From 70ed869ea5f6b1d13d7b140c83ec0dcd8a127ddc Mon Sep 17 00:00:00 2001 From: Vivek Mahajan Date: Tue, 27 Oct 2009 12:18:55 +0530 Subject: ppc/85xx/pci: fsl_pci_init: pcie agent mode support Originally written by Jason Jin and Mingkai Hu for mpc8536. When QorIQ based board is configured as a PCIe agent, then unlock/enable inbound PCI configuration cycles and init a 4K inbound memory window; so that a PCIe host can access the PCIe agents SDRAM at address 0x0 * Supported in fsl_pci_init_port() after adding pcie_ep as a param * Revamped copyright in drivers/pci/fsl_pci_init.c * Mods in 85xx based board specific pci init after this change Signed-off-by: Vivek Mahajan Signed-off-by: Kumar Gala --- board/freescale/mpc8572ds/mpc8572ds.c | 6 +++--- board/freescale/p1_p2_rdb/pci.c | 4 ++-- board/freescale/p2020ds/p2020ds.c | 6 +++--- board/sbc8548/sbc8548.c | 4 ++-- 4 files changed, 10 insertions(+), 10 deletions(-) (limited to 'board') diff --git a/board/freescale/mpc8572ds/mpc8572ds.c b/board/freescale/mpc8572ds/mpc8572ds.c index 933dd12..2b32234 100644 --- a/board/freescale/mpc8572ds/mpc8572ds.c +++ b/board/freescale/mpc8572ds/mpc8572ds.c @@ -199,7 +199,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); + &pcie3_hose, first_free_busno, pcie_ep); /* * Activate ULI1575 legacy chip by performing a fake * memory access. Needed to make ULI RTC work. @@ -231,7 +231,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); } else { printf (" PCIE2: disabled\n"); } @@ -251,7 +251,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf (" PCIE1: disabled\n"); } diff --git a/board/freescale/p1_p2_rdb/pci.c b/board/freescale/p1_p2_rdb/pci.c index 4c08f9e..7736596 100644 --- a/board/freescale/p1_p2_rdb/pci.c +++ b/board/freescale/p1_p2_rdb/pci.c @@ -71,7 +71,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); } else { printf (" PCIE2: disabled\n"); } @@ -90,7 +90,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf (" PCIE1: disabled\n"); } diff --git a/board/freescale/p2020ds/p2020ds.c b/board/freescale/p2020ds/p2020ds.c index e38c014..9878fba 100644 --- a/board/freescale/p2020ds/p2020ds.c +++ b/board/freescale/p2020ds/p2020ds.c @@ -227,7 +227,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie2_hose, first_free_busno); + &pcie2_hose, first_free_busno, pcie_ep); /* * The workaround doesn't work on p2020 because the location @@ -267,7 +267,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie3_hose, first_free_busno); + &pcie3_hose, first_free_busno, pcie_ep); } else { printf(" PCIE3: disabled\n"); } @@ -286,7 +286,7 @@ void pci_init_board(void) pcie_ep ? "End Point" : "Root Complex", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, pcie_ep); } else { printf(" PCIE1: disabled\n"); } diff --git a/board/sbc8548/sbc8548.c b/board/sbc8548/sbc8548.c index 194f6ab..5e3e176 100644 --- a/board/sbc8548/sbc8548.c +++ b/board/sbc8548/sbc8548.c @@ -359,7 +359,7 @@ pci_init_board(void) SET_STD_PCI_INFO(pci_info[num], 1); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pci1_hose, first_free_busno); + &pci1_hose, first_free_busno, 0); } else { printf (" PCI: disabled\n"); } @@ -378,7 +378,7 @@ pci_init_board(void) SET_STD_PCIE_INFO(pci_info[num], 1); printf (" PCIE at base address %lx\n", pci_info[num].regs); first_free_busno = fsl_pci_init_port(&pci_info[num++], - &pcie1_hose, first_free_busno); + &pcie1_hose, first_free_busno, 0); } else { printf (" PCIE: disabled\n"); } -- cgit v1.1