From 0608e04da9d0df5d00cf48a1d9141e2ea1bc9635 Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 25 Mar 2004 19:29:38 +0000 Subject: * Patch by Klaus Heydeck, 13 Mar 2003: Add support for KUP4X Board --- board/kup/kup4k/kup4k.c | 458 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 458 insertions(+) create mode 100644 board/kup/kup4k/kup4k.c (limited to 'board/kup/kup4k/kup4k.c') diff --git a/board/kup/kup4k/kup4k.c b/board/kup/kup4k/kup4k.c new file mode 100644 index 0000000..8bed3d5 --- /dev/null +++ b/board/kup/kup4k/kup4k.c @@ -0,0 +1,458 @@ +/* + * (C) Copyright 2000-2004 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * Klaus Heydeck, Kieback & Peter GmbH & Co KG, heydeck@kieback-peter.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include "../common/kup.h" +#ifdef CONFIG_KUP4K_LOGO + #include "s1d13706.h" +#endif + +#undef DEBUG +#ifdef DEBUG +# define debugk(fmt,args...) printf(fmt ,##args) +#else +# define debugk(fmt,args...) +#endif + +typedef struct { + volatile unsigned char *VmemAddr; + volatile unsigned char *RegAddr; +} FB_INFO_S1D13xxx; + + +/* ------------------------------------------------------------------------- */ + +#if 0 +static long int dram_size (long int, long int *, long int); +#endif + +#ifdef CONFIG_KUP4K_LOGO +void lcd_logo(bd_t *bd); +#endif + + +/* ------------------------------------------------------------------------- */ + +#define _NOT_USED_ 0xFFFFFFFF + +const uint sdram_table[] = { + /* + * Single Read. (Offset 0 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00, + 0x1FF77C47, /* last */ + + /* + * SDRAM Initialization (offset 5 in UPMA RAM) + * + * This is no UPM entry point. The following definition uses + * the remaining space to establish an initialization + * sequence, which is executed by a RUN command. + * + */ + 0x1FF77C35, 0xEFEABC34, 0x1FB57C35, /* last */ + + /* + * Burst Read. (Offset 8 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00, + 0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Single Write. (Offset 18 in UPMA RAM) + */ + 0x1F27FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Burst Write. (Offset 20 in UPMA RAM) + */ + 0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00, + 0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */ + _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Refresh (Offset 30 in UPMA RAM) + */ + 0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04, + 0xFFFFFC84, 0xFFFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, + _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_, + + /* + * Exception. (Offset 3c in UPMA RAM) + */ + 0x7FFFFC07, /* last */ + _NOT_USED_, _NOT_USED_, _NOT_USED_, +}; + +/* ------------------------------------------------------------------------- */ + + +/* + * Check Board Identity: + */ + +int checkboard (void) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + uchar *latch,rev,mod; + + /* + * Init ChipSelect #4 (CAN + HW-Latch) + */ + immap->im_memctl.memc_or4 = 0xFFFF8926; + immap->im_memctl.memc_br4 = 0x90000401; + + latch=(uchar *)0x90000200; + rev = (*latch & 0xF8) >> 3; + mod=(*latch & 0x03); + printf ("Board: KUP4K Rev %d.%d SN: %s\n",rev,mod,getenv("ethaddr")); + return (0); +} + +/* ------------------------------------------------------------------------- */ + +long int initdram (int board_type) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + long int size_b0 = 0; + long int size_b1 = 0; + long int size_b2 = 0; + + upmconfig (UPMA, (uint *) sdram_table, + sizeof (sdram_table) / sizeof (uint)); + + /* + * Preliminary prescaler for refresh (depends on number of + * banks): This value is selected for four cycles every 62.4 us + * with two SDRAM banks or four cycles every 31.2 us with one + * bank. It will be adjusted after memory sizing. + */ + memctl->memc_mptpr = CFG_MPTPR; + + memctl->memc_mar = 0x00000088; + + /* + * Map controller banks 1 and 2 to the SDRAM banks 2 and 3 at + * preliminary addresses - these have to be modified after the + * SDRAM size has been determined. + */ +/* memctl->memc_or1 = CFG_OR1_PRELIM; */ +/* memctl->memc_br1 = CFG_BR1_PRELIM; */ + +/* memctl->memc_or2 = CFG_OR2_PRELIM; */ +/* memctl->memc_br2 = CFG_BR2_PRELIM; */ + + + memctl->memc_mamr = CFG_MAMR & (~(MAMR_PTAE)); /* no refresh yet */ + + udelay (200); + + /* perform SDRAM initializsation sequence */ + + memctl->memc_mcr = 0x80002105; /* SDRAM bank 0 */ + udelay (1); + memctl->memc_mcr = 0x80002830; /* SDRAM bank 0 - execute twice */ + udelay (1); + memctl->memc_mcr = 0x80002106; /* SDRAM bank 0 - RUN MRS Pattern from loc 6 */ + udelay (1); + + memctl->memc_mcr = 0x80004105; /* SDRAM bank 1 */ + udelay (1); + memctl->memc_mcr = 0x80004830; /* SDRAM bank 1 - execute twice */ + udelay (1); + memctl->memc_mcr = 0x80004106; /* SDRAM bank 1 - RUN MRS Pattern from loc 6 */ + udelay (1); + + memctl->memc_mcr = 0x80006105; /* SDRAM bank 2 */ + udelay (1); + memctl->memc_mcr = 0x80006830; /* SDRAM bank 2 - execute twice */ + udelay (1); + memctl->memc_mcr = 0x80006106; /* SDRAM bank 2 - RUN MRS Pattern from loc 6 */ + udelay (1); + + memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */ + udelay (1000); + +#if 0 /* 3 x 8MB */ + size_b0 = 0x00800000; + size_b1 = 0x00800000; + size_b2 = 0x00800000; + memctl->memc_mptpr = CFG_MPTPR; + udelay (1000); + memctl->memc_or1 = 0xFF800A00; + memctl->memc_br1 = 0x00000081; + memctl->memc_or2 = 0xFF000A00; + memctl->memc_br2 = 0x00800081; + memctl->memc_or3 = 0xFE000A00; + memctl->memc_br3 = 0x01000081; +#else /* 3 x 16 MB */ + size_b0 = 0x01000000; + size_b1 = 0x01000000; + size_b2 = 0x01000000; + memctl->memc_mptpr = CFG_MPTPR; + udelay (1000); + memctl->memc_or1 = 0xFF000A00; + memctl->memc_br1 = 0x00000081; + memctl->memc_or2 = 0xFE000A00; + memctl->memc_br2 = 0x01000081; + memctl->memc_or3 = 0xFC000A00; + memctl->memc_br3 = 0x02000081; +#endif + + udelay (10000); + + return (size_b0 + size_b1 + size_b2); +} + +/* ------------------------------------------------------------------------- */ + +/* + * Check memory range for valid RAM. A simple memory test determines + * the actually available RAM size between addresses `base' and + * `base + maxsize'. Some (not all) hardware errors are detected: + * - short between address lines + * - short between data lines + */ +#if 0 +static long int dram_size (long int mamr_value, long int *base, + long int maxsize) +{ + volatile immap_t *immap = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl = &immap->im_memctl; + volatile long int *addr; + ulong cnt, val; + ulong save[32]; /* to make test non-destructive */ + unsigned char i = 0; + + memctl->memc_mamr = mamr_value; + + for (cnt = maxsize / sizeof (long); cnt > 0; cnt >>= 1) { + addr = base + cnt; /* pointer arith! */ + + save[i++] = *addr; + *addr = ~cnt; + } + + /* write 0 to base address */ + addr = base; + save[i] = *addr; + *addr = 0; + + /* check at base address */ + if ((val = *addr) != 0) { + *addr = save[i]; + return (0); + } + + for (cnt = 1; cnt <= maxsize / sizeof (long); cnt <<= 1) { + addr = base + cnt; /* pointer arith! */ + + val = *addr; + *addr = save[--i]; + + if (val != (~cnt)) { + return (cnt * sizeof (long)); + } + } + return (maxsize); +} +#endif + +int misc_init_r (void) +{ + DECLARE_GLOBAL_DATA_PTR; + +#ifdef CONFIG_STATUS_LED + volatile immap_t *immap = (immap_t *) CFG_IMMR; +#endif +#ifdef CONFIG_KUP4K_LOGO + bd_t *bd = gd->bd; + + lcd_logo (bd); +#endif /* CONFIG_KUP4K_LOGO */ +#ifdef CONFIG_IDE_LED + /* Configure PA8 as output port */ + immap->im_ioport.iop_padir |= 0x80; + immap->im_ioport.iop_paodr |= 0x80; + immap->im_ioport.iop_papar &= ~0x80; + immap->im_ioport.iop_padat |= 0x80; /* turn it off */ +#endif + setenv("hw","4k"); + poweron_key(); + return (0); +} + +#ifdef CONFIG_KUP4K_LOGO + + +void lcd_logo (bd_t * bd) +{ + FB_INFO_S1D13xxx fb_info; + S1D_INDEX s1dReg; + S1D_VALUE s1dValue; + volatile immap_t *immr = (immap_t *) CFG_IMMR; + volatile memctl8xx_t *memctl; + ushort i; + uchar *fb; + int rs, gs, bs; + int r = 8, g = 8, b = 4; + int r1, g1, b1; + int n; + uchar tmp[64]; /* long enough for environment variables */ + int tft = 0; + + immr->im_cpm.cp_pbpar &= ~(PB_LCD_PWM); + immr->im_cpm.cp_pbodr &= ~(PB_LCD_PWM); + immr->im_cpm.cp_pbdat &= ~(PB_LCD_PWM); /* set to 0 = enabled */ + immr->im_cpm.cp_pbdir |= (PB_LCD_PWM); + +/*----------------------------------------------------------------------------- */ +/* Initialize the chip and the frame buffer driver. */ +/*----------------------------------------------------------------------------- */ + memctl = &immr->im_memctl; + + + /* + * Init ChipSelect #5 (S1D13768) + */ + memctl->memc_or5 = 0xFFC007F0; /* 4 MB 17 WS or externel TA */ + memctl->memc_br5 = 0x80080801; /* Start at 0x80080000 */ + + fb_info.VmemAddr = (unsigned char *) (S1D_PHYSICAL_VMEM_ADDR); + fb_info.RegAddr = (unsigned char *) (S1D_PHYSICAL_REG_ADDR); + + if ((((S1D_VALUE *) fb_info.RegAddr)[0] != 0x28) + || (((S1D_VALUE *) fb_info.RegAddr)[1] != 0x14)) { + printf ("Warning:LCD Controller S1D13706 not found\n"); + setenv ("lcd", "none"); + return; + } + + + for (i = 0; i < sizeof(aS1DRegs_prelimn) / sizeof(aS1DRegs_prelimn[0]); i++) { + s1dReg = aS1DRegs_prelimn[i].Index; + s1dValue = aS1DRegs_prelimn[i].Value; + debugk ("s13768 reg: %02x value: %02x\n", + aS1DRegs_prelimn[i].Index, aS1DRegs_prelimn[i].Value); + ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] = + s1dValue; + } + + + n = getenv_r ("lcd", tmp, sizeof (tmp)); + if (n > 0) { + if (!strcmp ("tft", tmp)) + tft = 1; + else + tft = 0; + } +#if 0 + if (((S1D_VALUE *) fb_info.RegAddr)[0xAC] & 0x04) + tft = 0; + else + tft = 1; +#endif + + debugk ("Port=0x%02x -> TFT=%d\n", tft, + ((S1D_VALUE *) fb_info.RegAddr)[0xAC]); + + /* init controller */ + if (!tft) { + for (i = 0; i < sizeof(aS1DRegs_stn) / sizeof(aS1DRegs_stn[0]); i++) { + s1dReg = aS1DRegs_stn[i].Index; + s1dValue = aS1DRegs_stn[i].Value; + debugk ("s13768 reg: %02x value: %02x\n", + aS1DRegs_stn[i].Index, + aS1DRegs_stn[i].Value); + ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof(S1D_VALUE)] = + s1dValue; + } + n = getenv_r ("contrast", tmp, sizeof (tmp)); + ((S1D_VALUE *) fb_info.RegAddr)[0xB3] = + (n > 0) ? (uchar) simple_strtoul (tmp, NULL, 10) * 255 / 100 : 0xA0; + switch (bd->bi_busfreq) { + case 40000000: + ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32; + ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x41; + break; + case 48000000: + ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x22; + ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x34; + break; + default: + printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq); + case 64000000: + ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x32; + ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x66; + break; + } + /* setenv("lcd","stn"); */ + } else { + for (i = 0; i < sizeof(aS1DRegs_tft) / sizeof(aS1DRegs_tft[0]); i++) { + s1dReg = aS1DRegs_tft[i].Index; + s1dValue = aS1DRegs_tft[i].Value; + debugk ("s13768 reg: %02x value: %02x\n", + aS1DRegs_tft[i].Index, + aS1DRegs_tft[i].Value); + ((S1D_VALUE *) fb_info.RegAddr)[s1dReg / sizeof (S1D_VALUE)] = + s1dValue; + } + + switch (bd->bi_busfreq) { + default: + printf ("KUP4K S1D1: unknown busfrequency: %ld assuming 64 MHz\n", bd->bi_busfreq); + case 40000000: + ((S1D_VALUE *) fb_info.RegAddr)[0x05] = 0x42; + ((S1D_VALUE *) fb_info.RegAddr)[0x12] = 0x30; + break; + } + /* setenv("lcd","tft"); */ + } + + /* create and set colormap */ + rs = 256 / (r - 1); + gs = 256 / (g - 1); + bs = 256 / (b - 1); + for (i = 0; i < 256; i++) { + r1 = (rs * ((i / (g * b)) % r)) * 255; + g1 = (gs * ((i / b) % g)) * 255; + b1 = (bs * ((i) % b)) * 255; + debugk ("%d %04x %04x %04x\n", i, r1 >> 4, g1 >> 4, b1 >> 4); + S1D_WRITE_PALETTE (fb_info.RegAddr, i, (r1 >> 4), (g1 >> 4), + (b1 >> 4)); + } + + /* copy bitmap */ + fb = (char *) (fb_info.VmemAddr); + memcpy (fb, (uchar *) CONFIG_KUP4K_LOGO, 320 * 240); +} +#endif /* CONFIG_KUP4K_LOGO */ -- cgit v1.1