From 6b59e03e0237a40a2305ea385defdfd92000978b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 1 Sep 2008 16:21:22 +0200 Subject: lcd: Let the board code show board-specific info The information displayed when CONFIG_LCD_INFO is set is inherently board-specific, so it should be done by the board code. The current code dealing with this only handles two cases, and is already a horrible mess of #ifdeffery. Yes, this duplicates some code, but it also allows boards to print more board-specific information; this used to be very difficult. Signed-off-by: Haavard Skinnemoen Signed-off-by: Anatolij Gustschin --- board/tqc/tqm8xx/tqm8xx.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'board/tqc/tqm8xx') diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c index 9a0f3a0..928afed 100644 --- a/board/tqc/tqm8xx/tqm8xx.c +++ b/board/tqc/tqm8xx/tqm8xx.c @@ -568,6 +568,32 @@ void ide_led (uchar led, uchar status) } # endif +#ifdef CONFIG_LCD_INFO +#include + +void lcd_show_board_info(void) +{ + lcd_printf ("%s (%s - %s)\n", U_BOOT_VERSION, __DATE__, __TIME__); + lcd_printf ("(C) 2008 DENX Software Engineering GmbH\n"); + lcd_printf (" Wolfgang DENK, wd@denx.de\n"); +#ifdef CONFIG_LCD_INFO_BELOW_LOGO + lcd_printf ("MPC823 CPU at %s MHz\n", + strmhz(temp, gd->cpu_clk)); + lcd_drawchars (LCD_INFO_X, LCD_INFO_Y + VIDEO_FONT_HEIGHT * 3, + info, strlen(info)); + lcd_printf (" %ld MB RAM, %ld MB Flash\n", + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#else + /* leave one blank line */ + lcd_printf ("\nMPC823 CPU at %s MHz, %ld MB RAM, %ld MB Flash\n", + strmhz(temp, gd->cpu_clk), + gd->ram_size >> 20, + gd->bd->bi_flashsize >> 20 ); +#endif /* CONFIG_LCD_INFO_BELOW_LOGO */ +} +#endif /* CONFIG_LCD_INFO */ + /* ---------------------------------------------------------------------------- */ /* TK885D specific initializaion */ /* ---------------------------------------------------------------------------- */ -- cgit v1.1