From 87cb6862b94e342d6c99467e0dbb0d4f625cc7ef Mon Sep 17 00:00:00 2001 From: Wolfgang Denk Date: Thu, 6 Oct 2005 17:08:18 +0200 Subject: Update make target for ARM supported boards. Use lowlevel_init() instead of platformsetup() [rename]. Patch by Peter Pearse, 06 Oct 2005 --- board/omap5912osk/lowlevel_init.S | 442 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 442 insertions(+) create mode 100644 board/omap5912osk/lowlevel_init.S (limited to 'board/omap5912osk/lowlevel_init.S') diff --git a/board/omap5912osk/lowlevel_init.S b/board/omap5912osk/lowlevel_init.S new file mode 100644 index 0000000..3b9633a --- /dev/null +++ b/board/omap5912osk/lowlevel_init.S @@ -0,0 +1,442 @@ +/* + * Board specific setup info + * + * (C) Copyright 2003 + * Texas Instruments, + * Kshitij Gupta + * + * Modified for OMAP 1610 H2 board by Nishant Kamat, Jan 2004 + * + * Modified for OMAP 5912 OSK board by Rishi Bhattacharya, Apr 2004 + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include + +#if defined(CONFIG_OMAP1610) +#include <./configs/omap1510.h> +#endif + + +_TEXT_BASE: + .word TEXT_BASE /* sdram load addr from config.mk */ + +.globl lowlevel_init +lowlevel_init: + + + /*------------------------------------------------------* + *mask all IRQs by setting all bits in the INTMR default* + *------------------------------------------------------*/ + mov r1, #0xffffffff + ldr r0, =REG_IHL1_MIR + str r1, [r0] + ldr r0, =REG_IHL2_MIR + str r1, [r0] + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT1) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT1 + ldr r1, VAL_ARM_IDLECT1 + str r1, [r0] + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT2) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT2 + ldr r1, VAL_ARM_IDLECT2 + str r1, [r0] + + /*------------------------------------------------------* + * Set up ARM CLM registers (IDLECT3) * + *------------------------------------------------------*/ + ldr r0, REG_ARM_IDLECT3 + ldr r1, VAL_ARM_IDLECT3 + str r1, [r0] + + + mov r1, #0x01 /* PER_EN bit */ + ldr r0, REG_ARM_RSTCT2 + strh r1, [r0] /* CLKM; Peripheral reset. */ + + /* Set CLKM to Sync-Scalable */ + /* I supposedly need to enable the dsp clock before switching */ + mov r1, #0x0000 + ldr r0, REG_ARM_SYSST + strh r1, [r0] + mov r0, #0x400 +1: + subs r0, r0, #0x1 /* wait for any bubbles to finish */ + bne 1b + ldr r1, VAL_ARM_CKCTL + ldr r0, REG_ARM_CKCTL + strh r1, [r0] + + /* a few nops to let settle */ + nop + nop + nop + nop + nop + nop + nop + nop + nop + nop + + /* setup DPLL 1 */ + /* Ramp up the clock to 96Mhz */ + ldr r1, VAL_DPLL1_CTL + ldr r0, REG_DPLL1_CTL + strh r1, [r0] + ands r1, r1, #0x10 /* Check if PLL is enabled. */ + beq lock_end /* Do not look for lock if BYPASS selected */ +2: + ldrh r1, [r0] + ands r1, r1, #0x01 /* Check the LOCK bit.*/ + beq 2b /* loop until bit goes hi. */ +lock_end: + + + /*------------------------------------------------------* + * Turn off the watchdog during init... * + *------------------------------------------------------*/ + ldr r0, REG_WATCHDOG + ldr r1, WATCHDOG_VAL1 + str r1, [r0] + ldr r1, WATCHDOG_VAL2 + str r1, [r0] + ldr r0, REG_WSPRDOG + ldr r1, WSPRDOG_VAL1 + str r1, [r0] + ldr r0, REG_WWPSDOG + +watch1Wait: + ldr r1, [r0] + tst r1, #0x10 + bne watch1Wait + + ldr r0, REG_WSPRDOG + ldr r1, WSPRDOG_VAL2 + str r1, [r0] + ldr r0, REG_WWPSDOG +watch2Wait: + ldr r1, [r0] + tst r1, #0x10 + bne watch2Wait + + + /* Set memory timings corresponding to the new clock speed */ + + /* Check execution location to determine current execution location + * and branch to appropriate initialization code. + */ + /* Load physical SDRAM base. */ + mov r0, #0x10000000 + /* Get current execution location. */ + mov r1, pc + /* Compare. */ + cmp r1, r0 + /* Skip over EMIF-fast initialization if running from SDRAM. */ + bge skip_sdram + + /* + * Delay for SDRAM initialization. + */ + mov r3, #0x1800 /* value should be checked */ +3: + subs r3, r3, #0x1 /* Decrement count */ + bne 3b + + + /* + * Set SDRAM control values. Disable refresh before MRS command. + */ + + /* mobile ddr operation */ + ldr r0, REG_SDRAM_OPERATION + mov r2, #07 + str r2, [r0] + + /* config register */ + ldr r0, REG_SDRAM_CONFIG + ldr r1, SDRAM_CONFIG_VAL + str r1, [r0] + + /* manual command register */ + ldr r0, REG_SDRAM_MANUAL_CMD + /* issue set cke high */ + mov r1, #CMD_SDRAM_CKE_SET_HIGH + str r1, [r0] + /* issue nop */ + mov r1, #CMD_SDRAM_NOP + str r1, [r0] + + mov r2, #0x0100 +waitMDDR1: + subs r2, r2, #1 + bne waitMDDR1 /* delay loop */ + + /* issue precharge */ + mov r1, #CMD_SDRAM_PRECHARGE + str r1, [r0] + + /* issue autorefresh x 2 */ + mov r1, #CMD_SDRAM_AUTOREFRESH + str r1, [r0] + str r1, [r0] + + /* mrs register ddr mobile */ + ldr r0, REG_SDRAM_MRS + mov r1, #0x33 + str r1, [r0] + + /* emrs1 low-power register */ + ldr r0, REG_SDRAM_EMRS1 + /* self refresh on all banks */ + mov r1, #0 + str r1, [r0] + + ldr r0, REG_DLL_URD_CONTROL + ldr r1, DLL_URD_CONTROL_VAL + str r1, [r0] + + ldr r0, REG_DLL_LRD_CONTROL + ldr r1, DLL_LRD_CONTROL_VAL + str r1, [r0] + + ldr r0, REG_DLL_WRT_CONTROL + ldr r1, DLL_WRT_CONTROL_VAL + str r1, [r0] + + /* delay loop */ + mov r2, #0x0100 +waitMDDR2: + subs r2, r2, #1 + bne waitMDDR2 + + /* + * Delay for SDRAM initialization. + */ + mov r3, #0x1800 +4: + subs r3, r3, #1 /* Decrement count. */ + bne 4b + b common_tc + +skip_sdram: + + ldr r0, REG_SDRAM_CONFIG + ldr r1, SDRAM_CONFIG_VAL + str r1, [r0] + +common_tc: + /* slow interface */ + ldr r1, VAL_TC_EMIFS_CS0_CONFIG + ldr r0, REG_TC_EMIFS_CS0_CONFIG + str r1, [r0] /* Chip Select 0 */ + + ldr r1, VAL_TC_EMIFS_CS1_CONFIG + ldr r0, REG_TC_EMIFS_CS1_CONFIG + str r1, [r0] /* Chip Select 1 */ + ldr r1, VAL_TC_EMIFS_CS3_CONFIG + ldr r0, REG_TC_EMIFS_CS3_CONFIG + str r1, [r0] /* Chip Select 3 */ + +#ifdef CONFIG_H2_OMAP1610 + /* inserting additional 2 clock cycle hold time for LAN */ + ldr r0, REG_TC_EMIFS_CS1_ADVANCED + ldr r1, VAL_TC_EMIFS_CS1_ADVANCED + str r1, [r0] +#endif + /* Start MPU Timer 1 */ + ldr r0, REG_MPU_LOAD_TIMER + ldr r1, VAL_MPU_LOAD_TIMER + str r1, [r0] + + ldr r0, REG_MPU_CNTL_TIMER + ldr r1, VAL_MPU_CNTL_TIMER + str r1, [r0] + + /* back to arch calling code */ + mov pc, lr + + /* the literal pools origin */ + .ltorg + + +REG_TC_EMIFS_CONFIG: /* 32 bits */ + .word 0xfffecc0c +REG_TC_EMIFS_CS0_CONFIG: /* 32 bits */ + .word 0xfffecc10 +REG_TC_EMIFS_CS1_CONFIG: /* 32 bits */ + .word 0xfffecc14 +REG_TC_EMIFS_CS2_CONFIG: /* 32 bits */ + .word 0xfffecc18 +REG_TC_EMIFS_CS3_CONFIG: /* 32 bits */ + .word 0xfffecc1c + +#ifdef CONFIG_H2_OMAP1610 +REG_TC_EMIFS_CS1_ADVANCED: /* 32 bits */ + .word 0xfffecc54 +#endif + +/* MPU clock/reset/power mode control registers */ +REG_ARM_CKCTL: /* 16 bits */ + .word 0xfffece00 + +REG_ARM_IDLECT3: /* 16 bits */ + .word 0xfffece24 +REG_ARM_IDLECT2: /* 16 bits */ + .word 0xfffece08 +REG_ARM_IDLECT1: /* 16 bits */ + .word 0xfffece04 + +REG_ARM_RSTCT2: /* 16 bits */ + .word 0xfffece14 +REG_ARM_SYSST: /* 16 bits */ + .word 0xfffece18 +/* DPLL control registers */ +REG_DPLL1_CTL: /* 16 bits */ + .word 0xfffecf00 + +/* Watch Dog register */ +/* secure watchdog stop */ +REG_WSPRDOG: + .word 0xfffeb048 +/* watchdog write pending */ +REG_WWPSDOG: + .word 0xfffeb034 + +WSPRDOG_VAL1: + .word 0x0000aaaa +WSPRDOG_VAL2: + .word 0x00005555 + +/* SDRAM config is: auto refresh enabled, 16 bit 4 bank, + counter @8192 rows, 10 ns, 8 burst */ +REG_SDRAM_CONFIG: + .word 0xfffecc20 + +/* Operation register */ +REG_SDRAM_OPERATION: + .word 0xfffecc80 + +/* Manual command register */ +REG_SDRAM_MANUAL_CMD: + .word 0xfffecc84 + +/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ +REG_SDRAM_MRS: + .word 0xfffecc70 + +/* SDRAM MRS (New) config is: CAS latency is 2, burst length 8 */ +REG_SDRAM_EMRS1: + .word 0xfffecc78 + +/* WRT DLL register */ +REG_DLL_WRT_CONTROL: + .word 0xfffecc68 +DLL_WRT_CONTROL_VAL: + .word 0x03f00002 + +/* URD DLL register */ +REG_DLL_URD_CONTROL: + .word 0xfffeccc0 +DLL_URD_CONTROL_VAL: + .word 0x00800002 + +/* LRD DLL register */ +REG_DLL_LRD_CONTROL: + .word 0xfffecccc + +REG_WATCHDOG: + .word 0xfffec808 + +REG_MPU_LOAD_TIMER: + .word 0xfffec600 +REG_MPU_CNTL_TIMER: + .word 0xfffec500 + +/* 96 MHz Samsung Mobile DDR */ +SDRAM_CONFIG_VAL: + .word 0x001200f4 + +DLL_LRD_CONTROL_VAL: + .word 0x00800002 + +VAL_ARM_CKCTL: + .word 0x3000 +VAL_DPLL1_CTL: + .word 0x2830 + +#ifdef CONFIG_OSK_OMAP5912 +VAL_TC_EMIFS_CS0_CONFIG: + .word 0x002130b0 +VAL_TC_EMIFS_CS1_CONFIG: + .word 0x00001131 +VAL_TC_EMIFS_CS2_CONFIG: + .word 0x000055f0 +VAL_TC_EMIFS_CS3_CONFIG: + .word 0x88011131 +#endif + +#ifdef CONFIG_H2_OMAP1610 +VAL_TC_EMIFS_CS0_CONFIG: + .word 0x00203331 +VAL_TC_EMIFS_CS1_CONFIG: + .word 0x8180fff3 +VAL_TC_EMIFS_CS2_CONFIG: + .word 0xf800f22a +VAL_TC_EMIFS_CS3_CONFIG: + .word 0x88011131 +VAL_TC_EMIFS_CS1_ADVANCED: + .word 0x00000022 +#endif + +VAL_TC_EMIFF_SDRAM_CONFIG: + .word 0x010290fc +VAL_TC_EMIFF_MRS: + .word 0x00000027 + +VAL_ARM_IDLECT1: + .word 0x00000400 + +VAL_ARM_IDLECT2: + .word 0x00000886 +VAL_ARM_IDLECT3: + .word 0x00000015 + +WATCHDOG_VAL1: + .word 0x000000f5 +WATCHDOG_VAL2: + .word 0x000000a0 + +VAL_MPU_LOAD_TIMER: + .word 0xffffffff +VAL_MPU_CNTL_TIMER: + .word 0xffffffa1 + +/* command values */ +.equ CMD_SDRAM_NOP, 0x00000000 +.equ CMD_SDRAM_PRECHARGE, 0x00000001 +.equ CMD_SDRAM_AUTOREFRESH, 0x00000002 +.equ CMD_SDRAM_CKE_SET_HIGH, 0x00000007 -- cgit v1.1