From 0a888f584c48984cb9657a5d42dc994b33c264a7 Mon Sep 17 00:00:00 2001 From: Mugunthan V N Date: Mon, 22 Jun 2015 14:43:10 +0530 Subject: ARM: DRA72x: fix io delay calibration for ethernet we currently use in-development IODelay values for DRA72x which are proposed in the data sheet, however, DRA72x EVM uses DP83865 ethernet Phy over RGMII. The PHY characteristics and routing choices made on the EVM, make the current iodelay values fail ethernet communication. Instead, we need to choose custom values for DRA72x-evm specifically designed for the PHY and routing on the platform for ethernet to function. Cc: Nishanth Menon Cc: Lokesh Vutla Tested-by: Lokesh Vutla Reviewed-by: Nishanth Menon Signed-off-by: Mugunthan V N --- board/ti/dra7xx/mux_data.h | 49 +++++++++++++++++++++++----------------------- 1 file changed, 25 insertions(+), 24 deletions(-) (limited to 'board/ti') diff --git a/board/ti/dra7xx/mux_data.h b/board/ti/dra7xx/mux_data.h index c9301a5..5145301 100644 --- a/board/ti/dra7xx/mux_data.h +++ b/board/ti/dra7xx/mux_data.h @@ -156,30 +156,31 @@ const struct pad_conf_entry early_padconf[] = { #ifdef CONFIG_IODELAY_RECALIBRATION const struct iodelay_cfg_entry iodelay_cfg_array[] = { - {0x6F0, 480, 0}, /* RGMMI0_RXC_IN */ - {0x6FC, 111, 1641}, /* RGMMI0_RXCTL_IN */ - {0x708, 272, 1116}, /* RGMMI0_RXD0_IN */ - {0x714, 243, 1260}, /* RGMMI0_RXD1_IN */ - {0x720, 0, 1614}, /* RGMMI0_RXD2_IN */ - {0x72C, 105, 1673}, /* RGMMI0_RXD3_IN */ - {0x740, 531, 120}, /* RGMMI0_TXC_OUT */ - {0x74C, 11, 60}, /* RGMMI0_TXCTL_OUT */ - {0x758, 7, 120}, /* RGMMI0_TXD0_OUT */ - {0x764, 0, 0}, /* RGMMI0_TXD1_OUT */ - {0x770, 276, 120}, /* RGMMI0_TXD2_OUT */ - {0x77C, 440, 120}, /* RGMMI0_TXD3_OUT */ - {0xAB0, 702, 0}, /* CFG_VIN2A_D18_IN */ - {0xABC, 136, 976}, /* CFG_VIN2A_D19_IN */ - {0xAD4, 210, 1357}, /* CFG_VIN2A_D20_IN */ - {0xAE0, 189, 1462}, /* CFG_VIN2A_D21_IN */ - {0xAEC, 232, 1278}, /* CFG_VIN2A_D22_IN */ - {0xAF8, 0, 1397}, /* CFG_VIN2A_D23_IN */ - {0xA70, 1551, 115}, /* CFG_VIN2A_D12_OUT */ - {0xA7C, 816, 0}, /* CFG_VIN2A_D13_OUT */ - {0xA88, 876, 0}, /* CFG_VIN2A_D14_OUT */ - {0xA94, 312, 0}, /* CFG_VIN2A_D15_OUT */ - {0xAA0, 58, 0}, /* CFG_VIN2A_D16_OUT */ - {0xAAC, 0, 0}, /* CFG_VIN2A_D17_OUT */ + {0x6F0, 359, 0}, /* RGMMI0_RXC_IN */ + {0x6FC, 129, 1896}, /* RGMMI0_RXCTL_IN */ + {0x708, 80, 1391}, /* RGMMI0_RXD0_IN */ + {0x714, 196, 1522}, /* RGMMI0_RXD1_IN */ + {0x720, 40, 1860}, /* RGMMI0_RXD2_IN */ + {0x72C, 0, 1956}, /* RGMMI0_RXD3_IN */ + {0x740, 0, 220}, /* RGMMI0_TXC_OUT */ + {0x74C, 1820, 180}, /* RGMMI0_TXCTL_OUT */ + {0x758, 1740, 440}, /* RGMMI0_TXD0_OUT */ + {0x764, 1740, 240}, /* RGMMI0_TXD1_OUT */ + {0x770, 1680, 380}, /* RGMMI0_TXD2_OUT */ + {0x77C, 1740, 440}, /* RGMMI0_TXD3_OUT */ + /* These values are for using RGMII1 configuration on VIN2a_x pins. */ + {0xAB0, 596, 0}, /* CFG_VIN2A_D18_IN */ + {0xABC, 314, 980}, /* CFG_VIN2A_D19_IN */ + {0xAD4, 241, 1536}, /* CFG_VIN2A_D20_IN */ + {0xAE0, 103, 1689}, /* CFG_VIN2A_D21_IN */ + {0xAEC, 161, 1563}, /* CFG_VIN2A_D22_IN */ + {0xAF8, 0, 1613}, /* CFG_VIN2A_D23_IN */ + {0xA70, 0, 200}, /* CFG_VIN2A_D12_OUT */ + {0xA7C, 1560, 140}, /* CFG_VIN2A_D13_OUT */ + {0xA88, 1700, 0}, /* CFG_VIN2A_D14_OUT */ + {0xA94, 1260, 0}, /* CFG_VIN2A_D15_OUT */ + {0xAA0, 1400, 0}, /* CFG_VIN2A_D16_OUT */ + {0xAAC, 1290, 0}, /* CFG_VIN2A_D17_OUT */ }; #endif -- cgit v1.1