From 55efadde7edee407a14c7cbf418c82b30a94faa8 Mon Sep 17 00:00:00 2001 From: Roger Quadros Date: Mon, 23 May 2016 17:37:48 +0300 Subject: ARM: AM57xx: AM43xx: Fix USB host CONFIG_USB_XHCI_OMAP can be set for host mode without setting CONFIG_USB_DWC3 which is meant for gadget mode only. board_usb_init() was not being defined for CONFIG_USB_XHCI_OMAP resulting in a data abort on usb start. Define board_usb_init() for CONFIG_USB_XHCI_OMAP case. Move gadget specific handling to within CONFIG_USB_DWC3. Fixes: 6f1af1e358b7 ("board: ti: invoke clock API to enable and disable clocks") Signed-off-by: Roger Quadros --- board/ti/am57xx/board.c | 54 ++++++++++++++++++++++++------------------------- 1 file changed, 26 insertions(+), 28 deletions(-) (limited to 'board/ti/am57xx/board.c') diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index 9904047..7142a92 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -439,6 +439,19 @@ static struct ti_usb_phy_device usb_phy2_device = { .index = 1, }; +int usb_gadget_handle_interrupts(int index) +{ + u32 status; + + status = dwc3_omap_uboot_interrupt_status(index); + if (status) + dwc3_uboot_handle_interrupt(index); + + return 0; +} +#endif /* CONFIG_USB_DWC3 */ + +#if defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) int board_usb_init(int index, enum usb_init_type init) { enable_usb_clocks(index); @@ -448,31 +461,23 @@ int board_usb_init(int index, enum usb_init_type init) printf("port %d can't be used as device\n", index); disable_usb_clocks(index); return -EINVAL; - } else { - usb_otg_ss1.dr_mode = USB_DR_MODE_HOST; - usb_otg_ss1_glue.vbus_id_status = OMAP_DWC3_ID_GROUND; - setbits_le32((*prcm)->cm_l3init_usb_otg_ss1_clkctrl, - OTG_SS_CLKCTRL_MODULEMODE_HW | - OPTFCLKEN_REFCLK960M); } - - ti_usb_phy_uboot_init(&usb_phy1_device); - dwc3_omap_uboot_init(&usb_otg_ss1_glue); - dwc3_uboot_init(&usb_otg_ss1); break; case 1: if (init == USB_INIT_DEVICE) { +#ifdef CONFIG_USB_DWC3 usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; + ti_usb_phy_uboot_init(&usb_phy2_device); + dwc3_omap_uboot_init(&usb_otg_ss2_glue); + dwc3_uboot_init(&usb_otg_ss2); +#endif } else { printf("port %d can't be used as host\n", index); disable_usb_clocks(index); return -EINVAL; } - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); break; default: printf("Invalid Controller Index\n"); @@ -483,31 +488,24 @@ int board_usb_init(int index, enum usb_init_type init) int board_usb_cleanup(int index, enum usb_init_type init) { +#ifdef CONFIG_USB_DWC3 switch (index) { case 0: case 1: - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); + if (init == USB_INIT_DEVICE) { + ti_usb_phy_uboot_exit(index); + dwc3_uboot_exit(index); + dwc3_omap_uboot_exit(index); + } break; default: printf("Invalid Controller Index\n"); } +#endif disable_usb_clocks(index); return 0; } - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} -#endif +#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ #ifdef CONFIG_DRIVER_TI_CPSW -- cgit v1.1