From 1199ddce9c3e5dd25acffe7d7e7999ff779ac832 Mon Sep 17 00:00:00 2001 From: Christian Gmeiner Date: Thu, 23 Oct 2014 13:46:41 +0200 Subject: ot1200: add feature pads The older 'mr' variant and the generic variant of the OT1200 differ in some places. As the name suggests the generic variant supports more boot devices. In order to be compatible with the 'mr' variant we define some 'feature' GPIOs. On the 'mr' variant this pads are not connected so we define their state with the help of the internal pullups. On the generic variant this GPIOs are connected and represent the state of the hardware. Signed-off-by: Christian Gmeiner --- board/bachmann/ot1200/ot1200.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'board') diff --git a/board/bachmann/ot1200/ot1200.c b/board/bachmann/ot1200/ot1200.c index acf95cb..a2fb3cf 100644 --- a/board/bachmann/ot1200/ot1200.c +++ b/board/bachmann/ot1200/ot1200.c @@ -104,10 +104,25 @@ int board_spi_cs_gpio(unsigned bus, unsigned cs) return (bus == 2 && cs == 0) ? (IMX_GPIO_NR(1, 3)) : -1; } +static iomux_v3_cfg_t const feature_pads[] = { + /* SD card detect */ + MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(PAD_CTL_PUS_100K_DOWN), + + /* eMMC soldered? */ + MX6_PAD_GPIO_19__GPIO4_IO05 | MUX_PAD_CTRL(PAD_CTL_PUS_100K_UP), +}; + +static void setup_iomux_features(void) +{ + imx_iomux_v3_setup_multiple_pads(feature_pads, + ARRAY_SIZE(feature_pads)); +} + int board_early_init_f(void) { setup_iomux_uart(); setup_iomux_spi(); + setup_iomux_features(); return 0; } -- cgit v1.1