From 0a0e4bad9693ef1d2ca8c33ba551d395a4e3d641 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Sun, 23 Aug 2009 16:32:38 +0200 Subject: omap: move TI's boards to board/ti/ Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/ti/omap1510inn/omap1510innovator.c | 129 +++++++++++++++++++++++++++++++ 1 file changed, 129 insertions(+) create mode 100644 board/ti/omap1510inn/omap1510innovator.c (limited to 'board/ti/omap1510inn/omap1510innovator.c') diff --git a/board/ti/omap1510inn/omap1510innovator.c b/board/ti/omap1510inn/omap1510innovator.c new file mode 100644 index 0000000..8941209 --- /dev/null +++ b/board/ti/omap1510inn/omap1510innovator.c @@ -0,0 +1,129 @@ +/* + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH + * Marius Groeger + * + * (C) Copyright 2002 + * David Mueller, ELSOFT AG, + * + * (C) Copyright 2003 + * Texas Instruments, + * Kshitij Gupta + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include + +DECLARE_GLOBAL_DATA_PTR; + +static void flash__init (void); +static void ether__init (void); + +static inline void delay (unsigned long loops) +{ + __asm__ volatile ("1:\n" + "subs %0, %1, #1\n" + "bne 1b":"=r" (loops):"0" (loops)); +} + +/* + * Miscellaneous platform dependent initialisations + */ + +int board_init (void) +{ + /* arch number of OMAP 1510-Board */ + gd->bd->bi_arch_number = MACH_TYPE_OMAP_INNOVATOR; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x10000100; + +/* kk - this speeds up your boot a quite a bit. However to make it + * work, you need make sure your kernel startup flush bug is fixed. + * ... rkw ... + */ + icache_enable (); + + flash__init (); + ether__init (); + return 0; +} + + +int misc_init_r (void) +{ + /* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */ + /* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */ + + /* setup gpio direction to match board (no floats!) */ + /**gdir = 0xCFF9; */ + /**mdir = 0x103F; */ + + return (0); +} + +/****************************** + Routine: + Description: +******************************/ +static void flash__init (void) +{ +#define CS0_CHIP_SELECT_REG 0xfffecc10 +#define CS3_CHIP_SELECT_REG 0xfffecc1c +#define EMIFS_GlB_Config_REG 0xfffecc0c + + { + unsigned int regval; + + regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG); + regval = regval | 0x0001; /* Turn off write protection for flash devices. */ + if (regval & 0x0002) { + regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */ + /* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */ + /* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */ + /* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */ + } + *((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval; + } +} + + +/****************************** + Routine: + Description: +******************************/ +static void ether__init (void) +{ +#define ETH_CONTROL_REG 0x0800000b + /* take the Ethernet controller out of reset and wait + * for the EEPROM load to complete. + */ + *((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01; + udelay (3); +} + + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return 0; +} -- cgit v1.1