From 9cec2fc209a000655af77256a39ede7c7d441e56 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 12 Aug 2010 13:52:53 +0700 Subject: avr32: Use uncached() macro to get an address for SDRAM init The paging system which is required to set up caching properties has not yet been initialized when the SDRAM is initialized. So when the map_physmem() function is converted to return the physical address unchanged, the SDRAM initialization will break on some boards. The avr32-specific uncached() macro will return an address which will always cause uncached accessed to be made. Since this happens in the board code, using avr32-specific features should be ok, and will allow the SDRAM initialization to keep working. Signed-off-by: Haavard Skinnemoen --- board/mimc/mimc200/mimc200.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'board/mimc/mimc200') diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c index cc0f137..9940669 100644 --- a/board/mimc/mimc200/mimc200.c +++ b/board/mimc/mimc200/mimc200.c @@ -153,13 +153,11 @@ phys_size_t initdram(int board_type) unsigned long actual_size; void *sdram_base; - sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + sdram_base = uncached(EBI_SDRAM_BASE); expected_size = sdram_init(sdram_base, &sdram_config); actual_size = get_ram_size(sdram_base, expected_size); - unmap_physmem(sdram_base, EBI_SDRAM_SIZE); - if (expected_size != actual_size) printf("Warning: Only %lu of %lu MiB SDRAM is working\n", actual_size >> 20, expected_size >> 20); -- cgit v1.1