From ba56f625767d058b0e05a22729de13be5e0f6334 Mon Sep 17 00:00:00 2001 From: wdenk Date: Fri, 6 Feb 2004 23:19:44 +0000 Subject: Patch by Travis Sawyer, 30 Dec 2003: Add support for IBM PPC440GX. Multiple EMAC Ethernet devices, select MDI port based on enabled EMAC device. Add support for XES Inc XPedite1000 440GX base PrPMC board. --- board/xpedite1k/xpedite1k.c | 358 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 358 insertions(+) create mode 100644 board/xpedite1k/xpedite1k.c (limited to 'board/xpedite1k/xpedite1k.c') diff --git a/board/xpedite1k/xpedite1k.c b/board/xpedite1k/xpedite1k.c new file mode 100644 index 0000000..c025c85 --- /dev/null +++ b/board/xpedite1k/xpedite1k.c @@ -0,0 +1,358 @@ +/* + * Copyright (C) 2003 Travis B. Sawyer + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + +#include +#include +#include +#include + +#define BOOT_SMALL_FLASH 32 /* 00100000 */ +#define FLASH_ONBD_N 2 /* 00000010 */ +#define FLASH_SRAM_SEL 1 /* 00000001 */ + +long int fixed_sdram (void); + +int board_pre_init (void) +{ + unsigned long sdrreg; + /* TBS: Setup the GPIO access for the user LEDs */ + mfsdr(sdr_pfc0, sdrreg); + mtsdr(sdr_pfc0, (sdrreg & ~0x00000100) | 0x00000E00); + out32(CFG_GPIO_BASE + 0x018, (USR_LED0 | USR_LED1 | USR_LED2 | USR_LED3)); + LED0_OFF(); + LED1_OFF(); + LED2_OFF(); + LED3_OFF(); + + /*-------------------------------------------------------------------- + * Setup the external bus controller/chip selects + *-------------------------------------------------------------------*/ + + /* set the bus controller */ + mtebc (pb0ap, 0x04055200); /* FLASH/SRAM */ + mtebc (pb0cr, 0xfff18000); /* BAS=0xfff 1MB R/W 8-bit */ + + /*-------------------------------------------------------------------- + * Setup the interrupt controller polarities, triggers, etc. + *-------------------------------------------------------------------*/ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + mtdcr (uic0er, 0x00000000); /* disable all */ + mtdcr (uic0cr, 0x00000003); /* SMI & UIC1 crit are critical */ + mtdcr (uic0pr, 0xfffffe00); /* per ref-board manual */ + mtdcr (uic0tr, 0x01c00000); /* per ref-board manual */ + mtdcr (uic0vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic0sr, 0xffffffff); /* clear all */ + + mtdcr (uic1sr, 0xffffffff); /* clear all */ + mtdcr (uic1er, 0x00000000); /* disable all */ + mtdcr (uic1cr, 0x00000000); /* all non-critical */ + mtdcr (uic1pr, 0xffffc0ff); /* per ref-board manual */ + mtdcr (uic1tr, 0x00ff8000); /* per ref-board manual */ + mtdcr (uic1vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic1sr, 0xffffffff); /* clear all */ + + mtdcr (uic2sr, 0xffffffff); /* clear all */ + mtdcr (uic2er, 0x00000000); /* disable all */ + mtdcr (uic2cr, 0x00000000); /* all non-critical */ + mtdcr (uic2pr, 0xffffffff); /* per ref-board manual */ + mtdcr (uic2tr, 0x00ff8c0f); /* per ref-board manual */ + mtdcr (uic2vr, 0x00000001); /* int31 highest, base=0x000 */ + mtdcr (uic2sr, 0xffffffff); /* clear all */ + + mtdcr (uicb0sr, 0xfc000000); /* clear all */ + mtdcr (uicb0er, 0x00000000); /* disable all */ + mtdcr (uicb0cr, 0x00000000); /* all non-critical */ + mtdcr (uicb0pr, 0xfc000000); /* */ + mtdcr (uicb0tr, 0x00000000); /* */ + mtdcr (uicb0vr, 0x00000001); /* */ + + LED0_ON(); + + + return 0; +} + +int checkboard (void) +{ + sys_info_t sysinfo; + get_sys_info (&sysinfo); + + printf ("Board: XES XPedite1000 440GX\n"); + printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000); + printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000); + printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000); + printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000); + printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000); + + return (0); +} + + +long int initdram (int board_type) +{ + long dram_size = 0; + +#if defined(CONFIG_SPD_EEPROM) + dram_size = spd_sdram (0); +#else + dram_size = fixed_sdram (); +#endif + return dram_size; +} + + +#if defined(CFG_DRAM_TEST) +int testdram (void) +{ + uint *pstart = (uint *) 0x00000000; + uint *pend = (uint *) 0x08000000; + uint *p; + + for (p = pstart; p < pend; p++) + *p = 0xaaaaaaaa; + + for (p = pstart; p < pend; p++) { + if (*p != 0xaaaaaaaa) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + + for (p = pstart; p < pend; p++) + *p = 0x55555555; + + for (p = pstart; p < pend; p++) { + if (*p != 0x55555555) { + printf ("SDRAM test fails at: %08x\n", (uint) p); + return 1; + } + } + return 0; +} +#endif + +#if !defined(CONFIG_SPD_EEPROM) +/************************************************************************* + * fixed sdram init -- doesn't use serial presence detect. + * + * Assumes: 128 MB, non-ECC, non-registered + * PLB @ 133 MHz + * + ************************************************************************/ +long int fixed_sdram (void) +{ + uint reg; + + /*-------------------------------------------------------------------- + * Setup some default + *------------------------------------------------------------------*/ + mtsdram (mem_uabba, 0x00000000); /* ubba=0 (default) */ + mtsdram (mem_slio, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ + mtsdram (mem_devopt, 0x00000000); /* dll=0 ds=0 (normal) */ + mtsdram (mem_wddctr, 0x00000000); /* wrcp=0 dcd=0 */ + mtsdram (mem_clktr, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ + + /*-------------------------------------------------------------------- + * Setup for board-specific specific mem + *------------------------------------------------------------------*/ + /* + * Following for CAS Latency = 2.5 @ 133 MHz PLB + */ + mtsdram (mem_b0cr, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ + mtsdram (mem_tr0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ + /* RA=10 RD=3 */ + mtsdram (mem_tr1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ + mtsdram (mem_rtr, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ + mtsdram (mem_cfg1, 0x00000000); /* Self-refresh exit, disable PM */ + udelay (400); /* Delay 200 usecs (min) */ + + /*-------------------------------------------------------------------- + * Enable the controller, then wait for DCEN to complete + *------------------------------------------------------------------*/ + mtsdram (mem_cfg0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ + for (;;) { + mfsdram (mem_mcsts, reg); + if (reg & 0x80000000) + break; + } + + return (128 * 1024 * 1024); /* 128 MB */ +} +#endif /* !defined(CONFIG_SPD_EEPROM) */ + + +/************************************************************************* + * pci_pre_init + * + * This routine is called just prior to registering the hose and gives + * the board the opportunity to check things. Returning a value of zero + * indicates that things are bad & PCI initialization should be aborted. + * + * Different boards may wish to customize the pci controller structure + * (add regions, override default access routines, etc) or perform + * certain pre-initialization actions. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) +int pci_pre_init(struct pci_controller * hose ) +{ + unsigned long strap; + + /*--------------------------------------------------------------------------+ + * TBS: + * The xpedite1k is a PrPMC board, however for our purposes it is the host + *--------------------------------------------------------------------------*/ + strap = mfdcr(cpc0_strp1); + if( (strap & 0x00100000) == 0 ){ + printf("PCI: CPC0_STRP1[PAE] not set.\n"); + return 0; + } + + return 1; +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */ + +/************************************************************************* + * pci_target_init + * + * The bootstrap configuration provides default settings for the pci + * inbound map (PIM). But the bootstrap config choices are limited and + * may not be sufficient for a given board. + * + ************************************************************************/ +#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) +void pci_target_init(struct pci_controller * hose ) +{ + DECLARE_GLOBAL_DATA_PTR; + + /*--------------------------------------------------------------------------+ + * Disable everything + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0SA, 0 ); /* disable */ + out32r( PCIX0_PIM1SA, 0 ); /* disable */ + out32r( PCIX0_PIM2SA, 0 ); /* disable */ + out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + + /*--------------------------------------------------------------------------+ + * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping + * options to not support sizes such as 128/256 MB. + *--------------------------------------------------------------------------*/ + out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE ); + out32r( PCIX0_PIM0LAH, 0 ); + out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + + out32r( PCIX0_BAR0, 0 ); + + /*--------------------------------------------------------------------------+ + * Program the board's subsystem id/vendor id + *--------------------------------------------------------------------------*/ + out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID ); + out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID ); + + out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); +} +#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */ + + +/************************************************************************* + * is_pci_host + * + * This routine is called to determine if a pci scan should be + * performed. With various hardware environments (especially cPCI and + * PPMC) it's insufficient to depend on the state of the arbiter enable + * bit in the strap register, or generic host/adapter assumptions. + * + * Rather than hard-code a bad assumption in the general 440 code, the + * 440 pci code requires the board to decide at runtime. + * + * Return 0 for adapter mode, non-zero for host (monarch) mode. + * + * + ************************************************************************/ +#if defined(CONFIG_PCI) +int is_pci_host(struct pci_controller *hose) +{ + /* The ebony board is always configured as host. */ + /* TBS: The xpedite1k is not necessarily the host, however for our purposes, it is. */ + return(1); +} +#endif /* defined(CONFIG_PCI) */ + +#ifdef CONFIG_POST +/* + * Returns 1 if keys pressed to start the power-on long-running tests + * Called from board_init_f(). + */ +int post_hotkeys_pressed(void) +{ + + return (ctrlc()); +} + +void post_word_store (ulong a) +{ + volatile ulong *save_addr = + (volatile ulong *)(CFG_POST_WORD_ADDR); + + *save_addr = a; +} + +ulong post_word_load (void) +{ + volatile ulong *save_addr = + (volatile ulong *)(CFG_POST_WORD_ADDR); + + return *save_addr; +} +#endif + +/*----------------------------------------------------------------------------- + * board_get_enetaddr -- Read the MAC Addresses in the I2C EEPROM + *----------------------------------------------------------------------------- + */ +static int enetaddr_num = 0; +void board_get_enetaddr (uchar * enet) +{ + int i; + unsigned char buff[0x100], *cp; + + /* Initialize I2C */ + i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + + /* Read 256 bytes in EEPROM */ + i2c_read (0x50, 0, 1, buff, 0x100); + + if (enetaddr_num == 0) { + cp = &buff[0xF4]; + enetaddr_num = 1; + } + else + cp = &buff[0xFA]; + + for (i = 0; i < 6; i++,cp++) + enet[i] = *cp; + + printf ("MAC address = %02x:%02x:%02x:%02x:%02x:%02x\n", + enet[0], enet[1], enet[2], enet[3], enet[4], enet[5]); + +} -- cgit v1.1