From 1332a2a0694c8e10a5bade397cf83645b2c3fd7e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:07:59 +0100 Subject: at91sam9/at91cap: move common serial initialisation to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/afeb9260/afeb9260.c | 30 ++---------------------------- board/atmel/at91cap9adk/at91cap9adk.c | 30 ++---------------------------- board/atmel/at91sam9260ek/at91sam9260ek.c | 30 ++---------------------------- board/atmel/at91sam9261ek/at91sam9261ek.c | 30 ++---------------------------- board/atmel/at91sam9263ek/at91sam9263ek.c | 30 ++---------------------------- board/atmel/at91sam9rlek/at91sam9rlek.c | 30 ++---------------------------- 6 files changed, 12 insertions(+), 168 deletions(-) (limited to 'board') diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index 32445ab..dd29d91 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -44,33 +45,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void afeb9260_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - static void afeb9260_nand_hw_init(void) { unsigned long csa; @@ -201,7 +175,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - afeb9260_serial_hw_init(); + at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND afeb9260_nand_hw_init(); #endif diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index f7d68b7..18a0e9d 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -47,33 +48,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void at91cap9_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PA22, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - static void at91cap9_slowclock_hw_init(void) { /* @@ -367,7 +341,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91cap9_serial_hw_init(); + at91_serial_hw_init(); at91cap9_slowclock_hw_init(); at91cap9_nor_hw_init(); #ifdef CONFIG_CMD_NAND diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ef99b8b..985daf7 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -43,33 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void at91sam9260ek_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - #ifdef CONFIG_CMD_NAND static void at91sam9260ek_nand_hw_init(void) { @@ -217,7 +191,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91sam9260ek_serial_hw_init(); + at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9260ek_nand_hw_init(); #endif diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 14f236d..5fe3d3f 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -43,33 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void at91sam9261ek_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - #ifdef CONFIG_CMD_NAND static void at91sam9261ek_nand_hw_init(void) { @@ -250,7 +224,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91sam9261ek_serial_hw_init(); + at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9261ek_nand_hw_init(); #endif diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index ebd4649..37634a8 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -27,6 +27,7 @@ #include #include #include +#include #include #include #include @@ -46,33 +47,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void at91sam9263ek_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - #ifdef CONFIG_CMD_NAND static void at91sam9263ek_nand_hw_init(void) { @@ -301,7 +275,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91sam9263ek_serial_hw_init(); + at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9263ek_nand_hw_init(); #endif diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index b6fef9d..26395a2 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -43,33 +44,6 @@ DECLARE_GLOBAL_DATA_PTR; * Miscelaneous platform dependent initialisations */ -static void at91sam9rlek_serial_hw_init(void) -{ -#ifdef CONFIG_USART0 - at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US0); -#endif - -#ifdef CONFIG_USART1 - at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US1); -#endif - -#ifdef CONFIG_USART2 - at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_US2); -#endif - -#ifdef CONFIG_USART3 /* DBGU */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */ - at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91_ID_SYS); -#endif -} - #ifdef CONFIG_CMD_NAND static void at91sam9rlek_nand_hw_init(void) { @@ -223,7 +197,7 @@ int board_init(void) /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; - at91sam9rlek_serial_hw_init(); + at91_serial_hw_init(); #ifdef CONFIG_CMD_NAND at91sam9rlek_nand_hw_init(); #endif -- cgit v1.1 From 7ebafb7ec1a0285af8380623c009576f92583b98 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:07:59 +0100 Subject: at91sam9/at91cap: move common spi initialisation to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/afeb9260/afeb9260.c | 15 +-------------- board/atmel/at91cap9adk/at91cap9adk.c | 16 +--------------- board/atmel/at91sam9260ek/at91sam9260ek.c | 17 +---------------- board/atmel/at91sam9261ek/at91sam9261ek.c | 16 +--------------- board/atmel/at91sam9263ek/at91sam9263ek.c | 17 ++--------------- board/atmel/at91sam9rlek/at91sam9rlek.c | 16 +--------------- 6 files changed, 7 insertions(+), 90 deletions(-) (limited to 'board') diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index dd29d91..0f9c504 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -78,19 +78,6 @@ static void afeb9260_nand_hw_init(void) at91_set_gpio_output(AT91_PIN_PC14, 1); } -static void afeb9260_spi_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ - at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ - - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); -} - #ifdef CONFIG_MACB static void afeb9260_macb_hw_init(void) { @@ -179,7 +166,7 @@ int board_init(void) #ifdef CONFIG_CMD_NAND afeb9260_nand_hw_init(); #endif - afeb9260_spi_hw_init(); + at91_spi0_hw_init((1 << 0) || (1 << 1)); #ifdef CONFIG_MACB afeb9260_macb_hw_init(); #endif diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 18a0e9d..b1e9c62 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -137,20 +137,6 @@ static void at91cap9_nand_hw_init(void) } #endif -#ifdef CONFIG_HAS_DATAFLASH -static void at91cap9_spi_hw_init(void) -{ - at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ - - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_SPI0); -} -#endif - #ifdef CONFIG_MACB static void at91cap9_macb_hw_init(void) { @@ -348,7 +334,7 @@ int board_init(void) at91cap9_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH - at91cap9_spi_hw_init(); + at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_MACB at91cap9_macb_hw_init(); diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index 985daf7..ad9dfeb 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -83,21 +83,6 @@ static void at91sam9260ek_nand_hw_init(void) } #endif -#ifdef CONFIG_HAS_DATAFLASH -static void at91sam9260ek_spi_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ - at91_set_B_periph(AT91_PIN_PC11, 0); /* SPI0_NPCS1 */ - - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_SPI0); -} -#endif - #ifdef CONFIG_MACB static void at91sam9260ek_macb_hw_init(void) { @@ -196,7 +181,7 @@ int board_init(void) at91sam9260ek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH - at91sam9260ek_spi_hw_init(); + at91_spi0_hw_init((1 << 0) || (1 << 1)); #endif #ifdef CONFIG_MACB at91sam9260ek_macb_hw_init(); diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index 5fe3d3f..d8f006c 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -86,20 +86,6 @@ static void at91sam9261ek_nand_hw_init(void) } #endif -#ifdef CONFIG_HAS_DATAFLASH -static void at91sam9261ek_spi_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PA3, 0); /* SPI0_NPCS0 */ - - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_SPI0); -} -#endif - #ifdef CONFIG_DRIVER_DM9000 static void at91sam9261ek_dm9000_hw_init(void) { @@ -229,7 +215,7 @@ int board_init(void) at91sam9261ek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH - at91sam9261ek_spi_hw_init(); + at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_DRIVER_DM9000 at91sam9261ek_dm9000_hw_init(); diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 37634a8..1a3e39c 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -87,20 +87,6 @@ static void at91sam9263ek_nand_hw_init(void) } #endif -#ifdef CONFIG_HAS_DATAFLASH -static void at91sam9263ek_spi_hw_init(void) -{ - at91_set_B_periph(AT91_PIN_PA5, 0); /* SPI0_NPCS0 */ - - at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_SPI0); -} -#endif - #ifdef CONFIG_MACB static void at91sam9263ek_macb_hw_init(void) { @@ -280,7 +266,8 @@ int board_init(void) at91sam9263ek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH - at91sam9263ek_spi_hw_init(); + at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */ + at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_MACB at91sam9263ek_macb_hw_init(); diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index 26395a2..ce10cdf 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -86,20 +86,6 @@ static void at91sam9rlek_nand_hw_init(void) } #endif -#ifdef CONFIG_HAS_DATAFLASH -static void at91sam9rlek_spi_hw_init(void) -{ - at91_set_A_periph(AT91_PIN_PA28, 0); /* SPI0_NPCS0 */ - - at91_set_A_periph(AT91_PIN_PA25, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA26, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA27, 0); /* SPI0_SPCK */ - - /* Enable clock */ - at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_SPI); -} -#endif - #ifdef CONFIG_LCD vidinfo_t panel_info = { vl_col: 240, @@ -202,7 +188,7 @@ int board_init(void) at91sam9rlek_nand_hw_init(); #endif #ifdef CONFIG_HAS_DATAFLASH - at91sam9rlek_spi_hw_init(); + at91_spi0_hw_init(1 << 0); #endif #ifdef CONFIG_LCD at91sam9rlek_lcd_hw_init(); -- cgit v1.1 From a484b00b86e72ac6da6ee4fce13dbc6b256672fe Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:08:00 +0100 Subject: at91sam9/at91cap: move common led management to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/atmel/at91cap9adk/led.c | 46 ++++++---------------------------------- board/atmel/at91sam9260ek/led.c | 31 ++++----------------------- board/atmel/at91sam9261ek/led.c | 47 ++++++----------------------------------- board/atmel/at91sam9263ek/led.c | 46 ++++++---------------------------------- board/atmel/at91sam9rlek/led.c | 46 ++++++---------------------------------- 5 files changed, 28 insertions(+), 188 deletions(-) (limited to 'board') diff --git a/board/atmel/at91cap9adk/led.c b/board/atmel/at91cap9adk/led.c index a137c2a..14aea99 100644 --- a/board/atmel/at91cap9adk/led.c +++ b/board/atmel/at91cap9adk/led.c @@ -28,50 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PC29 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA10 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PA11 /* this is the user1 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91CAP9_ID_PIOABCD); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_output(RED_LED, 0); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 0); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9260ek/led.c b/board/atmel/at91sam9260ek/led.c index ddc375f..2424d27 100644 --- a/board/atmel/at91sam9260ek/led.c +++ b/board/atmel/at91sam9260ek/led.c @@ -28,37 +28,14 @@ #include #include -#define RED_LED AT91_PIN_PA9 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA6 /* this is the user led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOA); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); } diff --git a/board/atmel/at91sam9261ek/led.c b/board/atmel/at91sam9261ek/led.c index eb2bb23..5d1c5f2 100644 --- a/board/atmel/at91sam9261ek/led.c +++ b/board/atmel/at91sam9261ek/led.c @@ -28,51 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PA23 /* this is the power led */ -#define GREEN_LED AT91_PIN_PA13 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PA14 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOA); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9263ek/led.c b/board/atmel/at91sam9263ek/led.c index eb8d6ca..82c5388 100644 --- a/board/atmel/at91sam9263ek/led.c +++ b/board/atmel/at91sam9263ek/led.c @@ -28,51 +28,17 @@ #include #include -#define RED_LED AT91_PIN_PB7 /* this is the power led */ -#define GREEN_LED AT91_PIN_PB8 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PC29 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9263_ID_PIOB | 1 << AT91SAM9263_ID_PIOCDE); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } diff --git a/board/atmel/at91sam9rlek/led.c b/board/atmel/at91sam9rlek/led.c index 8a7d8e0..9634cc0 100644 --- a/board/atmel/at91sam9rlek/led.c +++ b/board/atmel/at91sam9rlek/led.c @@ -28,50 +28,16 @@ #include #include -#define RED_LED AT91_PIN_PD14 /* this is the power led */ -#define GREEN_LED AT91_PIN_PD15 /* this is the user1 led */ -#define YELLOW_LED AT91_PIN_PD16 /* this is the user2 led */ - -void red_LED_on(void) -{ - at91_set_gpio_value(RED_LED, 1); -} - -void red_LED_off(void) -{ - at91_set_gpio_value(RED_LED, 0); -} - -void green_LED_on(void) -{ - at91_set_gpio_value(GREEN_LED, 0); -} - -void green_LED_off(void) -{ - at91_set_gpio_value(GREEN_LED, 1); -} - -void yellow_LED_on(void) -{ - at91_set_gpio_value(YELLOW_LED, 0); -} - -void yellow_LED_off(void) -{ - at91_set_gpio_value(YELLOW_LED, 1); -} - void coloured_LED_init(void) { /* Enable clock */ at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); - at91_set_gpio_output(RED_LED, 1); - at91_set_gpio_output(GREEN_LED, 1); - at91_set_gpio_output(YELLOW_LED, 1); + at91_set_gpio_output(CONFIG_RED_LED, 1); + at91_set_gpio_output(CONFIG_GREEN_LED, 1); + at91_set_gpio_output(CONFIG_YELLOW_LED, 1); - at91_set_gpio_value(RED_LED, 0); - at91_set_gpio_value(GREEN_LED, 1); - at91_set_gpio_value(YELLOW_LED, 1); + at91_set_gpio_value(CONFIG_RED_LED, 0); + at91_set_gpio_value(CONFIG_GREEN_LED, 1); + at91_set_gpio_value(CONFIG_YELLOW_LED, 1); } -- cgit v1.1 From f3f91f886bc8927fd692ac411b7423a87ffec532 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:08:00 +0100 Subject: at91sam9/at91cap: move common usb host initialisation to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/atmel/at91sam9263ek/at91sam9263ek.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-) (limited to 'board') diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 1a3e39c..59ace17 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -154,15 +154,6 @@ static void at91sam9263ek_macb_hw_init(void) } #endif -#ifdef CONFIG_USB_OHCI_NEW -static void at91sam9263ek_uhp_hw_init(void) -{ - /* Enable VBus on UHP ports */ - at91_set_gpio_output(AT91_PIN_PA21, 0); - at91_set_gpio_output(AT91_PIN_PA24, 0); -} -#endif - #ifdef CONFIG_LCD vidinfo_t panel_info = { vl_col: 240, @@ -273,7 +264,7 @@ int board_init(void) at91sam9263ek_macb_hw_init(); #endif #ifdef CONFIG_USB_OHCI_NEW - at91sam9263ek_uhp_hw_init(); + at91_uhp_hw_init(); #endif #ifdef CONFIG_LCD at91sam9263ek_lcd_hw_init(); -- cgit v1.1 From e2c0476f958f8e0b269a1118f4ba4a5cd475aa56 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:08:00 +0100 Subject: at91sam9/at91cap: move common macb initialisation to cpu Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/afeb9260/afeb9260.c | 23 +--------------------- board/atmel/at91cap9adk/at91cap9adk.c | 23 ++-------------------- board/atmel/at91sam9260ek/at91sam9260ek.c | 32 +------------------------------ board/atmel/at91sam9263ek/at91sam9263ek.c | 23 +--------------------- 4 files changed, 5 insertions(+), 96 deletions(-) (limited to 'board') diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index 0f9c504..ba60861 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -127,28 +127,7 @@ static void afeb9260_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), pin_to_controller(AT91_PIN_PA0) + PIO_PUER); - at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ -#endif - + at91_macb_hw_init(); } #endif diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index b1e9c62..46a4fce 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -177,27 +177,8 @@ static void at91cap9_macb_hw_init(void) pin_to_mask(AT91_PIN_PB26), pin_to_controller(AT91_PIN_PA0) + PIO_PUER); - at91_set_A_periph(AT91_PIN_PB21, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PB22, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PB25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PB26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PB27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PB28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PB23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PB24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PB30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PB29, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_B_periph(AT91_PIN_PC25, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ -#endif + at91_macb_hw_init(); + /* Unlock EMAC, 3 0 2 1 sequence */ #define MP_MAC_KEY0 0x5969cb2a #define MP_MAC_KEY1 0xb4a1872e diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ad9dfeb..d89f247 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -132,37 +132,7 @@ static void at91sam9260ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PA28), pin_to_controller(AT91_PIN_PA0) + PIO_PUER); - at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */ -#if defined(CONFIG_AT91SAM9260EK) - /* - * use PA10, PA11 for ETX2, ETX3. - * PA23 and PA24 are for TWI EEPROM - */ - at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ -#else - at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */ -#endif - at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */ -#endif - + at91_macb_hw_init(); } #endif diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 59ace17..9110e9e 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -129,28 +129,7 @@ static void at91sam9263ek_macb_hw_init(void) pin_to_mask(AT91_PIN_PE26), pin_to_controller(AT91_PIN_PE0) + PIO_PUER); - at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */ - at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */ - -#ifndef CONFIG_RMII - at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */ - at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */ - at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */ - at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */ - at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */ - at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */ - at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */ - at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */ -#endif - + at91_macb_hw_init(); } #endif -- cgit v1.1 From 163966087d62680547f188a93c61d01c8155254e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sat, 21 Mar 2009 21:08:01 +0100 Subject: atmel/at91/boards: compile dataflash partition only when dataflash is Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/atmel/at91cap9adk/Makefile | 2 +- board/atmel/at91sam9260ek/Makefile | 2 +- board/atmel/at91sam9261ek/Makefile | 2 +- board/atmel/at91sam9263ek/Makefile | 2 +- board/atmel/at91sam9rlek/Makefile | 2 +- 5 files changed, 5 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index 2d2ff2c..d253649 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91cap9adk.o COBJS-y += led.o -COBJS-y += partition.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index 7c8a612..2e65434 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9260ek.o COBJS-y += led.o -COBJS-y += partition.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index d7b063d..edeb648 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9261ek.o COBJS-y += led.o -COBJS-y += partition.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index 00a6b00..d0d4272 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9263ek.o COBJS-y += led.o -COBJS-y += partition.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile index 90029cb..3dbee27 100644 --- a/board/atmel/at91sam9rlek/Makefile +++ b/board/atmel/at91sam9rlek/Makefile @@ -31,7 +31,7 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9rlek.o COBJS-y += led.o -COBJS-y += partition.o +COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) -- cgit v1.1 From 74c076d6c33d6d42ab065541a38383587879e7b7 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 22 Mar 2009 10:22:34 +0100 Subject: at91sam9/at91cap: move nand drivers to drivers/mtd/nand Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/afeb9260/Makefile | 1 - board/afeb9260/afeb9260.c | 4 +- board/afeb9260/nand.c | 78 ------------------------------- board/atmel/at91cap9adk/Makefile | 1 - board/atmel/at91cap9adk/at91cap9adk.c | 2 +- board/atmel/at91cap9adk/nand.c | 72 ---------------------------- board/atmel/at91sam9260ek/Makefile | 1 - board/atmel/at91sam9260ek/at91sam9260ek.c | 4 +- board/atmel/at91sam9260ek/nand.c | 78 ------------------------------- board/atmel/at91sam9261ek/Makefile | 1 - board/atmel/at91sam9261ek/at91sam9261ek.c | 4 +- board/atmel/at91sam9261ek/nand.c | 78 ------------------------------- board/atmel/at91sam9263ek/Makefile | 1 - board/atmel/at91sam9263ek/at91sam9263ek.c | 4 +- board/atmel/at91sam9263ek/nand.c | 78 ------------------------------- board/atmel/at91sam9rlek/Makefile | 1 - board/atmel/at91sam9rlek/at91sam9rlek.c | 4 +- board/atmel/at91sam9rlek/nand.c | 78 ------------------------------- 18 files changed, 11 insertions(+), 479 deletions(-) delete mode 100644 board/afeb9260/nand.c delete mode 100644 board/atmel/at91cap9adk/nand.c delete mode 100644 board/atmel/at91sam9260ek/nand.c delete mode 100644 board/atmel/at91sam9261ek/nand.c delete mode 100644 board/atmel/at91sam9263ek/nand.c delete mode 100644 board/atmel/at91sam9rlek/nand.c (limited to 'board') diff --git a/board/afeb9260/Makefile b/board/afeb9260/Makefile index 60c4304..73187fb 100644 --- a/board/afeb9260/Makefile +++ b/board/afeb9260/Makefile @@ -31,7 +31,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += afeb9260.o COBJS-y += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/afeb9260/afeb9260.c b/board/afeb9260/afeb9260.c index ba60861..024db2b 100644 --- a/board/afeb9260/afeb9260.c +++ b/board/afeb9260/afeb9260.c @@ -72,10 +72,10 @@ static void afeb9260_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #ifdef CONFIG_MACB diff --git a/board/afeb9260/nand.c b/board/afeb9260/nand.c deleted file mode 100644 index c5ac634..0000000 --- a/board/afeb9260/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC13); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91cap9adk/Makefile b/board/atmel/at91cap9adk/Makefile index d253649..2496f9b 100644 --- a/board/atmel/at91cap9adk/Makefile +++ b/board/atmel/at91cap9adk/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91cap9adk.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91cap9adk/at91cap9adk.c b/board/atmel/at91cap9adk/at91cap9adk.c index 46a4fce..e8025e7 100644 --- a/board/atmel/at91cap9adk/at91cap9adk.c +++ b/board/atmel/at91cap9adk/at91cap9adk.c @@ -133,7 +133,7 @@ static void at91cap9_nand_hw_init(void) /* RDY/BSY is not connected */ /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91cap9adk/nand.c b/board/atmel/at91cap9adk/nand.c deleted file mode 100644 index cc2263b..0000000 --- a/board/atmel/at91cap9adk/nand.c +++ /dev/null @@ -1,72 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91cap9adk_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91cap9adk_nand_hwcontrol; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9260ek/Makefile b/board/atmel/at91sam9260ek/Makefile index 2e65434..aaa3240 100644 --- a/board/atmel/at91sam9260ek/Makefile +++ b/board/atmel/at91sam9260ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9260ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index d89f247..ae00c53 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -76,10 +76,10 @@ static void at91sam9260ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9260_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC13, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9260ek/nand.c b/board/atmel/at91sam9260ek/nand.c deleted file mode 100644 index c5ac634..0000000 --- a/board/atmel/at91sam9260ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9260ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9260ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC13); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9260ek_nand_hwcontrol; - nand->dev_ready = at91sam9260ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9261ek/Makefile b/board/atmel/at91sam9261ek/Makefile index edeb648..d9b3a79 100644 --- a/board/atmel/at91sam9261ek/Makefile +++ b/board/atmel/at91sam9261ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9261ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9261ek/at91sam9261ek.c b/board/atmel/at91sam9261ek/at91sam9261ek.c index d8f006c..bae4092 100644 --- a/board/atmel/at91sam9261ek/at91sam9261ek.c +++ b/board/atmel/at91sam9261ek/at91sam9261ek.c @@ -76,10 +76,10 @@ static void at91sam9261ek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9261_ID_PIOC); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PC15, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PC14, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9261ek/nand.c b/board/atmel/at91sam9261ek/nand.c deleted file mode 100644 index 06395ee..0000000 --- a/board/atmel/at91sam9261ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 22) /* our ALE is AD22 */ -#define MASK_CLE (1 << 21) /* our CLE is AD21 */ - -static void at91sam9261ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PC14, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9261ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PC15); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9261ek_nand_hwcontrol; - nand->dev_ready = at91sam9261ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9263ek/Makefile b/board/atmel/at91sam9263ek/Makefile index d0d4272..013ed21 100644 --- a/board/atmel/at91sam9263ek/Makefile +++ b/board/atmel/at91sam9263ek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9263ek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9263ek/at91sam9263ek.c b/board/atmel/at91sam9263ek/at91sam9263ek.c index 9110e9e..1d52845 100644 --- a/board/atmel/at91sam9263ek/at91sam9263ek.c +++ b/board/atmel/at91sam9263ek/at91sam9263ek.c @@ -80,10 +80,10 @@ static void at91sam9263ek_nand_hw_init(void) 1 << AT91SAM9263_ID_PIOCDE); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PA22, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PD15, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); } #endif diff --git a/board/atmel/at91sam9263ek/nand.c b/board/atmel/at91sam9263ek/nand.c deleted file mode 100644 index 3c247f6..0000000 --- a/board/atmel/at91sam9263ek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9263ek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9263ek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PA22); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9263ek_nand_hwcontrol; - nand->dev_ready = at91sam9263ek_nand_ready; - nand->chip_delay = 20; - - return 0; -} diff --git a/board/atmel/at91sam9rlek/Makefile b/board/atmel/at91sam9rlek/Makefile index 3dbee27..92a5a2b 100644 --- a/board/atmel/at91sam9rlek/Makefile +++ b/board/atmel/at91sam9rlek/Makefile @@ -32,7 +32,6 @@ LIB = $(obj)lib$(BOARD).a COBJS-y += at91sam9rlek.o COBJS-y += led.o COBJS-$(CONFIG_HAS_DATAFLASH) += partition.o -COBJS-$(CONFIG_CMD_NAND) += nand.o SRCS := $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(COBJS-y)) diff --git a/board/atmel/at91sam9rlek/at91sam9rlek.c b/board/atmel/at91sam9rlek/at91sam9rlek.c index ce10cdf..908b9c8 100644 --- a/board/atmel/at91sam9rlek/at91sam9rlek.c +++ b/board/atmel/at91sam9rlek/at91sam9rlek.c @@ -76,10 +76,10 @@ static void at91sam9rlek_nand_hw_init(void) at91_sys_write(AT91_PMC_PCER, 1 << AT91SAM9RL_ID_PIOD); /* Configure RDY/BSY */ - at91_set_gpio_input(AT91_PIN_PD17, 1); + at91_set_gpio_input(CONFIG_SYS_NAND_READY_PIN, 1); /* Enable NandFlash */ - at91_set_gpio_output(AT91_PIN_PB6, 1); + at91_set_gpio_output(CONFIG_SYS_NAND_ENABLE_PIN, 1); at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */ at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */ diff --git a/board/atmel/at91sam9rlek/nand.c b/board/atmel/at91sam9rlek/nand.c deleted file mode 100644 index 625f6ec..0000000 --- a/board/atmel/at91sam9rlek/nand.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2007-2008 - * Stelian Pop - * Lead Tech Design - * - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include -#include -#include - -#include - -/* - * hardware specific access to control-lines - */ -#define MASK_ALE (1 << 21) /* our ALE is AD21 */ -#define MASK_CLE (1 << 22) /* our CLE is AD22 */ - -static void at91sam9rlek_nand_hwcontrol(struct mtd_info *mtd, - int cmd, unsigned int ctrl) -{ - struct nand_chip *this = mtd->priv; - - if (ctrl & NAND_CTRL_CHANGE) { - ulong IO_ADDR_W = (ulong) this->IO_ADDR_W; - IO_ADDR_W &= ~(MASK_ALE | MASK_CLE); - - if (ctrl & NAND_CLE) - IO_ADDR_W |= MASK_CLE; - if (ctrl & NAND_ALE) - IO_ADDR_W |= MASK_ALE; - - at91_set_gpio_value(AT91_PIN_PB6, !(ctrl & NAND_NCE)); - this->IO_ADDR_W = (void *) IO_ADDR_W; - } - - if (cmd != NAND_CMD_NONE) - writeb(cmd, this->IO_ADDR_W); -} - -static int at91sam9rlek_nand_ready(struct mtd_info *mtd) -{ - return at91_get_gpio_value(AT91_PIN_PD17); -} - -int board_nand_init(struct nand_chip *nand) -{ - nand->ecc.mode = NAND_ECC_SOFT; -#ifdef CONFIG_SYS_NAND_DBW_16 - nand->options = NAND_BUSWIDTH_16; -#endif - nand->cmd_ctrl = at91sam9rlek_nand_hwcontrol; - nand->dev_ready = at91sam9rlek_nand_ready; - nand->chip_delay = 20; - - return 0; -} -- cgit v1.1 From 176c4a982c6531f96426afaa1126cf9a5e2d5e03 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 22 Mar 2009 14:28:13 +0100 Subject: cmc_pu2: fix misc_init_r prototype Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/cmc_pu2/load_sernum_ethaddr.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c index 5ef9f20..f02406c 100644 --- a/board/cmc_pu2/load_sernum_ethaddr.c +++ b/board/cmc_pu2/load_sernum_ethaddr.c @@ -66,7 +66,7 @@ int i2c_read (unsigned char chip, unsigned int addr, int alen, * Internal structure: see struct definition */ -void misc_init_r(void) +int misc_init_r(void) { struct manufacturer_data data; char serial [9]; @@ -80,7 +80,7 @@ void misc_init_r(void) if (i2c_read(I2C_CHIP, I2C_OFFSET, I2C_ALEN, (unsigned char *)&data, sizeof(data)) != 0) { puts ("Error reading manufacturer data from EEPROM\n"); - return; + return -1; } /* check if manufacturer data block is valid */ @@ -93,7 +93,7 @@ void misc_init_r(void) if (chksum != data.chksum) { puts ("Error: manufacturer data block has invalid checksum\n"); - return; + return -1; } /* copy serial number */ @@ -107,4 +107,6 @@ void misc_init_r(void) if (getenv("ethaddr") == NULL) { eth_setenv_enetaddr("ethaddr", data.macadr); } + + return 0; } -- cgit v1.1 From 118d168035cc93f586da4812c89cb153eb9f4243 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 22 Mar 2009 14:28:14 +0100 Subject: cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr' Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/cmc_pu2/load_sernum_ethaddr.c | 1 + 1 file changed, 1 insertion(+) (limited to 'board') diff --git a/board/cmc_pu2/load_sernum_ethaddr.c b/board/cmc_pu2/load_sernum_ethaddr.c index f02406c..6f85dd9 100644 --- a/board/cmc_pu2/load_sernum_ethaddr.c +++ b/board/cmc_pu2/load_sernum_ethaddr.c @@ -27,6 +27,7 @@ /* #define DEBUG */ #include +#include #define I2C_CHIP 0x50 /* I2C bus address of onboard EEPROM */ #define I2C_ALEN 1 /* length of EEPROM addresses in bytes */ -- cgit v1.1 From df486b1fa3f750b153eac7daa0b3bf1f594e5098 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Sun, 22 Mar 2009 14:48:16 +0100 Subject: at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board. It is essentially the same, with a few minor differences. Here is the chip page on Atmel website: http://www.atmel.com/dyn/products/product_card.asp?part_id=4337 Signed-off-by: Justin Waters Signed-off-by: Nicolas Ferre Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/atmel/at91sam9260ek/at91sam9260ek.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'board') diff --git a/board/atmel/at91sam9260ek/at91sam9260ek.c b/board/atmel/at91sam9260ek/at91sam9260ek.c index ae00c53..6bd3b44 100644 --- a/board/atmel/at91sam9260ek/at91sam9260ek.c +++ b/board/atmel/at91sam9260ek/at91sam9260ek.c @@ -141,8 +141,13 @@ int board_init(void) /* Enable Ctrlc */ console_init_f(); +#ifdef CONFIG_AT91SAM9G20EK + /* arch number of AT91SAM9260EK-Board */ + gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9G20EK; +#else /* arch number of AT91SAM9260EK-Board */ gd->bd->bi_arch_number = MACH_TYPE_AT91SAM9260EK; +#endif /* adress of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; -- cgit v1.1