From d9abba8254c3e6b9a1d5c2e52c2d8088bbeb520f Mon Sep 17 00:00:00 2001 From: C Nauman Date: Tue, 26 Oct 2010 23:04:31 +0900 Subject: Add generic support for samsung s3c2440 This patch adds generic support for the Samsung s3c2440 processor. Global s3c24x0 changes to struct members converting from upper case to lower case. Signed-off-by: Craig Nauman Cc: kevin.morfitt@fearnside-systems.co.uk Signed-off-by: Minkyu Kang --- board/samsung/smdk2400/smdk2400.c | 28 ++++++++++++++-------------- board/samsung/smdk2410/smdk2410.c | 36 ++++++++++++++++++------------------ 2 files changed, 32 insertions(+), 32 deletions(-) (limited to 'board/samsung') diff --git a/board/samsung/smdk2400/smdk2400.c b/board/samsung/smdk2400/smdk2400.c index 1294d3f..895bd77 100644 --- a/board/samsung/smdk2400/smdk2400.c +++ b/board/samsung/smdk2400/smdk2400.c @@ -52,30 +52,30 @@ int board_init (void) /* memory and cpu-speed are setup before relocation */ /* change the clock to be 50 MHz 1:1:1 */ - clk_power->MPLLCON = 0x5c042; - clk_power->CLKDIVN = 0; + clk_power->mpllcon = 0x5c042; + clk_power->clkdivn = 0; /* set up the I/O ports */ - gpio->PACON = 0x3ffff; - gpio->PBCON = 0xaaaaaaaa; - gpio->PBUP = 0xffff; - gpio->PECON = 0x0; - gpio->PEUP = 0x0; + gpio->pacon = 0x3ffff; + gpio->pbcon = 0xaaaaaaaa; + gpio->pbup = 0xffff; + gpio->pecon = 0x0; + gpio->peup = 0x0; #ifdef CONFIG_HWFLOW /*CTS[0] RTS[0] INPUT INPUT TXD[0] INPUT RXD[0] */ /* 10, 10, 00, 00, 10, 00, 10 */ - gpio->PFCON=0xa22; + gpio->pfcon = 0xa22; /* Disable pull-up on Rx, Tx, CTS and RTS pins */ - gpio->PFUP=0x35; + gpio->pfup = 0x35; #else /*INPUT INPUT INPUT INPUT TXD[0] INPUT RXD[0] */ /* 00, 00, 00, 00, 10, 00, 10 */ - gpio->PFCON = 0x22; + gpio->pfcon = 0x22; /* Disable pull-up on Rx and Tx pins */ - gpio->PFUP = 0x5; + gpio->pfup = 0x5; #endif /* CONFIG_HWFLOW */ - gpio->PGCON = 0x0; - gpio->PGUP = 0x0; - gpio->OPENCR = 0x0; + gpio->pgcon = 0x0; + gpio->pgup = 0x0; + gpio->opencr = 0x0; /* arch number of SAMSUNG-Board to MACH_TYPE_SMDK2400 */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2400; diff --git a/board/samsung/smdk2410/smdk2410.c b/board/samsung/smdk2410/smdk2410.c index 5d1a8bb..76a24bb 100644 --- a/board/samsung/smdk2410/smdk2410.c +++ b/board/samsung/smdk2410/smdk2410.c @@ -73,36 +73,36 @@ int board_init (void) struct s3c24x0_gpio * const gpio = s3c24x0_get_base_gpio(); /* to reduce PLL lock time, adjust the LOCKTIME register */ - clk_power->LOCKTIME = 0xFFFFFF; + clk_power->locktime = 0xFFFFFF; /* configure MPLL */ - clk_power->MPLLCON = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); + clk_power->mpllcon = ((M_MDIV << 12) + (M_PDIV << 4) + M_SDIV); /* some delay between MPLL and UPLL */ delay (4000); /* configure UPLL */ - clk_power->UPLLCON = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); + clk_power->upllcon = ((U_M_MDIV << 12) + (U_M_PDIV << 4) + U_M_SDIV); /* some delay between MPLL and UPLL */ delay (8000); /* set up the I/O ports */ - gpio->GPACON = 0x007FFFFF; - gpio->GPBCON = 0x00044555; - gpio->GPBUP = 0x000007FF; - gpio->GPCCON = 0xAAAAAAAA; - gpio->GPCUP = 0x0000FFFF; - gpio->GPDCON = 0xAAAAAAAA; - gpio->GPDUP = 0x0000FFFF; - gpio->GPECON = 0xAAAAAAAA; - gpio->GPEUP = 0x0000FFFF; - gpio->GPFCON = 0x000055AA; - gpio->GPFUP = 0x000000FF; - gpio->GPGCON = 0xFF95FFBA; - gpio->GPGUP = 0x0000FFFF; - gpio->GPHCON = 0x002AFAAA; - gpio->GPHUP = 0x000007FF; + gpio->gpacon = 0x007FFFFF; + gpio->gpbcon = 0x00044555; + gpio->gpbup = 0x000007FF; + gpio->gpccon = 0xAAAAAAAA; + gpio->gpcup = 0x0000FFFF; + gpio->gpdcon = 0xAAAAAAAA; + gpio->gpdup = 0x0000FFFF; + gpio->gpecon = 0xAAAAAAAA; + gpio->gpeup = 0x0000FFFF; + gpio->gpfcon = 0x000055AA; + gpio->gpfup = 0x000000FF; + gpio->gpgcon = 0xFF95FFBA; + gpio->gpgup = 0x0000FFFF; + gpio->gphcon = 0x002AFAAA; + gpio->gphup = 0x000007FF; /* arch number of SMDK2410-Board */ gd->bd->bi_arch_number = MACH_TYPE_SMDK2410; -- cgit v1.1