From bcfc8976e5c86afd7f14c8a32fcd33baad0b482f Mon Sep 17 00:00:00 2001 From: Richard Genoud Date: Thu, 29 Nov 2012 23:18:32 +0000 Subject: at91sam9x5: enable USB support for 9x5ek board. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Richard Genoud Acked-by: Bo Shen Signed-off-by: Andreas Bießmann --- board/atmel/at91sam9x5ek/at91sam9x5ek.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'board') diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c index edb0886..8773e6f 100644 --- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c +++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c @@ -295,6 +295,9 @@ int board_init(void) at91_macb_hw_init(); #endif +#if defined(CONFIG_USB_OHCI_NEW) || defined(CONFIG_USB_EHCI) + at91_uhp_hw_init(); +#endif #ifdef CONFIG_LCD at91sam9x5ek_lcd_hw_init(); #endif -- cgit v1.1 From 2472216caccc82f8b4bbe62421aa649eb186fefc Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Fri, 2 Nov 2012 00:15:07 +0000 Subject: arm/km: fix memory settings On kmcoge5un we faced some serious problems with the memory during temperature tests. Reason was that we overwrite some registers for memory settings which have to leave untouched. These where registers 0x20148 , 0x2014c and 0x20154. So writing these registers is prohibited and this patch removes them from all km related config files. Even if the problem was only seen on kmcoge5un. Signed-off-by: Holger Brunck Signed-off-by: Valentin Longchamp cc: Prafulla Wadaskar --- board/keymile/km_arm/kwbimage-memphis.cfg | 6 +++--- board/keymile/km_arm/kwbimage.cfg | 6 +++--- board/keymile/km_arm/kwbimage_128M16_1.cfg | 25 ++----------------------- board/keymile/km_arm/kwbimage_256M8_1.cfg | 25 ++----------------------- 4 files changed, 10 insertions(+), 52 deletions(-) (limited to 'board') diff --git a/board/keymile/km_arm/kwbimage-memphis.cfg b/board/keymile/km_arm/kwbimage-memphis.cfg index 6df2ad7..5aa0de2 100644 --- a/board/keymile/km_arm/kwbimage-memphis.cfg +++ b/board/keymile/km_arm/kwbimage-memphis.cfg @@ -55,9 +55,9 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register + +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage #Dram initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage.cfg b/board/keymile/km_arm/kwbimage.cfg index b2f5193..e5e9942 100644 --- a/board/keymile/km_arm/kwbimage.cfg +++ b/board/keymile/km_arm/kwbimage.cfg @@ -52,9 +52,9 @@ DATA 0xFFD10008 0x00001100 # MPP Control 2 Register DATA 0xFFD100E0 0x1B1B1B1B # IO Configuration 0 Register DATA 0xFFD20134 0x66666666 # L2 RAM Timing 0 Register DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register + +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage #Dram initalization DATA 0xFFD01400 0x43000400 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage_128M16_1.cfg b/board/keymile/km_arm/kwbimage_128M16_1.cfg index bcce907..5de8df7 100644 --- a/board/keymile/km_arm/kwbimage_128M16_1.cfg +++ b/board/keymile/km_arm/kwbimage_128M16_1.cfg @@ -98,29 +98,8 @@ DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register # bit 19-18: 1, ECC RAM WTC RAM0 # bit 31-20: ???,Reserve -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -# bit 23-0: 0x000200, Addr Config tuning -# bit 31-24: 0, Reserved - -# ??? Missing register # CPU RAM Management Control2 Register - -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -# bit 15-0: 0x1C00, Opmux Tuning -# bit 31-16: 0, Pc Dp Tuning - -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register -# bit 1-0: 1, addr clk tune -# bit 3-2: 0, reserved -# bit 5-4: 0, dtcmp clk tune -# bit 7-6: 0, reserved -# bit 9-8: 0, macdrv clk tune -# bit 11-10: 0, opmuxgm2 clk tune -# bit 15-14: 0, rf clk tune -# bit 17-16: 0, rfbypass clk tune -# bit 19-18: 0, pc dp clk tune -# bit 23-20: 0, icache clk tune -# bit 27:24: 0, dcache clk tune -# bit 31:28: 0, regfile tunin +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage # SDRAM initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register diff --git a/board/keymile/km_arm/kwbimage_256M8_1.cfg b/board/keymile/km_arm/kwbimage_256M8_1.cfg index 3e1237b..d0a09f6 100644 --- a/board/keymile/km_arm/kwbimage_256M8_1.cfg +++ b/board/keymile/km_arm/kwbimage_256M8_1.cfg @@ -100,29 +100,8 @@ DATA 0xFFD20138 0x66666666 # L2 RAM Timing 1 Register # bit 19-18: 1, ECC RAM WTC RAM0 # bit 31-20: ?,Reserved -DATA 0xFFD20154 0x00000200 # CPU RAM Management Control3 Register -# bit 23-0: 0x000200, Addr Config tuning -# bit 31-24: 0, Reserved - -# ??? Missing register # CPU RAM Management Control2 Register - -DATA 0xFFD2014C 0x00001C00 # CPU RAM Management Control1 Register -# bit 15-0: 0x1C00, Opmux Tuning -# bit 31-16: 0, Pc Dp Tuning - -DATA 0xFFD20148 0x00000001 # CPU RAM Management Control0 Register -# bit 1-0: 1, addr clk tune -# bit 3-2: 0, reserved -# bit 5-4: 0, dtcmp clk tune -# bit 7-6: 0, reserved -# bit 9-8: 0, macdrv clk tune -# bit 11-10: 0, opmuxgm2 clk tune -# bit 15-14: 0, rf clk tune -# bit 17-16: 0, rfbypass clk tune -# bit 19-18: 0, pc dp clk tune -# bit 23-20: 0, icache clk tune -# bit 27:24: 0, dcache clk tune -# bit 31:28: 0, regfile tunin +# NOTE: Don't write on 0x20148 , 0x2014c and 0x20154, leave them untouched! +# If not it could cause KW Exceptions during boot in Fast Corners/High Voltage # SDRAM initalization DATA 0xFFD01400 0x430004E0 # SDRAM Configuration Register -- cgit v1.1 From 37bead1a709fd14a97ea7c5fd3efc93be0fc64f5 Mon Sep 17 00:00:00 2001 From: Holger Brunck Date: Fri, 2 Nov 2012 00:15:09 +0000 Subject: km/common: cosmetic change reported from checkpatch Signed-off-by: Holger Brunck cc: Valentin Longchamp cc: Prafulla Wadaskar Acked-by: Prafulla Wadaskar --- board/keymile/common/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'board') diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index a90f112..6f407b7 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -121,7 +121,7 @@ int i2c_make_abort(void) { #if defined(CONFIG_HARD_I2C) && !defined(MACH_TYPE_KM_KIRKWOOD) - immap_t *immap = (immap_t *)CONFIG_SYS_IMMR ; + immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; i2c8260_t *i2c = (i2c8260_t *)&immap->im_i2c; /* -- cgit v1.1 From 136846d77f9788431d0405a7291e93f9996bb016 Mon Sep 17 00:00:00 2001 From: Valentin Longchamp Date: Fri, 2 Nov 2012 00:15:10 +0000 Subject: arm/km: remove duplicate code This patch removes 2 small portions of board specific code that are duplicated with common ARM code and thus unnecessary. These 2 portions of code concern the mach id that is given by u-boot to the Linux kernel to identify the system's MACH. The first one was the possibility to change the MACH thanks to the 'mach_id' enviroment variable. This is possible thanks to the 'machid' env variable (see arch/arm/lib/bootm.c:boot_jump_linux()). The seconde one is the setting of the bi_arch_number. This is already done in arch/arm/lib/board.c:board_init_f() since km_arm.h does #define CONFIG_MACH_TYPE. Signed-off-by: Valentin Longchamp cc: Holger Brunck cc: Prafulla Wadaskar Acked-by: Prafulla Wadaskar --- board/keymile/km_arm/km_arm.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'board') diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 0c4dddc..262b8d2 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -193,15 +193,6 @@ void set_bootcount_addr(void) int misc_init_r(void) { - char *str; - int mach_type; - - str = getenv("mach_type"); - if (str != NULL) { - mach_type = simple_strtoul(str, NULL, 10); - printf("Overwriting MACH_TYPE with %d!!!\n", mach_type); - gd->bd->bi_arch_number = mach_type; - } #if defined(CONFIG_KM_MGCOGE3UN) char *wait_for_ne; wait_for_ne = getenv("waitforne"); @@ -258,11 +249,6 @@ int board_early_init_f(void) int board_init(void) { - /* - * arch number of board - */ - gd->bd->bi_arch_number = MACH_TYPE_KM_KIRKWOOD; - /* address of boot parameters */ gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; -- cgit v1.1 From 9d86f0c30bd7e6a7f7a93bc7f12b69ef48a4de19 Mon Sep 17 00:00:00 2001 From: Albert ARIBAUD Date: Mon, 26 Nov 2012 11:27:36 +0000 Subject: kirkwood: make MPP arrays static const This saves stack and code memory for local copy, and consumes initialized data memory. For 22 of the 29 kirkwood-based boards, this results in a global saving of about 30 bytes. For 7 of them, it results in an increase of 6 to 14 bytes. Signed-off-by: Albert ARIBAUD --- board/LaCie/net2big_v2/net2big_v2.c | 2 +- board/LaCie/netspace_v2/netspace_v2.c | 2 +- board/Marvell/dreamplug/dreamplug.c | 2 +- board/Marvell/guruplug/guruplug.c | 2 +- board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c | 2 +- board/Marvell/openrd/openrd.c | 2 +- board/Marvell/rd6281a/rd6281a.c | 2 +- board/Marvell/sheevaplug/sheevaplug.c | 2 +- board/Seagate/dockstar/dockstar.c | 2 +- board/buffalo/lsxl/lsxl.c | 2 +- board/cloudengines/pogo_e02/pogo_e02.c | 2 +- board/d-link/dns325/dns325.c | 2 +- board/iomega/iconnect/iconnect.c | 2 +- board/karo/tk71/tk71.c | 2 +- board/keymile/km_arm/km_arm.c | 2 +- board/raidsonic/ib62x0/ib62x0.c | 2 +- 16 files changed, 16 insertions(+), 16 deletions(-) (limited to 'board') diff --git a/board/LaCie/net2big_v2/net2big_v2.c b/board/LaCie/net2big_v2/net2big_v2.c index 0e06c29..e524f35 100644 --- a/board/LaCie/net2big_v2/net2big_v2.c +++ b/board/LaCie/net2big_v2/net2big_v2.c @@ -39,7 +39,7 @@ int board_early_init_f(void) NET2BIG_V2_OE_LOW, NET2BIG_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/LaCie/netspace_v2/netspace_v2.c b/board/LaCie/netspace_v2/netspace_v2.c index 101a80a..0aa5345 100644 --- a/board/LaCie/netspace_v2/netspace_v2.c +++ b/board/LaCie/netspace_v2/netspace_v2.c @@ -39,7 +39,7 @@ int board_early_init_f(void) NETSPACE_V2_OE_LOW, NETSPACE_V2_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/Marvell/dreamplug/dreamplug.c b/board/Marvell/dreamplug/dreamplug.c index d6497aa..0caf34f 100644 --- a/board/Marvell/dreamplug/dreamplug.c +++ b/board/Marvell/dreamplug/dreamplug.c @@ -46,7 +46,7 @@ int board_early_init_f(void) DREAMPLUG_OE_LOW, DREAMPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, /* SPI Flash */ MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/Marvell/guruplug/guruplug.c b/board/Marvell/guruplug/guruplug.c index f5c1c3c..3a52ab2 100644 --- a/board/Marvell/guruplug/guruplug.c +++ b/board/Marvell/guruplug/guruplug.c @@ -43,7 +43,7 @@ int board_early_init_f(void) GURUPLUG_OE_LOW, GURUPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c index 43852f6..fb57faa 100644 --- a/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c +++ b/board/Marvell/mv88f6281gtw_ge/mv88f6281gtw_ge.c @@ -45,7 +45,7 @@ int board_early_init_f(void) MV88F6281GTW_GE_OE_LOW, MV88F6281GTW_GE_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/Marvell/openrd/openrd.c b/board/Marvell/openrd/openrd.c index d48f05a..c59a326 100644 --- a/board/Marvell/openrd/openrd.c +++ b/board/Marvell/openrd/openrd.c @@ -48,7 +48,7 @@ int board_early_init_f(void) OPENRD_OE_LOW, OPENRD_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/rd6281a/rd6281a.c b/board/Marvell/rd6281a/rd6281a.c index 1fd7677..adaa6a1 100644 --- a/board/Marvell/rd6281a/rd6281a.c +++ b/board/Marvell/rd6281a/rd6281a.c @@ -44,7 +44,7 @@ int board_early_init_f(void) RD6281A_OE_LOW, RD6281A_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Marvell/sheevaplug/sheevaplug.c b/board/Marvell/sheevaplug/sheevaplug.c index 688d308..16efe64 100644 --- a/board/Marvell/sheevaplug/sheevaplug.c +++ b/board/Marvell/sheevaplug/sheevaplug.c @@ -43,7 +43,7 @@ int board_early_init_f(void) SHEEVAPLUG_OE_LOW, SHEEVAPLUG_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/Seagate/dockstar/dockstar.c b/board/Seagate/dockstar/dockstar.c index fc88520..4f1f899 100644 --- a/board/Seagate/dockstar/dockstar.c +++ b/board/Seagate/dockstar/dockstar.c @@ -47,7 +47,7 @@ int board_early_init_f(void) DOCKSTAR_OE_LOW, DOCKSTAR_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index 57776fb..f298020 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -76,7 +76,7 @@ int board_early_init_f(void) * Multi-Purpose Pins Functionality configuration * These strappings are taken from the original vendor uboot port. */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_SPI_SCn, MPP1_SPI_MOSI, MPP2_SPI_SCK, diff --git a/board/cloudengines/pogo_e02/pogo_e02.c b/board/cloudengines/pogo_e02/pogo_e02.c index bac9ce5..3b1c8ec 100644 --- a/board/cloudengines/pogo_e02/pogo_e02.c +++ b/board/cloudengines/pogo_e02/pogo_e02.c @@ -45,7 +45,7 @@ int board_early_init_f(void) POGO_E02_OE_LOW, POGO_E02_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/d-link/dns325/dns325.c b/board/d-link/dns325/dns325.c index 11260fe..4187901 100644 --- a/board/d-link/dns325/dns325.c +++ b/board/d-link/dns325/dns325.c @@ -44,7 +44,7 @@ int board_early_init_f(void) DNS325_OE_LOW, DNS325_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/iomega/iconnect/iconnect.c b/board/iomega/iconnect/iconnect.c index 8cfb4e6..c54c95d 100644 --- a/board/iomega/iconnect/iconnect.c +++ b/board/iomega/iconnect/iconnect.c @@ -41,7 +41,7 @@ int board_early_init_f(void) ICONNECT_OE_LOW, ICONNECT_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/karo/tk71/tk71.c b/board/karo/tk71/tk71.c index 96410d7..7a4e7b3 100644 --- a/board/karo/tk71/tk71.c +++ b/board/karo/tk71/tk71.c @@ -47,7 +47,7 @@ int board_early_init_f(void) TK71_OE_LOW, TK71_OE_HIGH); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c index 262b8d2..eda9199 100644 --- a/board/keymile/km_arm/km_arm.c +++ b/board/keymile/km_arm/km_arm.c @@ -54,7 +54,7 @@ DECLARE_GLOBAL_DATA_PTR; #define MASK_RBI_DEFECT_16 0x01 /* Multi-Purpose Pins Functionality configuration */ -u32 kwmpp_config[] = { +static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, diff --git a/board/raidsonic/ib62x0/ib62x0.c b/board/raidsonic/ib62x0/ib62x0.c index 5f0f396..cf4ca51 100644 --- a/board/raidsonic/ib62x0/ib62x0.c +++ b/board/raidsonic/ib62x0/ib62x0.c @@ -45,7 +45,7 @@ int board_early_init_f(void) /* Set SATA activity LEDs to default off */ writel(MVSATAHC_LED_POLARITY_CTRL, MVSATAHC_LED_CONF_REG); /* Multi-Purpose Pins Functionality configuration */ - u32 kwmpp_config[] = { + static const u32 kwmpp_config[] = { MPP0_NF_IO2, MPP1_NF_IO3, MPP2_NF_IO4, -- cgit v1.1 From 7202e8ae5132deae7a9e6f310c3278f2da388471 Mon Sep 17 00:00:00 2001 From: Albert ARIBAUD Date: Mon, 26 Nov 2012 11:27:37 +0000 Subject: ARM: lacie_kw: add support for WIRELESS_SPACE Signed-off-by: Albert ARIBAUD --- board/LaCie/wireless_space/Makefile | 46 ++++++++ board/LaCie/wireless_space/kwbimage.cfg | 82 +++++++++++++ board/LaCie/wireless_space/wireless_space.c | 176 ++++++++++++++++++++++++++++ 3 files changed, 304 insertions(+) create mode 100644 board/LaCie/wireless_space/Makefile create mode 100644 board/LaCie/wireless_space/kwbimage.cfg create mode 100644 board/LaCie/wireless_space/wireless_space.c (limited to 'board') diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile new file mode 100644 index 0000000..b43c3d3 --- /dev/null +++ b/board/LaCie/wireless_space/Makefile @@ -0,0 +1,46 @@ +# +# Copyright (C) 2011 Simon Guinot +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor +# Written-by: Prafulla Wadaskar +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# + +include $(TOPDIR)/config.mk +ifneq ($(OBJTREE),$(SRCTREE)) +$(shell mkdir -p $(obj)../common) +endif + +LIB = $(obj)lib$(BOARD).o + +COBJS := $(BOARD).o ../common/common.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg new file mode 100644 index 0000000..0daf5b5 --- /dev/null +++ b/board/LaCie/wireless_space/kwbimage.cfg @@ -0,0 +1,82 @@ +# +# Copyright (C) 2012 Albert ARIBAUD +# +# Based on netspace_v2 kwbimage.cfg: +# Copyright (C) 2011 Simon Guinot +# +# Based on Kirkwood support: +# (C) Copyright 2009 +# Marvell Semiconductor +# Written-by: Prafulla Wadaskar +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# Refer docs/README.kwimage for more details about how-to configure +# and create kirkwood boot image +# + +# Boot Media configurations +BOOT_FROM nand # Boot from NAND flash +NAND_PAGE_SIZE 800 + +# SOC registers configuration using bootrom header extension +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed + +# Values taken from image original LaCie U-Boot header dump! + +# Configure RGMII-0 interface pad voltage to 1.8V +DATA 0xFFD100e0 0x1B1B1B9B + +#Dram initalization for SINGLE x16 CL=5 @ 400MHz +DATA 0xFFD01400 0x43000c30 # DDR Configuration register + +DATA 0xFFD01404 0x37743000 # DDR Controller Control Low + +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1) + +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High) + +DATA 0xFFD01410 0x0000CCCC # DDR Address Control + +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control + +DATA 0xFFD01418 0x00000000 # DDR Operation + +DATA 0xFFD0141C 0x00000662 # DDR Mode + +DATA 0xFFD01420 0x00000004 # DDR Extended Mode + +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High + +DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values) + +DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values) + +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size +DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0 +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled +DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low) +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High) +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control +DATA 0xFFD01480 0x00000001 # DDR Initialization Control +DATA 0xFFD20134 0x66666666 +DATA 0xFFD20138 0x66666666 +DATA 0xFFD10000 0x01112222 +DATA 0xFFD1000C 0x00000000 +DATA 0xFFD10104 0x00000000 +DATA 0xFFD10100 0x40000000 +# End of Header extension +DATA 0x0 0x0 diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c new file mode 100644 index 0000000..2080658 --- /dev/null +++ b/board/LaCie/wireless_space/wireless_space.c @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2011 Simon Guinot + * + * Based on Kirkwood support: + * (C) Copyright 2009 + * Marvell Semiconductor + * Written-by: Prafulla Wadaskar + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include + +#include "../common/common.h" +#include "netdev.h" + +DECLARE_GLOBAL_DATA_PTR; + +/* GPIO configuration: start FAN at low speed, USB and HDD */ + +#define WIRELESS_SPACE_OE_LOW 0xFF006808 +#define WIRELESS_SPACE_OE_HIGH 0x0000F989 +#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080 +#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240 + +#define WIRELESS_SPACE_REAR_BUTTON 13 +#define WIRELESS_SPACE_FRONT_BUTTON 43 + +const u32 kwmpp_config[] = { + MPP0_NF_IO2, + MPP1_NF_IO3, + MPP2_NF_IO4, + MPP3_NF_IO5, + MPP4_NF_IO6, + MPP5_NF_IO7, + MPP6_SYSRST_OUTn, + MPP7_GPO, /* Fan speed (bit 1) */ + MPP8_TW_SDA, + MPP9_TW_SCK, + MPP10_UART0_TXD, + MPP11_UART0_RXD, + MPP13_GPIO, /* Red led */ + MPP14_GPIO, /* USB fuse */ + MPP15_SATA0_ACTn, + MPP16_GPIO, /* SATA 0 power */ + MPP17_GPIO, /* SATA 1 power */ + MPP18_NF_IO0, + MPP19_NF_IO1, + MPP20_GE1_0, /* Gigabit Ethernet 1 */ + MPP21_GE1_1, + MPP22_GE1_2, + MPP23_GE1_3, + MPP24_GE1_4, + MPP25_GE1_5, + MPP26_GE1_6, + MPP27_GE1_7, + MPP28_GE1_8, + MPP29_GE1_9, + MPP30_GE1_10, + MPP31_GE1_11, + MPP32_GE1_12, + MPP33_GE1_13, + MPP34_GE1_14, + MPP35_GE1_15, + MPP36_GPIO, /* Fan speed (bit 2) */ + MPP37_GPIO, /* Fan speed (bit 0) */ + MPP38_GPIO, /* Fan power */ + MPP39_GPIO, /* Fan rotation fail */ + MPP40_GPIO, /* Ethernet switch link */ + MPP41_GPIO, /* USB enable host vbus */ + MPP42_GPIO, /* LED clock control */ + MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */ + MPP44_GPIO, /* Red LED on/off */ + MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */ + MPP46_GPIO, /* Green LED on/off */ + MPP47_GPIO, /* LED (blue, green) SATA activity blink */ + MPP48_GPIO, /* Blue LED on/off */ + 0 +}; + +struct mv88e61xx_config swcfg = { + .name = "egiga0", + .vlancfg = MV88E61XX_VLANCFG_ROUTER, + .rgmii_delay = MV88E61XX_RGMII_DELAY_EN, + .led_init = MV88E61XX_LED_INIT_EN, + .mdip = MV88E61XX_MDIP_NOCHANGE, + .portstate = MV88E61XX_PORTSTT_FORWARDING, + .cpuport = 0x20, + .ports_enabled = 0x3F, +}; + +int board_early_init_f(void) +{ + /* Gpio configuration */ + kw_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH, + WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH); + + /* Multi-Purpose Pins Functionality configuration */ + kirkwood_mpp_conf(kwmpp_config, NULL); + + return 0; +} + +int board_init(void) +{ + /* Machine number */ + gd->bd->bi_arch_number = CONFIG_MACH_TYPE; + + /* Boot parameters address */ + gd->bd->bi_boot_params = kw_sdram_bar(0) + 0x100; + + return 0; +} + +#if defined(CONFIG_MISC_INIT_R) +int misc_init_r(void) +{ +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) + if (!getenv("ethaddr")) { + uchar mac[6]; + if (lacie_read_mac_address(mac) == 0) + eth_setenv_enetaddr("ethaddr", mac); + } +#endif + return 0; +} +#endif + +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R) +/* Configure and initialize PHY */ +void reset_phy(void) +{ + /* configure switch on egiga0 */ + mv88e61xx_switch_initialize(&swcfg); +} +#endif + +#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD) +/* Return GPIO button status */ +static int +do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) +{ + if (strcmp(argv[1], "button") == 0) { + if (strcmp(argv[2], "rear") == 0) + /* invert GPIO result for intuitive while/until use */ + return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON); + else if (strcmp(argv[2], "front") == 0) + return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON); + else + return -1; + } else { + return -1; + } +} + +U_BOOT_CMD(ws, 3, 0, do_ws, + "Return GPIO button status 0=off 1=on", + "- ws button rear|front: test buttons' states\n" +); +#endif -- cgit v1.1 From 23c9946a3bfc23e3ede8995437d6b0e3b7b1335c Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Thu, 4 Oct 2012 06:54:25 +0000 Subject: lsxl: unset ncip for rescue mode Instead of using the serverip we get from the DHCP server, implicitly use the broadcast address, which is automatically set when no ncip environment variable is set. That way it isn't necessary to use a special DHCP configuration to set the netconsole peer. Signed-off-by: Michael Walle Cc: Prafulla Wadaskar --- board/buffalo/lsxl/lsxl.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'board') diff --git a/board/buffalo/lsxl/lsxl.c b/board/buffalo/lsxl/lsxl.c index f298020..83eea04 100644 --- a/board/buffalo/lsxl/lsxl.c +++ b/board/buffalo/lsxl/lsxl.c @@ -49,9 +49,8 @@ * you can do this only with a working network connection. Therefore, a random * ethernet address is generated if none is set and a DHCP request is sent. * After a successful DHCP response is received, the network settings are - * configured and the ncip parameter is set to the serverip. Eg. for a working - * resuce mode, you should set 'next-server' to the host where the netconsole - * client is started. + * configured and the ncip is unset. Therefore, all netconsole packets are + * broadcasted. * Additionally, the bootsource is set to 'rescue'. */ -- cgit v1.1