From 0d01520200f3bb0686567134bc2e7bb940009559 Mon Sep 17 00:00:00 2001 From: Heiko Schocher Date: Thu, 6 Jan 2011 10:25:26 +0100 Subject: keymile boards: add CONFIG_PIGGY_MAC_ADRESS_OFFSET Normaly the PIGGY_MAC_ADRESS can be read directly from the IVM on keymile boards. On mgcoge3 it differs. Because there are two piggy boards deployed the second MAC adress must be calculated with the IVM mac adress and an offset. This patch allows to set such a offset in the board config. Signed-off-by: Holger Brunck cc: Valentin Longchamp cc: Heiko Schocher --- board/keymile/common/common.c | 13 +++++++++++++ board/keymile/common/common.h | 4 ++++ 2 files changed, 17 insertions(+) (limited to 'board') diff --git a/board/keymile/common/common.c b/board/keymile/common/common.c index 6600e08..8392a64 100644 --- a/board/keymile/common/common.c +++ b/board/keymile/common/common.c @@ -228,8 +228,21 @@ static int ivm_analyze_block2(unsigned char *buf, int len) /* IVM_MacAddress */ sprintf((char *)valbuf, "%pM", buf); ivm_set_value("IVM_MacAddress", (char *)valbuf); + /* if an offset is defined, add it */ +#if defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) + if (CONFIG_PIGGY_MAC_ADRESS_OFFSET > 0) { + unsigned long val = (buf[4] << 16) + (buf[5] << 8) + buf[6]; + + val += CONFIG_PIGGY_MAC_ADRESS_OFFSET; + buf[4] = (val >> 16) & 0xff; + buf[5] = (val >> 8) & 0xff; + buf[6] = val & 0xff; + sprintf((char *)valbuf, "%pM", buf); + } +#endif if (getenv("ethaddr") == NULL) setenv((char *)"ethaddr", (char *)valbuf); + /* IVM_MacCount */ count = (buf[10] << 24) + (buf[11] << 16) + diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 8497ab6..e32de8d 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -39,6 +39,10 @@ struct km_bec_fpga { unsigned char pgy_eth; }; +#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) +#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0 +#endif + int ethernet_present(void); int ivm_read_eeprom(void); -- cgit v1.1