From 78f455c055ddf55a1a2dd6ae5e2d060ed2e5bd0e Mon Sep 17 00:00:00 2001 From: Sricharan Date: Tue, 15 Nov 2011 09:50:03 -0500 Subject: omap4/5: Add support for booting with CH. Configuration header(CH) is 512 byte header attached to an OMAP boot image that will help ROM code to initialize clocks, SDRAM etc and copy U-Boot directly into SDRAM. CH can help us in by-passing SPL and directly boot U-boot, hence it's an alternative for SPL. However, we intend to support both CH and SPL for OMAP4/5. Initialization done through CH is limited and is not equivalent to that done by SPL. So U-Boot has to distinguish between the two cases and handle them accordingly. This patch takes care of doing this. Signed-off-by: sricharan Signed-off-by: Sandeep Paulraj --- board/ti/sdp4430/sdp4430_mux_data.h | 17 +++++++++-------- 1 file changed, 9 insertions(+), 8 deletions(-) (limited to 'board/ti/sdp4430') diff --git a/board/ti/sdp4430/sdp4430_mux_data.h b/board/ti/sdp4430/sdp4430_mux_data.h index f36b663..1c6e0ee 100644 --- a/board/ti/sdp4430/sdp4430_mux_data.h +++ b/board/ti/sdp4430/sdp4430_mux_data.h @@ -50,14 +50,6 @@ const struct pad_conf_entry core_padconf_array_essential[] = { {SDMMC1_DAT5, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat5 */ {SDMMC1_DAT6, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat6 */ {SDMMC1_DAT7, (PTU | IEN | OFF_EN | OFF_PD | OFF_IN | M0)}, /* sdmmc1_dat7 */ -{I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ -{I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ -{I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ -{I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ -{I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ -{I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ -{I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ -{I2C4_SDA, (PTU | IEN | M0)}, /* i2c4_sda */ {UART3_CTS_RCTX, (PTU | IEN | M0)}, /* uart3_tx */ {UART3_RTS_SD, (M0)}, /* uart3_rts_sd */ {UART3_RX_IRRX, (IEN | M0)}, /* uart3_rx */ @@ -251,6 +243,15 @@ const struct pad_conf_entry core_padconf_array_non_essential[] = { {DPM_EMU17, (IEN | M5)}, /* dispc2_data2 */ {DPM_EMU18, (IEN | M5)}, /* dispc2_data1 */ {DPM_EMU19, (IEN | M5)}, /* dispc2_data0 */ + {I2C1_SCL, (PTU | IEN | M0)}, /* i2c1_scl */ + {I2C1_SDA, (PTU | IEN | M0)}, /* i2c1_sda */ + {I2C2_SCL, (PTU | IEN | M0)}, /* i2c2_scl */ + {I2C2_SDA, (PTU | IEN | M0)}, /* i2c2_sda */ + {I2C3_SCL, (PTU | IEN | M0)}, /* i2c3_scl */ + {I2C3_SDA, (PTU | IEN | M0)}, /* i2c3_sda */ + {I2C4_SCL, (PTU | IEN | M0)}, /* i2c4_scl */ + {I2C4_SDA, (PTU | IEN | M0)} /* i2c4_sda */ + }; const struct pad_conf_entry wkup_padconf_array_non_essential[] = { -- cgit v1.1