From e52e334e5cb493e19377d23a00aa4d021fc229ba Mon Sep 17 00:00:00 2001 From: Nishanth Menon Date: Thu, 21 Apr 2016 14:34:25 -0500 Subject: ARM: DRA7: Add ABB setup for all domains ABB should be initialized for all required domains voltage domain for DRA7: IVA, GPU, EVE in addition to the existing MPU domain. If we do not do this, kernel configuring just the frequency using the default boot loader configured voltage can fail on many corner lot units and has been hard to debug. This specifically is a concern with DRA7 generation of SoCs since other than VDD_MPU, all other domains are only permitted to setup the voltages to required OPP only at boot. Reported-by: Richard Woodruff Signed-off-by: Nishanth Menon --- board/ti/am57xx/board.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'board/ti') diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 2404eb5..86b8f6e 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -228,12 +228,14 @@ struct vcores_data beagle_x15_volts = { .eve.efuse.reg_bits = DRA752_EFUSE_REGBITS, .eve.addr = TPS659038_REG_ADDR_SMPS45, .eve.pmic = &tps659038, + .eve.abb_tx_done_mask = OMAP_ABB_EVE_TXDONE_MASK, .gpu.value = VDD_GPU_DRA752, .gpu.efuse.reg = STD_FUSE_OPP_VMIN_GPU_NOM, .gpu.efuse.reg_bits = DRA752_EFUSE_REGBITS, .gpu.addr = TPS659038_REG_ADDR_SMPS45, .gpu.pmic = &tps659038, + .gpu.abb_tx_done_mask = OMAP_ABB_GPU_TXDONE_MASK, .core.value = VDD_CORE_DRA752, .core.efuse.reg = STD_FUSE_OPP_VMIN_CORE_NOM, @@ -246,6 +248,7 @@ struct vcores_data beagle_x15_volts = { .iva.efuse.reg_bits = DRA752_EFUSE_REGBITS, .iva.addr = TPS659038_REG_ADDR_SMPS45, .iva.pmic = &tps659038, + .iva.abb_tx_done_mask = OMAP_ABB_IVA_TXDONE_MASK, }; #ifdef CONFIG_SPL_BUILD -- cgit v1.1