From 07ce4f0a2fee112bd3043d162b201abd65a52b6c Mon Sep 17 00:00:00 2001 From: Lily Zhang Date: Mon, 27 Dec 2010 14:39:14 +0800 Subject: ENGR00137372 MX53: Switch back to use DCD and update DDR scripts 1. This patch is used to switch back to use DCD for flash header instead of plug-in. This change request is due to the following reasons: 1) U-boot community doesn't accept current plug-in solution when upstreaming. 2) Plug-in isn't supported by MX53 ROM serial download mode. No effective workaround is found now. To use the same code base to support normal U-Boot and MFG tool better, adopt DCD solution firstly. 3) Current MX53 DDR scripts don't exceed the length limitation of DCD. For MX53 TO2.0 EVK/ARM2 board, raise DDR frequency to 400MHZ after VCC and VDDA voltages are raised as 1.3V. Since ARM2 CPU2 board share the same script with EVK, delete ARM2 CPU2 config files. ARM2 CPU2 board can share the same bootloader with EVK. 2. Update MX53 DDR2 scripts for TO1.0/TO2.0 EVK/ARD/ARM2 boards The script "MX53_TO2_DDR2_EVK_ARD.inc" is located under http://compass.freescale.net/livelink/livelink? func=ll&objId=221058910&objAction=browse&viewType=1 This script is published by ATX and FIL team on Dec 16th, 2010 3. Update MX53 ARM2 CPU3 DDR3 script "MX53_TO2_DDR3_CPU3.inc" under the same compass folder Signed-off-by: Lily Zhang --- board/freescale/mx53_rd/flash_header.S | 569 +++++++++----------------------- board/freescale/mx53_rd/lowlevel_init.S | 48 ++- board/freescale/mx53_rd/mx53_rd.c | 48 +-- 3 files changed, 221 insertions(+), 444 deletions(-) (limited to 'board') diff --git a/board/freescale/mx53_rd/flash_header.S b/board/freescale/mx53_rd/flash_header.S index c153934..8496789 100644 --- a/board/freescale/mx53_rd/flash_header.S +++ b/board/freescale/mx53_rd/flash_header.S @@ -25,427 +25,162 @@ # error "Must define the offset of flash header" #endif +#define CPU_2_BE_32(l) \ + ((((l) & 0x000000FF) << 24) | \ + (((l) & 0x0000FF00) << 8) | \ + (((l) & 0x00FF0000) >> 8) | \ + (((l) & 0xFF000000) >> 24)) + +#define MXC_DCD_ITEM(i, addr, val) \ +dcd_node_##i: \ + .word CPU_2_BE_32(addr) ; \ + .word CPU_2_BE_32(val) ; \ + .section ".text.flasheader", "x" b _start .org CONFIG_FLASH_HEADER_OFFSET - -ivt_header: .long 0x402000D1 /* Tag=0xD1, Len=0x0020, Ver=0x40 */ -app_code_jump_v: .long (0xF8006000 + (plugin_start - TEXT_BASE)) -reserv1: .long 0x0 -dcd_ptr: .long 0x0 -boot_data_ptr: .long (0xF8006000 + (boot_data - TEXT_BASE)) -self_ptr: .long (0xF8006000 + (ivt_header - TEXT_BASE)) -app_code_csf: .long 0x0 -reserv2: .long 0x0 -boot_data: .long 0xF8006000 -image_len: .long 2*1024 -plugin: .long 0x1 - -/* Second IVT to give entry point into the bootloader copied to DDR */ -ivt2_header: .long 0x402000D1 /*Tag=0xD1, Len=0x0020, Ver=0x40 */ -app2_code_jump_v: .long _start /* Entry point for the bootloader */ -reserv3: .long 0x0 -dcd2_ptr: .long 0x0 -boot_data2_ptr: .long boot_data2 -self_ptr2: .long ivt2_header -app_code_csf2: .long 0x0 -reserv4: .long 0x0 -boot_data2: .long TEXT_BASE -image_len2: .long _end - TEXT_BASE -plugin2: .long 0x0 - - -/* Here starts the plugin code */ -plugin_start: - /* Save the return address and the function arguments */ - push {r0-r3, lr} - - ldr r0, =ROM_SI_REV - ldr r1, [r0] - - cmp r1, #0x20 - -/* DDR2 script for EVK, ARD, and ARM2 CPU2 boards */ +ivt_header: .word 0x402000D1 /* Tag=0xD1, Len=0x0020, Ver=0x40 */ +app_code_jump_v: .word _start +reserv1: .word 0x0 +dcd_ptr: .word dcd_hdr +boot_data_ptr: .word boot_data +self_ptr: .word ivt_header +app_code_csf: .word 0x0 +reserv2: .word 0x0 + +boot_data: .word 0x77800000 +image_len: .word _end - TEXT_BASE +plugin: .word 0x0 + +/* TO1.0/TO2.0 DDR2 scripts for EVK, ARD and ARM2 CPU2 board */ #if !defined(CONFIG_MX53_ARM2_DDR3) - - /* IOMUX Setup */ - ldr r0, =0x53fa8500 - moveq r1, #0x00200000 - movne r1, #0x00380000 - add r2, r1, #0x40 - mov r3, #0x00280000 - mov r4, #0x00200000 - - str r1, [r0, #0x54] - str r1, [r0, #0x60] - str r1, [r0, #0x94] - str r1, [r0, #0x84] - str r2, [r0, #0x58] - str r2, [r0, #0x68] - str r2, [r0, #0x90] - str r2, [r0, #0x7c] - str r2, [r0, #0x64] - str r2, [r0, #0x80] - - streq r1, [r0, #0x70] -#if defined(CONFIG_MX53_EVK) - strne r4, [r0, #0x70] -#else - strne r1, [r0, #0x70] -#endif - str r3, [r0, #0x74] - streq r1, [r0, #0x78] -#if defined(CONFIG_MX53_EVK) - strne r4, [r0, #0x78] -#else - strne r1, [r0, #0x78] -#endif - str r3, [r0, #0x88] - - ldr r0, =0x53fa86f0 - str r3, [r0, #0x0] - mov r2, #0x00000200 - str r2, [r0, #0x4] - mov r2, #0x00000000 - str r2, [r0, #0xc] - - ldr r0, =0x53fa8700 - str r2, [r0, #0x14] - str r1, [r0, #0x18] - str r1, [r0, #0x1c] - str r3, [r0, #0x20] - - moveq r2, #0x02000000 - movne r2, #0x06000000 - - str r2, [r0, #0x24] - str r1, [r0, #0x28] - str r1, [r0, #0x2c] - - /* Initialize DDR2 memory - Hynix H5PS2G83AFR */ - ldr r0, =ESDCTL_BASE_ADDR - - ldreq r1, =0x34333936 - ldrne r1, =0x2b2f322f - - str r1, [r0, #0x088] - - ldreq r1, =0x49434942 - ldrne r1, =0x43403a3a - str r1, [r0, #0x090] - - /* add 3 logic unit of delay to sdclk */ - ldr r1, =0x00000f00 - strne r1, [r0, #0x098] - - ldr r1, =0x00000800 - str r1, [r0, #0x0F8] - - ldreq r1, =0x01350138 - ldrne r1, =0x020c0211 - - str r1, [r0, #0x07c] - - ldreq r1, =0x01380139 - ldrne r1, =0x0133014b - - str r1, [r0, #0x080] - - /* Enable bank interleaving, RALAT = 0x4, DDR2_EN = 1 */ - ldr r1, =0x00001710 - str r1, [r0, #0x018] - - ldr r1, =0xc4110000 - str r1, [r0, #0x00] - - ldr r1, =0x4d5122d2 - str r1, [r0, #0x0C] - - ldr r1, =0x92d18a22 - str r1, [r0, #0x10] - - ldr r1, =0x00c70092 - str r1, [r0, #0x14] - - ldr r1, =0x000026d2 - str r1, [r0, #0x2C] - - ldr r1, =0x009f000e - str r1, [r0, #0x30] - - ldr r1, =0x12272000 - str r1, [r0, #0x08] - - ldr r1, =0x00030012 - str r1, [r0, #0x04] - - ldr r1, =0x04008010 - str r1, [r0, #0x1C] - - ldr r1, =0x00008032 - str r1, [r0, #0x1C] - - ldr r1, =0x00008033 - str r1, [r0, #0x1C] - - ldr r1, =0x00008031 - str r1, [r0, #0x1C] - - ldr r1, =0x0b5280b0 - str r1, [r0, #0x1C] - - ldr r1, =0x04008010 - str r1, [r0, #0x1C] - - ldr r1, =0x00008020 - str r1, [r0, #0x1C] - - ldr r1, =0x00008020 - str r1, [r0, #0x1C] - - ldr r1, =0x0a528030 - str r1, [r0, #0x1C] - - ldr r1, =0x03c68031 - str r1, [r0, #0x1C] - - ldreq r1, =0x00448031 - ldrne r1, =0x00468031 - str r1, [r0, #0x1C] - - /* Even though Rev B does not have DDR on CSD1, keep these - * mode register initialization sequences for future uses since - * it does not hurt to keep them - */ - ldr r1, =0x04008018 - str r1, [r0, #0x1C] - - ldr r1, =0x0000803a - str r1, [r0, #0x1C] - - ldr r1, =0x0000803b - str r1, [r0, #0x1C] - - ldr r1, =0x00008039 - str r1, [r0, #0x1C] - - ldr r1, =0x0b528138 - str r1, [r0, #0x1C] - - ldr r1, =0x04008018 - str r1, [r0, #0x1C] - - ldr r1, =0x00008028 - str r1, [r0, #0x1C] - - ldr r1, =0x00008028 - str r1, [r0, #0x1C] - - ldr r1, =0x0a528038 - str r1, [r0, #0x1C] - - ldr r1, =0x03c68039 - str r1, [r0, #0x1C] - - ldreq r1, =0x00448039 - ldrne r1, =0x00468039 - str r1, [r0, #0x1C] - - ldr r1, =0x00005800 - str r1, [r0, #0x20] - - /* Enable 50ohm ODT for TO2*/ - ldreq r1, =0x00033335 - ldrne r1, =0x00033337 - str r1, [r0, #0x58] - - ldr r1, =0x00000000 - str r1, [r0, #0x1C] - -/* Enable ZQ calibration for TO2 */ - ldr r1, =0x04b80003 - streq r1, [r0, #0x40] - -/* For TO2 only, set LDO to 1.3V */ - ldr r0, =0x53fa8000 - ldr r1, =0x00194005 - streq r1, [r0, #0x04] - -/* DDR3 script for SMD and ARM2 CPU3 board */ -#else - - /* IOMUX Setup */ - ldr r0, =0x53fa8500 - mov r1, #0x00300000 - add r2, r1, #0x40 - - str r1, [r0, #0x54] - str r2, [r0, #0x58] - str r1, [r0, #0x60] - str r2, [r0, #0x64] - str r2, [r0, #0x68] - - str r1, [r0, #0x70] - str r1, [r0, #0x74] - str r1, [r0, #0x78] - str r2, [r0, #0x7c] - str r2, [r0, #0x80] - str r1, [r0, #0x84] - str r1, [r0, #0x88] - str r2, [r0, #0x90] - str r1, [r0, #0x94] - - ldr r0, =0x53fa86f0 - str r1, [r0, #0x0] - mov r2, #0x00000000 - str r2, [r0, #0x4] - str r2, [r0, #0xc] - - ldr r0, =0x53fa8700 - str r2, [r0, #0x14] - str r1, [r0, #0x18] - str r1, [r0, #0x1c] - str r1, [r0, #0x20] - - mov r2, #0x04000000 - str r2, [r0, #0x24] - str r1, [r0, #0x28] - str r1, [r0, #0x2c] - - /* Initialize DDR3 memory */ - ldr r0, =ESDCTL_BASE_ADDR - - ldr r1, =0x32383535 - str r1, [r0, #0x088] - - ldr r1, =0x40383538 - str r1, [r0, #0x090] - - ldr r1, =0x0136014d - str r1, [r0, #0x07c] - - ldr r1, =0x01510141 - str r1, [r0, #0x080] - - ldr r1, =0x00091740 - str r1, [r0, #0x018] - - ldr r1, =0xc4190000 - str r1, [r0, #0x00] - - ldr r1, =0x565a7543 - str r1, [r0, #0x0C] - - ldr r1, =0xb6ae8aa3 - str r1, [r0, #0x10] - - ldr r1, =0x01ff00db - str r1, [r0, #0x14] - - ldr r1, =0x000026d2 - str r1, [r0, #0x2C] - - ldr r1, =0x009f0e21 - str r1, [r0, #0x30] - - ldr r1, =0x12272000 - str r1, [r0, #0x08] - - ldr r1, =0x00030012 - str r1, [r0, #0x04] - - ldr r1, =0x00008032 - str r1, [r0, #0x1C] - - ldr r1, =0x00008033 - str r1, [r0, #0x1C] - - ldr r1, =0x00028031 - str r1, [r0, #0x1C] - - ldr r1, =0x092080b0 - str r1, [r0, #0x1C] - - ldr r1, =0x04008040 - str r1, [r0, #0x1C] - - ldr r1, =0x0000803a - str r1, [r0, #0x1C] - - ldr r1, =0x0000803b - str r1, [r0, #0x1C] - - ldr r1, =0x00028039 - str r1, [r0, #0x1C] - - ldr r1, =0x09208138 - str r1, [r0, #0x1C] - - ldr r1, =0x04008048 - str r1, [r0, #0x1C] - - ldr r1, =0x00001800 - str r1, [r0, #0x20] - - ldr r1, =0x04b80003 - str r1, [r0, #0x40] - - ldr r1, =0x00022227 - str r1, [r0, #0x58] - - ldr r1, =0x00000000 - str r1, [r0, #0x1C] +dcd_hdr: .word 0x400802D2 /* Tag=0xD2, Len=64*8 + 4 + 4, Ver=0x40 */ +write_dcd_cmd: .word 0x040402CC /* Tag=0xCC, Len=64*8 + 4, Param=4 */ + +/* DCD */ +MXC_DCD_ITEM(1, IOMUXC_BASE_ADDR + 0x554, 0x00200000) +MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x560, 0x00200000) +MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x594, 0x00200000) +MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x584, 0x00200000) +MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x558, 0x00200040) +MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x568, 0x00200040) +MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x590, 0x00200040) +MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x57c, 0x00200040) +MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x564, 0x00200040) +MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x580, 0x00200040) +MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x570, 0x00200000) +MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x578, 0x00200000) +MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x72c, 0x00200000) +MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x728, 0x00200000) +MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x71c, 0x00200000) +MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x718, 0x00200000) +MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x574, 0x00280000) +MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x588, 0x00280000) +MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x6f0, 0x00280000) +MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x720, 0x00280000) +MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x6fc, 0x00000000) +MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x6f4, 0x00000200) +MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x714, 0x00000000) +MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x724, 0x06000000) +MXC_DCD_ITEM(25, ESDCTL_BASE_ADDR + 0x088, 0x34333936) +MXC_DCD_ITEM(26, ESDCTL_BASE_ADDR + 0x090, 0x49434942) +MXC_DCD_ITEM(27, ESDCTL_BASE_ADDR + 0x0f8, 0x00000800) +MXC_DCD_ITEM(28, ESDCTL_BASE_ADDR + 0x07c, 0x01350138) +MXC_DCD_ITEM(29, ESDCTL_BASE_ADDR + 0x080, 0x01380139) +MXC_DCD_ITEM(30, ESDCTL_BASE_ADDR + 0x018, 0x00001710) +MXC_DCD_ITEM(31, ESDCTL_BASE_ADDR + 0x000, 0xc4110000) +MXC_DCD_ITEM(32, ESDCTL_BASE_ADDR + 0x00c, 0x4d5122d2) +MXC_DCD_ITEM(33, ESDCTL_BASE_ADDR + 0x010, 0x92d18a22) +MXC_DCD_ITEM(34, ESDCTL_BASE_ADDR + 0x014, 0x00c70092) +MXC_DCD_ITEM(35, ESDCTL_BASE_ADDR + 0x02c, 0x000026d2) +MXC_DCD_ITEM(36, ESDCTL_BASE_ADDR + 0x030, 0x009f000e) +MXC_DCD_ITEM(37, ESDCTL_BASE_ADDR + 0x008, 0x12272000) +MXC_DCD_ITEM(38, ESDCTL_BASE_ADDR + 0x004, 0x00030012) +MXC_DCD_ITEM(39, ESDCTL_BASE_ADDR + 0x01c, 0x04008010) +MXC_DCD_ITEM(40, ESDCTL_BASE_ADDR + 0x01c, 0x00008032) +MXC_DCD_ITEM(41, ESDCTL_BASE_ADDR + 0x01c, 0x00008033) +MXC_DCD_ITEM(42, ESDCTL_BASE_ADDR + 0x01c, 0x00008031) +MXC_DCD_ITEM(43, ESDCTL_BASE_ADDR + 0x01c, 0x0b5280b0) +MXC_DCD_ITEM(44, ESDCTL_BASE_ADDR + 0x01c, 0x04008010) +MXC_DCD_ITEM(45, ESDCTL_BASE_ADDR + 0x01c, 0x00008020) +MXC_DCD_ITEM(46, ESDCTL_BASE_ADDR + 0x01c, 0x00008020) +MXC_DCD_ITEM(47, ESDCTL_BASE_ADDR + 0x01c, 0x0a528030) +MXC_DCD_ITEM(48, ESDCTL_BASE_ADDR + 0x01c, 0x03c68031) +MXC_DCD_ITEM(49, ESDCTL_BASE_ADDR + 0x01c, 0x00448031) +MXC_DCD_ITEM(50, ESDCTL_BASE_ADDR + 0x01c, 0x04008018) +MXC_DCD_ITEM(51, ESDCTL_BASE_ADDR + 0x01c, 0x0000803a) +MXC_DCD_ITEM(52, ESDCTL_BASE_ADDR + 0x01c, 0x0000803b) +MXC_DCD_ITEM(53, ESDCTL_BASE_ADDR + 0x01c, 0x00008039) +MXC_DCD_ITEM(54, ESDCTL_BASE_ADDR + 0x01c, 0x0b528138) +MXC_DCD_ITEM(55, ESDCTL_BASE_ADDR + 0x01c, 0x04008018) +MXC_DCD_ITEM(56, ESDCTL_BASE_ADDR + 0x01c, 0x00008028) +MXC_DCD_ITEM(57, ESDCTL_BASE_ADDR + 0x01c, 0x00008028) +MXC_DCD_ITEM(58, ESDCTL_BASE_ADDR + 0x01c, 0x0a528038) +MXC_DCD_ITEM(59, ESDCTL_BASE_ADDR + 0x01c, 0x03c68039) +MXC_DCD_ITEM(60, ESDCTL_BASE_ADDR + 0x01c, 0x00448039) +MXC_DCD_ITEM(61, ESDCTL_BASE_ADDR + 0x020, 0x00005800) +MXC_DCD_ITEM(62, ESDCTL_BASE_ADDR + 0x058, 0x00033335) +MXC_DCD_ITEM(63, ESDCTL_BASE_ADDR + 0x01c, 0x00000000) +MXC_DCD_ITEM(64, ESDCTL_BASE_ADDR + 0x040, 0x04b80003) + + +#elif defined(CONFIG_MX53_ARM2_DDR3) +dcd_hdr: .word 0x40A801D2 /* Tag=0xD2, Len=52*8 + 4 + 4, Ver=0x40 */ +write_dcd_cmd: .word 0x04A401CC /* Tag=0xCC, Len=52*8 + 4, Param=4 */ + +/* DCD */ +MXC_DCD_ITEM(1, IOMUXC_BASE_ADDR + 0x554, 0x00300000) +MXC_DCD_ITEM(2, IOMUXC_BASE_ADDR + 0x560, 0x00300000) +MXC_DCD_ITEM(3, IOMUXC_BASE_ADDR + 0x594, 0x00300000) +MXC_DCD_ITEM(4, IOMUXC_BASE_ADDR + 0x584, 0x00300000) +MXC_DCD_ITEM(5, IOMUXC_BASE_ADDR + 0x558, 0x00300040) +MXC_DCD_ITEM(6, IOMUXC_BASE_ADDR + 0x568, 0x00300040) +MXC_DCD_ITEM(7, IOMUXC_BASE_ADDR + 0x590, 0x00300040) +MXC_DCD_ITEM(8, IOMUXC_BASE_ADDR + 0x57c, 0x00300040) +MXC_DCD_ITEM(9, IOMUXC_BASE_ADDR + 0x564, 0x00300040) +MXC_DCD_ITEM(10, IOMUXC_BASE_ADDR + 0x580, 0x00300040) +MXC_DCD_ITEM(11, IOMUXC_BASE_ADDR + 0x570, 0x00300000) +MXC_DCD_ITEM(12, IOMUXC_BASE_ADDR + 0x578, 0x00300000) +MXC_DCD_ITEM(13, IOMUXC_BASE_ADDR + 0x72c, 0x00300000) +MXC_DCD_ITEM(14, IOMUXC_BASE_ADDR + 0x728, 0x00300000) +MXC_DCD_ITEM(15, IOMUXC_BASE_ADDR + 0x71c, 0x00300000) +MXC_DCD_ITEM(16, IOMUXC_BASE_ADDR + 0x718, 0x00300000) +MXC_DCD_ITEM(17, IOMUXC_BASE_ADDR + 0x574, 0x00300000) +MXC_DCD_ITEM(18, IOMUXC_BASE_ADDR + 0x588, 0x00300000) +MXC_DCD_ITEM(19, IOMUXC_BASE_ADDR + 0x6f0, 0x00300000) +MXC_DCD_ITEM(20, IOMUXC_BASE_ADDR + 0x720, 0x00300000) +MXC_DCD_ITEM(21, IOMUXC_BASE_ADDR + 0x6fc, 0x00000000) +MXC_DCD_ITEM(22, IOMUXC_BASE_ADDR + 0x6f4, 0x00000200) +MXC_DCD_ITEM(23, IOMUXC_BASE_ADDR + 0x714, 0x00000000) +MXC_DCD_ITEM(24, IOMUXC_BASE_ADDR + 0x724, 0x00000000) +MXC_DCD_ITEM(25, ESDCTL_BASE_ADDR + 0x098, 0x00000a00) +MXC_DCD_ITEM(26, ESDCTL_BASE_ADDR + 0x088, 0x32383535) +MXC_DCD_ITEM(27, ESDCTL_BASE_ADDR + 0x090, 0x40383538) +MXC_DCD_ITEM(28, ESDCTL_BASE_ADDR + 0x07c, 0x0136014d) +MXC_DCD_ITEM(29, ESDCTL_BASE_ADDR + 0x080, 0x01510141) +MXC_DCD_ITEM(30, ESDCTL_BASE_ADDR + 0x018, 0x00091740) +MXC_DCD_ITEM(31, ESDCTL_BASE_ADDR + 0x000, 0xc4190000) +MXC_DCD_ITEM(32, ESDCTL_BASE_ADDR + 0x00C, 0x565a7543) +MXC_DCD_ITEM(33, ESDCTL_BASE_ADDR + 0x010, 0xb6ae8aa3) +MXC_DCD_ITEM(34, ESDCTL_BASE_ADDR + 0x014, 0x01ff00db) +MXC_DCD_ITEM(35, ESDCTL_BASE_ADDR + 0x02c, 0x000026d2) +MXC_DCD_ITEM(36, ESDCTL_BASE_ADDR + 0x030, 0x009f0e21) +MXC_DCD_ITEM(37, ESDCTL_BASE_ADDR + 0x008, 0x12272000) +MXC_DCD_ITEM(38, ESDCTL_BASE_ADDR + 0x004, 0x00030012) +MXC_DCD_ITEM(39, ESDCTL_BASE_ADDR + 0x01c, 0x02008032) +MXC_DCD_ITEM(40, ESDCTL_BASE_ADDR + 0x01c, 0x00008033) +MXC_DCD_ITEM(41, ESDCTL_BASE_ADDR + 0x01c, 0x00428031) +MXC_DCD_ITEM(42, ESDCTL_BASE_ADDR + 0x01c, 0x092080b0) +MXC_DCD_ITEM(43, ESDCTL_BASE_ADDR + 0x01c, 0x04008040) +MXC_DCD_ITEM(44, ESDCTL_BASE_ADDR + 0x01c, 0x0200803a) +MXC_DCD_ITEM(45, ESDCTL_BASE_ADDR + 0x01c, 0x0000803b) +MXC_DCD_ITEM(46, ESDCTL_BASE_ADDR + 0x01c, 0x00428039) +MXC_DCD_ITEM(47, ESDCTL_BASE_ADDR + 0x01c, 0x09208138) +MXC_DCD_ITEM(48, ESDCTL_BASE_ADDR + 0x01c, 0x04008048) +MXC_DCD_ITEM(49, ESDCTL_BASE_ADDR + 0x020, 0x00001800) +MXC_DCD_ITEM(50, ESDCTL_BASE_ADDR + 0x040, 0x04b80003) +MXC_DCD_ITEM(51, ESDCTL_BASE_ADDR + 0x058, 0x00002225) +MXC_DCD_ITEM(52, ESDCTL_BASE_ADDR + 0x01c, 0x00000000) #endif - -/* - * The following is to fill in those arguments for this ROM function - * pu_irom_hwcnfg_setup(void **start, size_t *bytes, const void *boot_data) - * - * This function is used to copy data from the storage media into DDR. - * - * start - Initial (possibly partial) image load address on entry. Final image - * load address on exit. - * bytes - Initial (possibly partial) image size on entry. Final image size on - * exit. - * boot_data - Initial @ref ivt Boot Data load address. - */ - adr r0, DDR_DEST_ADDR - adr r1, COPY_SIZE - adr r2, BOOT_DATA -before_calling_rom___pu_irom_hwcnfg_setup: - - /* Different ROM address for TO 1.0 & TO 2.0 */ - moveq r4, #0x1800 - addeq r4, r4, #0x4d - beq 2f - mov r4, #0x400000 - add r4, r4, #0x5000 - add r4, r4, #0xc7 - -2: blx r4 /* This address might change in future ROM versions */ -after_calling_rom___pu_irom_hwcnfg_setup: - -/* To return to ROM from plugin, we need to fill in these argument. - * Here is what need to do: - * Need to construct the paramters for this function before return to ROM: - * plugin_download(void **start, size_t *bytes, UINT32 *ivt_offset) - */ - pop {r0-r3, lr} - ldr r4, DDR_DEST_ADDR - str r4, [r0] - ldr r4, COPY_SIZE - str r4, [r1] - mov r4, #0x400 /* Point to the second IVT table at offset 0x42C */ - add r4, r4, #0x2C - str r4, [r2] - mov r0, #1 - - bx lr /* return back to ROM code */ - -DDR_DEST_ADDR: .word TEXT_BASE -COPY_SIZE: .word _end - TEXT_BASE -BOOT_DATA: .word TEXT_BASE - .word _end - TEXT_BASE - .word 0 #endif diff --git a/board/freescale/mx53_rd/lowlevel_init.S b/board/freescale/mx53_rd/lowlevel_init.S index dbf344c..4c5d78d 100644 --- a/board/freescale/mx53_rd/lowlevel_init.S +++ b/board/freescale/mx53_rd/lowlevel_init.S @@ -84,6 +84,15 @@ .endm .macro init_clock + ldr r0, =ROM_SI_REV + ldr r1, [r0] + cmp r1, #0x20 + + /* For TO2 only, set LDO to 1.3V */ + ldr r0, =0x53fa8000 + ldr r1, =0x00194005 + streq r1, [r0, #0x04] + ldr r0, CCM_BASE_ADDR_W /* Switch ARM to step clock */ @@ -92,10 +101,37 @@ setup_pll PLL1_BASE_ADDR, 800 - /* Allow PLL2/DDR to remain at 333 MHz as setup by ROM (must set - * BOOT_CFG2[4]=1). VCC and VDDA need to be boosted before DDR - * is run at 400 MHz. - */ + setup_pll PLL3_BASE_ADDR, 400 + + /* Switch peripheral to PLL3 */ + ldr r0, CCM_BASE_ADDR_W + ldr r1, CCM_VAL_0x00015154 + str r1, [r0, #CLKCTL_CBCMR] + ldr r1, CCM_VAL_0x02888945 + orr r1, r1, #(1 << 16) + str r1, [r0, #CLKCTL_CBCDR] + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b + + setup_pll PLL2_BASE_ADDR, CONFIG_SYS_PLL2_FREQ + + /* Switch peripheral to PLL2 */ + ldr r0, CCM_BASE_ADDR_W + ldr r1, CCM_VAL_0x00808145 + orr r1, r1, #(CONFIG_SYS_AHB_PODF << 10) + orr r1, r1, #(CONFIG_SYS_AXIA_PODF << 16) + orr r1, r1, #(CONFIG_SYS_AXIB_PODF << 19) + str r1, [r0, #CLKCTL_CBCDR] + + ldr r1, CCM_VAL_0x00016154 + str r1, [r0, #CLKCTL_CBCMR] + + /* make sure change is effective */ +1: ldr r1, [r0, #CLKCTL_CDHIPR] + cmp r1, #0x0 + bne 1b setup_pll PLL3_BASE_ADDR, 216 @@ -172,6 +208,10 @@ lowlevel_init: /* Board level setting value */ CCM_BASE_ADDR_W: .word CCM_BASE_ADDR +CCM_VAL_0x00016154: .word 0x00016154 +CCM_VAL_0x00808145: .word 0x00808145 +CCM_VAL_0x00015154: .word 0x00015154 +CCM_VAL_0x02888945: .word 0x02888945 W_DP_OP_800: .word DP_OP_800 W_DP_MFD_800: .word DP_MFD_800 W_DP_MFN_800: .word DP_MFN_800 diff --git a/board/freescale/mx53_rd/mx53_rd.c b/board/freescale/mx53_rd/mx53_rd.c index 5baa5d0..061b65b 100644 --- a/board/freescale/mx53_rd/mx53_rd.c +++ b/board/freescale/mx53_rd/mx53_rd.c @@ -358,12 +358,14 @@ void setup_core_voltages(void) if (i2c_write(0x8, 24, 1, buf, 3)) return; - /* Set DDR voltage VDDA to 1.25V */ - buf[0] = 0; - buf[1] = 0; - buf[2] = 0x1a; - if (i2c_write(0x8, 26, 1, buf, 3)) - return; + if (is_soc_rev(CHIP_REV_1_0) == 0) { + /* Set DDR voltage VDDA to 1.25V */ + buf[0] = 0; + buf[1] = 0; + buf[2] = 0x1a; + if (i2c_write(0x8, 26, 1, buf, 3)) + return; + } if (is_soc_rev(CHIP_REV_2_0) == 0) { /* Set VCC to 1.3V for TO2 */ @@ -388,7 +390,7 @@ void setup_core_voltages(void) writel(0x0, CCM_BASE_ADDR + CLKCTL_CACRR); } -#ifdef CONFIG_MX53_EVK +#if defined(CONFIG_MX53_EVK) || defined(CONFIG_MX53_ARM2_DDR3) static int __read_adc_channel(unsigned int chan) { unsigned char buf[4] = { 0 }; @@ -512,9 +514,10 @@ static int __print_board_info(int id0, int id1) } break; + default: printf("Unkown board id0:%d\n", id0); - + ret = -1; break; } @@ -539,6 +542,14 @@ static int _identify_board_fix_up(int id0, int id1) /* set up rev #2 for EVK RevB board */ setup_board_rev(2); } + + /* For ARM2 board */ + if (id0 == -1) { + if (clk_config(CONFIG_REF_CLK_FREQ, 400, PERIPH_CLK) >= 0) + clk_config(CONFIG_REF_CLK_FREQ, 400, DDR_CLK); + setup_board_rev(1); + } + #endif return ret; } @@ -568,8 +579,11 @@ int identify_board_id(void) return ret; ret = __print_board_info(bd_id0, bd_id1); - if (ret < 0) - return ret; + if (ret < 0) { + /* Treat it as ARM2 board if it's not recognized */ + printf("Treat it as MX53 ARM2 board\n"); + bd_id0 = -1; + } ret = _identify_board_fix_up(bd_id0, bd_id1); @@ -1255,9 +1269,6 @@ int board_init(void) #endif setup_boot_device(); setup_soc_rev(); -#if defined(CONFIG_MX53_ARM2) || defined(CONFIG_MX53_ARM2_DDR3) - setup_board_rev(1); -#endif #if defined(CONFIG_MX53_ARD) gd->bd->bi_arch_number = MACH_TYPE_MX53_ARD; @@ -1419,19 +1430,10 @@ int checkboard(void) { printf("Board: "); -/* On EVK, DDR frequency will be bumped up to 400 MHz in identify_board_id() */ -#if !defined(CONFIG_MX53_EVK) - /* Bump up the DDR frequency to 400 MHz */ - if (clk_config(CONFIG_REF_CLK_FREQ, 400, PERIPH_CLK) >= 0) - clk_config(CONFIG_REF_CLK_FREQ, 400, DDR_CLK); -#endif - #if defined(CONFIG_MX53_ARD) printf("MX53-ARD 1.0 ["); -#elif defined(CONFIG_MX53_ARM2) || defined(CONFIG_MX53_ARM2_DDR3) - printf("Board: MX53 ARMADILLO2 "); printf("1.0 ["); -#elif defined(CONFIG_MX53_EVK) +#elif defined(CONFIG_MX53_EVK) || defined(CONFIG_MX53_ARM2_DDR3) #ifdef CONFIG_I2C_MXC identify_board_id(); -- cgit v1.1