From 63e73c9a8ed5b32d9c4067ffaad953e9a8fe8f0a Mon Sep 17 00:00:00 2001 From: wdenk Date: Mon, 23 Feb 2004 22:22:28 +0000 Subject: * Patches by Reinhard Meyer, 14 Feb 2004: - update board/emk tree; use common flash driver - Corrected tested bits in machine check exception in cpu/mpc5xxx/traps.c [adapted for other PPC CPUs -- wd] - Added support for the M48T08 on the EVAL5200 board in rtc/mk48t59.c * Patch by Jon Diekema, 13 Feb 2004: Call show_boot_progress() whenever POST "FAILED" is printed. * Patch by Nishant Kamat, 13 Feb 2004: Add support for TI OMAP1610 H2 Board Fixes for cpu/arm926ejs/interrupt.c (based on Richard Woodruff's patch for arm925, 16 Oct 03) Fix for a timer bug in OMAP1610 Innovator Add support for CS0 (ROM)/CS3 (Flash) boot in OMAP1610 Innovator and H2 * Patches by Stephan Linz, 12 Feb 2004: - add support for NIOS timer with variable period preload counter value - prepare POST framework support for NIOS targets * Patch by Denis Peter, 11 Feb 2004: add POST support for the MIP405 board --- board/emk/common/flash.c | 65 ++++- board/emk/top5200/Makefile | 2 +- board/emk/top5200/flash.c | 502 ---------------------------------- board/emk/top5200/top5200.c | 50 +--- board/emk/top860/Makefile | 2 +- board/emk/top860/flash.c | 489 --------------------------------- board/emk/top860/top860.c | 63 ++--- board/mpl/mip405/mip405.c | 12 + board/omap1610inn/omap1610innovator.c | 25 +- board/omap1610inn/platform.S | 49 ++++ 10 files changed, 159 insertions(+), 1100 deletions(-) delete mode 100644 board/emk/top5200/flash.c delete mode 100644 board/emk/top860/flash.c (limited to 'board') diff --git a/board/emk/common/flash.c b/board/emk/common/flash.c index b2a2138..adfa9a0 100644 --- a/board/emk/common/flash.c +++ b/board/emk/common/flash.c @@ -28,15 +28,33 @@ flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ -typedef unsigned char FLASH_PORT_WIDTH; -typedef volatile unsigned char FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFF +#if defined (CONFIG_TOP860) + typedef unsigned short FLASH_PORT_WIDTH; + typedef volatile unsigned short FLASH_PORT_WIDTHV; + #define FLASH_ID_MASK 0xFF + + #define FPW FLASH_PORT_WIDTH + #define FPWV FLASH_PORT_WIDTHV + + #define FLASH_CYCLE1 0x0555 + #define FLASH_CYCLE2 0x02aa + #define FLASH_ID1 0 + #define FLASH_ID2 1 +#endif + +#if defined (CONFIG_TOP5200) + typedef unsigned char FLASH_PORT_WIDTH; + typedef volatile unsigned char FLASH_PORT_WIDTHV; + #define FLASH_ID_MASK 0xFF -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV + #define FPW FLASH_PORT_WIDTH + #define FPWV FLASH_PORT_WIDTHV -#define FLASH_CYCLE1 0x0aaa -#define FLASH_CYCLE2 0x0555 + #define FLASH_CYCLE1 0x0aaa + #define FLASH_CYCLE2 0x0555 + #define FLASH_ID1 0 + #define FLASH_ID2 2 +#endif /*----------------------------------------------------------------------- * Functions @@ -179,12 +197,33 @@ void flash_print_info (flash_info_t *info) printf (" Sector Start Addresses:"); for (i=0; isector_count; ++i) { + ulong size; + int erased; + ulong *flash = (unsigned long *) info->start[i]; + if ((i % 5) == 0) { printf ("\n "); } - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); + /* + * Check if whole sector is erased + */ + size = + (i != (info->sector_count - 1)) ? + (info->start[i + 1] - info->start[i]) >> 2 : + (info->start[0] + info->size - info->start[i]) >> 2; + + for ( + flash = (unsigned long *) info->start[i], erased = 1; + (flash != (unsigned long *) info->start[i] + size) && erased; + flash++ + ) + erased = *flash == ~0x0UL; + + printf (" %08lX %s %s", + info->start[i], + erased ? "E": " ", + info->protect[i] ? "(RO)" : " "); } printf ("\n"); @@ -212,7 +251,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) * This works for any bus width and any FLASH device width. */ udelay(100); - switch (addr[0] & 0xff) { + switch (addr[FLASH_ID1] & 0xff) { case (uchar)AMD_MANUFACT: info->flash_id = FLASH_MAN_AMD; @@ -225,7 +264,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) #endif default: - printf ("unknown vendor=%x ", addr[0] & 0xff); + printf ("unknown vendor=%x ", addr[FLASH_ID1] & 0xff); info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; @@ -233,7 +272,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) } /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) { + if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[FLASH_ID2]) { case (FPW)AMD_ID_LV160B: info->flash_id += FLASH_AM160B; @@ -255,7 +294,7 @@ ulong flash_get_size (FPWV *addr, flash_info_t *info) break; default: - printf ("unknown AMD device=%x ", (FPW)addr[2]); + printf ("unknown AMD device=%x ", (FPW)addr[FLASH_ID2]); info->flash_id = FLASH_UNKNOWN; info->sector_count = 0; info->size = 0; diff --git a/board/emk/top5200/Makefile b/board/emk/top5200/Makefile index eb5ed59..986608b 100644 --- a/board/emk/top5200/Makefile +++ b/board/emk/top5200/Makefile @@ -26,7 +26,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS := $(BOARD).o flash.o +OBJS := $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o $(LIB): $(OBJS) $(SOBJS) $(AR) crv $@ $(OBJS) diff --git a/board/emk/top5200/flash.c b/board/emk/top5200/flash.c deleted file mode 100644 index 216bce3..0000000 --- a/board/emk/top5200/flash.c +++ /dev/null @@ -1,502 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2003 - * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -typedef unsigned char FLASH_PORT_WIDTH; -typedef volatile unsigned char FLASH_PORT_WIDTHV; -#define FLASH_ID_MASK 0xFF - -#define FPW FLASH_PORT_WIDTH -#define FPWV FLASH_PORT_WIDTHV - -#define FLASH_CYCLE1 0x0aaa -#define FLASH_CYCLE2 0x0555 - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(FPWV *addr, flash_info_t *info); -static void flash_reset(flash_info_t *info); -static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data); -static flash_info_t *flash_get_info(ulong base); - -/*----------------------------------------------------------------------- - * flash_init() - * - * sets up flash_info and returns size of FLASH (bytes) - */ -unsigned long flash_init (void) -{ - unsigned long size = 0; - int i = 0; - extern void flash_preinit(void); - extern void flash_afterinit(uint, ulong, ulong); - ulong flashbase = CFG_FLASH_BASE; - - flash_preinit(); - - /* There is only ONE FLASH device */ - memset(&flash_info[i], 0, sizeof(flash_info_t)); - flash_info[i].size = - flash_get_size((FPW *)flashbase, &flash_info[i]); - size += flash_info[i].size; - -#if CFG_MONITOR_BASE >= CFG_FLASH_BASE - /* monitor protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CFG_MONITOR_BASE, - CFG_MONITOR_BASE+monitor_flash_len-1, - flash_get_info(CFG_MONITOR_BASE)); -#endif - -#ifdef CFG_ENV_IS_IN_FLASH - /* ENV protection ON by default */ - flash_protect(FLAG_PROTECT_SET, - CFG_ENV_ADDR, - CFG_ENV_ADDR+CFG_ENV_SIZE-1, - flash_get_info(CFG_ENV_ADDR)); -#endif - - - flash_afterinit(i, flash_info[i].start[0], flash_info[i].size); - return size ? size : 1; -} - -/*----------------------------------------------------------------------- - */ -static void flash_reset(flash_info_t *info) -{ - FPWV *base = (FPWV *)(info->start[0]); - - /* Put FLASH back in read mode */ - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL) - *base = (FPW)0x00FF00FF; /* Intel Read Mode */ - else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD) - *base = (FPW)0x00F000F0; /* AMD Read Mode */ -} - -/*----------------------------------------------------------------------- - */ - -static flash_info_t *flash_get_info(ulong base) -{ - int i; - flash_info_t * info; - - for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) { - info = & flash_info[i]; - if (info->size && - info->start[0] <= base && base <= info->start[0] + info->size - 1) - break; - } - - return i == CFG_MAX_FLASH_BANKS ? 0 : info; -} - -/*----------------------------------------------------------------------- - */ - -void flash_print_info (flash_info_t *info) -{ - int i; - uchar *boottype; - uchar *bootletter; - uchar *fmt; - uchar botbootletter[] = "B"; - uchar topbootletter[] = "T"; - uchar botboottype[] = "bottom boot sector"; - uchar topboottype[] = "top boot sector"; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; -#if 0 - case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break; - case FLASH_MAN_FUJ: printf ("FUJITSU "); break; - case FLASH_MAN_SST: printf ("SST "); break; - case FLASH_MAN_STM: printf ("STM "); break; - case FLASH_MAN_INTEL: printf ("INTEL "); break; -#endif - default: printf ("Unknown Vendor "); break; - } - - /* check for top or bottom boot, if it applies */ - if (info->flash_id & FLASH_BTYPE) { - boottype = botboottype; - bootletter = botbootletter; - } - else { - boottype = topboottype; - bootletter = topbootletter; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM160T: - case FLASH_AM160B: - fmt = "29LV160%s (16 Mbit, %s)\n"; - break; - case FLASH_AMDLV065D: - fmt = "29LV065 (64 Mbit, uniform sectors)\n"; - break; - default: - fmt = "Unknown Chip Type\n"; - break; - } - - printf (fmt, bootletter, boottype); - - printf (" Size: %ld MB in %d Sectors\n", - info->size >> 20, - info->sector_count); - - printf (" Sector Start Addresses:"); - - for (i=0; isector_count; ++i) { - if ((i % 5) == 0) { - printf ("\n "); - } - - printf (" %08lX%s", info->start[i], - info->protect[i] ? " (RO)" : " "); - } - - printf ("\n"); -} - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ - -ulong flash_get_size (FPWV *addr, flash_info_t *info) -{ - int i; - ulong offset; - - /* Write auto select command: read Manufacturer ID */ - /* Write auto select command sequence and test FLASH answer */ - addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */ - addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */ - - /* The manufacturer codes are only 1 byte, so just use 1 byte. - * This works for any bus width and any FLASH device width. - */ - udelay(100); - switch (addr[0] & 0xff) { - - case (uchar)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - -#if 0 - case (uchar)INTEL_MANUFACT: - info->flash_id = FLASH_MAN_INTEL; - break; -#endif - - default: - printf ("unknown vendor=%x ", addr[0] & 0xff); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - break; - } - - /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */ - if (info->flash_id != FLASH_UNKNOWN) switch ((FPW)addr[2]) { - - case (FPW)AMD_ID_LV160B: - info->flash_id += FLASH_AM160B; - info->sector_count = 35; - info->size = 0x00200000; -#ifdef CFG_LOWBOOT - offset = 0; -#else - offset = 0x00e00000; -#endif - info->start[0] = (ulong)addr + offset; - info->start[1] = (ulong)addr + offset + 0x4000; - info->start[2] = (ulong)addr + offset + 0x6000; - info->start[3] = (ulong)addr + offset + 0x8000; - for (i = 4; i < info->sector_count; i++) - { - info->start[i] = (ulong)addr + offset + 0x10000 * (i-3); - } - break; - - case (FPW)AMD_ID_LV065D: - info->flash_id += FLASH_AMDLV065D; - info->sector_count = 128; - info->size = 0x00800000; -#ifdef CFG_LOWBOOT - offset = 0; -#else - offset = 0x00800000; -#endif - for( i = 0; i < info->sector_count; i++ ) - info->start[i] = (ulong)addr + offset + (i * 0x10000); - break; /* => 8 or 16 MB */ - - default: - printf ("unknown AMD device=%x ", (FPW)addr[2]); - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* => no or unknown flash */ - } - - /* Put FLASH back in read mode */ - flash_reset(info); - - return (info->size); -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - FPWV *addr; - int flag, prot, sect; - int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL; - ulong start, now, last; - int rcode = 0; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AMDLV065D: - break; - case FLASH_UNKNOWN: - default: - printf ("Can't erase unknown flash type %08lx - aborted\n", - info->flash_id); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - last = get_timer(0); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last && rcode == 0; sect++) { - - if (info->protect[sect] != 0) /* protected, skip it */ - continue; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr = (FPWV *)(info->start[sect]); - if (intel) { - *addr = (FPW)0x00500050; /* clear status register */ - *addr = (FPW)0x00200020; /* erase setup */ - *addr = (FPW)0x00D000D0; /* erase confirm */ - } - else { - /* must be AMD style if not Intel */ - FPWV *base; /* first address in bank */ - - base = (FPWV *)(info->start[0]); - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */ - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - *addr = (FPW)0x00300030; /* erase sector */ - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer(0); - - /* wait at least 50us for AMD, 80us for Intel. - * Let's wait 1 ms. - */ - udelay (1000); - - while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) { - if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - - if (intel) { - /* suspend erase */ - *addr = (FPW)0x00B000B0; - } - - flash_reset(info); /* reset to read mode */ - rcode = 1; /* failed */ - break; - } - - /* show that we're waiting */ - if ((get_timer(last)) > CFG_HZ) {/* every second */ - putc ('.'); - last = get_timer(0); - } - } - - /* show that we're waiting */ - if ((get_timer(last)) > CFG_HZ) { /* every second */ - putc ('.'); - last = get_timer(0); - } - - flash_reset(info); /* reset to read mode */ - } - - printf (" done\n"); - return rcode; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */ - int bytes; /* number of bytes to program in current word */ - int left; /* number of bytes left to program */ - int i, res; - - for (left = cnt, res = 0; - left > 0 && res == 0; - addr += sizeof(data), left -= sizeof(data) - bytes) { - - bytes = addr & (sizeof(data) - 1); - addr &= ~(sizeof(data) - 1); - - /* combine source and destination data so can program - * an entire word of 16 or 32 bits - */ - for (i = 0; i < sizeof(data); i++) { - data <<= 8; - if (i < bytes || i - bytes >= left ) - data += *((uchar *)addr + i); - else - data += *src++; - } - - /* write one word to the flash */ - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - res = write_word_amd(info, (FPWV *)addr, data); - break; - default: - /* unknown flash type, error! */ - printf ("missing or unknown FLASH type\n"); - res = 1; /* not really a timeout, but gives error */ - break; - } - } - - return (res); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash for AMD FLASH - * A word is 16 or 32 bits, whichever the bus width of the flash bank - * (not an individual chip) is. - * - * returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data) -{ - ulong start; - int flag; - int res = 0; /* result, assume success */ - FPWV *base; /* first address in flash bank */ - - /* Check if Flash is (sufficiently) erased */ - if ((*dest & data) != data) { - return (2); - } - - - base = (FPWV *)(info->start[0]); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */ - base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */ - base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */ - - *dest = data; /* start programming the data */ - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - start = get_timer (0); - - /* data polling for D7 */ - while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) { - if (get_timer(start) > CFG_FLASH_WRITE_TOUT) { - *dest = (FPW)0x00F000F0; /* reset bank */ - res = 1; - } - } - - return (res); -} diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c index 3969e2a..b65d2d0 100644 --- a/board/emk/top5200/top5200.c +++ b/board/emk/top5200/top5200.c @@ -156,53 +156,9 @@ void flash_afterinit(uint bank, ulong start, ulong size) int misc_init_r (void) { /* read 'factory' part of EEPROM */ - uchar buf[81]; - uchar *p; - uint length; - uint addr; - uint len; - - /* get length first */ - addr = CFG_FACT_OFFSET; - if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) { -bailout: - printf ("cannot read factory configuration\n"); - printf ("be sure to set ethaddr yourself!\n"); - return 0; - } - length = buf[0] + (buf[1] << 8); - addr += 2; - - /* sanity check */ - if (length < 20 || length > CFG_FACT_SIZE - 2) - goto bailout; - - /* read lines */ - while (length > 0) { - /* read one line */ - len = length > 80 ? 80 : length; - if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len)) - goto bailout; - /* mark end of buffer */ - buf[len] = 0; - /* search end of line */ - for (p = buf; *p && *p != 0x0a; p++); - if (!*p) - goto bailout; - *p++ = 0; - /* advance to next line start */ - length -= p - buf; - addr += p - buf; - /*printf ("%s\n", buf); */ - /* search for our specific entry */ - if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) { - setenv ("ethaddr", buf + 19); - } else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) { - setenv ("serial#", buf + 15); - } else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) { - setenv ("board_id", buf + 13); - } - } + extern void read_factory_r (void); + read_factory_r (); + return (0); } diff --git a/board/emk/top860/Makefile b/board/emk/top860/Makefile index 13ce9fc..a74dd2f 100644 --- a/board/emk/top860/Makefile +++ b/board/emk/top860/Makefile @@ -25,7 +25,7 @@ include $(TOPDIR)/config.mk LIB = lib$(BOARD).a -OBJS = $(BOARD).o flash.o +OBJS = $(BOARD).o ../common/flash.o ../common/vpd.o ../common/am79c874.o $(LIB): .depend $(OBJS) $(AR) crv $@ $(OBJS) diff --git a/board/emk/top860/flash.c b/board/emk/top860/flash.c deleted file mode 100644 index 0f827df..0000000 --- a/board/emk/top860/flash.c +++ /dev/null @@ -1,489 +0,0 @@ -/* - * (C) Copyright 2003 - * EMK Elektronik GmbH - * Reinhard Meyer - * - * copied from the BMW Port - seems that its similiar enough - * to be easily adaped ;) --- Well, it turned out to become a - * merger between parts of the EMKstax Flash routines and the - * BMW funtion frames... - * - * (C) Copyright 2000 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * See file CREDITS for list of people who contributed to this - * project. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, - * MA 02111-1307 USA - */ - -#include -#include - -#define FLASH_WORD_SIZE unsigned short -#define FLASH_WORD_WIDTH (sizeof (FLASH_WORD_SIZE)) - -flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word (flash_info_t *info, ulong dest, ulong data); - - -/***************************************************************************** - * software product ID entry/exit - *****************************************************************************/ -static void FlashProductIdMode ( - volatile FLASH_WORD_SIZE *b, - int on_off) -{ - b[0x5555] = 0xaa; - b[0x2aaa] = 0x55; - b[0x5555] = on_off ? 0x90 : 0xf0; -} - -/***************************************************************************** - * sector erase start - *****************************************************************************/ -static void FlashSectorErase ( - volatile FLASH_WORD_SIZE *b, - volatile FLASH_WORD_SIZE *a) -{ - b[0x5555] = 0xaa; - b[0x2aaa] = 0x55; - b[0x5555] = 0x80; - b[0x5555] = 0xaa; - b[0x2aaa] = 0x55; - a[0] = 0x30; -} - -/***************************************************************************** - * program a word - *****************************************************************************/ -static void FlashProgWord ( - volatile FLASH_WORD_SIZE *b, - volatile FLASH_WORD_SIZE *a, - FLASH_WORD_SIZE v) -{ - b[0x5555] = 0xaa; - b[0x2aaa] = 0x55; - b[0x5555] = 0xa0; - a[0] = v; -} - -/***************************************************************************** - * reset bank, back to read mode - *****************************************************************************/ -static void FlashReset (volatile FLASH_WORD_SIZE *b) -{ - b[0] = 0xf0; -} - -/***************************************************************************** - * identify FLASH chip - * this code is a stripped version of the FlashGetType() function in EMKstax - *****************************************************************************/ -unsigned long flash_init (void) -{ - volatile FLASH_WORD_SIZE * const flash = (volatile FLASH_WORD_SIZE *) CFG_FLASH_BASE; - FLASH_WORD_SIZE manu, dev; - flash_info_t * const pflinfo = &flash_info[0]; - int j; - - /* get Id Bytes */ - FlashProductIdMode (flash, 1); - manu = flash[0]; - dev = flash[1]; - FlashProductIdMode (flash, 0); - - pflinfo->size = 0; - pflinfo->sector_count = 0; - pflinfo->flash_id = 0xffffffff; - pflinfo->portwidth = FLASH_CFI_16BIT; - pflinfo->chipwidth = FLASH_CFI_BY16; - - switch (manu&0xff) - { - case 0x01: /* AMD */ - pflinfo->flash_id = FLASH_MAN_AMD; - switch (dev&0xff) - { - case 0x49: - pflinfo->size = 0x00200000; - pflinfo->sector_count = 35; - pflinfo->flash_id |= FLASH_AM160B; - pflinfo->start[0] = CFG_FLASH_BASE; - pflinfo->start[1] = CFG_FLASH_BASE + 0x4000; - pflinfo->start[2] = CFG_FLASH_BASE + 0x6000; - pflinfo->start[3] = CFG_FLASH_BASE + 0x8000; - for (j = 4; j < 35; j++) - { - pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-3); - } - break; - - case 0xf9: - pflinfo->size = 0x00400000; - pflinfo->sector_count = 71; - pflinfo->flash_id |= FLASH_AM320B; - pflinfo->start[0] = CFG_FLASH_BASE; - pflinfo->start[1] = CFG_FLASH_BASE + 0x4000; - pflinfo->start[2] = CFG_FLASH_BASE + 0x6000; - pflinfo->start[3] = CFG_FLASH_BASE + 0x8000; - for (j = 0; j < 8; j++) - { - pflinfo->start[j] = CFG_FLASH_BASE + 0x00002000 * (j); - } - for (j = 8; j < 71; j++) - { - pflinfo->start[j] = CFG_FLASH_BASE + 0x00010000 * (j-7); - } - break; - - default: - printf ("unknown AMD dev=%x ", dev); - pflinfo->flash_id |= FLASH_UNKNOWN; - } - break; - - default: - printf ("unknown manu=%x ", manu); - } - return pflinfo->size; -} - -/***************************************************************************** - * print info about a FLASH - *****************************************************************************/ -void flash_print_info (flash_info_t *info) -{ - static const char unk[] = "Unknown"; - unsigned int i; - const char *mfct=unk, - *type=unk; - - if(info->flash_id != FLASH_UNKNOWN) - { - switch (info->flash_id & FLASH_VENDMASK) - { - case FLASH_MAN_AMD: - mfct = "AMD"; - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) - { - case FLASH_AM160B: - type = "AM29LV160B (16 Mbit, bottom boot sect)"; - break; - case FLASH_AM320B: - type = "AM29LV320B (32 Mbit, bottom boot sect)"; - break; - } - } - - printf ( - "\n Brand: %s Type: %s\n" - " Size: %lu KB in %d Sectors\n", - mfct, - type, - info->size >> 10, - info->sector_count - ); - - printf (" Sector Start Addresses:"); - - for (i = 0; i < info->sector_count; i++) - { - unsigned long size; - unsigned int erased; - unsigned long *flash = (unsigned long *) info->start[i]; - - /* - * Check if whole sector is erased - */ - size = - (i != (info->sector_count - 1)) ? - (info->start[i + 1] - info->start[i]) >> 2 : - (info->start[0] + info->size - info->start[i]) >> 2; - - for ( - flash = (unsigned long *) info->start[i], erased = 1; - (flash != (unsigned long *) info->start[i] + size) && erased; - flash++ - ) - erased = *flash == ~0x0UL; - - printf ( - "%s %08lX %s %s", - (i % 5) ? "" : "\n ", - info->start[i], - erased ? "E" : " ", - info->protect[i] ? "RO" : " " - ); - } - - puts ("\n"); - return; -} - -/***************************************************************************** - * erase one or more sectors - *****************************************************************************/ -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - int flag, - prot, - sect, - l_sect; - ulong start, - now, - last; - - if ((s_first < 0) || (s_first > s_last)) - { - if (info->flash_id == FLASH_UNKNOWN) - { - printf ("- missing\n"); - } - else - { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if ((info->flash_id == FLASH_UNKNOWN) || - (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) - { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) - { - if (info->protect[sect]) - { - prot++; - } - } - - if (prot) - { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } - else - { - printf ("\n"); - } - - l_sect = -1; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) - { - if (info->protect[sect] == 0) - { /* not protected */ - FlashSectorErase ((FLASH_WORD_SIZE *)info->start[0], (FLASH_WORD_SIZE *)info->start[sect]); - l_sect = sect; - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* - * We wait for the last triggered sector - */ - if (l_sect < 0) - goto DONE; - - start = get_timer (0); - last = start; - addr = (FLASH_WORD_SIZE *)info->start[l_sect]; - while ((addr[0] & 0x0080) != 0x0080) - { - if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) - { - printf ("Timeout\n"); - return 1; - } - /* show that we're waiting */ - if ((now - last) > 1000) - { /* every second */ - serial_putc ('.'); - last = now; - } - } - - DONE: - /* reset to read mode */ - FlashReset ((FLASH_WORD_SIZE *)info->start[0]); - - printf (" done\n"); - return 0; -} - -/***************************************************************************** - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - *****************************************************************************/ -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, - wp, - data; - int i, - l, - rc; - - wp = (addr & ~(FLASH_WORD_WIDTH-1)); /* get lower word aligned address */ - - /* - * handle unaligned start bytes, if there are... - */ - if ((l = addr - wp) != 0) - { - data = 0; - - /* get the current before the new data into our data word */ - for (i=0, cp=wp; i0; ++i, ++cp, --cnt) - { - data = (data << 8) | *src++; - } - - /* get the current after the new data into our data word */ - for (; cnt==0 && i= FLASH_WORD_WIDTH) - { - data = 0; - for (i=0; i0; ++i, ++cp) - { - data = (data << 8) | *src++; - --cnt; - } - - /* get the current after the new data into our data word */ - for (; istart[0]; - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *)dest; - FLASH_WORD_SIZE data2 = data; - ulong start; - int flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*dest2 & data2) != data2) - { - return (2); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - FlashProgWord (addr2, dest2, data2); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((*dest2 & 0x0080) != (data2 & 0x0080)) - { - if (get_timer (start) > CFG_FLASH_WRITE_TOUT) - { - return (1); - } - } - - return (0); -} - -/*----------------------------------------------------------------------- - */ diff --git a/board/emk/top860/top860.c b/board/emk/top860/top860.c index d13be98..931c0d1 100644 --- a/board/emk/top860/top860.c +++ b/board/emk/top860/top860.c @@ -120,58 +120,29 @@ long int initdram (int board_type) } /***************************************************************************** + * prepare for FLASH detection + *****************************************************************************/ +void flash_preinit(void) +{ +} + +/***************************************************************************** + * finalize FLASH setup + *****************************************************************************/ +void flash_afterinit(uint bank, ulong start, ulong size) +{ +} + +/***************************************************************************** * otherinits after RAM is there and we are relocated to RAM * note: though this is an int function, nobody cares for the result! *****************************************************************************/ int misc_init_r (void) { /* read 'factory' part of EEPROM */ - uchar buf[81]; - uchar *p; - uint length; - uint addr; - uint len; - - /* get length first */ - addr = CFG_FACT_OFFSET; - if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, 2)) { - bailout: - printf ("cannot read factory configuration\n"); - printf ("be sure to set ethaddr yourself!\n"); - return 0; - } - length = buf[0] + (buf[1] << 8); - addr += 2; + extern void read_factory_r (void); + read_factory_r (); - /* sanity check */ - if (length < 20 || length > CFG_FACT_SIZE - 2) - goto bailout; - - /* read lines */ - while (length > 0) { - /* read one line */ - len = length > 80 ? 80 : length; - if (eeprom_read (CFG_I2C_FACT_ADDR, addr, buf, len)) - goto bailout; - /* mark end of buffer */ - buf[len] = 0; - /* search end of line */ - for (p = buf; *p && *p != 0x0a; p++); - if (!*p) - goto bailout; - *p++ = 0; - /* advance to next line start */ - length -= p - buf; - addr += p - buf; - /*printf ("%s\n", buf); */ - /* search for our specific entry */ - if (!strncmp ((char *) buf, "[RLA/lan/Ethernet] ", 19)) { - setenv ("ethaddr", buf + 19); - } else if (!strncmp ((char *) buf, "[BOARD/SERIAL] ", 15)) { - setenv ("serial#", buf + 15); - } else if (!strncmp ((char *) buf, "[BOARD/TYPE] ", 13)) { - setenv ("board_id", buf + 13); - } - } return (0); } + diff --git a/board/mpl/mip405/mip405.c b/board/mpl/mip405/mip405.c index 709e1a4..b1adde6 100644 --- a/board/mpl/mip405/mip405.c +++ b/board/mpl/mip405/mip405.c @@ -709,6 +709,18 @@ void print_mip405_rev (void) var, pcbrev + 'A', part & 0x7F, vers); } + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + return 0; /* No hotkeys supported */ +} +#endif + extern void mem_test_reloc(void); extern int mk_date (char *, struct rtc_time *); diff --git a/board/omap1610inn/omap1610innovator.c b/board/omap1610inn/omap1610innovator.c index d737f1b..0f67a0c 100644 --- a/board/omap1610inn/omap1610innovator.c +++ b/board/omap1610inn/omap1610innovator.c @@ -10,6 +10,8 @@ * Texas Instruments, * Kshitij Gupta * + * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 + * * See file CREDITS for list of people who contributed to this * project. * @@ -105,7 +107,28 @@ void flash__init (void) *************************************************************/ void ether__init (void) { -#define ETH_CONTROL_REG 0x0400000b +#define ETH_CONTROL_REG 0x0400030b + +#ifdef CONFIG_H2_OMAP1610 + #define LAN_RESET_REGISTER 0x0400001c + + /* The debug board on which the lan chip resides may not be powered + * ON at the same time as the OMAP chip. So wait in a loop until the + * lan reset register (on the debug board) is available (powered on) + * and reset the lan chip. + */ + + *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; + do { + *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0001; + udelay (3); + } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0001); + + do { + *((volatile unsigned short *) LAN_RESET_REGISTER) = 0x0000; + udelay (3); + } while (*((volatile unsigned short *) LAN_RESET_REGISTER) != 0x0000); +#endif *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; udelay (3); diff --git a/board/omap1610inn/platform.S b/board/omap1610inn/platform.S index cad152b..1775695 100644 --- a/board/omap1610inn/platform.S +++ b/board/omap1610inn/platform.S @@ -5,6 +5,8 @@ * Texas Instruments, * Kshitij Gupta * + * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 + * * See file CREDITS for list of people who contributed to this * project. * @@ -248,6 +250,22 @@ common_tc: ldr r1, VAL_TC_EMIFS_CS3_CONFIG ldr r0, REG_TC_EMIFS_CS3_CONFIG str r1, [r0] /* Chip Select 3 */ + +#ifdef CONFIG_H2_OMAP1610 + /* inserting additional 2 clock cycle hold time for LAN */ + ldr r0, REG_TC_EMIFS_CS1_ADVANCED + ldr r1, VAL_TC_EMIFS_CS1_ADVANCED + str r1, [r0] +#endif + /* Start MPU Timer 1 */ + ldr r0, REG_MPU_LOAD_TIMER + ldr r1, VAL_MPU_LOAD_TIMER + str r1, [r0] + + ldr r0, REG_MPU_CNTL_TIMER + ldr r1, VAL_MPU_CNTL_TIMER + str r1, [r0] + /* back to arch calling code */ mov pc, lr @@ -266,6 +284,11 @@ REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ .word 0xfffecc1c +#ifdef CONFIG_H2_OMAP1610 +REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ + .word 0xfffecc54 +#endif + /* MPU clock/reset/power mode control registers */ REG_ARM_CKCTL: /* 16 bits */ .word 0xfffece00 @@ -338,6 +361,11 @@ REG_DLL_LRD_CONTROL: REG_WATCHDOG: .word 0xfffec808 +REG_MPU_LOAD_TIMER: + .word 0xfffec600 +REG_MPU_CNTL_TIMER: + .word 0xfffec500 + /* 96 MHz Samsung Mobile DDR */ SDRAM_CONFIG_VAL: .word 0x001200f4 @@ -350,6 +378,7 @@ VAL_ARM_CKCTL: VAL_DPLL1_CTL: .word 0x2830 +#ifdef CONFIG_INNOVATOROMAP1610 VAL_TC_EMIFS_CS0_CONFIG: .word 0x002130b0 VAL_TC_EMIFS_CS1_CONFIG: @@ -358,6 +387,21 @@ VAL_TC_EMIFS_CS2_CONFIG: .word 0x000055f0 VAL_TC_EMIFS_CS3_CONFIG: .word 0x88011131 +#endif + +#ifdef CONFIG_H2_OMAP1610 +VAL_TC_EMIFS_CS0_CONFIG: + .word 0x00203331 +VAL_TC_EMIFS_CS1_CONFIG: + .word 0x8180fff3 +VAL_TC_EMIFS_CS2_CONFIG: + .word 0xf800f22a +VAL_TC_EMIFS_CS3_CONFIG: + .word 0x88011131 +VAL_TC_EMIFS_CS1_ADVANCED: + .word 0x00000022 +#endif + VAL_TC_EMIFF_SDRAM_CONFIG: .word 0x010290fc VAL_TC_EMIFF_MRS: @@ -376,6 +420,11 @@ WATCHDOG_VAL1: WATCHDOG_VAL2: .word 0x000000a0 +VAL_MPU_LOAD_TIMER: + .word 0xffffffff +VAL_MPU_CNTL_TIMER: + .word 0xffffffa1 + /* command values */ .equ CMD_SDRAM_NOP, 0x00000000 .equ CMD_SDRAM_PRECHARGE, 0x00000001 -- cgit v1.1