From 6d0f6bcf337c5261c08fabe12982178c2c489d76 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 16 Oct 2008 15:01:15 +0200 Subject: rename CFG_ macros to CONFIG_SYS Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD --- board/netstal/hcu5/README.txt | 6 +++--- board/netstal/hcu5/hcu5.c | 24 ++++++++++++------------ board/netstal/hcu5/init.S | 20 ++++++++++---------- board/netstal/hcu5/sdram.c | 6 +++--- board/netstal/hcu5/u-boot.lds | 2 +- 5 files changed, 29 insertions(+), 29 deletions(-) (limited to 'board/netstal/hcu5') diff --git a/board/netstal/hcu5/README.txt b/board/netstal/hcu5/README.txt index 75c0dd7..f649876 100644 --- a/board/netstal/hcu5/README.txt +++ b/board/netstal/hcu5/README.txt @@ -33,7 +33,7 @@ vector and start running. On-Chip Memory -------------- -0xe0010000- 0xe0013fff CFG_OCM_BASE +0xe0010000- 0xe0013fff CONFIG_SYS_OCM_BASE The 440EPx includes a 16K on-chip memory that can be placed however software chooses. @@ -149,7 +149,7 @@ From now on our copy is in RAM and we will run from there, setup bd flash info cpu_init_r: (cpu/ppc4xx/cpu_init.c) peripheral chip select in using defines like - CFG_EBC_PB0A, CFG_EBC_PB0C from hcu5.h + CONFIG_SYS_EBC_PB0A, CONFIG_SYS_EBC_PB0C from hcu5.h mem_malloc_init malloc_bin_reloc spi_init (r or f)??? (CONFIG_ENV_IS_IN_EEPROM) @@ -168,4 +168,4 @@ include/ppc440.h Drivers for serial etc are found under drivers/ Don't ask question if you did not look at the README !! -Most CFG_* and CONFIG_* switches are mentioned/explained there. +Most CONFIG_SYS_* and CONFIG_* switches are mentioned/explained there. diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index f3428c2..6f4ec29 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -26,7 +26,7 @@ DECLARE_GLOBAL_DATA_PTR; -extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; +extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; #undef BOOTSTRAP_OPTION_A_ACTIVE @@ -40,9 +40,9 @@ extern flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; #define SDR0_ECID2 0x0082 #define SDR0_ECID3 0x0083 -#define SYS_IO_ADDRESS (CFG_CS_2 + 0x00e00000) -#define SYS_SLOT_ADDRESS (CFG_CPLD + 0x00400000) -#define HCU_DIGITAL_IO_REGISTER (CFG_CPLD + 0x0500000) +#define SYS_IO_ADDRESS (CONFIG_SYS_CS_2 + 0x00e00000) +#define SYS_SLOT_ADDRESS (CONFIG_SYS_CPLD + 0x00400000) +#define HCU_DIGITAL_IO_REGISTER (CONFIG_SYS_CPLD + 0x0500000) #define HCU_SW_INSTALL_REQUESTED 0x10 /* @@ -212,7 +212,7 @@ void hcu_led_set(u32 value) */ u32 get_serial_number(void) { - u32 *serial = (u32 *)CFG_FLASH_BASE; + u32 *serial = (u32 *)CONFIG_SYS_FLASH_BASE; if (in_be32(serial) == 0xffffffff) return 0; @@ -243,7 +243,7 @@ int misc_init_r(void) #ifdef CONFIG_ENV_IS_IN_FLASH /* Monitor protection ON by default */ (void)flash_protect(FLAG_PROTECT_SET, - -CFG_MONITOR_LEN, + -CONFIG_SYS_MONITOR_LEN, 0xffffffff, &flash_info[0]); @@ -399,18 +399,18 @@ void pci_target_init(struct pci_controller *hose) */ /* PMM0 Mask/Attribute - disabled b4 setting */ out32r(PCIX0_PMM0MA, 0x00000000); - out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE); + out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ /* 512M + No prefetching, and enable region */ out32r(PCIX0_PMM0MA, 0xE0000001); /* PMM0 Mask/Attribute - disabled b4 setting */ out32r(PCIX0_PMM1MA, 0x00000000); - out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2); + out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ /* 512M + No prefetching, and enable region */ out32r(PCIX0_PMM1MA, 0xE0000001); @@ -426,8 +426,8 @@ void pci_target_init(struct pci_controller *hose) /* Program the board's subsystem id/vendor id */ pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID, - CFG_PCI_SUBSYS_VENDORID); - pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID); + CONFIG_SYS_PCI_SUBSYS_VENDORID); + pci_write_config_word(0, PCI_SUBSYSTEM_ID, CONFIG_SYS_PCI_SUBSYS_ID); /* Configure command register as bus master */ pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER); diff --git a/board/netstal/hcu5/init.S b/board/netstal/hcu5/init.S index d73c861..05b5e38 100644 --- a/board/netstal/hcu5/init.S +++ b/board/netstal/hcu5/init.S @@ -42,7 +42,7 @@ tlbtab: /* TLB#0: vxWorks needs this entry for the Machine Check interrupt, */ tlbentry( 0x40000000, SZ_256M, 0, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB#1: TLB-entry for DDR SDRAM (Up to 2GB) */ - tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, + tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, CONFIG_SYS_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB#2: TLB-entry for EBC */ @@ -53,7 +53,7 @@ tlbtab: * off to use the speed up boot process. It is patched after relocation * to enable SA_I */ - tlbentry( CFG_BOOT_BASE_ADDR, SZ_1M, CFG_BOOT_BASE_ADDR, 1, + tlbentry( CONFIG_SYS_BOOT_BASE_ADDR, SZ_1M, CONFIG_SYS_BOOT_BASE_ADDR, 1, AC_R|AC_W|AC_X|SA_G) /* @@ -63,13 +63,13 @@ tlbtab: */ /* TLB#4: */ - tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 1, + tlbentry( CONFIG_SYS_PCI_MEMBASE1, SZ_256M, CONFIG_SYS_PCI_MEMBASE1, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB#5: */ - tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 1, + tlbentry( CONFIG_SYS_PCI_MEMBASE2, SZ_256M, CONFIG_SYS_PCI_MEMBASE2, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB#6: */ - tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 1, + tlbentry( CONFIG_SYS_PCI_MEMBASE3, SZ_256M, CONFIG_SYS_PCI_MEMBASE3, 1, AC_R|AC_W|SA_G|SA_I ) /* TLB-entry for Internal Registers & OCM */ @@ -87,20 +87,20 @@ tlbtab: /* CAN */ /* TLB#10: */ - tlbentry( CFG_CS_1, SZ_1K, CFG_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_CS_1, SZ_1K, CONFIG_SYS_CS_1, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB#11: CPLD and IMC-Standard 32 MB */ - tlbentry( CFG_CS_2, SZ_16M, CFG_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_CS_2, SZ_16M, CONFIG_SYS_CS_2, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB#12: */ - tlbentry( CFG_CS_2 + 0x1000000, SZ_16M, CFG_CS_2 + 0x1000000, 1, + tlbentry( CONFIG_SYS_CS_2 + 0x1000000, SZ_16M, CONFIG_SYS_CS_2 + 0x1000000, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* IMC-Fast 32 MB */ /* TLB#13: */ - tlbentry( CFG_CS_3, SZ_16M, CFG_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) + tlbentry( CONFIG_SYS_CS_3, SZ_16M, CONFIG_SYS_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) /* TLB#14: */ - tlbentry( CFG_CS_3 + 0x1000000, SZ_16M, CFG_CS_3, 1, + tlbentry( CONFIG_SYS_CS_3 + 0x1000000, SZ_16M, CONFIG_SYS_CS_3, 1, AC_R|AC_W|AC_X|SA_G|SA_I ) tlbtab_end diff --git a/board/netstal/hcu5/sdram.c b/board/netstal/hcu5/sdram.c index e5df62e..f59bd7d 100644 --- a/board/netstal/hcu5/sdram.c +++ b/board/netstal/hcu5/sdram.c @@ -263,20 +263,20 @@ phys_size_t initdram (int board_type) /* * Program tlb entries for this size (dynamic) */ - remove_tlb(CFG_SDRAM_BASE, 256 << 20); + remove_tlb(CONFIG_SYS_SDRAM_BASE, 256 << 20); program_tlb(0, 0, dram_size, TLB_WORD2_W_ENABLE | TLB_WORD2_I_ENABLE); /* * Setup 2nd TLB with same physical address but different virtual * address with cache enabled. This is done for fast ECC generation. */ - program_tlb(0, CFG_DDR_CACHED_ADDR, dram_size, 0); + program_tlb(0, CONFIG_SYS_DDR_CACHED_ADDR, dram_size, 0); #ifdef CONFIG_DDR_ECC /* * If ECC is enabled, initialize the parity bits. */ - program_ecc(CFG_DDR_CACHED_ADDR, dram_size); + program_ecc(CONFIG_SYS_DDR_CACHED_ADDR, dram_size); #endif return (dram_size); diff --git a/board/netstal/hcu5/u-boot.lds b/board/netstal/hcu5/u-boot.lds index c72e5ba..f857ef3 100644 --- a/board/netstal/hcu5/u-boot.lds +++ b/board/netstal/hcu5/u-boot.lds @@ -136,7 +136,7 @@ SECTIONS *(COMMON) } - ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CFG_MONITOR_BASE, CFG_MONITOR_LEN and TEXT_BASE may need to be modified."); + ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified."); _end = . ; PROVIDE (end = .); -- cgit v1.1