From 23b6527003ca6a12d7872e9e552160041d8b6285 Mon Sep 17 00:00:00 2001 From: Terry Lv Date: Wed, 24 Jun 2009 11:31:38 +0800 Subject: ENGR00113611: Add FEC support for BBG2. Add FEC support for BBG2. Signed-off-by: Terry Lv --- board/freescale/imx51/imx51.c | 255 ++++++++++++++++++++++++++++++++++-------- 1 file changed, 211 insertions(+), 44 deletions(-) (limited to 'board') diff --git a/board/freescale/imx51/imx51.c b/board/freescale/imx51/imx51.c index b0bbf46..5c3c022 100644 --- a/board/freescale/imx51/imx51.c +++ b/board/freescale/imx51/imx51.c @@ -24,13 +24,14 @@ #include #include -#include #include #include #include +#include #include #include "board-imx51.h" #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -158,48 +159,6 @@ static void setup_expio(void) writew(reg, mx51_io_base_addr + PBC_SW_RESET); } -int board_init(void) -{ - setup_soc_rev(); - - gd->bd->bi_arch_number = MACH_TYPE_MX51_3DS; /* board id for linux */ - /* address of boot parameters */ - gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; - - setup_uart(); - setup_nfc(); - setup_expio(); - return 0; -} - -#ifdef BOARD_LATE_INIT -int board_late_init(void) -{ - return 0; -} -#endif - -int checkboard(void) -{ - printf("Board: MX51 3STACK ["); - switch (__REG(SRC_BASE_ADDR + 0x8)) { - case 0x0001: - printf("POR"); - break; - case 0x0009: - printf("RST"); - break; - case 0x0010: - case 0x0011: - printf("WDOG"); - break; - default: - printf("unknown"); - } - printf("]\n"); - return 0; -} - void spi_io_init(struct imx_spi_dev_t *dev) { switch (dev->base) { @@ -242,13 +201,177 @@ void spi_io_init(struct imx_spi_dev_t *dev) } } +static void setup_fec(void) +{ + /*FEC_MDIO*/ + writel(0x3, IOMUXC_BASE_ADDR + 0x0D4); + writel(0x1FD, IOMUXC_BASE_ADDR + 0x0468); + writel(0x0, IOMUXC_BASE_ADDR + 0x0954); + + /*FEC_MDC*/ + writel(0x2, IOMUXC_BASE_ADDR + 0x13C); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0524); + + /* FEC RDATA[3] */ + writel(0x3, IOMUXC_BASE_ADDR + 0x0EC); + writel(0x180, IOMUXC_BASE_ADDR + 0x0480); + writel(0x0, IOMUXC_BASE_ADDR + 0x0964); + + /* FEC RDATA[2] */ + writel(0x3, IOMUXC_BASE_ADDR + 0x0E8); + writel(0x180, IOMUXC_BASE_ADDR + 0x047C); + writel(0x0, IOMUXC_BASE_ADDR + 0x0960); + + /* FEC RDATA[1] */ + writel(0x3, IOMUXC_BASE_ADDR + 0x0d8); + writel(0x180, IOMUXC_BASE_ADDR + 0x046C); + writel(0x0, IOMUXC_BASE_ADDR + 0x095C); + + /* FEC RDATA[0] */ + writel(0x2, IOMUXC_BASE_ADDR + 0x016C); + writel(0x2180, IOMUXC_BASE_ADDR + 0x0554); + writel(0x0, IOMUXC_BASE_ADDR + 0x0958); + + /* FEC TDATA[3] */ + writel(0x2, IOMUXC_BASE_ADDR + 0x148); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0530); + + /* FEC TDATA[2] */ + writel(0x2, IOMUXC_BASE_ADDR + 0x144); + writel(0x2004, IOMUXC_BASE_ADDR + 0x052C); + + /* FEC TDATA[1] */ + writel(0x2, IOMUXC_BASE_ADDR + 0x140); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0528); + + /* FEC TDATA[0] */ + writel(0x2, IOMUXC_BASE_ADDR + 0x0170); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0558); + + /* FEC TX_EN */ + writel(0x1, IOMUXC_BASE_ADDR + 0x014C); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0534); + + /* FEC TX_ER */ + writel(0x2, IOMUXC_BASE_ADDR + 0x0138); + writel(0x2004, IOMUXC_BASE_ADDR + 0x0520); + + /* FEC TX_CLK */ + writel(0x1, IOMUXC_BASE_ADDR + 0x0150); + writel(0x2180, IOMUXC_BASE_ADDR + 0x0538); + writel(0x0, IOMUXC_BASE_ADDR + 0x0974); + + /* FEC COL */ + writel(0x1, IOMUXC_BASE_ADDR + 0x0124); + writel(0x2180, IOMUXC_BASE_ADDR + 0x0500); + writel(0x0, IOMUXC_BASE_ADDR + 0x094c); + + /* FEC RX_CLK */ + writel(0x1, IOMUXC_BASE_ADDR + 0x0128); + writel(0x2180, IOMUXC_BASE_ADDR + 0x0504); + writel(0x0, IOMUXC_BASE_ADDR + 0x0968); + + /* FEC CRS */ + writel(0x3, IOMUXC_BASE_ADDR + 0x0f4); + writel(0x180, IOMUXC_BASE_ADDR + 0x0488); + writel(0x0, IOMUXC_BASE_ADDR + 0x0950); + + /* FEC RX_ER */ + writel(0x3, IOMUXC_BASE_ADDR + 0x0f0); + writel(0x180, IOMUXC_BASE_ADDR + 0x0484); + writel(0x0, IOMUXC_BASE_ADDR + 0x0970); + + /* FEC RX_DV */ + writel(0x2, IOMUXC_BASE_ADDR + 0x164); + writel(0x2180, IOMUXC_BASE_ADDR + 0x054C); + writel(0x0, IOMUXC_BASE_ADDR + 0x096C); +} + +static void power_init(void) +{ + struct spi_slave *slave; + unsigned int val; + unsigned int reg; + + slave = spi_pmic_probe(); + + /* power up the system first */ + pmic_reg(slave, 34, 0x00200000, 1); + + if (mxc_get_clock(MXC_FEC_CLK) > 800000000) { + /* Set core voltage to 1.175V */ + val = pmic_reg(slave, 24, 0, 0); + val = (val & (~0x1F)) | 0x17; + pmic_reg(slave, 24, val, 1); + } + + /* Setup VCC (SW2) to 1.225 */ + val = pmic_reg(slave, 25, 0, 0); + val = (val & (~0x1F)) | 0x19; + pmic_reg(slave, 25, val, 1); + + /* Setup 1V2_DIG1 (SW3) to 1.2 */ + val = pmic_reg(slave, 26, 0, 0); + val = (val & (~0x1F)) | 0x18; + pmic_reg(slave, 25, val, 1); + + /* Set VDIG to 1.65V, VGEN3 to 1.8V, VCAM to 2.5V */ + val = pmic_reg(slave, 30, 0, 0); + val &= ~0x34030; + val |= 0x10020; + pmic_reg(slave, 30, val, 1); + + /* Set VVIDEO to 2.775V, VAUDIO to 3V, VSD to 3.15V */ + val = pmic_reg(slave, 31, 0, 0); + val &= ~0x1FC; + val |= 0x1F4; + pmic_reg(slave, 31, val, 1); + + /* Configure VGEN3 and VCAM regulators to use external PNP */ + val = 0x208; + pmic_reg(slave, 33, val, 1); + udelay(200); + + reg = readl(GPIO2_BASE_ADDR + 0x0); + reg &= ~0x4000; /* Lower reset line */ + writel(reg, GPIO2_BASE_ADDR + 0x0); + + reg = readl(GPIO2_BASE_ADDR + 0x4); + reg |= 0x4000; /* configure GPIO lines as output */ + writel(reg, GPIO2_BASE_ADDR + 0x4); + + /* Reset the ethernet controller over GPIO */ + writel(0x1, IOMUXC_BASE_ADDR + 0x0AC); + + /* Enable VGEN3, VCAM, VAUDIO, VVIDEO, VSD regulators */ + val = 0x49249; + pmic_reg(slave, 33, val, 1); + + udelay(500); + + reg = readl(GPIO2_BASE_ADDR + 0x0); + reg |= 0x4000; + writel(reg, GPIO2_BASE_ADDR + 0x0); + + /* Setup the FEC after enabling the regulators */ + setup_fec(); + + spi_pmic_free(slave); +} + #ifdef CONFIG_NET_MULTI + +#if defined(CONFIG_DRIVER_SMC911X) +extern int smc911x_initialize(bd_t *bis); +#endif int board_eth_init(bd_t *bis) { int rc = -ENODEV; + #if defined(CONFIG_DRIVER_SMC911X) - rc = smc911x_initialize(bis); + rc = smc911x_initialize(bis); #endif + return rc; } #endif @@ -329,3 +452,47 @@ int sdhc_init(void) } #endif + +int board_init(void) +{ + setup_soc_rev(); + + gd->bd->bi_arch_number = MACH_TYPE_MX51_3DS; /* board id for linux */ + /* address of boot parameters */ + gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100; + + setup_uart(); + setup_nfc(); + setup_expio(); + return 0; +} + +#ifdef BOARD_LATE_INIT +int board_late_init(void) +{ + power_init(); + return 0; +} +#endif + +int checkboard(void) +{ + printf("Board: MX51 3STACK ["); + switch (__REG(SRC_BASE_ADDR + 0x8)) { + case 0x0001: + printf("POR"); + break; + case 0x0009: + printf("RST"); + break; + case 0x0010: + case 0x0011: + printf("WDOG"); + break; + default: + printf("unknown"); + } + printf("]\n"); + return 0; +} + -- cgit v1.1