1_ENET_GPMC_CONF1, + ZOOM1_ENET_GPMC_CONF2, + ZOOM1_ENET_GPMC_CONF3, + ZOOM1_ENET_GPMC_CONF4, + ZOOM1_ENET_GPMC_CONF5, + ZOOM1_ENET_GPMC_CONF6, + /*CONF7- computed as params */ +}; + /* * Routine: board_init * Description: Early hardware init. @@ -33,6 +48,9 @@ DECLARE_GLOBAL_DATA_PTR; int board_init(void) { gpmc_init(); /* in SRAM or SDRAM, finish GPMC */ + /* CS1 is Ethernet LAN9211 */ + enable_gpmc_cs_config(gpmc_lab_enet, &gpmc_cfg->cs[1], + DEBUG_BASE, GPMC_SIZE_16M); /* board id for Linux */ gd->bd->bi_arch_number = MACH_TYPE_OMAP_LDP; /* boot param addr */ diff --git a/board/logicpd/zoom1/zoom1.h b/board/logicpd/zoom1/zoom1.h index 62ef94f..3a943df 100644 --- a/board/logicpd/zoom1/zoom1.h +++ b/board/logicpd/zoom1/zoom1.h @@ -17,6 +17,13 @@ const omap3_sysinfo sysinfo = { "NAND", }; +#define ZOOM1_ENET_GPMC_CONF1 0x00611000 +#define ZOOM1_ENET_GPMC_CONF2 0x001F1F01 +#define ZOOM1_ENET_GPMC_CONF3 0x00080803 +#define ZOOM1_ENET_GPMC_CONF4 0x1D091D09 +#define ZOOM1_ENET_GPMC_CONF5 0x041D1F1F +#define ZOOM1_ENET_GPMC_CONF6 0x1D0904C4 + /* * IEN - Input Enable * IDIS - Input Disable @@ -94,13 +101,13 @@ const omap3_sysinfo sysinfo = { MUX_VAL(CP(GPMC_D14), (IEN | PTD | DIS | M0)) /*GPMC_D14*/\ MUX_VAL(CP(GPMC_D15), (IEN | PTD | DIS | M0)) /*GPMC_D15*/\ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0)) /*GPMC_nCS0*/\ - MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M7)) /*GPMC_nCS1*/\ - MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | EN | M7)) /*GPMC_nCS2*/\ - MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | EN | M7)) /*GPMC_nCS3*/\ - MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | EN | M7)) /*GPMC_nCS4*/\ - MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M7)) /*GPMC_nCS5*/\ + MUX_VAL(CP(GPMC_NCS1), (IDIS | PTU | EN | M0)) /*GPMC_nCS1*/\ + MUX_VAL(CP(GPMC_NCS2), (IDIS | PTU | DIS | M7)) /*GPMC_nCS2*/\ + MUX_VAL(CP(GPMC_NCS3), (IEN | PTU | DIS | M4)) /*GPMC_nCS3 -> GPIO54*/\ + MUX_VAL(CP(GPMC_NCS4), (IDIS | PTU | DIS | M4)) /*GPMC_nCS4 -> GPIO 55*/\ + MUX_VAL(CP(GPMC_NCS5), (IDIS | PTD | DIS | M4)) /*GPMC_nCS5 -> GPIO 56*/\ MUX_VAL(CP(GPMC_NCS6), (IEN | PTD | DIS | M7)) /*GPMC_nCS6*/\ - MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M7)) /*GPMC_nCS7*/\ + MUX_VAL(CP(GPMC_NCS7), (IEN | PTU | EN | M1)) /*GPMC_nCS7 -> GPMC_IO_DIR*/\ MUX_VAL(CP(GPMC_CLK), (IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0)) /*GPMC_nADV_ALE*/\ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\ -- cgit v1.1 From 9d70e7728582836c7f09bc28a08f296566d17a53 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 8 Apr 2014 09:50:53 -0500 Subject: OMAP3: zoom1: enable LAN9211 Zoom1 was wrongly setup for LAN91C96. Fix it by enabling LAN9211. Signed-off-by: Nishanth Menon --- board/logicpd/zoom1/zoom1.c | 20 ++++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-) (limited to 'board') diff --git a/board/logicpd/zoom1/zoom1.c b/board/logicpd/zoom1/zoom1.c index 56e512f..461a852 100644 --- a/board/logicpd/zoom1/zoom1.c +++ b/board/logicpd/zoom1/zoom1.c @@ -102,9 +102,25 @@ int board_mmc_init(bd_t *bis) int board_eth_init(bd_t *bis) { int rc = 0; -#ifdef CONFIG_LAN91C96 - rc = lan91c96_initialize(0, CONFIG_LAN91C96_BASE); + +#ifdef CONFIG_SMC911X +#define STR_ENV_ETHADDR "ethaddr" + + struct eth_device *dev; + uchar eth_addr[6]; + + rc = smc911x_initialize(0, CONFIG_SMC911X_BASE); + if (!eth_getenv_enetaddr(STR_ENV_ETHADDR, eth_addr)) { + dev = eth_get_dev_by_index(0); + if (dev) { + eth_setenv_enetaddr(STR_ENV_ETHADDR, dev->enetaddr); + } else { + printf("zoom1: Couldn't get eth device\n"); + rc = -1; + } + } #endif + return rc; } #endif -- cgit v1.1 From 161d2d5ea8262e97cac77eec3ed7d32069cb7444 Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Tue, 8 Apr 2014 09:50:58 -0500 Subject: omap3: zoom1: switch to generic ti_omap3_common config header ti_omap3_common contains a lot of common header definitions that help reduce the size of the zoom1 config file. So, use the generic header and customize as needed for the platform (example: no spl). Signed-off-by: Nishanth Menon --- board/logicpd/zoom1/config.mk | 1 - 1 file changed, 1 deletion(-) (limited to 'board') diff --git a/board/logicpd/zoom1/config.mk b/board/logicpd/zoom1/config.mk index f5a19ed..c7ebfd9 100644 --- a/board/logicpd/zoom1/config.mk +++ b/board/logicpd/zoom1/config.mk @@ -14,4 +14,3 @@ # (mem base + reserved) # For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80008000 -- cgit v1.1 From d0e6d34d7cca00cb61707826b52837cc7c43da46 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Wed, 9 Apr 2014 08:25:57 -0400 Subject: am335x: Switch to CONFIG_SKIP_LOWLEVEL_INIT from guarding SPL or NOR_BOOT In the case of SPL or NOR_BOOT (no SPL involved) we need to include certain code in the build. Use !CONFIG_SKIP_LOWLEVEL_INIT rather than CONFIG_SPL_BUILD || CONFIG_NOR_BOOT to make the code clearer, and to make supporting XIP QSPI boot clearer in the code. Signed-off-by: Tom Rini Reviewed-by: Wolfgang Denk --- board/silica/pengwyn/Makefile | 2 +- board/ti/am335x/Makefile | 2 +- board/ti/am335x/board.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/silica/pengwyn/Makefile b/board/silica/pengwyn/Makefile index c8b4f9a..804ac37 100644 --- a/board/silica/pengwyn/Makefile +++ b/board/silica/pengwyn/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y) +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) obj-y := mux.o endif diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile index c8b4f9a..804ac37 100644 --- a/board/ti/am335x/Makefile +++ b/board/ti/am335x/Makefile @@ -6,7 +6,7 @@ # SPDX-License-Identifier: GPL-2.0+ # -ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_NOR_BOOT),y) +ifeq ($(CONFIG_SKIP_LOWLEVEL_INIT),) obj-y := mux.o endif diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c index ce7a8b0..da780ed 100644 --- a/board/ti/am335x/board.c +++ b/board/ti/am335x/board.c @@ -82,7 +82,7 @@ static int read_eeprom(struct am335x_baseboard_id *header) return 0; } -#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT) +#ifndef CONFIG_SKIP_LOWLEVEL_INIT static const struct ddr_data ddr2_data = { .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) | (MT47H128M16RT25E_RD_DQS<<20) | -- cgit v1.1