From cfa460adfdefcc30d104e1a9ee44994ee349bb7b Mon Sep 17 00:00:00 2001 From: William Juul Date: Wed, 31 Oct 2007 13:53:06 +0100 Subject: Update MTD to that of Linux 2.6.22.1 A lot changed in the Linux MTD code, since it was last ported from Linux to U-Boot. This patch takes U-Boot NAND support to the level of Linux 2.6.22.1 and will enable support for very large NAND devices (4KB pages) and ease the compatibility between U-Boot and Linux filesystems. This patch is tested on two custom boards with PPC and ARM processors running YAFFS in U-Boot and Linux using gcc-4.1.2 cross compilers. MAKEALL ppc/arm has some issues: * DOC/OneNand/nand_spl is not building (I have not tried porting these parts, and since I do not have any HW and I am not familiar with this code/HW I think its best left to someone else.) Except for the issues mentioned above, I have ported all drivers necessary to run MAKEALL ppc/arm without errors and warnings. Many drivers were trivial to port, but some were not so trivial. The following drivers must be examined carefully and maybe rewritten to some degree: cpu/ppc4xx/ndfc.c cpu/arm926ejs/davinci/nand.c board/delta/nand.c board/zylonite/nand.c Signed-off-by: William Juul Signed-off-by: Stig Olsen Signed-off-by: Scott Wood --- board/tqc/tqm8272/tqm8272.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) (limited to 'board/tqc/tqm8272/tqm8272.c') diff --git a/board/tqc/tqm8272/tqm8272.c b/board/tqc/tqm8272/tqm8272.c index cde0296..5148f3d 100644 --- a/board/tqc/tqm8272/tqm8272.c +++ b/board/tqc/tqm8272/tqm8272.c @@ -1068,24 +1068,22 @@ int update_flash_size (int flash_size) static u8 hwctl = 0; -static void upmnand_hwcontrol(struct mtd_info *mtdinfo, int cmd) +static void upmnand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl) { - switch (cmd) { - case NAND_CTL_SETCLE: - hwctl |= 0x1; - break; - case NAND_CTL_CLRCLE: - hwctl &= ~0x1; - break; - - case NAND_CTL_SETALE: - hwctl |= 0x2; - break; - - case NAND_CTL_CLRALE: - hwctl &= ~0x2; - break; + struct nand_chip *this = mtd->priv; + + if (ctrl & NAND_CTRL_CHANGE) { + if ( ctrl & NAND_CLE ) + hwctl |= 0x1; + else + hwctl &= ~0x1; + if ( ctrl & NAND_ALE ) + hwctl |= 0x2; + else + hwctl &= ~0x2; } + if (cmd != NAND_CMD_NONE) + writeb(cmd, this->IO_ADDR_W); } static void upmnand_write_byte(struct mtd_info *mtdinfo, u_char byte) @@ -1188,9 +1186,9 @@ int board_nand_init(struct nand_chip *nand) memctl->memc_br3 = CFG_NAND_BR; memctl->memc_mbmr = (MxMR_OP_NORM); - nand->eccmode = NAND_ECC_SOFT; + nand->ecc.mode = NAND_ECC_SOFT; - nand->hwcontrol = upmnand_hwcontrol; + nand->cmd_ctrl = upmnand_hwcontrol; nand->read_byte = upmnand_read_byte; nand->write_byte = upmnand_write_byte; nand->dev_ready = tqm8272_dev_ready; -- cgit v1.1