From 04e6c38b766eaa2f3287561563c9e215e0c3a0d4 Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Wed, 4 Jul 2007 10:06:30 +0200 Subject: ppc4xx: Update lwmon5 board - Add optional ECC generation routine to preserve existing RAM values. This is needed for the Linux log-buffer support - Add optional DDR2 setup with CL=4 - GPIO50 not used anymore - Lime register setup added Signed-off-by: Stefan Roese --- board/lwmon5/sdram.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 64 insertions(+) (limited to 'board/lwmon5/sdram.c') diff --git a/board/lwmon5/sdram.c b/board/lwmon5/sdram.c index 85811ad..9a4a8ee 100644 --- a/board/lwmon5/sdram.c +++ b/board/lwmon5/sdram.c @@ -474,8 +474,27 @@ static void program_ecc(u32 start_address, blank_string(strlen(str)); } else { /* ECC bit set method for cached memory */ +#if 1 /* test-only: will remove this define later, when ECC problems are solved! */ + /* + * Some boards (like lwmon5) need to preserve the memory + * content upon ECC generation (for the log-buffer). + * Therefore we don't fill the memory with a pattern or + * just zero it, but write the same values back that are + * already in the memory cells. + */ + address_increment = CFG_CACHELINE_SIZE; + end_address = current_address + num_bytes; + + current_address = start_address; + while (current_address < end_address) { + ppcDcbi(current_address); + ppcDcbf(current_address); + current_address += CFG_CACHELINE_SIZE; + } +#else dcbz_area(start_address, num_bytes); dflush(); +#endif } sync(); @@ -518,6 +537,8 @@ long int initdram (int board_type) { u32 val; +#if 0 /* test-only: will remove this define later, when ECC problems are solved! */ + /* CL=3 */ mtsdram(DDR0_02, 0x00000000); mtsdram(DDR0_00, 0x0000190A); @@ -558,6 +579,49 @@ long int initdram (int board_type) mtsdram(DDR0_43, 0x030A0200); mtsdram(DDR0_44, 0x00000003); mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ +#else + /* CL=4 */ + mtsdram(DDR0_02, 0x00000000); + + mtsdram(DDR0_00, 0x0000190A); + mtsdram(DDR0_01, 0x01000000); + mtsdram(DDR0_03, 0x02040803); /* A suitable burst length was taken. CAS is right for our board */ + + mtsdram(DDR0_04, 0x0B030300); + mtsdram(DDR0_05, 0x02020308); + mtsdram(DDR0_06, 0x0003C812); + mtsdram(DDR0_07, 0x00090100); + mtsdram(DDR0_08, 0x03c80001); + mtsdram(DDR0_09, 0x00011D5F); + mtsdram(DDR0_10, 0x00000300); + mtsdram(DDR0_11, 0x000CC800); + mtsdram(DDR0_12, 0x00000003); + mtsdram(DDR0_14, 0x00000000); + mtsdram(DDR0_17, 0x1e000000); + mtsdram(DDR0_18, 0x1e1e1e1e); + mtsdram(DDR0_19, 0x1e1e1e1e); + mtsdram(DDR0_20, 0x0B0B0B0B); + mtsdram(DDR0_21, 0x0B0B0B0B); +#ifdef CONFIG_DDR_ECC + mtsdram(DDR0_22, 0x00267F0B | DDR0_22_CTRL_RAW_ECC_ENABLE); /* enable ECC */ +#else + mtsdram(DDR0_22, 0x00267F0B); +#endif + + mtsdram(DDR0_23, 0x01000000); + mtsdram(DDR0_24, 0x01010001); + + mtsdram(DDR0_26, 0x2D93028A); + mtsdram(DDR0_27, 0x0784682B); + + mtsdram(DDR0_28, 0x00000080); + mtsdram(DDR0_31, 0x00000000); + mtsdram(DDR0_42, 0x01000008); + + mtsdram(DDR0_43, 0x050A0200); + mtsdram(DDR0_44, 0x00000005); + mtsdram(DDR0_02, 0x00000001); /* Activate the denali core */ +#endif wait_for_dlllock(); -- cgit v1.1