From 820969f370ac9e0a6cb672ea54a62163bf1d88a3 Mon Sep 17 00:00:00 2001 From: "Egli, Samuel" Date: Mon, 5 May 2014 16:50:43 +0200 Subject: siemens:cosmetic, dxr2: rename dxr2 to draco The actual board name is draco and dxr2 is the target name. In the future we'll have different targets based on draco board. All changes are purely non-functional and basically rename dxr2 to draco. One style fix in board.c that existed already before. Signed-off-by: Samuel Egli Reviewed-by: Roger Meier Cc: Heiko Schocher Cc: Wolfgang Denk --- board/siemens/draco/board.h | 72 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 72 insertions(+) create mode 100644 board/siemens/draco/board.h (limited to 'board/siemens/draco/board.h') diff --git a/board/siemens/draco/board.h b/board/siemens/draco/board.h new file mode 100644 index 0000000..ff8ab76 --- /dev/null +++ b/board/siemens/draco/board.h @@ -0,0 +1,72 @@ +/* + * board.h + * + * (C) Copyright 2013 Siemens Schweiz AG + * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. + * + * Based on: + * TI AM335x boards information header + * u-boot:/board/ti/am335x/board.h + * + * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/ + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +#define PARGS3(x) settings.ddr3.x-ddr3_default.x, \ + settings.ddr3.x, ddr3_default.x +#define PRINTARGS(y) printf("%x, %8x, %8x : "#y"\n", PARGS3(y)) +#define MAGIC_CHIP 0x50494843 + +/* Automatic generated definition */ +/* Wed, 16 Apr 2014 16:50:41 +0200 */ +/* From file: draco/ddr3-data-universal-default@303MHz-i0-ES3.txt */ +struct ddr3_data { + unsigned int magic; /* 0x33524444 */ + unsigned int version; /* 0x56312e35 */ + unsigned short int ddr3_sratio; /* 0x0080 */ + unsigned short int iclkout; /* 0x0000 */ + unsigned short int dt0rdsratio0; /* 0x003A */ + unsigned short int dt0wdsratio0; /* 0x003F */ + unsigned short int dt0fwsratio0; /* 0x009F */ + unsigned short int dt0wrsratio0; /* 0x0079 */ + unsigned int sdram_tim1; /* 0x0888A39B */ + unsigned int sdram_tim2; /* 0x26247FDA */ + unsigned int sdram_tim3; /* 0x501F821F */ + unsigned int emif_ddr_phy_ctlr_1; /* 0x00100206 */ + unsigned int sdram_config; /* 0x61A44A32 */ + unsigned int ref_ctrl; /* 0x0000093B */ + unsigned int ioctr_val; /* 0x0000014A */ + char manu_name[32]; /* "default@303MHz \0" */ + char manu_marking[32]; /* "default \0" */ +}; + +struct chip_data { + unsigned int magic; + char sdevname[16]; + char shwver[7]; +}; + +struct draco_baseboard_id { + struct ddr3_data ddr3; + struct chip_data chip; +}; + +/* + * We have three pin mux functions that must exist. We must be able to enable + * uart0, for initial output and i2c0 to read the main EEPROM. We then have a + * main pinmux function that can be overridden to enable all other pinmux that + * is required on the board. + */ +void enable_uart0_pin_mux(void); +void enable_uart1_pin_mux(void); +void enable_uart2_pin_mux(void); +void enable_uart3_pin_mux(void); +void enable_uart4_pin_mux(void); +void enable_uart5_pin_mux(void); +void enable_i2c0_pin_mux(void); +void enable_board_pin_mux(void); +#endif -- cgit v1.1