From b5e01eecc89e3e5c2ed3c17b803529be3c3702fb Mon Sep 17 00:00:00 2001 From: Lokesh Vutla Date: Tue, 10 Dec 2013 15:02:23 +0530 Subject: ARM: AM43xx: GP_EVM: Add support for DDR3 GP EVM has 1GB DDR3 attached(Part no: MT41K512M8RH). Adding details for the same. Below is the brief description of DDR3 init sequence(SW leveling): -> Enable VTT regulator -> Configure VTP -> Configure DDR IO settings -> Disable initialization and refreshes until EMIF registers are programmed. -> Program Timing registers -> Program leveling registers -> Program PHY control and Temp alert and ZQ config registers. -> Enable initialization and refreshes and configure SDRAM CONFIG register Signed-off-by: Lokesh Vutla --- board/ti/am43xx/board.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++-- board/ti/am43xx/mux.c | 8 +++++ 2 files changed, 98 insertions(+), 3 deletions(-) (limited to 'board/ti/am43xx') diff --git a/board/ti/am43xx/board.c b/board/ti/am43xx/board.c index 5a013e3..ed87cd9 100644 --- a/board/ti/am43xx/board.c +++ b/board/ti/am43xx/board.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include "board.h" @@ -179,10 +180,70 @@ const u32 ext_phy_ctrl_const_base_lpddr2[] = { 0x08102040 }; +const struct ctrl_ioregs ioregs_ddr3 = { + .cm0ioctl = DDR3_ADDRCTRL_IOCTRL_VALUE, + .cm1ioctl = DDR3_ADDRCTRL_WD0_IOCTRL_VALUE, + .cm2ioctl = DDR3_ADDRCTRL_WD1_IOCTRL_VALUE, + .dt0ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt1ioctl = DDR3_DATA0_IOCTRL_VALUE, + .dt2ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .dt3ioctrl = DDR3_DATA0_IOCTRL_VALUE, + .emif_sdram_config_ext = 0x0043, +}; + +const struct emif_regs ddr3_emif_regs_400Mhz = { + .sdram_config = 0x638413B2, + .ref_ctrl = 0x00000C30, + .sdram_tim1 = 0xEAAAD4DB, + .sdram_tim2 = 0x266B7FDA, + .sdram_tim3 = 0x107F8678, + .read_idle_ctrl = 0x00050000, + .zq_config = 0x50074BE4, + .temp_alert_config = 0x0, + .emif_ddr_phy_ctlr_1 = 0x0E084008, + .emif_ddr_ext_phy_ctrl_1 = 0x08020080, + .emif_ddr_ext_phy_ctrl_2 = 0x00400040, + .emif_ddr_ext_phy_ctrl_3 = 0x00400040, + .emif_ddr_ext_phy_ctrl_4 = 0x00400040, + .emif_ddr_ext_phy_ctrl_5 = 0x00400040, + .emif_rd_wr_lvl_rmp_win = 0x0, + .emif_rd_wr_lvl_rmp_ctl = 0x0, + .emif_rd_wr_lvl_ctl = 0x0, + .emif_rd_wr_exec_thresh = 0x00000405 +}; + +const u32 ext_phy_ctrl_const_base_ddr3[] = { + 0x00400040, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00350035, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00000000, + 0x00340034, + 0x00340034, + 0x00340034, + 0x00340034, + 0x00340034, + 0x0, + 0x0, + 0x40000000, + 0x08102040 +}; + void emif_get_ext_phy_ctrl_const_regs(const u32 **regs, u32 *size) { - *regs = ext_phy_ctrl_const_base_lpddr2; - *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2); + if (board_is_eposevm()) { + *regs = ext_phy_ctrl_const_base_lpddr2; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_lpddr2); + } else if (board_is_gpevm()) { + *regs = ext_phy_ctrl_const_base_ddr3; + *size = ARRAY_SIZE(ext_phy_ctrl_const_base_ddr3); + } return; } @@ -280,9 +341,35 @@ void set_mux_conf_regs(void) enable_board_pin_mux(); } +static void enable_vtt_regulator(void) +{ + u32 temp; + + /* enable module */ + writel(GPIO_CTRL_ENABLEMODULE, AM33XX_GPIO0_BASE + OMAP_GPIO_CTRL); + + /* enable output for GPIO0_22 */ + writel(GPIO_SETDATAOUT(GPIO_22), + AM33XX_GPIO0_BASE + OMAP_GPIO_SETDATAOUT); + temp = readl(AM33XX_GPIO0_BASE + OMAP_GPIO_OE); + temp = temp & ~(GPIO_OE_ENABLE(GPIO_22)); + writel(temp, AM33XX_GPIO0_BASE + OMAP_GPIO_OE); +} + void sdram_init(void) { - config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0); + /* + * EPOS EVM has 1GB LPDDR2 connected to EMIF. + * GP EMV has 1GB DDR3 connected to EMIF + * along with VTT regulator. + */ + if (board_is_eposevm()) { + config_ddr(0, &ioregs_lpddr2, NULL, NULL, &emif_regs_lpddr2, 0); + } else if (board_is_gpevm()) { + enable_vtt_regulator(); + config_ddr(0, &ioregs_ddr3, NULL, NULL, + &ddr3_emif_regs_400Mhz, 0); + } } #endif diff --git a/board/ti/am43xx/mux.c b/board/ti/am43xx/mux.c index a2d72dd..810b194 100644 --- a/board/ti/am43xx/mux.c +++ b/board/ti/am43xx/mux.c @@ -33,6 +33,11 @@ static struct module_pin_mux i2c0_pin_mux[] = { {-1}, }; +static struct module_pin_mux gpio0_22_pin_mux[] = { + {OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)}, /* GPIO0_22 */ + {-1}, +}; + void enable_uart0_pin_mux(void) { configure_module_pin_mux(uart0_pin_mux); @@ -42,6 +47,9 @@ void enable_board_pin_mux(void) { configure_module_pin_mux(mmc0_pin_mux); configure_module_pin_mux(i2c0_pin_mux); + + if (board_is_gpevm()) + configure_module_pin_mux(gpio0_22_pin_mux); } void enable_i2c0_pin_mux(void) -- cgit v1.1