From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/r360mpi/r360mpi.c | 40 ++++++++++++++++++++-------------------- 1 file changed, 20 insertions(+), 20 deletions(-) (limited to 'board/r360mpi/r360mpi.c') diff --git a/board/r360mpi/r360mpi.c b/board/r360mpi/r360mpi.c index c51e412..b502e4d 100644 --- a/board/r360mpi/r360mpi.c +++ b/board/r360mpi/r360mpi.c @@ -105,7 +105,7 @@ static long int dram_size (long int, long int *, long int); phys_size_t initdram (int board_type) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; long int size8, size9; long int size_b0 = 0; @@ -120,7 +120,7 @@ phys_size_t initdram (int board_type) * with two SDRAM banks or four cycles every 31.2 us with one * bank. It will be adjusted after memory sizing. */ - memctl->memc_mptpr = CFG_MPTPR_2BK_8K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K; memctl->memc_mar = 0x00000088; @@ -129,10 +129,10 @@ phys_size_t initdram (int board_type) * preliminary address - these have to be modified after the * SDRAM size has been determined. */ - memctl->memc_or2 = CFG_OR2_PRELIM; - memctl->memc_br2 = CFG_BR2_PRELIM; + memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM; + memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM; - memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */ udelay (200); @@ -152,7 +152,7 @@ phys_size_t initdram (int board_type) * * try 8 column mode */ - size8 = dram_size (CFG_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, + size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); udelay (1000); @@ -160,7 +160,7 @@ phys_size_t initdram (int board_type) /* * try 9 column mode */ - size9 = dram_size (CFG_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, + size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE); if (size8 < size9) { /* leave configuration at 9 columns */ @@ -168,7 +168,7 @@ phys_size_t initdram (int board_type) /* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */ } else { /* back to 8 columns */ size_b0 = size8; - memctl->memc_mamr = CFG_MAMR_8COL; + memctl->memc_mamr = CONFIG_SYS_MAMR_8COL; udelay (500); /* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */ } @@ -181,7 +181,7 @@ phys_size_t initdram (int board_type) */ if ((size_b0 < 0x02000000)) { /* reduce to 15.6 us (62.4 us / quad) */ - memctl->memc_mptpr = CFG_MPTPR_2BK_4K; + memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; udelay (1000); } @@ -189,20 +189,20 @@ phys_size_t initdram (int board_type) * Final mapping */ - memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM; - memctl->memc_br1 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; + memctl->memc_or1 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM; + memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V; /* adjust refresh rate depending on SDRAM type, one bank */ reg = memctl->memc_mptpr; - reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */ + reg >>= 1; /* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */ memctl->memc_mptpr = reg; udelay (10000); #ifdef CONFIG_CAN_DRIVER /* Initialize OR3 / BR3 */ - memctl->memc_or3 = CFG_OR3_CAN; /* switch GPLB_5 to GPLA_5 */ - memctl->memc_br3 = CFG_BR3_CAN; + memctl->memc_or3 = CONFIG_SYS_OR3_CAN; /* switch GPLB_5 to GPLA_5 */ + memctl->memc_br3 = CONFIG_SYS_BR3_CAN; /* Initialize MBMR */ memctl->memc_mbmr = MBMR_GPL_B4DIS; /* GPL_B4 works as UPWAITB */ @@ -256,7 +256,7 @@ phys_size_t initdram (int board_type) static long int dram_size (long int mamr_value, long int *base, long int maxsize) { - volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; volatile memctl8xx_t *memctl = &immap->im_memctl; memctl->memc_mamr = mamr_value; @@ -268,7 +268,7 @@ static long int dram_size (long int mamr_value, void r360_i2c_lcd_write (uchar data0, uchar data1) { - if (i2c_write (CFG_I2C_LCD_ADDR, data0, 1, &data1, 1)) { + if (i2c_write (CONFIG_SYS_I2C_LCD_ADDR, data0, 1, &data1, 1)) { printf("Can't write lcd data 0x%02X 0x%02X.\n", data0, data1); } } @@ -292,9 +292,9 @@ int misc_init_r (void) char *str; int i; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); - i2c_read (CFG_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN); + i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, (uchar *)kbd_data, KEYBD_DATALEN); for (i = 0; i < KEYBD_DATALEN; ++i) { sprintf (keybd_env + i + i, "%02X", kbd_data[i]); @@ -397,10 +397,10 @@ int do_kbd (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) uchar keybd_env[2 * KEYBD_DATALEN + 1]; int i; - i2c_init (CFG_I2C_SPEED, CFG_I2C_SLAVE); + i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); /* Read keys */ - i2c_read (CFG_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN); + i2c_read (CONFIG_SYS_I2C_KEY_ADDR, 0, 0, kbd_data, KEYBD_DATALEN); puts ("Keys:"); for (i = 0; i < KEYBD_DATALEN; ++i) { -- cgit v1.1