From 8ed44d91c8122d00368523b0b746691c895d3b3c Mon Sep 17 00:00:00 2001
From: Wolfgang Denk <wd@denx.de>
Date: Sun, 19 Oct 2008 02:35:50 +0200
Subject: Cleanup: fix "MHz" spelling

Signed-off-by: Wolfgang Denk <wd@denx.de>
---
 board/Marvell/db64360/pci.c             |  6 +++---
 board/Marvell/db64460/pci.c             |  6 +++---
 board/amcc/katmai/cmd_katmai.c          | 18 +++++++++---------
 board/amcc/yucca/cmd_yucca.c            | 22 +++++++++++-----------
 board/bf537-stamp/post-memory.c         | 24 ++++++++++++------------
 board/cray/L1/L1.c                      |  8 ++++----
 board/eltec/bab7xx/misc.c               |  2 +-
 board/esd/cpci750/pci.c                 |  6 +++---
 board/esd/pci405/pci405.c               |  2 +-
 board/fads/fads.c                       | 10 +++++-----
 board/freescale/mpc8540ads/mpc8540ads.c |  4 ++--
 board/freescale/mpc8541cds/mpc8541cds.c |  4 ++--
 board/freescale/mpc8555cds/mpc8555cds.c |  4 ++--
 board/freescale/mpc8560ads/mpc8560ads.c |  4 ++--
 board/gen860t/beeper.c                  |  2 +-
 board/idmr/idmr.c                       |  2 +-
 board/motionpro/motionpro.c             |  2 +-
 board/mpc8540eval/mpc8540eval.c         |  2 +-
 board/mpl/pip405/pip405.c               |  2 +-
 board/pm854/pm854.c                     |  4 ++--
 board/pm856/pm856.c                     |  4 ++--
 board/prodrive/p3mx/pci.c               |  6 +++---
 board/sbc8560/sbc8560.c                 |  2 +-
 board/siemens/IAD210/IAD210.c           |  2 +-
 board/siemens/IAD210/atm.c              |  2 +-
 board/tqc/tqm85xx/tqm85xx.c             |  4 ++--
 26 files changed, 77 insertions(+), 77 deletions(-)

(limited to 'board')

diff --git a/board/Marvell/db64360/pci.c b/board/Marvell/db64360/pci.c
index a7e3c95..4998095 100644
--- a/board/Marvell/db64360/pci.c
+++ b/board/Marvell/db64360/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
diff --git a/board/Marvell/db64460/pci.c b/board/Marvell/db64460/pci.c
index a7e3c95..4998095 100644
--- a/board/Marvell/db64460/pci.c
+++ b/board/Marvell/db64460/pci.c
@@ -52,13 +52,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
diff --git a/board/amcc/katmai/cmd_katmai.c b/board/amcc/katmai/cmd_katmai.c
index 703d225..ba71bd5 100644
--- a/board/amcc/katmai/cmd_katmai.c
+++ b/board/amcc/katmai/cmd_katmai.c
@@ -57,9 +57,9 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	do {
 #ifdef	CONFIG_STRESS
-		printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+		printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
 #else
-		printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+		printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
 #endif
 		nbytes = readline (" ? ");
 
@@ -87,11 +87,11 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	else {
 		do {
 			if (strcmp(cpuClock, "400") == 0)
-				printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
 
 #ifdef	CONFIG_STRESS
 			if (strcmp(cpuClock, "667") == 0)
-				printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
 
 #endif
 			nbytes = readline (" ? ");
@@ -117,7 +117,7 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 	}
 
 	do {
-		printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+		printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -133,10 +133,10 @@ static int do_bootstrap(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 
 	} while (nbytes == 0);
 
-	printf("\nsys clk   = %sMhz\n", sysClock);
-	printf("cpu clk   = %sMhz\n", cpuClock);
-	printf("plb clk   = %sMhz\n", plbClock);
-	printf("Pci-X clk = %sMhz\n", pcixClock);
+	printf("\nsys clk   = %s MHz\n", sysClock);
+	printf("cpu clk   = %s MHz\n", cpuClock);
+	printf("plb clk   = %s MHz\n", plbClock);
+	printf("Pci-X clk = %s MHz\n", pcixClock);
 
 	do {
 		printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/amcc/yucca/cmd_yucca.c b/board/amcc/yucca/cmd_yucca.c
index bd42c5d..d969860 100644
--- a/board/amcc/yucca/cmd_yucca.c
+++ b/board/amcc/yucca/cmd_yucca.c
@@ -69,7 +69,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 		chip = IIC0_ALT_BOOTPROM_ADDR;
 
 	do {
-		printf("enter sys clock frequency 33 or 66 Mhz or quit to abort\n");
+		printf("enter sys clock frequency 33 or 66 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -85,12 +85,12 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 
 	do {
 		if (strcmp(sysClock, "66") == 0) {
-			printf("enter cpu clock frequency 400, 533 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 533 MHz or quit to abort\n");
 		} else {
 #ifdef	CONFIG_STRESS
-			printf("enter cpu clock frequency 400, 500, 533, 667 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 500, 533, 667 MHz or quit to abort\n");
 #else
-			printf("enter cpu clock frequency 400, 500, 533 Mhz or quit to abort\n");
+			printf("enter cpu clock frequency 400, 500, 533 MHz or quit to abort\n");
 #endif
 		}
 		nbytes = readline (" ? ");
@@ -130,11 +130,11 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 	} else {
 		do {
 			if (strcmp(cpuClock, "400") == 0)
-				printf("enter plb clock frequency 100, 133 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 100, 133 MHz or quit to abort\n");
 
 #ifdef	CONFIG_STRESS
 			if (strcmp(cpuClock, "667") == 0)
-				printf("enter plb clock frequency 133, 166 Mhz or quit to abort\n");
+				printf("enter plb clock frequency 133, 166 MHz or quit to abort\n");
 
 #endif
 			nbytes = readline (" ? ");
@@ -160,7 +160,7 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 	}
 
 	do {
-		printf("enter Pci-X clock frequency 33, 66, 100 or 133 Mhz or quit to abort\n");
+		printf("enter Pci-X clock frequency 33, 66, 100 or 133 MHz or quit to abort\n");
 		nbytes = readline (" ? ");
 
 		if (strcmp(console_buffer, "quit") == 0)
@@ -176,10 +176,10 @@ static int setBootStrapClock(cmd_tbl_t *cmdtp, int incrflag, int flag,
 
 	} while (nbytes == 0);
 
-	printf("\nsys clk   = %sMhz\n", sysClock);
-	printf("cpu clk   = %sMhz\n", cpuClock);
-	printf("plb clk   = %sMhz\n", plbClock);
-	printf("Pci-X clk = %sMhz\n", pcixClock);
+	printf("\nsys clk   = %s MHz\n", sysClock);
+	printf("cpu clk   = %s MHz\n", cpuClock);
+	printf("plb clk   = %s MHz\n", plbClock);
+	printf("Pci-X clk = %s MHz\n", pcixClock);
 
 	do {
 		printf("\npress [y] to write I2C bootstrap \n");
diff --git a/board/bf537-stamp/post-memory.c b/board/bf537-stamp/post-memory.c
index 7c36c81..889aa5c 100644
--- a/board/bf537-stamp/post-memory.c
+++ b/board/bf537-stamp/post-memory.c
@@ -27,18 +27,18 @@ const int pll[CCLK_NUM][SCLK_NUM][2] = {
 	{{4, 1}, {4, 2}, {4, 4}}	/* CCLK = 100M */
 };
 const char *const log[CCLK_NUM][SCLK_NUM] = {
-	{"CCLK-500Mhz SCLK-125Mhz:    Writing...\0",
-	 "CCLK-500Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-500Mhz SCLK- 50Mhz:    Writing...\0",},
-	{"CCLK-400Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-400Mhz SCLK- 80Mhz:    Writing...\0",
-	 "CCLK-400Mhz SCLK- 50Mhz:    Writing...\0",},
-	{"CCLK-200Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-200Mhz SCLK- 50Mhz:    Writing...\0",
-	 "CCLK-200Mhz SCLK- 40Mhz:    Writing...\0",},
-	{"CCLK-100Mhz SCLK-100Mhz:    Writing...\0",
-	 "CCLK-100Mhz SCLK- 50Mhz:    Writing...\0",
-	 "CCLK-100Mhz SCLK- 25Mhz:    Writing...\0",},
+	{"CCLK-500MHz SCLK-125MHz:    Writing...\0",
+	 "CCLK-500MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-500MHz SCLK- 50MHz:    Writing...\0",},
+	{"CCLK-400MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-400MHz SCLK- 80MHz:    Writing...\0",
+	 "CCLK-400MHz SCLK- 50MHz:    Writing...\0",},
+	{"CCLK-200MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-200MHz SCLK- 50MHz:    Writing...\0",
+	 "CCLK-200MHz SCLK- 40MHz:    Writing...\0",},
+	{"CCLK-100MHz SCLK-100MHz:    Writing...\0",
+	 "CCLK-100MHz SCLK- 50MHz:    Writing...\0",
+	 "CCLK-100MHz SCLK- 25MHz:    Writing...\0",},
 };
 
 int memory_post_test(int flags)
diff --git a/board/cray/L1/L1.c b/board/cray/L1/L1.c
index 2babd2d..1c82bdf 100644
--- a/board/cray/L1/L1.c
+++ b/board/cray/L1/L1.c
@@ -205,13 +205,13 @@ static void init_sdram (void)
 /* To set the appropriate timings, we need to know the SDRAM speed.	*/
 /* We can use the PLB speed since the SDRAM speed is the same as	*/
 /* the PLB speed. The PLB speed is the FBK divider times the		*/
-/* 405GP reference clock, which on the L1 is 25Mhz.			*/
-/* Thus, if FBK div is 2, SDRAM is 50Mhz; if FBK div is 3, SDRAM is	*/
-/* 150Mhz; if FBK is 3, SDRAM is 150Mhz.				*/
+/* 405GP reference clock, which on the L1 is 25MHz.			*/
+/* Thus, if FBK div is 2, SDRAM is 50MHz; if FBK div is 3, SDRAM is	*/
+/* 150MHz; if FBK is 3, SDRAM is 150MHz.				*/
 
 	/* divisor = ((mfdcr(strap)>> 28) & 0x3); */
 
-/* write SDRAM timing for 100Mhz. */
+/* write SDRAM timing for 100MHz. */
 	mtdcr (memcfga, mem_sdtr1);
 	mtdcr (memcfgd, 0x0086400D);
 
diff --git a/board/eltec/bab7xx/misc.c b/board/eltec/bab7xx/misc.c
index 1c94a76..bc6eb40 100644
--- a/board/eltec/bab7xx/misc.c
+++ b/board/eltec/bab7xx/misc.c
@@ -377,7 +377,7 @@ int misc_init_r (void)
     {
 	if (pci_find_device(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C860, 0) > 0)
 	{
-	    /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 Mhz */
+	    /* BAB740 with SCSI=IRQ 11; SCC=IRQ 9; no IDE; NCR860 at 80 MHz */
 	    scsi_dev_id = PCI_DEVICE_ID_NCR_53C860;
 	    scsi_max_scsi_id = 7;
 	    scsi_sym53c8xx_ccf = 0x15;
diff --git a/board/esd/cpci750/pci.c b/board/esd/cpci750/pci.c
index cbe766f..bfc7e55 100644
--- a/board/esd/cpci750/pci.c
+++ b/board/esd/cpci750/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
diff --git a/board/esd/pci405/pci405.c b/board/esd/pci405/pci405.c
index 4db7052..9112788 100644
--- a/board/esd/pci405/pci405.c
+++ b/board/esd/pci405/pci405.c
@@ -347,7 +347,7 @@ int checkboard (void)
 		if (value) {
 			puts(", 33 MHz PCI");
 		} else {
-			puts(", 66 Mhz PCI");
+			puts(", 66 MHz PCI");
 		}
 	}
 
diff --git a/board/fads/fads.c b/board/fads/fads.c
index 278fa2a..9f7faaf 100644
--- a/board/fads/fads.c
+++ b/board/fads/fads.c
@@ -449,19 +449,19 @@ static int _initsdram(uint base, uint noMbytes)
 	/* Now run the precharge/nop/mrs commands.
 	*/
 
-	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50Mhz) */
-	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100Mhz) */
+	memctl->memc_mcr = 0x80808111;   /* run umpb cs4 1 count 1, addr 0x11 ??? (50MHz) */
+	                                 /* run umpb cs4 1 count 1, addr 0x11 precharge+MRS (100MHz) */
 	udelay(200);
 
 	/* Run 8 refresh cycles */
 
-	memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 Mhz)*/
+	memctl->memc_mcr = SDRAM_MCRVALUE0; /* run upmb cs4 loop 1 addr 0x5 precharge+MRS (50 MHz)*/
 					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS (100MHz) */
 
 	udelay(200);
 
-	memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 Mhz) or TLF 8 (50MHz) */
-	memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 Mhz) */
+	memctl->memc_mbmr = SDRAM_MBMRVALUE1; /* TLF 4 (100 MHz) or TLF 8 (50MHz) */
+	memctl->memc_mcr = SDRAM_MCRVALUE1; /* run upmb cs4 loop 1 addr 0x30 refr (50 MHz) */
 					    /* run upmb cs4 loop 1 addr 0x11 precharge+MRS ??? (100MHz) */
 
 	udelay(200);
diff --git a/board/freescale/mpc8540ads/mpc8540ads.c b/board/freescale/mpc8540ads/mpc8540ads.c
index 7dccd37..a0b6fbd 100644
--- a/board/freescale/mpc8540ads/mpc8540ads.c
+++ b/board/freescale/mpc8540ads/mpc8540ads.c
@@ -127,8 +127,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/freescale/mpc8541cds/mpc8541cds.c b/board/freescale/mpc8541cds/mpc8541cds.c
index 7c35c35..7e40c5c 100644
--- a/board/freescale/mpc8541cds/mpc8541cds.c
+++ b/board/freescale/mpc8541cds/mpc8541cds.c
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/freescale/mpc8555cds/mpc8555cds.c b/board/freescale/mpc8555cds/mpc8555cds.c
index 4cd25b6..33685c1 100644
--- a/board/freescale/mpc8555cds/mpc8555cds.c
+++ b/board/freescale/mpc8555cds/mpc8555cds.c
@@ -302,8 +302,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/freescale/mpc8560ads/mpc8560ads.c b/board/freescale/mpc8560ads/mpc8560ads.c
index 4fe1d85..3730818 100644
--- a/board/freescale/mpc8560ads/mpc8560ads.c
+++ b/board/freescale/mpc8560ads/mpc8560ads.c
@@ -331,8 +331,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/gen860t/beeper.c b/board/gen860t/beeper.c
index b472b91..c6be83f 100644
--- a/board/gen860t/beeper.c
+++ b/board/gen860t/beeper.c
@@ -36,7 +36,7 @@
 
 /*
  * Initialize beeper-related hardware. Initialize timer 1 for use with
- * the beeper. Use 66 Mhz internal clock with prescale of 33 to get
+ * the beeper. Use 66 MHz internal clock with prescale of 33 to get
  * 1 uS period per count.
  * FIXME: we should really compute the prescale based on the reported
  * core clock frequency.
diff --git a/board/idmr/idmr.c b/board/idmr/idmr.c
index 3771c19..6829913 100644
--- a/board/idmr/idmr.c
+++ b/board/idmr/idmr.c
@@ -78,7 +78,7 @@ phys_size_t initdram (int board_type) {
 			MCF_GPIO_SDRAM_SDCS_01);
 
 	/*
-	 * Wait 100us.  We run the bus at 50Mhz, one cycle is 20ns. So 5
+	 * Wait 100us.  We run the bus at 50MHz, one cycle is 20ns. So 5
 	 * iterations will do, but we do 10 just to be safe.
 	 */
 	for (i = 0; i < 10; ++i)
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
index 842bce6..b369219 100644
--- a/board/motionpro/motionpro.c
+++ b/board/motionpro/motionpro.c
@@ -5,7 +5,7 @@
  * modified for Promess PRO - by Andy Joseph, andy@promessdev.com
  * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
  * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
- * Also changed the refresh for 100Mhz operation
+ * Also changed the refresh for 100MHz operation
  *
  * See file CREDITS for list of people who contributed to this
  * project.
diff --git a/board/mpc8540eval/mpc8540eval.c b/board/mpc8540eval/mpc8540eval.c
index 9b564b8..fa0a336 100644
--- a/board/mpc8540eval/mpc8540eval.c
+++ b/board/mpc8540eval/mpc8540eval.c
@@ -100,7 +100,7 @@ phys_size_t initdram (int board_type)
 
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus is not emulating flash */
 	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
 	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
 		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
diff --git a/board/mpl/pip405/pip405.c b/board/mpl/pip405/pip405.c
index 3be0104..8724e27 100644
--- a/board/mpl/pip405/pip405.c
+++ b/board/mpl/pip405/pip405.c
@@ -252,7 +252,7 @@ int board_early_init_f (void)
 		(datain[2] != 0x04) ||	/* if not SDRAM */
 		(!((datain[6] == 0x40) || (datain[6] == 0x48))) ||	/* or not (64 Bit or 72 Bit)  */
 		(datain[7] != 0x00) || (datain[8] != 0x01) ||	/* or not LVTTL signal levels */
-		(datain[126] == 0x66))	/* or a 66Mhz modules */
+		(datain[126] == 0x66))	/* or a 66MHz modules */
 		SDRAM_err ("unsupported SDRAM");
 #ifdef SDRAM_DEBUG
 	serial_puts ("SDRAM sanity ok\n");
diff --git a/board/pm854/pm854.c b/board/pm854/pm854.c
index db855df..fed0ed4 100644
--- a/board/pm854/pm854.c
+++ b/board/pm854/pm854.c
@@ -144,8 +144,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/pm856/pm856.c b/board/pm856/pm856.c
index 50c4281..932f112 100644
--- a/board/pm856/pm856.c
+++ b/board/pm856/pm856.c
@@ -300,8 +300,8 @@ local_bus_init(void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
diff --git a/board/prodrive/p3mx/pci.c b/board/prodrive/p3mx/pci.c
index 85f7caa..e36b676 100644
--- a/board/prodrive/p3mx/pci.c
+++ b/board/prodrive/p3mx/pci.c
@@ -66,13 +66,13 @@ static void gt_pci_bus_mode_display (PCI_HOST host)
 		printf ("PCI %d bus mode: Conventional PCI\n", host);
 		break;
 	case 1:
-		printf ("PCI %d bus mode: 66 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
 		break;
 	case 2:
-		printf ("PCI %d bus mode: 100 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
 		break;
 	case 3:
-		printf ("PCI %d bus mode: 133 Mhz PCIX\n", host);
+		printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
 		break;
 	default:
 		printf ("Unknown BUS %d\n", mode);
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
index f01f87e..3d4008b 100644
--- a/board/sbc8560/sbc8560.c
+++ b/board/sbc8560/sbc8560.c
@@ -297,7 +297,7 @@ phys_size_t initdram (int board_type)
 #if 0
 #if !defined(CONFIG_RAM_AS_FLASH) /* LocalBus SDRAM is not emulating flash */
 	get_sys_info(&sysinfo);
-	/* if localbus freq is less than 66Mhz,we use bypass mode,otherwise use DLL */
+	/* if localbus freq is less than 66MHz,we use bypass mode,otherwise use DLL */
 	if(sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f) < 66000000) {
 		lbc->lcrr = (CONFIG_SYS_LBC_LCRR & 0x0fffffff)| 0x80000000;
 	} else {
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
index e9e7f84..e21bb24 100644
--- a/board/siemens/IAD210/IAD210.c
+++ b/board/siemens/IAD210/IAD210.c
@@ -240,7 +240,7 @@ int board_early_init_f (void)
 	iop->iop_padir = 0x0800;
 
 	/* start timer 2 for the 4hz LED blink rate */
-	timers->cpmt_tmr2 = 0xff2c;	/* 4hz for 64mhz */
+	timers->cpmt_tmr2 = 0xff2c;	/* 4HZ for 64MHz */
 	timers->cpmt_trr2 = 0x000003d0;	/* clk/16 , prescale=256 */
 	timers->cpmt_tgcr = 0x00000810;	/* run timer 2 */
 
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
index d1b75bc..e599c10 100644
--- a/board/siemens/IAD210/atm.c
+++ b/board/siemens/IAD210/atm.c
@@ -579,7 +579,7 @@ void atmUtpInit()
   /*                    11 = divide by 7                             */
   /*                                                                 */
   /* Note that the UTOPIA clock must be programmed as to operate     */
-  /* within the range SYSCLK/10 .. 50Mhz.                            */
+  /* within the range SYSCLK/10 .. 50MHz.                            */
   /*-----------------------------------------------------------------*/
   car->car_sccr &= 0xFFFFFFE0;
   car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
diff --git a/board/tqc/tqm85xx/tqm85xx.c b/board/tqc/tqm85xx/tqm85xx.c
index f69de95..1f309bb 100644
--- a/board/tqc/tqm85xx/tqm85xx.c
+++ b/board/tqc/tqm85xx/tqm85xx.c
@@ -458,8 +458,8 @@ void local_bus_init (void)
 	 * Errata LBC11.
 	 * Fix Local Bus clock glitch when DLL is enabled.
 	 *
-	 * If localbus freq is < 66Mhz, DLL bypass mode must be used.
-	 * If localbus freq is > 133Mhz, DLL can be safely enabled.
+	 * If localbus freq is < 66MHz, DLL bypass mode must be used.
+	 * If localbus freq is > 133MHz, DLL can be safely enabled.
 	 * Between 66 and 133, the DLL is enabled with an override workaround.
 	 */
 
-- 
cgit v1.1