From 47f58a7357c27ad10b7853cdd7cd018692bfbae0 Mon Sep 17 00:00:00 2001 From: "Hunter, Jon" Date: Wed, 3 Apr 2013 09:35:34 +0000 Subject: omap2420-h4: Fix booting from NOR flash The omap2420-h4 board is using a RAM based address as the linker location for code. This is causing several problems when attempting to run the latest u-boot code base on this board from flash. Update the default linker location for code to be in NOR flash. Please note that OMAP maps the NOR flash to address 0x08000000 by default and so use this as the default address for the NOR flash. Also remove legacy code that attempts to calculate where in flash the sdata structure, that holds the memory interface configuration data, is located. By changing the default linker location for code to flash this is no longer necessary. Signed-off-by: Jon Hunter --- board/ti/omap2420h4/config.mk | 4 ++-- board/ti/omap2420h4/mem.c | 13 ------------- 2 files changed, 2 insertions(+), 15 deletions(-) (limited to 'board/ti/omap2420h4') diff --git a/board/ti/omap2420h4/config.mk b/board/ti/omap2420h4/config.mk index ca5ebdf..e5dff69 100644 --- a/board/ti/omap2420h4/config.mk +++ b/board/ti/omap2420h4/config.mk @@ -14,7 +14,7 @@ # (mem base + reserved) # For use with external or internal boots. -CONFIG_SYS_TEXT_BASE = 0x80e80000 +#CONFIG_SYS_TEXT_BASE = 0x80e80000 # Used with full SRAM boot. # This is either with a GP system or a signed boot image. @@ -24,5 +24,5 @@ CONFIG_SYS_TEXT_BASE = 0x80e80000 # Handy to get symbols to debug ROM version. #CONFIG_SYS_TEXT_BASE = 0x0 -#CONFIG_SYS_TEXT_BASE = 0x08000000 +CONFIG_SYS_TEXT_BASE = 0x08000000 #CONFIG_SYS_TEXT_BASE = 0x04000000 diff --git a/board/ti/omap2420h4/mem.c b/board/ti/omap2420h4/mem.c index c8b4186..ba3f12a 100644 --- a/board/ti/omap2420h4/mem.c +++ b/board/ti/omap2420h4/mem.c @@ -200,19 +200,6 @@ void do_sdrc_init(u32 offset, u32 early) __asm__ __volatile__("": : :"memory"); /* limit compiler scope */ - /* u-boot is compiled to run in DDR or SRAM at 8xxxxxxx or 4xxxxxxx. - * If we are running in flash prior to relocation and we use data - * here which is not pc relative we need to get the address correct. - * We need to find the current flash mapping to dress up the initial - * pointer load. As long as this is const data we should be ok. - */ - if((early) && running_in_flash()){ - sdata = (sdrc_data_t *)(((u32)sdata & 0x0003FFFF) | get_gpmc0_base()); - /* NOR internal boot offset is 0x4000 from xloader signature */ - if(running_from_internal_boot()) - sdata = (sdrc_data_t *)((u32)sdata + 0x4000); - } - if (!early && (((mtype = get_mem_type()) == DDR_COMBO)||(mtype == DDR_STACKED))) { if(mtype == DDR_COMBO){ pmask = BIT2;/* combo part has a shared CKE signal, can't use feature */ -- cgit v1.1