From 17c5ef20073c49ae1a10150b4194b25b6f1154fe Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jan 2013 05:10:16 +0000 Subject: mx53loco: Add support for SEIKO 4.3'' WVGA panel Add support for the Seiko 4.3'' WVGA panel on mx53loco. By default, the CLAA WVGA panel is selected. In order to support the Seiko panel, the enviroment variable 'panel' must be set to 'seiko'. Signed-off-by: Fabio Estevam --- board/freescale/mx53loco/mx53loco.c | 2 -- board/freescale/mx53loco/mx53loco_video.c | 38 ++++++++++++++++++++++++++++--- 2 files changed, 35 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/freescale/mx53loco/mx53loco.c b/board/freescale/mx53loco/mx53loco.c index 60cd4f0..8f39c38 100644 --- a/board/freescale/mx53loco/mx53loco.c +++ b/board/freescale/mx53loco/mx53loco.c @@ -503,8 +503,6 @@ int board_init(void) mxc_set_sata_internal_clock(); setup_iomux_i2c(); - lcd_enable(); - return 0; } diff --git a/board/freescale/mx53loco/mx53loco_video.c b/board/freescale/mx53loco/mx53loco_video.c index 69991e8..a4d5a6a 100644 --- a/board/freescale/mx53loco/mx53loco_video.c +++ b/board/freescale/mx53loco/mx53loco_video.c @@ -46,6 +46,21 @@ static struct fb_videomode const claa_wvga = { .vmode = FB_VMODE_NONINTERLACED }; +static struct fb_videomode const seiko_wvga = { + .name = "Seiko-43WVF1G", + .refresh = 60, + .xres = 800, + .yres = 480, + .pixclock = 29851, /* picosecond (33.5 MHz) */ + .left_margin = 89, + .right_margin = 164, + .upper_margin = 23, + .lower_margin = 10, + .hsync_len = 10, + .vsync_len = 10, + .sync = 0, +}; + void setup_iomux_lcd(void) { mxc_request_iomux(MX53_PIN_DI0_DISP_CLK, IOMUX_CONFIG_ALT0); @@ -86,9 +101,26 @@ void setup_iomux_lcd(void) gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_GPIO_1), 1); } -void lcd_enable(void) +int board_video_skip(void) { - int ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); + int ret; + char const *e = getenv("panel"); + + if (e) { + if (strcmp(e, "seiko") == 0) { + ret = ipuv3_fb_init(&seiko_wvga, 0, IPU_PIX_FMT_RGB24); + if (ret) + printf("Seiko cannot be configured: %d\n", ret); + return ret; + } + } + + /* + * 'panel' env variable not found or has different value than 'seiko' + * Defaulting to claa lcd. + */ + ret = ipuv3_fb_init(&claa_wvga, 0, IPU_PIX_FMT_RGB565); if (ret) - printf("LCD cannot be configured: %d\n", ret); + printf("CLAA cannot be configured: %d\n", ret); + return ret; } -- cgit v1.1 From abbab70363dcdb270cbf24d47849214dd3a3e010 Mon Sep 17 00:00:00 2001 From: Troy Kisky Date: Mon, 22 Oct 2012 15:19:01 +0000 Subject: mx31/mx35/mx51/mx53/mx6: add watchdog Use a common watchdog driver for all these cpus. Signed-off-by: Troy Kisky Acked-by: Stefano Babic --- board/davedenx/qong/qong.c | 9 +-------- board/freescale/mx31pdk/mx31pdk.c | 9 +-------- board/hale/tt01/tt01.c | 2 +- 3 files changed, 3 insertions(+), 17 deletions(-) (limited to 'board') diff --git a/board/davedenx/qong/qong.c b/board/davedenx/qong/qong.c index a3079db..06ca17c 100644 --- a/board/davedenx/qong/qong.c +++ b/board/davedenx/qong/qong.c @@ -37,13 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - mxc_hw_watchdog_reset(); -} -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -188,7 +181,7 @@ int board_late_init(void) pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; diff --git a/board/freescale/mx31pdk/mx31pdk.c b/board/freescale/mx31pdk/mx31pdk.c index bc60632..895396c 100644 --- a/board/freescale/mx31pdk/mx31pdk.c +++ b/board/freescale/mx31pdk/mx31pdk.c @@ -36,13 +36,6 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - mxc_hw_watchdog_reset(); -} -#endif - int dram_init(void) { /* dram_init must store complete ramsize in gd->ram_size */ @@ -98,7 +91,7 @@ int board_late_init(void) pmic_reg_write(p, REG_POWER_CTL0, val | COINCHEN); pmic_reg_write(p, REG_INT_STATUS1, RTCRSTI); #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; } diff --git a/board/hale/tt01/tt01.c b/board/hale/tt01/tt01.c index 0c2cb79..b4b8209 100644 --- a/board/hale/tt01/tt01.c +++ b/board/hale/tt01/tt01.c @@ -179,7 +179,7 @@ int board_init(void) int board_late_init(void) { #ifdef CONFIG_HW_WATCHDOG - mxc_hw_watchdog_enable(); + hw_watchdog_init(); #endif return 0; -- cgit v1.1 From 11d80af4876b609832856853b63d06a1011bccf1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Wed, 9 Jan 2013 04:55:09 +0000 Subject: mx51evk: Add DVI output support Add DVI output support and make it the default video output. Currently the CLAA WVGA panel is supported, but this panel has to be purchased separately, so using the DVI output as the default would allow more people to try the splash screen feature on a mx51evk. If someone still wants to use the CLAA WVGA, just set the panel variable as: set panel claa Signed-off-by: Fabio Estevam --- board/freescale/mx51evk/mx51evk.c | 2 -- board/freescale/mx51evk/mx51evk_video.c | 39 ++++++++++++++++++++++++++++++--- 2 files changed, 36 insertions(+), 5 deletions(-) (limited to 'board') diff --git a/board/freescale/mx51evk/mx51evk.c b/board/freescale/mx51evk/mx51evk.c index d1ef431..54c16b1 100644 --- a/board/freescale/mx51evk/mx51evk.c +++ b/board/freescale/mx51evk/mx51evk.c @@ -489,8 +489,6 @@ int board_init(void) /* address of boot parameters */ gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - lcd_enable(); - return 0; } diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c index f036cf7..7be5c9b 100644 --- a/board/freescale/mx51evk/mx51evk_video.c +++ b/board/freescale/mx51evk/mx51evk_video.c @@ -48,6 +48,22 @@ static struct fb_videomode const claa_wvga = { .vmode = FB_VMODE_NONINTERLACED }; +static struct fb_videomode const dvi = { + .name = "DVI panel", + .refresh = 60, + .xres = 1024, + .yres = 768, + .pixclock = 15385, + .left_margin = 220, + .right_margin = 40, + .upper_margin = 21, + .lower_margin = 7, + .hsync_len = 60, + .vsync_len = 10, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED +}; + void setup_iomux_lcd(void) { /* DI2_PIN15 */ @@ -73,9 +89,26 @@ void setup_iomux_lcd(void) gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); } -void lcd_enable(void) +int board_video_skip(void) { - int ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); + int ret; + char const *e = getenv("panel"); + + if (e) { + if (strcmp(e, "claa") == 0) { + ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); + if (ret) + printf("claa cannot be configured: %d\n", ret); + return ret; + } + } + + /* + * 'panel' env variable not found or has different value than 'claa' + * Defaulting to dvi output. + */ + ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24); if (ret) - printf("LCD cannot be configured: %d\n", ret); + printf("dvi cannot be configured: %d\n", ret); + return ret; } -- cgit v1.1