From 0299c90f396c5b2971a4bac596339f4b03661c27 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Tue, 20 Oct 2015 15:14:47 +0200 Subject: arm: mvebu: Add SolidRun ClearFog Armada 38x initial support This patch adds basic support for the SolidRun ClearFog Armada 38x based board to mainline U-Boot. Supported interfaces / devices are: - DDR3 - UART - MMC - Ethernet port 0 (connected to dedicated PHY) - I2C The included DT source was taken from Russell King's ftp server: http://www.home.arm.linux.org.uk/~rmk/clearfog/ With only minor modifications, like the addition of some aliases and the "u-boot,dm-pre-reloc" property. Signed-off-by: Stefan Roese Cc: Rabeeh Khoury Cc: Luka Perkov --- board/solidrun/clearfog/README | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) create mode 100644 board/solidrun/clearfog/README (limited to 'board/solidrun/clearfog/README') diff --git a/board/solidrun/clearfog/README b/board/solidrun/clearfog/README new file mode 100644 index 0000000..2cfa5bf --- /dev/null +++ b/board/solidrun/clearfog/README @@ -0,0 +1,18 @@ +Update from original Marvell U-Boot to mainline U-Boot: +------------------------------------------------------- + +Generate the U-Boot image with these commands: + +$ make clearfog_defconfig +$ make + +The resulting image including the SPL binary with the +full DDR setup is "u-boot-spl.kwb". + +Now all you need to do is copy this image on a SD card. +For example with this command: + +$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 + +Please use the correct device node for your setup instead +of "/dev/sdX" here! -- cgit v1.1